/*-
* BSD LICENSE
- *
+ *
* Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
* All rights reserved.
- *
+ *
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
- *
+ *
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* * Neither the name of Intel Corporation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
- *
+ *
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
#include <rte_memory.h>
#include <rte_memzone.h>
#include <rte_launch.h>
-#include <rte_tailq.h>
#include <rte_eal.h>
#include <rte_per_lcore.h>
#include <rte_lcore.h>
#include <rte_debug.h>
#include <rte_atomic.h>
#include <rte_branch_prediction.h>
-#include <rte_ring.h>
#include <rte_debug.h>
#include <rte_interrupts.h>
#include <rte_pci.h>
#define RTE_LOGTYPE_APP RTE_LOGTYPE_USER1
-#define MBUF_SIZE (2048 + sizeof(struct rte_mbuf) + RTE_PKTMBUF_HEADROOM)
#define NB_MBUFS 64*1024 /* use 64k mbufs */
#define MBUF_CACHE_SIZE 256
#define PKT_BURST 32
#define PARAM_PROC_ID "proc-id"
#define PARAM_NUM_PROCS "num-procs"
-/*
- * RX and TX Prefetch, Host, and Write-back threshold values should be
- * carefully set for optimal performance. Consult the network
- * controller's datasheet and supporting DPDK documentation for guidance
- * on how these parameters should be set.
- */
-/* Default configuration for rx and tx thresholds etc. */
-static const struct rte_eth_rxconf rx_conf_default = {
- .rx_thresh = {
- .pthresh = 8,
- .hthresh = 8,
- .wthresh = 4,
- },
-};
-
-/*
- * These default values are optimized for use with the Intel(R) 82599 10 GbE
- * Controller and the DPDK ixgbe PMD. Consider using other values for other
- * network controllers and/or network drivers.
- */
-static const struct rte_eth_txconf tx_conf_default = {
- .tx_thresh = {
- .pthresh = 36,
- .hthresh = 0,
- .wthresh = 0,
- },
- .tx_free_thresh = 0, /* Use PMD default values */
- .tx_rs_thresh = 0, /* Use PMD default values */
-};
-
/* for each lcore, record the elements of the ports array to use */
struct lcore_ports{
unsigned start_port;
unsigned rx;
unsigned tx;
unsigned drop;
-} __attribute__((aligned(CACHE_LINE_SIZE / 2)));
+} __attribute__((aligned(RTE_CACHE_LINE_SIZE / 2)));
static int proc_id = -1;
static unsigned num_procs = 0;
ports[num_ports++] = (uint8_t)i;
ret = optind-1;
- optind = 0; /* reset getopt lib */
+ optind = 1; /* reset getopt lib */
- return (ret);
+ return ret;
}
/*
{
struct rte_eth_conf port_conf = {
.rxmode = {
- .mq_mode = ETH_MQ_RX_RSS,
+ .mq_mode = ETH_MQ_RX_RSS,
.split_hdr_size = 0,
.header_split = 0, /**< Header Split disabled */
.hw_ip_checksum = 1, /**< IP checksum offload enabled */
.rx_adv_conf = {
.rss_conf = {
.rss_key = NULL,
- .rss_hf = ETH_RSS_IPV4 | ETH_RSS_IPV6,
+ .rss_hf = ETH_RSS_IP,
},
},
.txmode = {
}
};
const uint16_t rx_rings = num_queues, tx_rings = num_queues;
+ struct rte_eth_dev_info info;
int retval;
uint16_t q;
printf("# Initialising port %u... ", (unsigned)port);
fflush(stdout);
+ rte_eth_dev_info_get(port, &info);
+ info.default_rxconf.rx_drop_en = 1;
+
retval = rte_eth_dev_configure(port, rx_rings, tx_rings, &port_conf);
if (retval < 0)
return retval;
for (q = 0; q < rx_rings; q ++) {
retval = rte_eth_rx_queue_setup(port, q, RX_RING_SIZE,
- rte_eth_dev_socket_id(port), &rx_conf_default,
+ rte_eth_dev_socket_id(port),
+ &info.default_rxconf,
mbuf_pool);
if (retval < 0)
return retval;
}
for (q = 0; q < tx_rings; q ++) {
- retval = rte_eth_tx_queue_setup(port, q, RX_RING_SIZE,
- rte_eth_dev_socket_id(port), &tx_conf_default);
+ retval = rte_eth_tx_queue_setup(port, q, TX_RING_SIZE,
+ rte_eth_dev_socket_id(port),
+ NULL);
if (retval < 0)
return retval;
}
/* build up message in msgbuf before printing to decrease likelihood
* of multi-core message interleaving.
*/
- msgbufpos += rte_snprintf(msgbuf, sizeof(msgbuf) - msgbufpos,
+ msgbufpos += snprintf(msgbuf, sizeof(msgbuf) - msgbufpos,
"Lcore %u using ports ", id);
for (p = start_port; p < end_port; p++){
- msgbufpos += rte_snprintf(msgbuf + msgbufpos, sizeof(msgbuf) - msgbufpos,
+ msgbufpos += snprintf(msgbuf + msgbufpos, sizeof(msgbuf) - msgbufpos,
"%u ", (unsigned)ports[p]);
}
printf("%s\n", msgbuf);
continue;
}
/* clear all_ports_up flag if any link down */
- if (link.link_status == 0) {
+ if (link.link_status == ETH_LINK_DOWN) {
all_ports_up = 0;
break;
}
argc -= ret;
argv += ret;
- /* probe to determine the NIC devices available */
- proc_type = rte_eal_process_type();
- if (rte_pmd_init_all() < 0)
- rte_exit(EXIT_FAILURE, "Cannot init pmd\n");
- if (rte_eal_pci_probe() < 0)
- rte_exit(EXIT_FAILURE, "Cannot probe PCI\n");
+ /* determine the NIC devices available */
if (rte_eth_dev_count() == 0)
rte_exit(EXIT_FAILURE, "No Ethernet ports - bye\n");
/* parse application arguments (those after the EAL ones) */
smp_parse_args(argc, argv);
+ proc_type = rte_eal_process_type();
mp = (proc_type == RTE_PROC_SECONDARY) ?
rte_mempool_lookup(_SMP_MBUF_POOL) :
- rte_mempool_create(_SMP_MBUF_POOL, NB_MBUFS, MBUF_SIZE,
- MBUF_CACHE_SIZE, sizeof(struct rte_pktmbuf_pool_private),
- rte_pktmbuf_pool_init, NULL,
- rte_pktmbuf_init, NULL,
- rte_socket_id(), 0);
+ rte_pktmbuf_pool_create(_SMP_MBUF_POOL, NB_MBUFS,
+ MBUF_CACHE_SIZE, 0, RTE_MBUF_DEFAULT_BUF_SIZE,
+ rte_socket_id());
if (mp == NULL)
rte_exit(EXIT_FAILURE, "Cannot get memory pool for buffers\n");