48, 49, 50, 51, 52, 53, 54, 55,
56, 57, 58, 59, 60, 61, 62, 63,
};
+const uint16_t num_vlans = RTE_DIM(vlan_tags);
+static uint16_t num_pf_queues, num_vmdq_queues;
+static uint16_t vmdq_pool_base, vmdq_queue_base;
+/* pool mac addr template, pool mac addr is like: 52 54 00 12 port# pool# */
+static struct ether_addr pool_addr_template = {
+ .addr_bytes = {0x52, 0x54, 0x00, 0x12, 0x00, 0x00}
+};
/* ethernet addresses of ports */
static struct ether_addr vmdq_ports_eth_addr[RTE_MAX_ETHPORTS];
unsigned i;
conf.nb_queue_pools = (enum rte_eth_nb_pools)num_pools;
+ conf.nb_pool_maps = num_pools;
conf.enable_default_pool = 0;
conf.default_pool = 0; /* set explicit value, even if not used */
- switch (num_pools) {
- /* For 10G NIC like 82599, 128 is valid for queue number */
- case MAX_POOL_NUM_10G:
- num_queues = MAX_QUEUE_NUM_10G;
- conf.nb_pool_maps = MAX_POOL_MAP_NUM_10G;
- break;
- /* For 1G NIC like i350, 82580 and 82576, 8 is valid for queue number */
- case MAX_POOL_NUM_1G:
- num_queues = MAX_QUEUE_NUM_1G;
- conf.nb_pool_maps = MAX_POOL_MAP_NUM_1G;
- break;
- default:
- return -1;
- }
for (i = 0; i < conf.nb_pool_maps; i++){
conf.pool_map[i].vlan_id = vlan_tags[ i ];
return 0;
}
-/*
- * Validate the pool number accrording to the max pool number gotten form dev_info
- * If the pool number is invalid, give the error message and return -1
- */
-static inline int
-validate_num_pools(uint32_t max_nb_pools)
-{
- if (num_pools > max_nb_pools) {
- printf("invalid number of pools\n");
- return -1;
- }
-
- switch (max_nb_pools) {
- /* For 10G NIC like 82599, 64 is valid for pool number */
- case MAX_POOL_NUM_10G:
- if (num_pools != MAX_POOL_NUM_10G) {
- printf("invalid number of pools\n");
- return -1;
- }
- break;
- /* For 1G NIC like i350, 82580 and 82576, 8 is valid for pool number */
- case MAX_POOL_NUM_1G:
- if (num_pools != MAX_POOL_NUM_1G) {
- printf("invalid number of pools\n");
- return -1;
- }
- break;
- default:
- return -1;
- }
-
- return 0;
-}
-
/*
* Initialises a given port using global settings and with the rx buffers
* coming from the mbuf_pool passed as parameter
struct rte_eth_dev_info dev_info;
struct rte_eth_rxconf *rxconf;
struct rte_eth_conf port_conf;
- uint16_t rxRings, txRings = (uint16_t)rte_lcore_count();
+ uint16_t rxRings, txRings;
const uint16_t rxRingSize = RTE_TEST_RX_DESC_DEFAULT, txRingSize = RTE_TEST_TX_DESC_DEFAULT;
int retval;
uint16_t q;
+ uint16_t queues_per_pool;
uint32_t max_nb_pools;
/* The max pool number from dev_info will be used to validate the pool number specified in cmd line */
rte_eth_dev_info_get (port, &dev_info);
max_nb_pools = (uint32_t)dev_info.max_vmdq_pools;
- retval = validate_num_pools(max_nb_pools);
- if (retval < 0)
- return retval;
-
- retval = get_eth_conf(&port_conf, num_pools);
+ /*
+ * We allow to process part of VMDQ pools specified by num_pools in
+ * command line.
+ */
+ if (num_pools > max_nb_pools) {
+ printf("num_pools %d >max_nb_pools %d\n",
+ num_pools, max_nb_pools);
+ return -1;
+ }
+ retval = get_eth_conf(&port_conf, max_nb_pools);
if (retval < 0)
return retval;
+ /*
+ * NIC queues are divided into pf queues and vmdq queues.
+ */
+ /* There is assumption here all ports have the same configuration! */
+ num_pf_queues = dev_info.max_rx_queues - dev_info.vmdq_queue_num;
+ queues_per_pool = dev_info.vmdq_queue_num / dev_info.max_vmdq_pools;
+ num_vmdq_queues = num_pools * queues_per_pool;
+ num_queues = num_pf_queues + num_vmdq_queues;
+ vmdq_queue_base = dev_info.vmdq_queue_base;
+ vmdq_pool_base = dev_info.vmdq_pool_base;
+
+ printf("pf queue num: %u, configured vmdq pool num: %u,"
+ " each vmdq pool has %u queues\n",
+ num_pf_queues, num_pools, queues_per_pool);
+ printf("vmdq queue base: %d pool base %d\n",
+ vmdq_queue_base, vmdq_pool_base);
if (port >= rte_eth_dev_count()) return -1;
- rxRings = (uint16_t)num_queues,
+ /*
+ * Though in this example, we only receive packets from the first queue
+ * of each pool and send packets through first rte_lcore_count() tx
+ * queues of vmdq queues, all queues including pf queues are setup.
