-/*-
- * BSD LICENSE
- *
- * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of Intel Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2010-2014 Intel Corporation
*/
#include <stdint.h>
#include <rte_log.h>
#include <rte_memory.h>
#include <rte_memcpy.h>
-#include <rte_memzone.h>
-#include <rte_tailq.h>
#include <rte_eal.h>
-#include <rte_per_lcore.h>
#include <rte_launch.h>
#include <rte_atomic.h>
#include <rte_cycles.h>
#include <rte_per_lcore.h>
#include <rte_branch_prediction.h>
#include <rte_interrupts.h>
-#include <rte_pci.h>
#include <rte_random.h>
#include <rte_debug.h>
#include <rte_ether.h>
#include <rte_ethdev.h>
-#include <rte_ring.h>
-#include <rte_log.h>
#include <rte_mempool.h>
#include <rte_mbuf.h>
-#include <rte_memcpy.h>
-
-#include "main.h"
-#define MAX_QUEUES 128
+#define MAX_QUEUES 1024
/*
- * For 10 GbE, 128 queues require roughly
- * 128*512 (RX/TX_queue_nb * RX/TX_ring_descriptors_nb) per port.
+ * 1024 queues require to meet the needs of a large number of vmdq_pools.
+ * (RX/TX_queue_nb * RX/TX_ring_descriptors_nb) per port.
*/
-#define NUM_MBUFS_PER_PORT (128*512)
+#define NUM_MBUFS_PER_PORT (MAX_QUEUES * RTE_MAX(RTE_TEST_RX_DESC_DEFAULT, \
+ RTE_TEST_TX_DESC_DEFAULT))
#define MBUF_CACHE_SIZE 64
-#define MBUF_SIZE (2048 + sizeof(struct rte_mbuf) + RTE_PKTMBUF_HEADROOM)
#define MAX_PKT_BURST 32
/*
* Configurable number of RX/TX ring descriptors
*/
-#define RTE_TEST_RX_DESC_DEFAULT 128
-#define RTE_TEST_TX_DESC_DEFAULT 512
+#define RTE_TEST_RX_DESC_DEFAULT 1024
+#define RTE_TEST_TX_DESC_DEFAULT 1024
#define INVALID_PORT_ID 0xFF
/* mask of enabled ports */
-static uint32_t enabled_port_mask = 0;
+static uint32_t enabled_port_mask;
/* number of pools (if user does not specify any, 8 by default */
static uint32_t num_queues = 8;
.rxmode = {
.mq_mode = ETH_MQ_RX_VMDQ_ONLY,
.split_hdr_size = 0,
- .header_split = 0, /**< Header Split disabled */
- .hw_ip_checksum = 0, /**< IP checksum offload disabled */
- .hw_vlan_filter = 0, /**< VLAN filtering disabled */
- .jumbo_frame = 0, /**< Jumbo Frame Support disabled */
},
.txmode = {
};
static unsigned lcore_ids[RTE_MAX_LCORE];
-static uint8_t ports[RTE_MAX_ETHPORTS];
-static unsigned num_ports = 0; /**< The number of ports specified in command line */
+static uint16_t ports[RTE_MAX_ETHPORTS];
+static unsigned num_ports; /**< The number of ports specified in command line */
/* array used for printing out statistics */
-volatile unsigned long rxPackets[ MAX_QUEUES ] = {0};
+volatile unsigned long rxPackets[MAX_QUEUES] = {0};
const uint16_t vlan_tags[] = {
0, 1, 2, 3, 4, 5, 6, 7,
static uint16_t num_pf_queues, num_vmdq_queues;
static uint16_t vmdq_pool_base, vmdq_queue_base;
/* pool mac addr template, pool mac addr is like: 52 54 00 12 port# pool# */
-static struct ether_addr pool_addr_template = {
+static struct rte_ether_addr pool_addr_template = {
.addr_bytes = {0x52, 0x54, 0x00, 0x12, 0x00, 0x00}
};
/* ethernet addresses of ports */
-static struct ether_addr vmdq_ports_eth_addr[RTE_MAX_ETHPORTS];
+static struct rte_ether_addr vmdq_ports_eth_addr[RTE_MAX_ETHPORTS];
#define MAX_QUEUE_NUM_10G 128
#define MAX_QUEUE_NUM_1G 8
#define MAX_POOL_MAP_NUM_1G 32
#define MAX_POOL_NUM_10G 64
#define MAX_POOL_NUM_1G 8
-/* Builds up the correct configuration for vmdq based on the vlan tags array
- * given above, and determine the queue number and pool map number according to valid pool number */
+/*
+ * Builds up the correct configuration for vmdq based on the vlan tags array
