#include <rte_branch_prediction.h>
#include <rte_common.h>
+#include <rte_cycles.h>
#include <rte_eal.h>
#include <rte_ethdev.h>
+#include <rte_graph_worker.h>
+#include <rte_launch.h>
+#include <rte_lcore.h>
#include <rte_log.h>
#include <rte_mempool.h>
+#include <rte_node_eth_api.h>
+#include <rte_node_ip4_api.h>
#include <rte_per_lcore.h>
#include <rte_string_fns.h>
#include <rte_vect.h>
#define NB_SOCKETS 8
+/* Static global variables used within this file. */
+static uint16_t nb_rxd = RTE_TEST_RX_DESC_DEFAULT;
+static uint16_t nb_txd = RTE_TEST_TX_DESC_DEFAULT;
+
/**< Ports set in promiscuous mode off by default. */
static int promiscuous_on;
/* Ethernet addresses of ports */
static uint64_t dest_eth_addr[RTE_MAX_ETHPORTS];
+static struct rte_ether_addr ports_eth_addr[RTE_MAX_ETHPORTS];
xmm_t val_eth[RTE_MAX_ETHPORTS];
/* Mask of enabled ports */
struct lcore_rx_queue {
uint16_t port_id;
uint8_t queue_id;
+ char node_name[RTE_NODE_NAMESIZE];
};
/* Lcore conf */
struct lcore_conf {
uint16_t n_rx_queue;
struct lcore_rx_queue rx_queue_list[MAX_RX_QUEUE_PER_LCORE];
+
+ struct rte_graph *graph;
+ char name[RTE_GRAPH_NAMESIZE];
+ rte_graph_t graph_id;
} __rte_cache_aligned;
static struct lcore_conf lcore_conf[RTE_MAX_LCORE];
static struct rte_eth_conf port_conf = {
.rxmode = {
- .mq_mode = ETH_MQ_RX_RSS,
- .max_rx_pkt_len = RTE_ETHER_MAX_LEN,
+ .mq_mode = RTE_ETH_MQ_RX_RSS,
.split_hdr_size = 0,
},
.rx_adv_conf = {
.rss_conf = {
.rss_key = NULL,
- .rss_hf = ETH_RSS_IP,
+ .rss_hf = RTE_ETH_RSS_IP,
},
},
.txmode = {
- .mq_mode = ETH_MQ_TX_NONE,
+ .mq_mode = RTE_ETH_MQ_TX_NONE,
},
};
+static uint32_t max_pkt_len;
+
+static struct rte_mempool *pktmbuf_pool[RTE_MAX_ETHPORTS][NB_SOCKETS];
+
+static struct rte_node_ethdev_config ethdev_conf[RTE_MAX_ETHPORTS];
+
+struct ipv4_l3fwd_lpm_route {
+ uint32_t ip;
+ uint8_t depth;
+ uint8_t if_out;
+};
+
+#define IPV4_L3FWD_LPM_NUM_ROUTES \
+ (sizeof(ipv4_l3fwd_lpm_route_array) / \
+ sizeof(ipv4_l3fwd_lpm_route_array[0]))
+/* 198.18.0.0/16 are set aside for RFC2544 benchmarking. */
+static struct ipv4_l3fwd_lpm_route ipv4_l3fwd_lpm_route_array[] = {
+ {RTE_IPV4(198, 18, 0, 0), 24, 0}, {RTE_IPV4(198, 18, 1, 0), 24, 1},
+ {RTE_IPV4(198, 18, 2, 0), 24, 2}, {RTE_IPV4(198, 18, 3, 0), 24, 3},
+ {RTE_IPV4(198, 18, 4, 0), 24, 4}, {RTE_IPV4(198, 18, 5, 0), 24, 5},
+ {RTE_IPV4(198, 18, 6, 0), 24, 6}, {RTE_IPV4(198, 18, 7, 0), 24, 7},
+};
+
static int
check_lcore_params(void)
{
return -1;
}
- if (lcore == rte_get_master_lcore()) {
- printf("Error: lcore %u is master lcore\n", lcore);
+ if (lcore == rte_get_main_lcore()) {
+ printf("Error: lcore %u is main lcore\n", lcore);
