net/hns3: refactor queue info dump
[dpdk.git] / examples / vmdq / main.c
index 91f9a99..10410b8 100644 (file)
@@ -20,7 +20,6 @@
 #include <rte_memcpy.h>
 #include <rte_eal.h>
 #include <rte_launch.h>
-#include <rte_atomic.h>
 #include <rte_cycles.h>
 #include <rte_prefetch.h>
 #include <rte_lcore.h>
@@ -59,16 +58,19 @@ static uint32_t enabled_port_mask;
 /* number of pools (if user does not specify any, 8 by default */
 static uint32_t num_queues = 8;
 static uint32_t num_pools = 8;
+static uint8_t rss_enable;
 
-/* empty vmdq configuration structure. Filled in programatically */
+/* Default structure for VMDq. 8< */
+
+/* empty VMDq configuration structure. Filled in programmatically */
 static const struct rte_eth_conf vmdq_conf_default = {
        .rxmode = {
-               .mq_mode        = ETH_MQ_RX_VMDQ_ONLY,
+               .mq_mode        = RTE_ETH_MQ_RX_VMDQ_ONLY,
                .split_hdr_size = 0,
        },
 
        .txmode = {
-               .mq_mode = ETH_MQ_TX_NONE,
+               .mq_mode = RTE_ETH_MQ_TX_NONE,
        },
        .rx_adv_conf = {
                /*
@@ -76,7 +78,7 @@ static const struct rte_eth_conf vmdq_conf_default = {
                 * appropriate values
                 */
                .vmdq_rx_conf = {
-                       .nb_queue_pools = ETH_8_POOLS,
+                       .nb_queue_pools = RTE_ETH_8_POOLS,
                        .enable_default_pool = 0,
                        .default_pool = 0,
                        .nb_pool_maps = 0,
@@ -84,6 +86,7 @@ static const struct rte_eth_conf vmdq_conf_default = {
                },
        },
 };
+/* >8 End of Empty vdmq configuration structure. */
 
 static unsigned lcore_ids[RTE_MAX_LCORE];
 static uint16_t ports[RTE_MAX_ETHPORTS];
@@ -92,6 +95,7 @@ static unsigned num_ports; /**< The number of ports specified in command line */
 /* array used for printing out statistics */
 volatile unsigned long rxPackets[MAX_QUEUES] = {0};
 
+/* vlan_tags 8< */
 const uint16_t vlan_tags[] = {
        0,  1,  2,  3,  4,  5,  6,  7,
        8,  9, 10, 11,  12, 13, 14, 15,
@@ -102,13 +106,19 @@ const uint16_t vlan_tags[] = {
        48, 49, 50, 51, 52, 53, 54, 55,
        56, 57, 58, 59, 60, 61, 62, 63,
 };
+/* >8 End of vlan_tags. */
+
 const uint16_t num_vlans = RTE_DIM(vlan_tags);
 static uint16_t num_pf_queues,  num_vmdq_queues;
 static uint16_t vmdq_pool_base, vmdq_queue_base;
+
+/* Pool mac address template. 8< */
+
 /* pool mac addr template, pool mac addr is like: 52 54 00 12 port# pool# */
 static struct rte_ether_addr pool_addr_template = {
        .addr_bytes = {0x52, 0x54, 0x00, 0x12, 0x00, 0x00}
 };
+/* >8 End of mac addr template. */
 
 /* ethernet addresses of ports */
 static struct rte_ether_addr vmdq_ports_eth_addr[RTE_MAX_ETHPORTS];
@@ -124,6 +134,8 @@ static struct rte_ether_addr vmdq_ports_eth_addr[RTE_MAX_ETHPORTS];
  * given above, and determine the queue number and pool map number according to
  * valid pool number
  */
+
+ /* Building correct configuration for vdmq. 8< */
 static inline int
 get_eth_conf(struct rte_eth_conf *eth_conf, uint32_t num_pools)
 {
@@ -143,6 +155,13 @@ get_eth_conf(struct rte_eth_conf *eth_conf, uint32_t num_pools)
        (void)(rte_memcpy(eth_conf, &vmdq_conf_default, sizeof(*eth_conf)));
        (void)(rte_memcpy(&eth_conf->rx_adv_conf.vmdq_rx_conf, &conf,
                   sizeof(eth_conf->rx_adv_conf.vmdq_rx_conf)));
+       if (rss_enable) {
+               eth_conf->rxmode.mq_mode = RTE_ETH_MQ_RX_VMDQ_RSS;
+               eth_conf->rx_adv_conf.rss_conf.rss_hf = RTE_ETH_RSS_IP |
+                                                       RTE_ETH_RSS_UDP |
+                                                       RTE_ETH_RSS_TCP |
+                                                       RTE_ETH_RSS_SCTP;
+       }
        return 0;
 }
 
