/*
* Calculate the number of buffers needed per port
*/
-#define NUM_MBUFS_PER_PORT ((MAX_QUEUES*RTE_TEST_RX_DESC_DEFAULT) + \
+#define NUM_MBUFS_PER_PORT ((MAX_QUEUES*RTE_TEST_RX_DESC_DEFAULT) + \
(num_switching_cores*MAX_PKT_BURST) + \
(num_switching_cores*RTE_TEST_TX_DESC_DEFAULT) +\
(num_switching_cores*MBUF_CACHE_SIZE))
#define MBUF_CACHE_SIZE 64
-#define MBUF_SIZE (2048 + sizeof(struct rte_mbuf) + RTE_PKTMBUF_HEADROOM)
/*
* RX and TX Prefetch, Host, and Write-back threshold values should be
#define TX_HTHRESH 0 /* Default values of TX host threshold reg. */
#define TX_WTHRESH 0 /* Default values of TX write-back threshold reg. */
-#define MAX_PKT_BURST 32 /* Max burst size for RX/TX */
-#define MAX_MRG_PKT_BURST 16 /* Max burst for merge buffers. Set to 1 due to performance issue. */
-#define BURST_TX_DRAIN_US 100 /* TX drain every ~100us */
+#define MAX_PKT_BURST 32 /* Max burst size for RX/TX */
+#define MAX_MRG_PKT_BURST 16 /* Max burst for merge buffers. Set to 1 due to performance issue. */
+#define BURST_TX_DRAIN_US 100 /* TX drain every ~100us */
/* State of virtio device. */
#define DEVICE_NOT_READY 0
/* Enable stats. */
static uint32_t enable_stats = 0;
-/* Default configuration for rx and tx thresholds etc. */
-static const struct rte_eth_rxconf rx_conf_default = {
- .rx_thresh = {
- .pthresh = RX_PTHRESH,
- .hthresh = RX_HTHRESH,
- .wthresh = RX_WTHRESH,
- },
- .rx_drop_en = 1,
-};
-
-/*
- * These default values are optimized for use with the Intel(R) 82599 10 GbE
- * Controller and the DPDK ixgbe/igb PMD. Consider using other values for other
- * network controllers and/or network drivers.
- */
-static const struct rte_eth_txconf tx_conf_default = {
- .tx_thresh = {
- .pthresh = TX_PTHRESH,
- .hthresh = TX_HTHRESH,
- .wthresh = TX_WTHRESH,
- },
- .tx_free_thresh = 0, /* Use PMD default values */
- .tx_rs_thresh = 0, /* Use PMD default values */
-};
-
/* empty vmdq configuration structure. Filled in programatically */
static const struct rte_eth_conf vmdq_conf_default = {
.rxmode = {
port_init(uint8_t port, struct rte_mempool *mbuf_pool)
{
struct rte_eth_dev_info dev_info;
+ struct rte_eth_rxconf *rxconf;
struct rte_eth_conf port_conf;
uint16_t rx_rings, tx_rings = (uint16_t)rte_lcore_count();
const uint16_t rx_ring_size = RTE_TEST_RX_DESC_DEFAULT, tx_ring_size = RTE_TEST_TX_DESC_DEFAULT;
if (retval != 0)
return retval;
+ rte_eth_dev_info_get(port, &dev_info);
+ rxconf = &dev_info.default_rxconf;
+ rxconf->rx_drop_en = 1;
/* Setup the queues. */
for (q = 0; q < rx_rings; q ++) {
retval = rte_eth_rx_queue_setup(port, q, rx_ring_size,
- rte_eth_dev_socket_id(port), &rx_conf_default,
+ rte_eth_dev_socket_id(port), rxconf,
mbuf_pool);
if (retval < 0)
return retval;
}
for (q = 0; q < tx_rings; q ++) {
retval = rte_eth_tx_queue_setup(port, q, tx_ring_size,
- rte_eth_dev_socket_id(port), &tx_conf_default);
+ rte_eth_dev_socket_id(port),
+ NULL);
if (retval < 0)
return retval;
}
/* Register the MAC address. */
ret = rte_eth_dev_mac_addr_add(ports[0], &dev->mac_address, (uint32_t)dev->device_fh);
- if (ret) {
+ if (ret) {
RTE_LOG(ERR, VHOST_DATA, "(%"PRIu64") Failed to add device MAC address to VMDQ\n",
dev->device_fh);
return -1;
struct ether_hdr *pkt_hdr;
uint64_t ret = 0;
- pkt_hdr = (struct ether_hdr *)m->data;
+ pkt_hdr = rte_pktmbuf_mtod(m, struct ether_hdr *);
/*get the used devices list*/
dev_ll = ll_root_used;