return -1;
}
socketid = rte_lcore_to_socket_id(lcore);
return 0;
}
+static uint8_t
+get_port_n_rx_queues(const uint16_t port)
+{
+ int queue = -1;
+ uint16_t i;
+
+ for (i = 0; i < nb_lcore_params; ++i) {
+ if (lcore_params[i].port_id == port) {
+ if (lcore_params[i].queue_id == queue + 1)
+ queue = lcore_params[i].queue_id;
+ else
+ rte_exit(EXIT_FAILURE,
+ "Queue ids of the port %d must be"
+ " in sequence and must start with 0\n",
+ lcore_params[i].port_id);
+ }
+ }
+
+ return (uint8_t)(++queue);
+}
+
static int
init_lcore_rx_queues(void)
{
" [-P]"
" --config (port,queue,lcore)[,(port,queue,lcore)]"
" [--eth-dest=X,MM:MM:MM:MM:MM:MM]"
- " [--enable-jumbo [--max-pkt-len PKTLEN]]"
+ " [--max-pkt-len PKTLEN]"
" [--no-numa]"
" [--per-port-pool]\n\n"
" --config (port,queue,lcore): Rx queue configuration\n"
" --eth-dest=X,MM:MM:MM:MM:MM:MM: Ethernet destination for "
"port X\n"
- " --enable-jumbo: Enable jumbo frames\n"
- " --max-pkt-len: Under the premise of enabling jumbo,\n"
- " maximum packet length in decimal (64-9600)\n"
+ " --max-pkt-len PKTLEN: maximum packet length in decimal (64-9600)\n"
" --no-numa: Disable numa awareness\n"
" --per-port-pool: Use separate buffer pool per port\n\n",
prgname);
/* Parse hexadecimal string */
pm = strtoul(portmask, &end, 16);
if ((portmask[0] == '\0') || (end == NULL) || (*end != '\0'))
- return -1;
-
- if (pm == 0)
- return -1;
+ return 0;
return pm;
}
#define CMD_LINE_OPT_CONFIG "config"
#define CMD_LINE_OPT_ETH_DEST "eth-dest"
#define CMD_LINE_OPT_NO_NUMA "no-numa"
-#define CMD_LINE_OPT_ENABLE_JUMBO "enable-jumbo"
+#define CMD_LINE_OPT_MAX_PKT_LEN "max-pkt-len"
#define CMD_LINE_OPT_PER_PORT_POOL "per-port-pool"
enum {
/* Long options mapped to a short option */
CMD_LINE_OPT_CONFIG_NUM,
CMD_LINE_OPT_ETH_DEST_NUM,
CMD_LINE_OPT_NO_NUMA_NUM,
- CMD_LINE_OPT_ENABLE_JUMBO_NUM,
+ CMD_LINE_OPT_MAX_PKT_LEN_NUM,
CMD_LINE_OPT_PARSE_PER_PORT_POOL,
};
{CMD_LINE_OPT_CONFIG, 1, 0, CMD_LINE_OPT_CONFIG_NUM},
{CMD_LINE_OPT_ETH_DEST, 1, 0, CMD_LINE_OPT_ETH_DEST_NUM},
{CMD_LINE_OPT_NO_NUMA, 0, 0, CMD_LINE_OPT_NO_NUMA_NUM},
- {CMD_LINE_OPT_ENABLE_JUMBO, 0, 0, CMD_LINE_OPT_ENABLE_JUMBO_NUM},
+ {CMD_LINE_OPT_MAX_PKT_LEN, 1, 0, CMD_LINE_OPT_MAX_PKT_LEN_NUM},
{CMD_LINE_OPT_PER_PORT_POOL, 0, 0, CMD_LINE_OPT_PARSE_PER_PORT_POOL},
{NULL, 0, 0, 0},
};
numa_on = 0;
break;
- case CMD_LINE_OPT_ENABLE_JUMBO_NUM: {
- const struct option lenopts = {"max-pkt-len",
- required_argument, 0, 0};
-
- port_conf.rxmode.offloads |= DEV_RX_OFFLOAD_JUMBO_FRAME;
- port_conf.txmode.offloads |= DEV_TX_OFFLOAD_MULTI_SEGS;
-
- /*
- * if no max-pkt-len set, use the default
- * value RTE_ETHER_MAX_LEN.
