/*-
* BSD LICENSE
- *
+ *
* Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
* All rights reserved.
- *
+ *
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
- *
+ *
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* * Neither the name of Intel Corporation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
- *
+ *
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
#include <rte_memory.h>
#include <rte_memcpy.h>
#include <rte_memzone.h>
-#include <rte_tailq.h>
#include <rte_eal.h>
#include <rte_per_lcore.h>
#include <rte_launch.h>
#include <rte_mbuf.h>
#include <rte_malloc.h>
-#include "main.h"
#include "flib.h"
#define RTE_LOGTYPE_L2FWD RTE_LOGTYPE_USER1
CMD_STOP,
};
-/*
- * RX and TX Prefetch, Host, and Write-back threshold values should be
- * carefully set for optimal performance. Consult the network
- * controller's datasheet and supporting DPDK documentation for guidance
- * on how these parameters should be set.
- */
-#define RX_PTHRESH 8 /**< Default values of RX prefetch threshold reg. */
-#define RX_HTHRESH 8 /**< Default values of RX host threshold reg. */
-#define RX_WTHRESH 4 /**< Default values of RX write-back threshold reg. */
-
-/*
- * These default values are optimized for use with the Intel(R) 82599 10 GbE
- * Controller and the DPDK ixgbe PMD. Consider using other values for other
- * network controllers and/or network drivers.
- */
-#define TX_PTHRESH 36 /**< Default values of TX prefetch threshold reg. */
-#define TX_HTHRESH 0 /**< Default values of TX host threshold reg. */
-#define TX_WTHRESH 0 /**< Default values of TX write-back threshold reg. */
-
#define MAX_PKT_BURST 32
#define BURST_TX_DRAIN_US 100 /* TX drain every ~100us */
int flags; /* Set only slave need to restart or recreate */
unsigned lcore_id; /* lcore ID */
unsigned pair_id; /* dependency lcore ID on port */
- char ring_name[2][MAX_NAME_LEN];
+ char ring_name[2][MAX_NAME_LEN];
/* ring[0] for master send cmd, slave read */
/* ring[1] for slave send ack, master read */
- struct rte_ring *ring[2];
+ struct rte_ring *ring[2];
int port_num; /* Total port numbers */
- uint8_t port[RTE_MAX_ETHPORTS]; /* Port id for that lcore to receive packets */
+ uint8_t port[RTE_MAX_ETHPORTS]; /* Port id for that lcore to receive packets */
}__attribute__((packed)) __rte_cache_aligned;
-static struct lcore_resource_struct lcore_resource[RTE_MAX_LCORE];
+static struct lcore_resource_struct lcore_resource[RTE_MAX_LCORE];
static struct rte_mempool *message_pool;
static rte_spinlock_t res_lock = RTE_SPINLOCK_INITIALIZER;
/* use floating processes */
},
};
-static const struct rte_eth_rxconf rx_conf = {
- .rx_thresh = {
- .pthresh = RX_PTHRESH,
- .hthresh = RX_HTHRESH,
- .wthresh = RX_WTHRESH,
- },
-};
-
-static const struct rte_eth_txconf tx_conf = {
- .tx_thresh = {
- .pthresh = TX_PTHRESH,
- .hthresh = TX_HTHRESH,
- .wthresh = TX_WTHRESH,
- },
- .tx_free_thresh = 0, /* Use PMD default values */
- .tx_rs_thresh = 0, /* Use PMD default values */
- .txq_flags = ETH_TXQ_FLAGS_NOMULTSEGS | ETH_TXQ_FLAGS_NOOFFLOADS,
-};
-
static struct rte_mempool * l2fwd_pktmbuf_pool[RTE_MAX_ETHPORTS];
/* Per-port statistics struct */
}
/**
- * This fnciton demonstrates the approach to create ring in first instance
- * or re-attach an existed ring in later instance.
+ * This fnciton demonstrates the approach to create ring in first instance
+ * or re-attach an existed ring in later instance.
