nb_lcores*MEMPOOL_CACHE_SIZE), \
(unsigned)8192)
-/*
- * RX and TX Prefetch, Host, and Write-back threshold values should be
- * carefully set for optimal performance. Consult the network
- * controller's datasheet and supporting DPDK documentation for guidance
- * on how these parameters should be set.
- */
-#define RX_PTHRESH 8 /**< Default values of RX prefetch threshold reg. */
-#define RX_HTHRESH 8 /**< Default values of RX host threshold reg. */
-#define RX_WTHRESH 4 /**< Default values of RX write-back threshold reg. */
-
-/*
- * These default values are optimized for use with the Intel(R) 82599 10 GbE
- * Controller and the DPDK ixgbe PMD. Consider using other values for other
- * network controllers and/or network drivers.
- */
-#define TX_PTHRESH 36 /**< Default values of TX prefetch threshold reg. */
-#define TX_HTHRESH 0 /**< Default values of TX host threshold reg. */
-#define TX_WTHRESH 0 /**< Default values of TX write-back threshold reg. */
-
#define MAX_PKT_BURST 32
#define BURST_TX_DRAIN_US 100 /* TX drain every ~100us */
},
};
-static const struct rte_eth_rxconf rx_conf = {
- .rx_thresh = {
- .pthresh = RX_PTHRESH,
- .hthresh = RX_HTHRESH,
- .wthresh = RX_WTHRESH,
- },
- .rx_free_thresh = 32,
-};
-
-static struct rte_eth_txconf tx_conf = {
- .tx_thresh = {
- .pthresh = TX_PTHRESH,
- .hthresh = TX_HTHRESH,
- .wthresh = TX_WTHRESH,
- },
- .tx_free_thresh = 0, /* Use PMD default values */
- .tx_rs_thresh = 0, /* Use PMD default values */
- .txq_flags = (ETH_TXQ_FLAGS_NOMULTSEGS |
- ETH_TXQ_FLAGS_NOVLANOFFL |
- ETH_TXQ_FLAGS_NOXSUMSCTP |
- ETH_TXQ_FLAGS_NOXSUMUDP |
- ETH_TXQ_FLAGS_NOXSUMTCP)
-
-};
-
static struct rte_mempool * pktmbuf_pool[NB_SOCKETS];
#if (APP_LOOKUP_METHOD == APP_LOOKUP_EXACT_MATCH)
#ifdef DO_RFC_1812_CHECKS
/* Check to make sure the packet is valid (RFC1812) */
uint8_t valid_mask = MASK_ALL_PKTS;
- if (is_valid_ipv4_pkt(ipv4_hdr[0], m[0]->pkt.pkt_len) < 0) {
+ if (is_valid_ipv4_pkt(ipv4_hdr[0], m[0]->pkt_len) < 0) {
rte_pktmbuf_free(m[0]);
valid_mask &= EXECLUDE_1ST_PKT;
}
- if (is_valid_ipv4_pkt(ipv4_hdr[1], m[1]->pkt.pkt_len) < 0) {
+ if (is_valid_ipv4_pkt(ipv4_hdr[1], m[1]->pkt_len) < 0) {
rte_pktmbuf_free(m[1]);
valid_mask &= EXECLUDE_2ND_PKT;
}
- if (is_valid_ipv4_pkt(ipv4_hdr[2], m[2]->pkt.pkt_len) < 0) {
+ if (is_valid_ipv4_pkt(ipv4_hdr[2], m[2]->pkt_len) < 0) {
rte_pktmbuf_free(m[2]);
valid_mask &= EXECLUDE_3RD_PKT;
}
- if (is_valid_ipv4_pkt(ipv4_hdr[3], m[3]->pkt.pkt_len) < 0) {
+ if (is_valid_ipv4_pkt(ipv4_hdr[3], m[3]->pkt_len) < 0) {
rte_pktmbuf_free(m[3]);
valid_mask &= EXECLUDE_4TH_PKT;
}
#ifdef DO_RFC_1812_CHECKS
/* Check to make sure the packet is valid (RFC1812) */
- if (is_valid_ipv4_pkt(ipv4_hdr, m->pkt.pkt_len) < 0) {
+ if (is_valid_ipv4_pkt(ipv4_hdr, m->pkt_len) < 0) {
rte_pktmbuf_free(m);
return;
}
printf("jumbo frame is enabled - disabling simple TX path\n");
port_conf.rxmode.jumbo_frame = 1;
- tx_conf.txq_flags = 0;
/* if no max-pkt-len set, use the default value ETHER_MAX_LEN */
if (0 == getopt_long(argc, argvopt, "", &lenopts, &option_index)) {
MAIN(int argc, char **argv)
{
struct lcore_conf *qconf;
+ struct rte_eth_dev_info dev_info;
+ struct rte_eth_txconf *txconf;
int ret;
unsigned nb_ports;
uint16_t queueid;
if (ret < 0)
rte_exit(EXIT_FAILURE, "init_lcore_rx_queues failed\n");
-
- if (rte_eal_pci_probe() < 0)
- rte_exit(EXIT_FAILURE, "Cannot probe PCI\n");
-
nb_ports = rte_eth_dev_count();
if (nb_ports > RTE_MAX_ETHPORTS)
nb_ports = RTE_MAX_ETHPORTS;
printf("txq=%u,%d,%d ", lcore_id, queueid, socketid);
fflush(stdout);
+
+ rte_eth_dev_info_get(portid, &dev_info);
+ txconf = &dev_info.default_txconf;
+ if (port_conf.rxmode.jumbo_frame)
+ txconf->txq_flags = 0;
ret = rte_eth_tx_queue_setup(portid, queueid, nb_txd,
- socketid, &tx_conf);
+ socketid, txconf);
if (ret < 0)
rte_exit(EXIT_FAILURE, "rte_eth_tx_queue_setup: err=%d, "
"port=%d\n", ret, portid);
fflush(stdout);
ret = rte_eth_rx_queue_setup(portid, queueid, nb_rxd,
- socketid, &rx_conf, pktmbuf_pool[socketid]);
+ socketid,
+ NULL,
+ pktmbuf_pool[socketid]);
if (ret < 0)
rte_exit(EXIT_FAILURE, "rte_eth_rx_queue_setup: err=%d,"
"port=%d\n", ret, portid);