- */
- if (getopt_long(argc, argvopt, "", &lenopts,
- &option_index) == 0) {
- ret = parse_max_pkt_len(optarg);
- if (ret < 64 || ret > MAX_JUMBO_PKT_LEN) {
- fprintf(stderr, "Invalid maximum "
- "packet length\n");
- print_usage(prgname);
- return -1;
- }
- port_conf.rxmode.max_rx_pkt_len = ret;
- }
+ case CMD_LINE_OPT_MAX_PKT_LEN_NUM: {
+ max_pkt_len = parse_max_pkt_len(optarg);
break;
}
return ret;
}
+static void
+print_ethaddr(const char *name, const struct rte_ether_addr *eth_addr)
+{
+ char buf[RTE_ETHER_ADDR_FMT_SIZE];
+ rte_ether_format_addr(buf, RTE_ETHER_ADDR_FMT_SIZE, eth_addr);
+ printf("%s%s", name, buf);
+}
+
+static int
+init_mem(uint16_t portid, uint32_t nb_mbuf)
+{
+ uint32_t lcore_id;
+ int socketid;
+ char s[64];
+
+ for (lcore_id = 0; lcore_id < RTE_MAX_LCORE; lcore_id++) {
+ if (rte_lcore_is_enabled(lcore_id) == 0)
+ continue;
+
+ if (numa_on)
+ socketid = rte_lcore_to_socket_id(lcore_id);
+ else
+ socketid = 0;
+
+ if (socketid >= NB_SOCKETS) {
+ rte_exit(EXIT_FAILURE,
+ "Socket %d of lcore %u is out of range %d\n",
+ socketid, lcore_id, NB_SOCKETS);
+ }
+
+ if (pktmbuf_pool[portid][socketid] == NULL) {
+ snprintf(s, sizeof(s), "mbuf_pool_%d:%d", portid,
+ socketid);
+ /* Create a pool with priv size of a cacheline */
+ pktmbuf_pool[portid][socketid] =
+ rte_pktmbuf_pool_create(
+ s, nb_mbuf, MEMPOOL_CACHE_SIZE,
+ RTE_CACHE_LINE_SIZE,
+ RTE_MBUF_DEFAULT_BUF_SIZE, socketid);
+ if (pktmbuf_pool[portid][socketid] == NULL)
+ rte_exit(EXIT_FAILURE,
+ "Cannot init mbuf pool on socket %d\n",
+ socketid);
+ else
+ printf("Allocated mbuf pool on socket %d\n",
+ socketid);
+ }
+ }
+
+ return 0;
+}
+
+/* Check the link status of all ports in up to 9s, and print them finally */
+static void
+check_all_ports_link_status(uint32_t port_mask)
+{
+#define CHECK_INTERVAL 100 /* 100ms */
+#define MAX_CHECK_TIME 90 /* 9s (90 * 100ms) in total */
+ uint8_t count, all_ports_up, print_flag = 0;
+ struct rte_eth_link link;
+ uint16_t portid;
+ int ret;
+ char link_status_text[RTE_ETH_LINK_MAX_STR_LEN];
+
+ printf("\nChecking link status");
+ fflush(stdout);
+ for (count = 0; count <= MAX_CHECK_TIME; count++) {
+ if (force_quit)
+ return;
+ all_ports_up = 1;
+ RTE_ETH_FOREACH_DEV(portid)
+ {
+ if (force_quit)
+ return;
+ if ((port_mask & (1 << portid)) == 0)
+ continue;
+ memset(&link, 0, sizeof(link));
+ ret = rte_eth_link_get_nowait(portid, &link);
+ if (ret < 0) {
+ all_ports_up = 0;
+ if (print_flag == 1)
+ printf("Port %u link get failed: %s\n",
+ portid, rte_strerror(-ret));
+ continue;
+ }
+ /* Print link status if flag set */
+ if (print_flag == 1) {
+ rte_eth_link_to_str(link_status_text,
+ sizeof(link_status_text), &link);
+ printf("Port %d %s\n", portid,
+ link_status_text);
+ continue;
+ }
+ /* Clear all_ports_up flag if any link down */