mbuf->pkt_len = mbuf->data_len;
/* Copy ethernet header to mbuf. */
- rte_memcpy((void*)mbuf->data, (const void*)m->data, ETH_HLEN);
+ rte_memcpy(rte_pktmbuf_mtod(mbuf, void*),
+ rte_pktmbuf_mtod(m, const void*), ETH_HLEN);
/* Setup vlan header. Bytes need to be re-ordered for network with htons()*/
- vlan_hdr = (struct vlan_ethhdr *) mbuf->data;
+ vlan_hdr = rte_pktmbuf_mtod(mbuf, struct vlan_ethhdr *);
vlan_hdr->h_vlan_encapsulated_proto = vlan_hdr->h_vlan_proto;
vlan_hdr->h_vlan_proto = htons(ETH_P_8021Q);
vlan_hdr->h_vlan_TCI = htons(vlan_tag);
/* Copy the remaining packet contents to the mbuf. */
- rte_memcpy((void*) ((uint8_t*)mbuf->data + VLAN_ETH_HLEN),
- (const void*) ((uint8_t*)m->data + ETH_HLEN), (m->data_len - ETH_HLEN));
+ rte_memcpy(rte_pktmbuf_mtod_offset(mbuf, void *, VLAN_ETH_HLEN),
+ rte_pktmbuf_mtod_offset(m, const void *, ETH_HLEN),
+ (m->data_len - ETH_HLEN));
tx_q->m_table[len] = mbuf;
len++;
if (enable_stats) {
/* Setup dummy mbuf. This is copied to a real mbuf if transmitted out the physical port. */
m.data_len = desc->len;
- m.data = (void*)(uintptr_t)buff_addr;
+ m.data_off = 0;
m.nb_segs = 1;
virtio_tx_route(dev, &m, mbuf_pool, 0);
* device is also registered here to handle the IOCTLs.
*/
int
-MAIN(int argc, char *argv[])
+main(int argc, char *argv[])
{
struct rte_mempool *mbuf_pool;
unsigned lcore_id, core_id = 0;
int ret;
uint8_t portid;
static pthread_t tid;
+ char thread_name[RTE_MAX_THREAD_NAME_LEN];
/* init EAL */
ret = rte_eal_init(argc, argv);
if (ret < 0)
rte_exit(EXIT_FAILURE, "Invalid argument\n");
- if (rte_eal_pci_probe() != 0)
- rte_exit(EXIT_FAILURE, "Error with NIC driver initialization\n");
-
for (lcore_id = 0; lcore_id < RTE_MAX_LCORE; lcore_id ++)
if (rte_lcore_is_enabled(lcore_id))
lcore_ids[core_id ++] = lcore_id;
nb_ports = RTE_MAX_ETHPORTS;
/*
- * Update the global var NUM_PORTS and global array PORTS
- * and get value of var VALID_NUM_PORTS according to system ports number
- */
+ * Update the global var NUM_PORTS and global array PORTS
+ * and get value of var VALID_NUM_PORTS according to system ports number
+ */
valid_num_ports = check_ports_num(nb_ports);
if ((valid_num_ports == 0) || (valid_num_ports > MAX_SUP_PORTS)) {
}
/* Create the mbuf pool. */
- mbuf_pool = rte_mempool_create("MBUF_POOL", NUM_MBUFS_PER_PORT * valid_num_ports,
- MBUF_SIZE, MBUF_CACHE_SIZE,
- sizeof(struct rte_pktmbuf_pool_private),
- rte_pktmbuf_pool_init, NULL,
- rte_pktmbuf_init, NULL,
- rte_socket_id(), 0);
+ mbuf_pool = rte_pktmbuf_pool_create("MBUF_POOL",
+ NUM_MBUFS_PER_PORT * valid_num_ports, MBUF_CACHE_SIZE, 0,
+ RTE_MBUF_DEFAULT_BUF_SIZE, rte_socket_id());
if (mbuf_pool == NULL)
rte_exit(EXIT_FAILURE, "Cannot create mbuf pool\n");
memset(&dev_statistics, 0, sizeof(dev_statistics));
/* Enable stats if the user option is set. */
- if (enable_stats)
- pthread_create(&tid, NULL, (void*)print_stats, NULL );
+ if (enable_stats) {
+ ret = pthread_create(&tid, NULL, (void *)print_stats, NULL);
+ if (ret != 0)
+ rte_exit(EXIT_FAILURE,
+ "Cannot create print-stats thread\n");
+
+ /* Set thread_name for aid in debugging. */
+ snprintf(thread_name, RTE_MAX_THREAD_NAME_LEN, "print-xen-stats");
+ ret = pthread_setname_np(tid, thread_name);
+ if (ret != 0)
+ RTE_LOG(ERR, VHOST_CONFIG,
+ "Cannot set print-stats name\n");
+ }
/* Launch all data cores. */
RTE_LCORE_FOREACH_SLAVE(lcore_id) {
git.droids-corp.org / dpdk.git / blobdiff