#define RTE_LOGTYPE_LSI RTE_LOGTYPE_USER1
-#define LSI_MAX_PORTS 32
-
#define MBUF_SIZE (2048 + sizeof(struct rte_mbuf) + RTE_PKTMBUF_HEADROOM)
#define NB_MBUF 8192
#define TX_WTHRESH 0 /**< Default values of TX write-back threshold reg. */
#define MAX_PKT_BURST 32
-#define BURST_TX_DRAIN 200000ULL /* around 100us at 2 Ghz */
-
-#define SOCKET0 0
+#define BURST_TX_DRAIN_US 100 /* TX drain every ~100us */
/*
* Configurable number of RX/TX ring descriptors
static uint16_t nb_txd = RTE_TEST_TX_DESC_DEFAULT;
/* ethernet addresses of ports */
-static struct ether_addr lsi_ports_eth_addr[LSI_MAX_PORTS];
+static struct ether_addr lsi_ports_eth_addr[RTE_MAX_ETHPORTS];
/* mask of enabled ports */
static uint32_t lsi_enabled_port_mask = 0;
static unsigned int lsi_rx_queue_per_lcore = 1;
/* destination port for L2 forwarding */
-static unsigned lsi_dst_ports[LSI_MAX_PORTS] = {0};
+static unsigned lsi_dst_ports[RTE_MAX_ETHPORTS] = {0};
#define MAX_PKT_BURST 32
struct mbuf_table {
unsigned n_rx_port;
unsigned rx_port_list[MAX_RX_QUEUE_PER_LCORE];
unsigned tx_queue_id;
- struct mbuf_table tx_mbufs[LSI_MAX_PORTS];
+ struct mbuf_table tx_mbufs[RTE_MAX_ETHPORTS];
} __rte_cache_aligned;
struct lcore_queue_conf lcore_queue_conf[RTE_MAX_LCORE];
.hw_strip_crc = 0, /**< CRC stripped by hardware */
},
.txmode = {
- .mq_mode = ETH_DCB_NONE,
+ .mq_mode = ETH_MQ_TX_NONE,
},
.intr_conf = {
.lsc = 1, /**< lsc interrupt feature enabled */
uint64_t rx;
uint64_t dropped;
} __rte_cache_aligned;
-struct lsi_port_statistics port_statistics[LSI_MAX_PORTS];
+struct lsi_port_statistics port_statistics[RTE_MAX_ETHPORTS];
/* A tsc-based timer responsible for triggering statistics printout */
#define TIMER_MILLISECOND 2000000ULL /* around 1ms at 2 Ghz */
printf("\nPort statistics ====================================");
- for (portid = 0; portid < LSI_MAX_PORTS; portid++) {
+ for (portid = 0; portid < RTE_MAX_ETHPORTS; portid++) {
/* skip ports that are not enabled */
if ((lsi_enabled_port_mask & (1 << portid)) == 0)
continue;
struct rte_mbuf *pkts_burst[MAX_PKT_BURST];
struct rte_mbuf *m;
unsigned lcore_id;
- uint64_t prev_tsc = 0;
- uint64_t diff_tsc, cur_tsc, timer_tsc;
+ uint64_t prev_tsc, diff_tsc, cur_tsc, timer_tsc;
unsigned i, j, portid, nb_rx;
struct lcore_queue_conf *qconf;
+ const uint64_t drain_tsc = (rte_get_tsc_hz() + US_PER_S - 1) / US_PER_S * BURST_TX_DRAIN_US;
+ prev_tsc = 0;
timer_tsc = 0;
lcore_id = rte_lcore_id();
if (qconf->n_rx_port == 0) {
RTE_LOG(INFO, LSI, "lcore %u has nothing to do\n", lcore_id);
- while(1);
+ return;
}
RTE_LOG(INFO, LSI, "entering main loop on lcore %u\n", lcore_id);
* TX burst queue drain
*/
diff_tsc = cur_tsc - prev_tsc;
- if (unlikely(diff_tsc > BURST_TX_DRAIN)) {
+ if (unlikely(diff_tsc > drain_tsc)) {
/* this could be optimized (use queueid instead of
* portid), but it is not called so often */
- for (portid = 0; portid < LSI_MAX_PORTS; portid++) {
+ for (portid = 0; portid < RTE_MAX_ETHPORTS; portid++) {
if (qconf->tx_mbufs[portid].len == 0)
continue;
lsi_send_burst(&lcore_queue_conf[lcore_id],
struct lcore_queue_conf *qconf;
struct rte_eth_dev_info dev_info;
int ret;
- unsigned int nb_ports;
- unsigned portid, portid_last = 0;
+ uint8_t nb_ports;
+ uint8_t portid, portid_last = 0;
unsigned lcore_id, rx_lcore_id;
unsigned nb_ports_in_mask = 0;
sizeof(struct rte_pktmbuf_pool_private),
rte_pktmbuf_pool_init, NULL,
rte_pktmbuf_init, NULL,
- SOCKET0, 0);
+ rte_socket_id(), 0);
if (lsi_pktmbuf_pool == NULL)
rte_panic("Cannot init mbuf pool\n");
if (nb_ports == 0)
rte_panic("No Ethernet port - bye\n");
- if (nb_ports > LSI_MAX_PORTS)
- nb_ports = LSI_MAX_PORTS;
+ if (nb_ports > RTE_MAX_ETHPORTS)
+ nb_ports = RTE_MAX_ETHPORTS;
/*
* Each logical core is assigned a dedicated TX queue on each port.