+ if (link.link_status == RTE_ETH_LINK_DOWN) {
+ all_ports_up = 0;
+ break;
+ }
+ }
+ /* After finally printing all link status, get out */
+ if (print_flag == 1)
+ break;
+
+ if (all_ports_up == 0) {
+ printf(".");
+ fflush(stdout);
+ rte_delay_ms(CHECK_INTERVAL);
+ }
+
+ /* Set the print_flag if all ports up or timeout */
+ if (all_ports_up == 1 || count == (MAX_CHECK_TIME - 1)) {
+ print_flag = 1;
+ printf("Done\n");
+ }
+ }
+}
+
static void
signal_handler(int signum)
{
}
}
+static void
+print_stats(void)
+{
+ const char topLeft[] = {27, '[', '1', ';', '1', 'H', '\0'};
+ const char clr[] = {27, '[', '2', 'J', '\0'};
+ struct rte_graph_cluster_stats_param s_param;
+ struct rte_graph_cluster_stats *stats;
+ const char *pattern = "worker_*";
+
+ /* Prepare stats object */
+ memset(&s_param, 0, sizeof(s_param));
+ s_param.f = stdout;
+ s_param.socket_id = SOCKET_ID_ANY;
+ s_param.graph_patterns = &pattern;
+ s_param.nb_graph_patterns = 1;
+
+ stats = rte_graph_cluster_stats_create(&s_param);
+ if (stats == NULL)
+ rte_exit(EXIT_FAILURE, "Unable to create stats object\n");
+
+ while (!force_quit) {
+ /* Clear screen and move to top left */
+ printf("%s%s", clr, topLeft);
+ rte_graph_cluster_stats_get(stats, 0);
+ rte_delay_ms(1E3);
+ }
+
+ rte_graph_cluster_stats_destroy(stats);
+}
+
+/* Main processing loop. 8< */
+static int
+graph_main_loop(void *conf)
+{
+ struct lcore_conf *qconf;
+ struct rte_graph *graph;
+ uint32_t lcore_id;
+
+ RTE_SET_USED(conf);
+
+ lcore_id = rte_lcore_id();
+ qconf = &lcore_conf[lcore_id];
+ graph = qconf->graph;
+
+ if (!graph) {
+ RTE_LOG(INFO, L3FWD_GRAPH, "Lcore %u has nothing to do\n",
+ lcore_id);
+ return 0;
+ }
+
+ RTE_LOG(INFO, L3FWD_GRAPH,
+ "Entering main loop on lcore %u, graph %s(%p)\n", lcore_id,
+ qconf->name, graph);
+
+ while (likely(!force_quit))
+ rte_graph_walk(graph);
+
+ return 0;
+}
+/* >8 End of main processing loop. */
+
+static uint32_t
+eth_dev_get_overhead_len(uint32_t max_rx_pktlen, uint16_t max_mtu)
+{
+ uint32_t overhead_len;
+
+ if (max_mtu != UINT16_MAX && max_rx_pktlen > max_mtu)
+ overhead_len = max_rx_pktlen - max_mtu;
+ else
+ overhead_len = RTE_ETHER_HDR_LEN + RTE_ETHER_CRC_LEN;
+
+ return overhead_len;
+}
+
+static int
+config_port_max_pkt_len(struct rte_eth_conf *conf,
+ struct rte_eth_dev_info *dev_info)
+{
+ uint32_t overhead_len;
+
+ if (max_pkt_len == 0)
+ return 0;
+
+ if (max_pkt_len < RTE_ETHER_MIN_LEN || max_pkt_len > MAX_JUMBO_PKT_LEN)
+ return -1;
+
+ overhead_len = eth_dev_get_overhead_len(dev_info->max_rx_pktlen,
+ dev_info->max_mtu);
+ conf->rxmode.mtu = max_pkt_len - overhead_len;
+
+ if (conf->rxmode.mtu > RTE_ETHER_MTU)
+ conf->txmode.offloads |= RTE_ETH_TX_OFFLOAD_MULTI_SEGS;
+
+ return 0;
+}
+
int
main(int argc, char **argv)
{
- uint16_t portid;
+ /* Rewrite data of src and dst ether addr */
