-/*-
- * BSD LICENSE
- *
- * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of Intel Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2010-2014 Intel Corporation
*/
/*
#include <rte_common.h>
#include <rte_log.h>
#include <rte_memory.h>
-#include <rte_memzone.h>
#include <rte_launch.h>
-#include <rte_tailq.h>
#include <rte_eal.h>
#include <rte_per_lcore.h>
#include <rte_lcore.h>
-#include <rte_debug.h>
#include <rte_atomic.h>
#include <rte_branch_prediction.h>
-#include <rte_ring.h>
#include <rte_debug.h>
#include <rte_interrupts.h>
-#include <rte_pci.h>
#include <rte_ether.h>
#include <rte_ethdev.h>
#include <rte_mempool.h>
#define RTE_LOGTYPE_APP RTE_LOGTYPE_USER1
-#define MBUF_SIZE (2048 + sizeof(struct rte_mbuf) + RTE_PKTMBUF_HEADROOM)
#define NB_MBUFS 64*1024 /* use 64k mbufs */
#define MBUF_CACHE_SIZE 256
#define PKT_BURST 32
-#define RX_RING_SIZE 128
-#define TX_RING_SIZE 512
+#define RX_RING_SIZE 1024
+#define TX_RING_SIZE 1024
#define PARAM_PROC_ID "proc-id"
#define PARAM_NUM_PROCS "num-procs"
unsigned rx;
unsigned tx;
unsigned drop;
-} __attribute__((aligned(CACHE_LINE_SIZE / 2)));
+} __rte_aligned(RTE_CACHE_LINE_SIZE / 2);
static int proc_id = -1;
static unsigned num_procs = 0;
-static uint8_t ports[RTE_MAX_ETHPORTS];
+static uint16_t ports[RTE_MAX_ETHPORTS];
static unsigned num_ports = 0;
static struct lcore_ports lcore_ports[RTE_MAX_LCORE];
int opt, ret;
char **argvopt;
int option_index;
- unsigned i, port_mask = 0;
+ uint16_t i, port_mask = 0;
char *prgname = argv[0];
static struct option lgopts[] = {
{PARAM_NUM_PROCS, 1, 0, 0},
smp_usage(prgname, "Invalid or missing port mask\n");
/* get the port numbers from the port mask */
- for(i = 0; i < rte_eth_dev_count(); i++)
+ RTE_ETH_FOREACH_DEV(i)
if(port_mask & (1 << i))
ports[num_ports++] = (uint8_t)i;
ret = optind-1;
- optind = 0; /* reset getopt lib */
+ optind = 1; /* reset getopt lib */
- return (ret);
+ return ret;
}
/*
* coming from the mbuf_pool passed as parameter
*/
static inline int
-smp_port_init(uint8_t port, struct rte_mempool *mbuf_pool, uint16_t num_queues)
+smp_port_init(uint16_t port, struct rte_mempool *mbuf_pool,
+ uint16_t num_queues)
{
struct rte_eth_conf port_conf = {
.rxmode = {
.mq_mode = ETH_MQ_RX_RSS,
.split_hdr_size = 0,
- .header_split = 0, /**< Header Split disabled */
- .hw_ip_checksum = 1, /**< IP checksum offload enabled */
- .hw_vlan_filter = 0, /**< VLAN filtering disabled */
- .jumbo_frame = 0, /**< Jumbo Frame Support disabled */
- .hw_strip_crc = 0, /**< CRC stripped by hardware */
+ .offloads = DEV_RX_OFFLOAD_CHECKSUM,
},
.rx_adv_conf = {
.rss_conf = {
}
};
const uint16_t rx_rings = num_queues, tx_rings = num_queues;
+ struct rte_eth_dev_info info;
+ struct rte_eth_rxconf rxq_conf;
+ struct rte_eth_txconf txq_conf;
int retval;
uint16_t q;
+ uint16_t nb_rxd = RX_RING_SIZE;
+ uint16_t nb_txd = TX_RING_SIZE;
+ uint64_t rss_hf_tmp;
if (rte_eal_process_type() == RTE_PROC_SECONDARY)
return 0;
- if (port >= rte_eth_dev_count())
+ if (!rte_eth_dev_is_valid_port(port))
return -1;
- printf("# Initialising port %u... ", (unsigned)port);
+ printf("# Initialising port %u... ", port);
fflush(stdout);
+ retval = rte_eth_dev_info_get(port, &info);
+ if (retval != 0) {
+ printf("Error during getting device (port %u) info: %s\n",
+ port, strerror(-retval));
+ return retval;
+ }
+
+ info.default_rxconf.rx_drop_en = 1;
+
+ if (info.tx_offload_capa & DEV_TX_OFFLOAD_MBUF_FAST_FREE)
+ port_conf.txmode.offloads |=
+ DEV_TX_OFFLOAD_MBUF_FAST_FREE;
+
+ rss_hf_tmp = port_conf.rx_adv_conf.rss_conf.rss_hf;
+ port_conf.rx_adv_conf.rss_conf.rss_hf &= info.flow_type_rss_offloads;
+ if (port_conf.rx_adv_conf.rss_conf.rss_hf != rss_hf_tmp) {
