-/*-
- * BSD LICENSE
- *
- * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of Intel Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2010-2016 Intel Corporation
*/
#include <stdint.h>
#include <string.h>
#include <rte_common.h>
+#include <rte_malloc.h>
#include <rte_memory.h>
#include <rte_memzone.h>
#include <rte_eal.h>
#include <rte_branch_prediction.h>
#include <rte_log.h>
#include <rte_per_lcore.h>
-#include <rte_launch.h>
#include <rte_lcore.h>
#include <rte_ring.h>
#include <rte_launch.h>
-#include <rte_lcore.h>
#include <rte_debug.h>
#include <rte_mempool.h>
#include <rte_mbuf.h>
#include <rte_interrupts.h>
-#include <rte_pci.h>
#include <rte_ether.h>
#include <rte_ethdev.h>
#include <rte_string_fns.h>
* queue to write to. */
static uint8_t client_id = 0;
-struct mbuf_queue {
#define MBQ_CAPACITY 32
- struct rte_mbuf *bufs[MBQ_CAPACITY];
- uint16_t top;
-};
/* maps input ports to output ports for packets */
-static uint8_t output_ports[RTE_MAX_ETHPORTS];
+static uint16_t output_ports[RTE_MAX_ETHPORTS];
/* buffers up a set of packet that are ready to send */
-static struct mbuf_queue output_bufs[RTE_MAX_ETHPORTS];
+struct rte_eth_dev_tx_buffer *tx_buffer[RTE_MAX_ETHPORTS];
/* shared data from server. We update statistics here */
static volatile struct tx_stats *tx_stats;
return 0;
}
+/*
+ * Tx buffer error callback
+ */
+static void
+flush_tx_error_callback(struct rte_mbuf **unsent, uint16_t count,
+ void *userdata) {
+ int i;
+ uint16_t port_id = (uintptr_t)userdata;
+
+ tx_stats->tx_drop[port_id] += count;
+
+ /* free the mbufs which failed from transmit */
+ for (i = 0; i < count; i++)
+ rte_pktmbuf_free(unsent[i]);
+
+}
+
+static void
+configure_tx_buffer(uint16_t port_id, uint16_t size)
+{
+ int ret;
+
+ /* Initialize TX buffers */
+ tx_buffer[port_id] = rte_zmalloc_socket("tx_buffer",
+ RTE_ETH_TX_BUFFER_SIZE(size), 0,
+ rte_eth_dev_socket_id(port_id));
+ if (tx_buffer[port_id] == NULL)
+ rte_exit(EXIT_FAILURE, "Cannot allocate buffer for tx on port %u\n",
+ port_id);
+
+ rte_eth_tx_buffer_init(tx_buffer[port_id], size);
+
+ ret = rte_eth_tx_buffer_set_err_callback(tx_buffer[port_id],
+ flush_tx_error_callback, (void *)(intptr_t)port_id);
+ if (ret < 0)
+ rte_exit(EXIT_FAILURE,
+ "Cannot set error callback for tx buffer on port %u\n",
+ port_id);
+}
+
/*
* set up output ports so that all traffic on port gets sent out
* its paired port. Index using actual port numbers since that is
* what comes in the mbuf structure.
*/
-static void configure_output_ports(const struct port_info *ports)
+static void
+configure_output_ports(const struct port_info *ports)
{
int i;
if (ports->num_ports > RTE_MAX_ETHPORTS)
rte_exit(EXIT_FAILURE, "Too many ethernet ports. RTE_MAX_ETHPORTS = %u\n",
(unsigned)RTE_MAX_ETHPORTS);
for (i = 0; i < ports->num_ports - 1; i+=2){
- uint8_t p1 = ports->id[i];
- uint8_t p2 = ports->id[i+1];
+ uint16_t p1 = ports->id[i];
+ uint16_t p2 = ports->id[i+1];
output_ports[p1] = p2;
output_ports[p2] = p1;
- }
-}
-
-
-static inline void
-send_packets(uint8_t port)
-{
- uint16_t i, sent;
- struct mbuf_queue *mbq = &output_bufs[port];
- if (unlikely(mbq->top == 0))
- return;
+ configure_tx_buffer(p1, MBQ_CAPACITY);
+ configure_tx_buffer(p2, MBQ_CAPACITY);
- sent = rte_eth_tx_burst(port, client_id, mbq->bufs, mbq->top);
- if (unlikely(sent < mbq->top)){
- for (i = sent; i < mbq->top; i++)
- rte_pktmbuf_free(mbq->bufs[i]);
- tx_stats->tx_drop[port] += (mbq->top - sent);
}
- tx_stats->tx[port] += sent;
- mbq->top = 0;
-}
-
-/*
- * Enqueue a packet to be sent on a particular port, but
- * don't send it yet. Only when the buffer is full.
- */
-static inline void
-enqueue_packet(struct rte_mbuf *buf, uint8_t port)
-{
- struct mbuf_queue *mbq = &output_bufs[port];
- mbq->bufs[mbq->top++] = buf;
-
- if (mbq->top == MBQ_CAPACITY)
- send_packets(port);
}
/*
static void
handle_packet(struct rte_mbuf *buf)
{
- const uint8_t in_port = buf->port;
- const uint8_t out_port = output_ports[in_port];
+ int sent;
+ const uint16_t in_port = buf->port;
+ const uint16_t out_port = output_ports[in_port];
+ struct rte_eth_dev_tx_buffer *buffer = tx_buffer[out_port];
+
+ sent = rte_eth_tx_buffer(out_port, client_id, buffer, buf);
+ if (sent)
+ tx_stats->tx[out_port] += sent;
- enqueue_packet(buf, out_port);
}
/*
int need_flush = 0; /* indicates whether we have unsent packets */
int retval;
void *pkts[PKT_READ_SIZE];
+ uint16_t sent;
if ((retval = rte_eal_init(argc, argv)) < 0)
return -1;
if (parse_app_args(argc, argv) < 0)
rte_exit(EXIT_FAILURE, "Invalid command-line arguments\n");
- if (rte_eth_dev_count() == 0)
+ if (rte_eth_dev_count_avail() == 0)
rte_exit(EXIT_FAILURE, "No Ethernet ports - bye\n");
rx_ring = rte_ring_lookup(get_rx_queue_name(client_id));
printf("[Press Ctrl-C to quit ...]\n");
for (;;) {
- uint16_t i, rx_pkts = PKT_READ_SIZE;
- uint8_t port;
-
- /* try dequeuing max possible packets first, if that fails, get the
- * most we can. Loop body should only execute once, maximum */
- while (rx_pkts > 0 &&
- unlikely(rte_ring_dequeue_bulk(rx_ring, pkts, rx_pkts) != 0))
- rx_pkts = (uint16_t)RTE_MIN(rte_ring_count(rx_ring), PKT_READ_SIZE);
-
- if (unlikely(rx_pkts == 0)){
- if (need_flush)
- for (port = 0; port < ports->num_ports; port++)
- send_packets(ports->id[port]);
+ uint16_t i, rx_pkts;
+
+ rx_pkts = rte_ring_dequeue_burst(rx_ring, pkts,
+ PKT_READ_SIZE, NULL);
+
+ if (rx_pkts == 0 && need_flush) {
+ for (i = 0; i < ports->num_ports; i++) {
+ uint16_t port = ports->id[i];
+
+ sent = rte_eth_tx_buffer_flush(port,
+ client_id,
+ tx_buffer[port]);
+ tx_stats->tx[port] += sent;
+ }
need_flush = 0;
continue;
}