+ uint8_t rewrite_data[2 * sizeof(struct rte_ether_addr)];
+ /* Graph initialization. 8< */
+ static const char * const default_patterns[] = {
+ "ip4*",
+ "ethdev_tx-*",
+ "pkt_drop",
+ };
+ uint8_t nb_rx_queue, queue, socketid;
+ struct rte_graph_param graph_conf;
+ struct rte_eth_dev_info dev_info;
+ uint32_t nb_ports, nb_conf = 0;
+ uint32_t n_tx_queue, nb_lcores;
+ struct rte_eth_txconf *txconf;
+ uint16_t queueid, portid, i;
+ const char **node_patterns;
+ struct lcore_conf *qconf;
+ uint16_t nb_graphs = 0;
+ uint16_t nb_patterns;
+ uint8_t rewrite_len;
+ uint32_t lcore_id;
int ret;
/* Init EAL */
if (check_port_config() < 0)
rte_exit(EXIT_FAILURE, "check_port_config() failed\n");
+ nb_ports = rte_eth_dev_count_avail();
+ nb_lcores = rte_lcore_count();
+
+ /* Initialize all ports. 8< */
+ RTE_ETH_FOREACH_DEV(portid)
+ {
+ struct rte_eth_conf local_port_conf = port_conf;
+
+ /* Skip ports that are not enabled */
+ if ((enabled_port_mask & (1 << portid)) == 0) {
+ printf("\nSkipping disabled port %d\n", portid);
+ continue;
+ }
+
+ /* Init port */
+ printf("Initializing port %d ... ", portid);
+ fflush(stdout);
+
+ nb_rx_queue = get_port_n_rx_queues(portid);
+ n_tx_queue = nb_lcores;
+ if (n_tx_queue > MAX_TX_QUEUE_PER_PORT)
+ n_tx_queue = MAX_TX_QUEUE_PER_PORT;
+ printf("Creating queues: nb_rxq=%d nb_txq=%u... ",
+ nb_rx_queue, n_tx_queue);
+
+ rte_eth_dev_info_get(portid, &dev_info);
+
+ ret = config_port_max_pkt_len(&local_port_conf, &dev_info);
+ if (ret != 0)
+ rte_exit(EXIT_FAILURE,
+ "Invalid max packet length: %u (port %u)\n",
+ max_pkt_len, portid);
+
+ if (dev_info.tx_offload_capa & RTE_ETH_TX_OFFLOAD_MBUF_FAST_FREE)
+ local_port_conf.txmode.offloads |=
+ RTE_ETH_TX_OFFLOAD_MBUF_FAST_FREE;
+
+ local_port_conf.rx_adv_conf.rss_conf.rss_hf &=
+ dev_info.flow_type_rss_offloads;
+ if (local_port_conf.rx_adv_conf.rss_conf.rss_hf !=
+ port_conf.rx_adv_conf.rss_conf.rss_hf) {
+ printf("Port %u modified RSS hash function based on "
+ "hardware support,"
+ "requested:%#" PRIx64 " configured:%#" PRIx64
+ "\n",
+ portid, port_conf.rx_adv_conf.rss_conf.rss_hf,
+ local_port_conf.rx_adv_conf.rss_conf.rss_hf);
+ }
+
+ ret = rte_eth_dev_configure(portid, nb_rx_queue,
+ n_tx_queue, &local_port_conf);
+ if (ret < 0)
+ rte_exit(EXIT_FAILURE,
+ "Cannot configure device: err=%d, port=%d\n",
+ ret, portid);
+
+ ret = rte_eth_dev_adjust_nb_rx_tx_desc(portid, &nb_rxd,
+ &nb_txd);
+ if (ret < 0)
+ rte_exit(EXIT_FAILURE,
+ "Cannot adjust number of descriptors: err=%d, "
+ "port=%d\n",
+ ret, portid);
+
+ rte_eth_macaddr_get(portid, &ports_eth_addr[portid]);
+ print_ethaddr(" Address:", &ports_eth_addr[portid]);
+ printf(", ");
+ print_ethaddr(
+ "Destination:",
+ (const struct rte_ether_addr *)&dest_eth_addr[portid]);
+ printf(", ");
+
+ /*
+ * prepare src MACs for each port.