**/
static struct rte_ring *
create_ring(const char *name, unsigned count,
if (name == NULL)
return NULL;
-
+
/* If already create, just attached it */
if (likely((ring = rte_ring_lookup(name)) != NULL))
return ring;
}
/* Malloc with rte_malloc on structures that shared by master and slave */
-static int
+static int
l2fwd_malloc_shared_struct(void)
{
port_statistics = rte_zmalloc("port_stat",
}
/* Create ring which used for communicate among master and slave */
-static int
+static int
create_ms_ring(unsigned slaveid)
{
unsigned flag = RING_F_SP_ENQ | RING_F_SC_DEQ;
struct lcore_resource_struct *res = &lcore_resource[slaveid];
unsigned socketid = rte_socket_id();
-
+
/* Always assume create ring on master socket_id */
/* Default only create a ring size 32 */
snprintf(res->ring_name[0], MAX_NAME_LEN, "%s%u",
RING_MASTER_NAME, slaveid);
- if ((res->ring[0] = create_ring(res->ring_name[0], NB_CORE_MSGBUF,
+ if ((res->ring[0] = create_ring(res->ring_name[0], NB_CORE_MSGBUF,
socketid, flag)) == NULL) {
printf("Create m2s ring %s failed\n", res->ring_name[0]);
return -1;
}
-
+
snprintf(res->ring_name[1], MAX_NAME_LEN, "%s%u",
RING_SLAVE_NAME, slaveid);
- if ((res->ring[1] = create_ring(res->ring_name[1], NB_CORE_MSGBUF,
+ if ((res->ring[1] = create_ring(res->ring_name[1], NB_CORE_MSGBUF,
socketid, flag)) == NULL) {
printf("Create s2m ring %s failed\n", res->ring_name[1]);
return -1;
- }
+ }
return 0;
}
/* send command to pair in paired master and slave ring */
-static inline int
+static inline int
sendcmd(unsigned slaveid, enum l2fwd_cmd cmd, int is_master)
{
struct lcore_resource_struct *res = &lcore_resource[slaveid];
/* Only check master, it must be enabled and running if it is slave */
if (is_master && !res->enabled)
return -1;
-
+
if (res->ring[fd] == NULL)
- return -1;
-
+ return -1;
+
if (rte_mempool_get(message_pool, &msg) < 0) {
printf("Error to get message buffer\n");
return -1;
rte_mempool_put(message_pool, msg);
return -1;
}
-
+
return 0;
}
}
/* Master send command to slave and wait until ack received or error met */
-static int
+static int
master_sendcmd_with_ack(unsigned slaveid, enum l2fwd_cmd cmd)
{
enum l2fwd_cmd ack_cmd;
}
/* restart all port that assigned to that slave lcore */
-static int
+static int
reset_slave_all_ports(unsigned slaveid)
{
struct lcore_resource_struct *slave = &lcore_resource[slaveid];
rte_eth_dev_stop(slave->port[i]);
snprintf(buf_name, RTE_MEMPOOL_NAMESIZE, MBUF_NAME, slave->port[i]);
pool = rte_mempool_lookup(buf_name);
- if (pool)
- printf("Port %d mempool free object is %u(%u)\n", slave->port[i],
+ if (pool)
+ printf("Port %d mempool free object is %u(%u)\n", slave->port[i],
rte_mempool_count(pool), (unsigned)NB_MBUF);
else
printf("Can't find mempool %s\n", buf_name);
-
+
printf("Start port :%d\n", slave->port[i]);
ret = rte_eth_dev_start(slave->port[i]);
if (ret != 0)
return ret;
}
-static int
+static int
reset_shared_structures(unsigned slaveid)
{
int ret;
return ret;
}
-/**
- * Call this function to re-create resource that needed for slave process that
+/**
+ * Call this function to re-create resource that needed for slave process that
* exited in last instance
**/
-static int
+static int
init_slave_res(unsigned slaveid)
{
struct lcore_resource_struct *slave = &lcore_resource[slaveid];
enum l2fwd_cmd cmd;
-
+
if (!slave->enabled) {
- printf("Something wrong with lcore=%u enabled=%d\n",slaveid,
+ printf("Something wrong with lcore=%u enabled=%d\n",slaveid,
slave->enabled);
return -1;
}
return 0;
}
-static int
+static int
recreate_one_slave(unsigned slaveid)
{
int ret = 0;
if ((ret = init_slave_res(slaveid)) != 0) {
printf("Init slave=%u failed\n", slaveid);
return ret;
- }
-
+ }
+
if ((ret = flib_remote_launch(l2fwd_launch_one_lcore, NULL, slaveid))
!= 0)
printf("Launch slave %u failed\n", slaveid);
-
+
return ret;
}
return ret;
}
-static void
+static void
slave_exit_cb(unsigned slaveid, __attribute__((unused))int stat)
{
struct lcore_resource_struct *slave = &lcore_resource[slaveid];
unsigned i, j, portid, nb_rx;
struct lcore_queue_conf *qconf;
const uint64_t drain_tsc = (rte_get_tsc_hz() + US_PER_S - 1) / US_PER_S * BURST_TX_DRAIN_US;
-
+
prev_tsc = 0;
lcore_id = rte_lcore_id();
/* If get stop command, stop forwarding and exit */
if (cmd == CMD_STOP) {
return;
- }
+ }
}
-
+
/*
* TX burst queue drain
*/
{NULL, 0, 0, 0}
};
int has_pmask = 0;
-
+
argvopt = argv;
while ((opt = getopt_long(argc, argvopt, "p:q:T:f",
case 'f':
float_proc = 1;
break;
-
+
/* long options */
case 0:
l2fwd_usage(prgname);
}
int
-MAIN(int argc, char **argv)
+main(int argc, char **argv)
{
struct lcore_queue_conf *qconf;
struct rte_eth_dev_info dev_info;
rte_exit(EXIT_FAILURE, "flib init error");
/**
- * Allocated structures that slave lcore would change. For those that slaves are
+ * Allocated structures that slave lcore would change. For those that slaves are
* read only, needn't use malloc to share and global or static variables is ok since
* slave inherit all the knowledge that master initialized.