@@ -164,6 +183,7 @@ port_init(uint16_t port, struct rte_mempool *mbuf_pool)
        uint16_t q;
        uint16_t queues_per_pool;
        uint32_t max_nb_pools;
+       uint64_t rss_hf_tmp;
 
        /*
         * The max pool number from dev_info will be used to validate the pool
@@ -209,6 +229,17 @@ port_init(uint16_t port, struct rte_mempool *mbuf_pool)
        if (!rte_eth_dev_is_valid_port(port))
                return -1;
 
+       rss_hf_tmp = port_conf.rx_adv_conf.rss_conf.rss_hf;
+       port_conf.rx_adv_conf.rss_conf.rss_hf &=
+               dev_info.flow_type_rss_offloads;
+       if (port_conf.rx_adv_conf.rss_conf.rss_hf != rss_hf_tmp) {
+               printf("Port %u modified RSS hash function based on hardware support,"
+                       "requested:%#"PRIx64" configured:%#"PRIx64"\n",
+                       port,
+                       rss_hf_tmp,
+                       port_conf.rx_adv_conf.rss_conf.rss_hf);
+       }
+
        /*
         * Though in this example, we only receive packets from the first queue
         * of each pool and send packets through first rte_lcore_count() tx
@@ -227,9 +258,9 @@ port_init(uint16_t port, struct rte_mempool *mbuf_pool)
                return retval;
        }
 
-       if (dev_info.tx_offload_capa & DEV_TX_OFFLOAD_MBUF_FAST_FREE)
+       if (dev_info.tx_offload_capa & RTE_ETH_TX_OFFLOAD_MBUF_FAST_FREE)
                port_conf.txmode.offloads |=
-                       DEV_TX_OFFLOAD_MBUF_FAST_FREE;
+                       RTE_ETH_TX_OFFLOAD_MBUF_FAST_FREE;
        retval = rte_eth_dev_configure(port, rxRings, txRings, &port_conf);
        if (retval != 0)
                return retval;
@@ -276,16 +307,16 @@ port_init(uint16_t port, struct rte_mempool *mbuf_pool)
                return retval;
        }
 
-       rte_eth_macaddr_get(port, &vmdq_ports_eth_addr[port]);
+       retval = rte_eth_macaddr_get(port, &vmdq_ports_eth_addr[port]);
+       if (retval < 0) {
+               printf("port %d MAC address get failed: %s\n", port,
+                      rte_strerror(-retval));
+               return retval;
+       }
        printf("Port %u MAC: %02"PRIx8" %02"PRIx8" %02"PRIx8
                        " %02"PRIx8" %02"PRIx8" %02"PRIx8"\n",
                        (unsigned)port,
-                       vmdq_ports_eth_addr[port].addr_bytes[0],
-                       vmdq_ports_eth_addr[port].addr_bytes[1],
-                       vmdq_ports_eth_addr[port].addr_bytes[2],
-                       vmdq_ports_eth_addr[port].addr_bytes[3],
-                       vmdq_ports_eth_addr[port].addr_bytes[4],
-                       vmdq_ports_eth_addr[port].addr_bytes[5]);
+                       RTE_ETHER_ADDR_BYTES(&vmdq_ports_eth_addr[port]));
 
        /*
         * Set mac for each pool.
@@ -297,11 +328,8 @@ port_init(uint16_t port, struct rte_mempool *mbuf_pool)
                mac = pool_addr_template;
                mac.addr_bytes[4] = port;
                mac.addr_bytes[5] = q;
-               printf("Port %u vmdq pool %u set mac %02x:%02x:%02x:%02x:%02x:%02x\n",
-                       port, q,
-                       mac.addr_bytes[0], mac.addr_bytes[1],
-                       mac.addr_bytes[2], mac.addr_bytes[3],
-                       mac.addr_bytes[4], mac.addr_bytes[5]);
+               printf("Port %u vmdq pool %u set mac " RTE_ETHER_ADDR_PRT_FMT "\n",
+                       port, q, RTE_ETHER_ADDR_BYTES(&mac));
                retval = rte_eth_dev_mac_addr_add(port, &mac,
                                q + vmdq_pool_base);
                if (retval) {
@@ -312,6 +340,7 @@ port_init(uint16_t port, struct rte_mempool *mbuf_pool)
 
        return 0;
 }
+/* >8 End of get_eth_conf. */
 
 /* Check num_pools parameter and set it if OK*/
 static int
@@ -345,10 +374,7 @@ parse_portmask(const char *portmask)
        /* parse hexadecimal string */
        pm = strtoul(portmask, &end, 16);
        if ((portmask[0] == '\0') || (end == NULL) || (*end != '\0'))
-               return -1;
-
-       if (pm == 0)
-               return -1;
+               return 0;
 
        return pm;
 }
@@ -358,7 +384,8 @@ static void
 vmdq_usage(const char *prgname)
 {
        printf("%s [EAL options] -- -p PORTMASK]\n"
-       "  --nb-pools NP: number of pools\n",
+       "  --nb-pools NP: number of pools\n"
+       "  --enable-rss: enable RSS (disabled by default)\n",
               prgname);
 }
 