+ */
+ rte_ether_addr_copy(
+ &ports_eth_addr[portid],
+ (struct rte_ether_addr *)(val_eth + portid) + 1);
+
+ /* Init memory */
+ if (!per_port_pool) {
+ /* portid = 0; this is *not* signifying the first port,
+ * rather, it signifies that portid is ignored.
+ */
+ ret = init_mem(0, NB_MBUF(nb_ports));
+ } else {
+ ret = init_mem(portid, NB_MBUF(1));
+ }
+ if (ret < 0)
+ rte_exit(EXIT_FAILURE, "init_mem() failed\n");
+
+ /* Init one TX queue per couple (lcore,port) */
+ queueid = 0;
+ for (lcore_id = 0; lcore_id < RTE_MAX_LCORE; lcore_id++) {
+ if (rte_lcore_is_enabled(lcore_id) == 0)
+ continue;
+
+ qconf = &lcore_conf[lcore_id];
+
+ if (numa_on)
+ socketid = (uint8_t)rte_lcore_to_socket_id(
+ lcore_id);
+ else
+ socketid = 0;
+
+ printf("txq=%u,%d,%d ", lcore_id, queueid, socketid);
+ fflush(stdout);
+
+ txconf = &dev_info.default_txconf;
+ txconf->offloads = local_port_conf.txmode.offloads;
+ ret = rte_eth_tx_queue_setup(portid, queueid, nb_txd,
+ socketid, txconf);
+ if (ret < 0)
+ rte_exit(EXIT_FAILURE,
+ "rte_eth_tx_queue_setup: err=%d, "
+ "port=%d\n",
+ ret, portid);
+ queueid++;
+ }
+
+ /* Setup ethdev node config */
+ ethdev_conf[nb_conf].port_id = portid;
+ ethdev_conf[nb_conf].num_rx_queues = nb_rx_queue;
+ ethdev_conf[nb_conf].num_tx_queues = n_tx_queue;
+ if (!per_port_pool)
+ ethdev_conf[nb_conf].mp = pktmbuf_pool[0];
+
+ else
+ ethdev_conf[nb_conf].mp = pktmbuf_pool[portid];
+ ethdev_conf[nb_conf].mp_count = NB_SOCKETS;
+
+ nb_conf++;
+ printf("\n");
+ }
+
+ for (lcore_id = 0; lcore_id < RTE_MAX_LCORE; lcore_id++) {
+ if (rte_lcore_is_enabled(lcore_id) == 0)
+ continue;
+ qconf = &lcore_conf[lcore_id];
+ printf("\nInitializing rx queues on lcore %u ... ", lcore_id);
+ fflush(stdout);
+ /* Init RX queues */
+ for (queue = 0; queue < qconf->n_rx_queue; ++queue) {
+ struct rte_eth_rxconf rxq_conf;
+
+ portid = qconf->rx_queue_list[queue].port_id;
+ queueid = qconf->rx_queue_list[queue].queue_id;
+
+ if (numa_on)
+ socketid = (uint8_t)rte_lcore_to_socket_id(
+ lcore_id);
+ else
+ socketid = 0;
+
+ printf("rxq=%d,%d,%d ", portid, queueid, socketid);
+ fflush(stdout);
+
+ rte_eth_dev_info_get(portid, &dev_info);
+ rxq_conf = dev_info.default_rxconf;
+ rxq_conf.offloads = port_conf.rxmode.offloads;
+ if (!per_port_pool)
+ ret = rte_eth_rx_queue_setup(
+ portid, queueid, nb_rxd, socketid,
+ &rxq_conf, pktmbuf_pool[0][socketid]);
+ else
+ ret = rte_eth_rx_queue_setup(
+ portid, queueid, nb_rxd, socketid,
+ &rxq_conf,
+ pktmbuf_pool[portid][socketid]);