+ printf("Port %u modified RSS hash function based on hardware support,"
+ "requested:%#"PRIx64" configured:%#"PRIx64"\n",
+ port,
+ rss_hf_tmp,
+ port_conf.rx_adv_conf.rss_conf.rss_hf);
+ }
+
retval = rte_eth_dev_configure(port, rx_rings, tx_rings, &port_conf);
if (retval < 0)
return retval;
+ retval = rte_eth_dev_adjust_nb_rx_tx_desc(port, &nb_rxd, &nb_txd);
+ if (retval < 0)
+ return retval;
+
+ rxq_conf = info.default_rxconf;
+ rxq_conf.offloads = port_conf.rxmode.offloads;
for (q = 0; q < rx_rings; q ++) {
- retval = rte_eth_rx_queue_setup(port, q, RX_RING_SIZE,
+ retval = rte_eth_rx_queue_setup(port, q, nb_rxd,
rte_eth_dev_socket_id(port),
- NULL,
+ &rxq_conf,
mbuf_pool);
if (retval < 0)
return retval;
}
+ txq_conf = info.default_txconf;
+ txq_conf.offloads = port_conf.txmode.offloads;
for (q = 0; q < tx_rings; q ++) {
- retval = rte_eth_tx_queue_setup(port, q, TX_RING_SIZE,
+ retval = rte_eth_tx_queue_setup(port, q, nb_txd,
rte_eth_dev_socket_id(port),
- NULL);
+ &txq_conf);
if (retval < 0)
return retval;
}
- rte_eth_promiscuous_enable(port);
+ retval = rte_eth_promiscuous_enable(port);
+ if (retval != 0)
+ return retval;
retval = rte_eth_dev_start(port);
if (retval < 0)
assign_ports_to_cores(void)
{
- const unsigned lcores = rte_eal_get_configuration()->lcore_count;
+ const unsigned int lcores = rte_lcore_count();
const unsigned port_pairs = num_ports / 2;
const unsigned pairs_per_lcore = port_pairs / lcores;
unsigned extra_pairs = port_pairs % lcores;
/* Check the link status of all ports in up to 9s, and print them finally */
static void
-check_all_ports_link_status(uint8_t port_num, uint32_t port_mask)
+check_all_ports_link_status(uint16_t port_num, uint32_t port_mask)
{
#define CHECK_INTERVAL 100 /* 100ms */
#define MAX_CHECK_TIME 90 /* 9s (90 * 100ms) in total */
- uint8_t portid, count, all_ports_up, print_flag = 0;
+ uint16_t portid;
+ uint8_t count, all_ports_up, print_flag = 0;
struct rte_eth_link link;
+ int ret;
printf("\nChecking link status");
fflush(stdout);
if ((port_mask & (1 << portid)) == 0)
continue;
memset(&link, 0, sizeof(link));
- rte_eth_link_get_nowait(portid, &link);
+ ret = rte_eth_link_get_nowait(portid, &link);
+ if (ret < 0) {
+ all_ports_up = 0;
+ if (print_flag == 1)
+ printf("Port %u link get failed: %s\n",
+ portid, rte_strerror(-ret));
+ continue;
+ }
/* print link status if flag set */
if (print_flag == 1) {
if (link.link_status)
- printf("Port %d Link Up - speed %u "
- "Mbps - %s\n", (uint8_t)portid,
- (unsigned)link.link_speed,
+ printf(
+ "Port%d Link Up. Speed %u Mbps - %s\n",
+ portid, link.link_speed,
(link.link_duplex == ETH_LINK_FULL_DUPLEX) ?
("full-duplex") : ("half-duplex\n"));
else
- printf("Port %d Link Down\n",
- (uint8_t)portid);
+ printf("Port %d Link Down\n", portid);
continue;
}
/* clear all_ports_up flag if any link down */
- if (link.link_status == 0) {
+ if (link.link_status == ETH_LINK_DOWN) {
all_ports_up = 0;
break;
}
argv += ret;
/* determine the NIC devices available */
- if (rte_eth_dev_count() == 0)
+ if (rte_eth_dev_count_avail() == 0)
rte_exit(EXIT_FAILURE, "No Ethernet ports - bye\n");
/* parse application arguments (those after the EAL ones) */
proc_type = rte_eal_process_type();
mp = (proc_type == RTE_PROC_SECONDARY) ?
rte_mempool_lookup(_SMP_MBUF_POOL) :
- rte_mempool_create(_SMP_MBUF_POOL, NB_MBUFS, MBUF_SIZE,
- MBUF_CACHE_SIZE, sizeof(struct rte_pktmbuf_pool_private),
- rte_pktmbuf_pool_init, NULL,
- rte_pktmbuf_init, NULL,
- rte_socket_id(), 0);
+ rte_pktmbuf_pool_create(_SMP_MBUF_POOL, NB_MBUFS,
+ MBUF_CACHE_SIZE, 0, RTE_MBUF_DEFAULT_BUF_SIZE,
+ rte_socket_id());
if (mp == NULL)
rte_exit(EXIT_FAILURE, "Cannot get memory pool for buffers\n");