@@ -372,6 +399,7 @@ vmdq_parse_args(int argc, char **argv)
        const char *prgname = argv[0];
        static struct option long_option[] = {
                {"nb-pools", required_argument, NULL, 0},
+               {"enable-rss", 0, NULL, 0},
                {NULL, 0, 0, 0}
        };
 
@@ -389,11 +417,18 @@ vmdq_parse_args(int argc, char **argv)
                        }
                        break;
                case 0:
-                       if (vmdq_parse_num_pools(optarg) == -1) {
-                               printf("invalid number of pools\n");
-                               vmdq_usage(prgname);
-                               return -1;
+                       if (!strcmp(long_option[option_index].name,
+                           "nb-pools")) {
+                               if (vmdq_parse_num_pools(optarg) == -1) {
+                                       printf("invalid number of pools\n");
+                                       vmdq_usage(prgname);
+                                       return -1;
+                               }
                        }
+
+                       if (!strcmp(long_option[option_index].name,
+                           "enable-rss"))
+                               rss_enable = 1;
                        break;
 
                default:
@@ -425,21 +460,22 @@ update_mac_address(struct rte_mbuf *m, unsigned dst_port)
        eth = rte_pktmbuf_mtod(m, struct rte_ether_hdr *);
 
        /* 02:00:00:00:00:xx */
-       tmp = &eth->d_addr.addr_bytes[0];
+       tmp = &eth->dst_addr.addr_bytes[0];
        *((uint64_t *)tmp) = 0x000000000002 + ((uint64_t)dst_port << 40);
 
        /* src addr */
-       rte_ether_addr_copy(&vmdq_ports_eth_addr[dst_port], &eth->s_addr);
+       rte_ether_addr_copy(&vmdq_ports_eth_addr[dst_port], &eth->src_addr);
 }
 
 /* When we receive a HUP signal, print out our stats */
 static void
 sighup_handler(int signum)
 {
-       unsigned q;
-       for (q = 0; q < num_queues; q++) {
-               if (q % (num_queues/num_pools) == 0)
-                       printf("\nPool %u: ", q/(num_queues/num_pools));
+       unsigned int q = vmdq_queue_base;
+       for (; q < num_queues; q++) {
+               if ((q - vmdq_queue_base) % (num_vmdq_queues / num_pools) == 0)
+                       printf("\nPool %u: ", (q - vmdq_queue_base) /
+                              (num_vmdq_queues / num_pools));
                printf("%lu ", rxPackets[q]);
        }
        printf("\nFinished handling signal %d\n", signum);
@@ -450,7 +486,7 @@ sighup_handler(int signum)
  * and writing to OUTPUT_PORT
  */
 static int
-lcore_main(__attribute__((__unused__)) void *dummy)
+lcore_main(__rte_unused void *dummy)
 {
        const uint16_t lcore_id = (uint16_t)rte_lcore_id();
        const uint16_t num_cores = (uint16_t)rte_lcore_count();
@@ -498,7 +534,7 @@ lcore_main(__attribute__((__unused__)) void *dummy)
 
        for (;;) {
                struct rte_mbuf *buf[MAX_PKT_BURST];
-               const uint16_t buf_size = sizeof(buf) / sizeof(buf[0]);
+               const uint16_t buf_size = RTE_DIM(buf);
 
                for (p = 0; p < num_ports; p++) {
                        const uint8_t sport = ports[p];
@@ -621,11 +657,14 @@ main(int argc, char *argv[])
        }
 
        /* call lcore_main() on every lcore */
-       rte_eal_mp_remote_launch(lcore_main, NULL, CALL_MASTER);
-       RTE_LCORE_FOREACH_SLAVE(lcore_id) {
+       rte_eal_mp_remote_launch(lcore_main, NULL, CALL_MAIN);
+       RTE_LCORE_FOREACH_WORKER(lcore_id) {
                if (rte_eal_wait_lcore(lcore_id) < 0)
                        return -1;
        }
 
+       /* clean up the EAL */
+       rte_eal_cleanup();
+
        return 0;
 }