+ if (ret < 0)
+ rte_exit(EXIT_FAILURE,
+ "rte_eth_rx_queue_setup: err=%d, "
+ "port=%d\n",
+ ret, portid);
+
+ /* Add this queue node to its graph */
+ snprintf(qconf->rx_queue_list[queue].node_name,
+ RTE_NODE_NAMESIZE, "ethdev_rx-%u-%u", portid,
+ queueid);
+ }
+
+ /* Alloc a graph to this lcore only if source exists */
+ if (qconf->n_rx_queue)
+ nb_graphs++;
+ }
+
+ printf("\n");
+
+ /* Ethdev node config, skip rx queue mapping */
+ ret = rte_node_eth_config(ethdev_conf, nb_conf, nb_graphs);
+ /* >8 End of graph creation. */
+ if (ret)
+ rte_exit(EXIT_FAILURE, "rte_node_eth_config: err=%d\n", ret);
+
+ /* Start ports */
+ RTE_ETH_FOREACH_DEV(portid)
+ {
+ if ((enabled_port_mask & (1 << portid)) == 0)
+ continue;
+
+ /* Start device */
+ ret = rte_eth_dev_start(portid);
+ if (ret < 0)
+ rte_exit(EXIT_FAILURE,
+ "rte_eth_dev_start: err=%d, port=%d\n", ret,
+ portid);
+
+ /*
+ * If enabled, put device in promiscuous mode.
+ * This allows IO forwarding mode to forward packets
+ * to itself through 2 cross-connected ports of the
+ * target machine.
+ */
+ if (promiscuous_on)
+ rte_eth_promiscuous_enable(portid);
+ }
+
+ printf("\n");
+
+ check_all_ports_link_status(enabled_port_mask);
+
+ /* Graph Initialization */
+ nb_patterns = RTE_DIM(default_patterns);
+ node_patterns = malloc((MAX_RX_QUEUE_PER_LCORE + nb_patterns) *
+ sizeof(*node_patterns));
+ if (!node_patterns)
+ return -ENOMEM;
+ memcpy(node_patterns, default_patterns,
+ nb_patterns * sizeof(*node_patterns));
+
+ memset(&graph_conf, 0, sizeof(graph_conf));
+ graph_conf.node_patterns = node_patterns;
+
+ for (lcore_id = 0; lcore_id < RTE_MAX_LCORE; lcore_id++) {
+ rte_graph_t graph_id;
+ rte_edge_t i;
+
+ if (rte_lcore_is_enabled(lcore_id) == 0)
+ continue;
+
+ qconf = &lcore_conf[lcore_id];
+
+ /* Skip graph creation if no source exists */
+ if (!qconf->n_rx_queue)
+ continue;
+
+ /* Add rx node patterns of this lcore */
+ for (i = 0; i < qconf->n_rx_queue; i++) {
+ graph_conf.node_patterns[nb_patterns + i] =
+ qconf->rx_queue_list[i].node_name;
+ }
+
+ graph_conf.nb_node_patterns = nb_patterns + i;
+ graph_conf.socket_id = rte_lcore_to_socket_id(lcore_id);
+
+ snprintf(qconf->name, sizeof(qconf->name), "worker_%u",
+ lcore_id);
+
+ graph_id = rte_graph_create(qconf->name, &graph_conf);
+ if (graph_id == RTE_GRAPH_ID_INVALID)
+ rte_exit(EXIT_FAILURE,
+ "rte_graph_create(): graph_id invalid"
+ " for lcore %u\n", lcore_id);
+
+ qconf->graph_id = graph_id;
+ qconf->graph = rte_graph_lookup(qconf->name);