nb_ports_in_mask++;
- rte_eth_dev_info_get((uint8_t) portid, &dev_info);
+ rte_eth_dev_info_get(portid, &dev_info);
}
if (nb_ports_in_mask < 2 || nb_ports_in_mask % 2)
rte_exit(EXIT_FAILURE, "Current enabled port number is %u, "
qconf->rx_port_list[qconf->n_rx_port] = portid;
qconf->n_rx_port++;
- printf("Lcore %u: RX port %u\n",rx_lcore_id, portid);
+ printf("Lcore %u: RX port %u\n",rx_lcore_id, (unsigned) portid);
}
/* Initialise each port */
for (portid = 0; portid < nb_ports; portid++) {
/* skip ports that are not enabled */
if ((lsi_enabled_port_mask & (1 << portid)) == 0) {
- printf("Skipping disabled port %u\n", portid);
+ printf("Skipping disabled port %u\n", (unsigned) portid);
continue;
}
/* init port */
- printf("Initializing port %u... ", portid);
+ printf("Initializing port %u... ", (unsigned) portid);
fflush(stdout);
- ret = rte_eth_dev_configure((uint8_t) portid, 1, 1, &port_conf);
+ ret = rte_eth_dev_configure(portid, 1, 1, &port_conf);
if (ret < 0)
rte_exit(EXIT_FAILURE, "Cannot configure device: err=%d, port=%u\n",
- ret, portid);
+ ret, (unsigned) portid);
/* register lsi interrupt callback, need to be after
* rte_eth_dev_configure(). if (intr_conf.lsc == 0), no
* lsc interrupt will be present, and below callback to
* be registered will never be called.
*/
- rte_eth_dev_callback_register((uint8_t)portid,
+ rte_eth_dev_callback_register(portid,
RTE_ETH_EVENT_INTR_LSC, lsi_event_callback, NULL);
- rte_eth_macaddr_get((uint8_t) portid,
+ rte_eth_macaddr_get(portid,
&lsi_ports_eth_addr[portid]);
/* init one RX queue */
fflush(stdout);
- ret = rte_eth_rx_queue_setup((uint8_t) portid, 0, nb_rxd,
- SOCKET0, &rx_conf,
+ ret = rte_eth_rx_queue_setup(portid, 0, nb_rxd,
+ rte_eth_dev_socket_id(portid), &rx_conf,
lsi_pktmbuf_pool);
if (ret < 0)
- rte_exit(EXIT_FAILURE, "rte_eth_tx_queue_setup: err=%d, port=%u\n",
- ret, portid);
+ rte_exit(EXIT_FAILURE, "rte_eth_rx_queue_setup: err=%d, port=%u\n",
+ ret, (unsigned) portid);
/* init one TX queue logical core on each port */
fflush(stdout);
- ret = rte_eth_tx_queue_setup((uint8_t) portid, 0, nb_txd,
- SOCKET0, &tx_conf);
+ ret = rte_eth_tx_queue_setup(portid, 0, nb_txd,
+ rte_eth_dev_socket_id(portid), &tx_conf);
if (ret < 0)
rte_exit(EXIT_FAILURE, "rte_eth_tx_queue_setup: err=%d,port=%u\n",
- ret, portid);
+ ret, (unsigned) portid);
/* Start device */
- ret = rte_eth_dev_start((uint8_t) portid);
+ ret = rte_eth_dev_start(portid);
if (ret < 0)
rte_exit(EXIT_FAILURE, "rte_eth_dev_start: err=%d, port=%u\n",
- ret, portid);
+ ret, (unsigned) portid);
printf("done:\n");
printf("Port %u, MAC address: %02X:%02X:%02X:%02X:%02X:%02X\n\n",
- portid,
+ (unsigned) portid,
lsi_ports_eth_addr[portid].addr_bytes[0],
lsi_ports_eth_addr[portid].addr_bytes[1],
lsi_ports_eth_addr[portid].addr_bytes[2],
memset(&port_statistics, 0, sizeof(port_statistics));
}
- check_all_ports_link_status((uint8_t)nb_ports, lsi_enabled_port_mask);
+ check_all_ports_link_status(nb_ports, lsi_enabled_port_mask);
/* launch per-lcore init on every lcore */
rte_eal_mp_remote_launch(lsi_launch_one_lcore, NULL, CALL_MASTER);