-/*-
- * BSD LICENSE
- *
- * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of Intel Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2010-2014 Intel Corporation
*/
#include <stdint.h>
#include <rte_memcpy.h>
#include <rte_mbuf.h>
#include <rte_interrupts.h>
-#include <rte_pci.h>
#include <rte_ether.h>
#include <rte_ethdev.h>
#include <rte_malloc.h>
-#include <rte_fbk_hash.h>
#include <rte_string_fns.h>
#include <rte_cycles.h>
#include "args.h"
#include "init.h"
-#define MBUFS_PER_CLIENT 1536
-#define MBUFS_PER_PORT 1536
#define MBUF_CACHE_SIZE 512
-#define RTE_MP_RX_DESC_DEFAULT 512
-#define RTE_MP_TX_DESC_DEFAULT 512
+#define RTE_MP_RX_DESC_DEFAULT 1024
+#define RTE_MP_TX_DESC_DEFAULT 1024
#define CLIENT_QUEUE_RINGSIZE 128
#define NO_FLAGS 0
static int
init_mbuf_pools(void)
{
- const unsigned num_mbufs = (num_clients * MBUFS_PER_CLIENT) \
- + (ports->num_ports * MBUFS_PER_PORT);
+ const unsigned int num_mbufs_server =
+ RTE_MP_RX_DESC_DEFAULT * ports->num_ports;
+ const unsigned int num_mbufs_client =
+ num_clients * (CLIENT_QUEUE_RINGSIZE +
+ RTE_MP_TX_DESC_DEFAULT * ports->num_ports);
+ const unsigned int num_mbufs_mp_cache =
+ (num_clients + 1) * MBUF_CACHE_SIZE;
+ const unsigned int num_mbufs =
+ num_mbufs_server + num_mbufs_client + num_mbufs_mp_cache;
/* don't pass single-producer/single-consumer flags to mbuf create as it
* seems faster to use a cache instead */
* - start the port and report its status to stdout
*/
static int
-init_port(uint8_t port_num)
+init_port(uint16_t port_num)
{
/* for port configuration all features are off by default */
const struct rte_eth_conf port_conf = {
}
};
const uint16_t rx_rings = 1, tx_rings = num_clients;
- const uint16_t rx_ring_size = RTE_MP_RX_DESC_DEFAULT;
- const uint16_t tx_ring_size = RTE_MP_TX_DESC_DEFAULT;
+ uint16_t rx_ring_size = RTE_MP_RX_DESC_DEFAULT;
+ uint16_t tx_ring_size = RTE_MP_TX_DESC_DEFAULT;
uint16_t q;
int retval;
- printf("Port %u init ... ", (unsigned)port_num);
+ printf("Port %u init ... ", port_num);
fflush(stdout);
/* Standard DPDK port initialisation - config port, then set up
&port_conf)) != 0)
return retval;
+ retval = rte_eth_dev_adjust_nb_rx_tx_desc(port_num, &rx_ring_size,
+ &tx_ring_size);
+ if (retval != 0)
+ return retval;
+
for (q = 0; q < rx_rings; q++) {
retval = rte_eth_rx_queue_setup(port_num, q, rx_ring_size,
rte_eth_dev_socket_id(port_num),
if (retval < 0) return retval;
}
- rte_eth_promiscuous_enable(port_num);
+ retval = rte_eth_promiscuous_enable(port_num);
+ if (retval < 0)
+ return retval;
retval = rte_eth_dev_start(port_num);
if (retval < 0) return retval;
/* Check the link status of all ports in up to 9s, and print them finally */
static void
-check_all_ports_link_status(uint8_t port_num, uint32_t port_mask)
+check_all_ports_link_status(uint16_t port_num, uint32_t port_mask)
{
#define CHECK_INTERVAL 100 /* 100ms */
#define MAX_CHECK_TIME 90 /* 9s (90 * 100ms) in total */
- uint8_t portid, count, all_ports_up, print_flag = 0;
+ uint16_t portid;
+ uint8_t count, all_ports_up, print_flag = 0;
struct rte_eth_link link;
+ int ret;
printf("\nChecking link status");
fflush(stdout);
if ((port_mask & (1 << ports->id[portid])) == 0)
continue;
memset(&link, 0, sizeof(link));
- rte_eth_link_get_nowait(ports->id[portid], &link);
+ ret = rte_eth_link_get_nowait(ports->id[portid], &link);
+ if (ret < 0) {
+ all_ports_up = 0;
+ if (print_flag == 1)
+ printf("Port %u link get failed: %s\n",
+ portid, rte_strerror(-ret));
+ continue;
+ }
/* print link status if flag set */
if (print_flag == 1) {
if (link.link_status)
"Mbps - %s\n", ports->id[portid],
(unsigned)link.link_speed,
(link.link_duplex == ETH_LINK_FULL_DUPLEX) ?
- ("full-duplex") : ("half-duplex\n"));
+ ("full-duplex") : ("half-duplex"));
else
printf("Port %d Link Down\n",
(uint8_t)ports->id[portid]);
continue;
}
/* clear all_ports_up flag if any link down */
- if (link.link_status == 0) {
+ if (link.link_status == ETH_LINK_DOWN) {
all_ports_up = 0;
break;
}
{
int retval;
const struct rte_memzone *mz;
- uint8_t i, total_ports;
+ uint16_t i;
/* init EAL, parsing EAL args */
retval = rte_eal_init(argc, argv);
argc -= retval;
argv += retval;
- /* get total number of ports */
- total_ports = rte_eth_dev_count();
-
/* set up array for port data */
mz = rte_memzone_reserve(MZ_PORT_INFO, sizeof(*ports),
rte_socket_id(), NO_FLAGS);
ports = mz->addr;
/* parse additional, application arguments */
- retval = parse_app_args(total_ports, argc, argv);
+ retval = parse_app_args(argc, argv);
if (retval != 0)
return -1;