+ /* >8 End of graph initialization. */
+ if (!qconf->graph)
+ rte_exit(EXIT_FAILURE,
+ "rte_graph_lookup(): graph %s not found\n",
+ qconf->name);
+ }
+
+ memset(&rewrite_data, 0, sizeof(rewrite_data));
+ rewrite_len = sizeof(rewrite_data);
+
+ /* Add route to ip4 graph infra. 8< */
+ for (i = 0; i < IPV4_L3FWD_LPM_NUM_ROUTES; i++) {
+ char route_str[INET6_ADDRSTRLEN * 4];
+ char abuf[INET6_ADDRSTRLEN];
+ struct in_addr in;
+ uint32_t dst_port;
+
+ /* Skip unused ports */
+ if ((1 << ipv4_l3fwd_lpm_route_array[i].if_out &
+ enabled_port_mask) == 0)
+ continue;
+
+ dst_port = ipv4_l3fwd_lpm_route_array[i].if_out;
+
+ in.s_addr = htonl(ipv4_l3fwd_lpm_route_array[i].ip);
+ snprintf(route_str, sizeof(route_str), "%s / %d (%d)",
+ inet_ntop(AF_INET, &in, abuf, sizeof(abuf)),
+ ipv4_l3fwd_lpm_route_array[i].depth,
+ ipv4_l3fwd_lpm_route_array[i].if_out);
+
+ /* Use route index 'i' as next hop id */
+ ret = rte_node_ip4_route_add(
+ ipv4_l3fwd_lpm_route_array[i].ip,
+ ipv4_l3fwd_lpm_route_array[i].depth, i,
+ RTE_NODE_IP4_LOOKUP_NEXT_REWRITE);
+
+ if (ret < 0)
+ rte_exit(EXIT_FAILURE,
+ "Unable to add ip4 route %s to graph\n",
+ route_str);
+
+ memcpy(rewrite_data, val_eth + dst_port, rewrite_len);
+
+ /* Add next hop rewrite data for id 'i' */
+ ret = rte_node_ip4_rewrite_add(i, rewrite_data,
+ rewrite_len, dst_port);
+ if (ret < 0)
+ rte_exit(EXIT_FAILURE,
+ "Unable to add next hop %u for "
+ "route %s\n", i, route_str);
+
+ RTE_LOG(INFO, L3FWD_GRAPH, "Added route %s, next_hop %u\n",
+ route_str, i);
+ }
+ /* >8 End of adding route to ip4 graph infa. */
+
+ /* Launch per-lcore init on every worker lcore */
+ rte_eal_mp_remote_launch(graph_main_loop, NULL, SKIP_MAIN);
+
+ /* Accumulate and print stats on main until exit */
+ if (rte_graph_has_stats_feature())
+ print_stats();
+
+ /* Wait for worker cores to exit */
+ ret = 0;
+ RTE_LCORE_FOREACH_WORKER(lcore_id) {
+ ret = rte_eal_wait_lcore(lcore_id);
+ /* Destroy graph */
+ if (ret < 0 || rte_graph_destroy(
+ rte_graph_from_name(lcore_conf[lcore_id].name))) {
+ ret = -1;
+ break;
+ }
+ }
+ free(node_patterns);
+
+ /* Stop ports */
+ RTE_ETH_FOREACH_DEV(portid) {
+ if ((enabled_port_mask & (1 << portid)) == 0)
+ continue;
+ printf("Closing port %d...", portid);
+ ret = rte_eth_dev_stop(portid);
+ if (ret != 0)
+ printf("Failed to stop port %u: %s\n",
+ portid, rte_strerror(-ret));
+ rte_eth_dev_close(portid);
+ printf(" Done\n");
+ }
+
+ /* clean up the EAL */
+ rte_eal_cleanup();
printf("Bye...\n");
return ret;