+ * This is because VMDQ queues doesn't always start from zero, and the
+ * PMD layer doesn't support selectively initialising part of rx/tx
+ * queues.
+ */
+ rxRings = (uint16_t)dev_info.max_rx_queues;
+ txRings = (uint16_t)dev_info.max_tx_queues;
retval = rte_eth_dev_configure(port, rxRings, txRings, &port_conf);
if (retval != 0)
return retval;
rte_eth_dev_socket_id(port),
rxconf,
mbuf_pool);
- if (retval < 0)
+ if (retval < 0) {
+ printf("initialise rx queue %d failed\n", q);
return retval;
+ }
}
for (q = 0; q < txRings; q ++) {
retval = rte_eth_tx_queue_setup(port, q, txRingSize,
rte_eth_dev_socket_id(port),
NULL);
- if (retval < 0)
+ if (retval < 0) {
+ printf("initialise tx queue %d failed\n", q);
return retval;
+ }
}
retval = rte_eth_dev_start(port);
- if (retval < 0)
+ if (retval < 0) {
+ printf("port %d start failed\n", port);
return retval;
+ }
rte_eth_macaddr_get(port, &vmdq_ports_eth_addr[port]);
printf("Port %u MAC: %02"PRIx8" %02"PRIx8" %02"PRIx8
vmdq_ports_eth_addr[port].addr_bytes[4],
vmdq_ports_eth_addr[port].addr_bytes[5]);
+ /*
+ * Set mac for each pool.
+ * There is no default mac for the pools in i40.
+ * Removes this after i40e fixes this issue.
+ */
+ for (q = 0; q < num_pools; q++) {
+ struct ether_addr mac;
+ mac = pool_addr_template;
+ mac.addr_bytes[4] = port;
+ mac.addr_bytes[5] = q;
+ printf("Port %u vmdq pool %u set mac %02x:%02x:%02x:%02x:%02x:%02x\n",
+ port, q,
+ mac.addr_bytes[0], mac.addr_bytes[1],
+ mac.addr_bytes[2], mac.addr_bytes[3],
+ mac.addr_bytes[4], mac.addr_bytes[5]);
+ retval = rte_eth_dev_mac_addr_add(port, &mac,
+ q + vmdq_pool_base);
+ if (retval) {
+ printf("mac addr add failed at pool %d\n", q);
+ return retval;
+ }
+ }
+
return 0;
}
if ((q_arg[0] == '\0') || (end == NULL) || (*end != '\0'))
return -1;
+ if (num_pools > num_vlans) {
+ printf("num_pools %d > num_vlans %d\n", num_pools, num_vlans);
+ return -1;
+ }
+
num_pools = n;
return 0;
uint16_t core_id = 0;
uint16_t startQueue, endQueue;
uint16_t q, i, p;
- const uint16_t remainder = (uint16_t)(num_queues % num_cores);
+ const uint16_t remainder = (uint16_t)(num_vmdq_queues % num_cores);
for (i = 0; i < num_cores; i ++)
if (lcore_ids[i] == lcore_id) {
if (remainder != 0) {
if (core_id < remainder) {
- startQueue = (uint16_t)(core_id * (num_queues/num_cores + 1));
- endQueue = (uint16_t)(startQueue + (num_queues/num_cores) + 1);
+ startQueue = (uint16_t)(core_id *
+ (num_vmdq_queues / num_cores + 1));
+ endQueue = (uint16_t)(startQueue +
+ (num_vmdq_queues / num_cores) + 1);
} else {
- startQueue = (uint16_t)(core_id * (num_queues/num_cores) + remainder);
- endQueue = (uint16_t)(startQueue + (num_queues/num_cores));
+ startQueue = (uint16_t)(core_id *
+ (num_vmdq_queues / num_cores) +
+ remainder);
+ endQueue = (uint16_t)(startQueue +
+ (num_vmdq_queues / num_cores));
}
} else {
- startQueue = (uint16_t)(core_id * (num_queues/num_cores));
- endQueue = (uint16_t)(startQueue + (num_queues/num_cores));
+ startQueue = (uint16_t)(core_id *
+ (num_vmdq_queues / num_cores));
+ endQueue = (uint16_t)(startQueue +
+ (num_vmdq_queues / num_cores));
}
+ /* vmdq queue idx doesn't always start from zero.*/
+ startQueue += vmdq_queue_base;
+ endQueue += vmdq_queue_base;
printf("core %u(lcore %u) reading queues %i-%i\n", (unsigned)core_id,
(unsigned)lcore_id, startQueue, endQueue - 1);
update_mac_address(buf[i], dport);
const uint16_t txCount = rte_eth_tx_burst(dport,
- core_id, buf, rxCount);
+ vmdq_queue_base + core_id,
+ buf,
+ rxCount);
if (txCount != rxCount) {
for (i = txCount; i < rxCount; i++)
git.droids-corp.org / dpdk.git / blobdiff