**/
memset(lcore_resource, 0, sizeof(lcore_resource));
for (i = 0; i < RTE_MAX_LCORE; i++)
lcore_resource[i].lcore_id = i;
-
- /* init driver(s) */
- if (rte_pmd_init_all() < 0)
- rte_exit(EXIT_FAILURE, "Cannot init pmd\n");
-
- if (rte_eal_pci_probe() < 0)
- rte_exit(EXIT_FAILURE, "Cannot probe PCI\n");
nb_ports = rte_eth_dev_count();
if (nb_ports == 0)
for (portid = 0; portid < nb_ports; portid++) {
/* skip ports that are not enabled */
if ((l2fwd_enabled_port_mask & (1 << portid)) == 0)
- continue;
+ continue;
char buf_name[RTE_MEMPOOL_NAMESIZE];
flags = MEMPOOL_F_SP_PUT | MEMPOOL_F_SC_GET;
snprintf(buf_name, RTE_MEMPOOL_NAMESIZE, MBUF_NAME, portid);
/* get the lcore_id for this port */
/* skip master lcore */
while (rte_lcore_is_enabled(rx_lcore_id) == 0 ||
- rte_get_master_lcore() == rx_lcore_id ||
+ rte_get_master_lcore() == rx_lcore_id ||
lcore_queue_conf[rx_lcore_id].n_rx_port ==
l2fwd_rx_queue_per_lcore) {
res = &lcore_resource[rx_lcore_id];
res->enabled = 1;
res->port[res->port_num++] = portid;
-
+
printf("Lcore %u: RX port %u\n", rx_lcore_id, (unsigned) portid);
}
/* init one RX queue */
fflush(stdout);
ret = rte_eth_rx_queue_setup(portid, 0, nb_rxd,
- rte_eth_dev_socket_id(portid), &rx_conf,
+ rte_eth_dev_socket_id(portid),
+ NULL,
l2fwd_pktmbuf_pool[portid]);
if (ret < 0)
rte_exit(EXIT_FAILURE, "rte_eth_rx_queue_setup:err=%d, port=%u\n",
/* init one TX queue on each port */
fflush(stdout);
ret = rte_eth_tx_queue_setup(portid, 0, nb_txd,
- rte_eth_dev_socket_id(portid), &tx_conf);
+ rte_eth_dev_socket_id(portid),
+ NULL);
if (ret < 0)
rte_exit(EXIT_FAILURE, "rte_eth_tx_queue_setup:err=%d, port=%u\n",
ret, (unsigned) portid);
/* Record pair lcore */
/**
- * Since l2fwd example would create pair between different neighbour port, that's
+ * Since l2fwd example would create pair between different neighbour port, that's
* port 0 receive and forward to port 1, the same to port 1, these 2 ports will have
* dependency. If one port stopped working (killed, for example), the port need to
* be stopped/started again. During the time, another port need to wait until stop/start
* procedure completed. So, record the pair relationship for those lcores working
- * on ports.
+ * on ports.
**/
for (portid = 0; portid < nb_ports; portid++) {
uint32_t pair_port;
continue;
for (j = 0; j < lcore_queue_conf[i].n_rx_port;j++) {
if (lcore_queue_conf[i].rx_port_list[j] == portid) {
- lcore = i;
+ lcore = i;
find_lcore = 1;
break;
}
if (lcore_queue_conf[i].rx_port_list[j] == pair_port) {
- pair_lcore = i;
+ pair_lcore = i;
find_pair_lcore = 1;
break;
}
}
/* Create message buffer for all master and slave */
- message_pool = rte_mempool_create("ms_msg_pool",
+ message_pool = rte_mempool_create("ms_msg_pool",
NB_CORE_MSGBUF * RTE_MAX_LCORE,
sizeof(enum l2fwd_cmd), NB_CORE_MSGBUF / 2,
0,
rte_pktmbuf_pool_init, NULL,
rte_pktmbuf_init, NULL,
- rte_socket_id(), 0);
+ rte_socket_id(), 0);
if (message_pool == NULL)
rte_exit(EXIT_FAILURE, "Create msg mempool failed\n");
/* Create ring for each master and slave pair, also register cb when slave leaves */
for (i = 0; i < RTE_MAX_LCORE; i++) {
- /**
- * Only create ring and register slave_exit cb in case that core involved into
+ /**
+ * Only create ring and register slave_exit cb in case that core involved into
* packet forwarding
**/
if (lcore_resource[i].enabled) {
if (flib_register_slave_exit_notify(i,
slave_exit_cb) != 0)
- rte_exit(EXIT_FAILURE,
+ rte_exit(EXIT_FAILURE,
"Register master_trace_slave_exit failed");
}
}
diff_tsc = cur_tsc - prev_tsc;
/* if timer is enabled */
if (timer_period > 0) {
-
+
/* advance the timer */
timer_tsc += diff_tsc;
-
+
/* if timer has reached its timeout */
if (unlikely(timer_tsc >= (uint64_t) timer_period)) {
-
+
print_stats();
/* reset the timer */
timer_tsc = 0;
}
}
-
+
prev_tsc = cur_tsc;
/* Check any slave need restart or recreate */