+ * given above, and determine the queue number and pool map number according to
+ * valid pool number
+ */
static inline int
get_eth_conf(struct rte_eth_conf *eth_conf, uint32_t num_pools)
{
conf.enable_default_pool = 0;
conf.default_pool = 0; /* set explicit value, even if not used */
- for (i = 0; i < conf.nb_pool_maps; i++){
- conf.pool_map[i].vlan_id = vlan_tags[ i ];
+ for (i = 0; i < conf.nb_pool_maps; i++) {
+ conf.pool_map[i].vlan_id = vlan_tags[i];
conf.pool_map[i].pools = (1UL << (i % num_pools));
}
* coming from the mbuf_pool passed as parameter
*/
static inline int
-port_init(uint8_t port, struct rte_mempool *mbuf_pool)
+port_init(uint16_t port, struct rte_mempool *mbuf_pool)
{
struct rte_eth_dev_info dev_info;
struct rte_eth_rxconf *rxconf;
+ struct rte_eth_txconf *txconf;
struct rte_eth_conf port_conf;
uint16_t rxRings, txRings;
- const uint16_t rxRingSize = RTE_TEST_RX_DESC_DEFAULT, txRingSize = RTE_TEST_TX_DESC_DEFAULT;
+ uint16_t rxRingSize = RTE_TEST_RX_DESC_DEFAULT;
+ uint16_t txRingSize = RTE_TEST_TX_DESC_DEFAULT;
int retval;
uint16_t q;
uint16_t queues_per_pool;
uint32_t max_nb_pools;
- /* The max pool number from dev_info will be used to validate the pool number specified in cmd line */
- rte_eth_dev_info_get (port, &dev_info);
+ /*
+ * The max pool number from dev_info will be used to validate the pool
+ * number specified in cmd line
+ */
+ retval = rte_eth_dev_info_get(port, &dev_info);
+ if (retval != 0) {
+ printf("Error during getting device (port %u) info: %s\n",
+ port, strerror(-retval));
+ return retval;
+ }
+
max_nb_pools = (uint32_t)dev_info.max_vmdq_pools;
/*
* We allow to process part of VMDQ pools specified by num_pools in
num_pf_queues, num_pools, queues_per_pool);
printf("vmdq queue base: %d pool base %d\n",
vmdq_queue_base, vmdq_pool_base);
- if (port >= rte_eth_dev_count()) return -1;
+ if (!rte_eth_dev_is_valid_port(port))
+ return -1;
/*
* Though in this example, we only receive packets from the first queue
*/
rxRings = (uint16_t)dev_info.max_rx_queues;
txRings = (uint16_t)dev_info.max_tx_queues;
+
+ retval = rte_eth_dev_info_get(port, &dev_info);
+ if (retval != 0) {
+ printf("Error during getting device (port %u) info: %s\n",
+ port, strerror(-retval));
+ return retval;
+ }
+
+ if (dev_info.tx_offload_capa & DEV_TX_OFFLOAD_MBUF_FAST_FREE)
+ port_conf.txmode.offloads |=
+ DEV_TX_OFFLOAD_MBUF_FAST_FREE;
retval = rte_eth_dev_configure(port, rxRings, txRings, &port_conf);
if (retval != 0)
return retval;
- rte_eth_dev_info_get(port, &dev_info);
+ retval = rte_eth_dev_adjust_nb_rx_tx_desc(port, &rxRingSize,
+ &txRingSize);
+ if (retval != 0)
+ return retval;
+ if (RTE_MAX(rxRingSize, txRingSize) > RTE_MAX(RTE_TEST_RX_DESC_DEFAULT,
+ RTE_TEST_TX_DESC_DEFAULT)) {
+ printf("Mbuf pool has an insufficient size for port %u.\n",
+ port);
+ return -1;
+ }
+
rxconf = &dev_info.default_rxconf;
rxconf->rx_drop_en = 1;
- for (q = 0; q < rxRings; q ++) {
+ txconf = &dev_info.default_txconf;
+ txconf->offloads = port_conf.txmode.offloads;
+ for (q = 0; q < rxRings; q++) {
retval = rte_eth_rx_queue_setup(port, q, rxRingSize,
rte_eth_dev_socket_id(port),
rxconf,
}
}
- for (q = 0; q < txRings; q ++) {
+ for (q = 0; q < txRings; q++) {
retval = rte_eth_tx_queue_setup(port, q, txRingSize,
rte_eth_dev_socket_id(port),
- NULL);
+ txconf);
if (retval < 0) {
printf("initialise tx queue %d failed\n", q);
return retval;
return retval;
}
- rte_eth_macaddr_get(port, &vmdq_ports_eth_addr[port]);
+ retval = rte_eth_macaddr_get(port, &vmdq_ports_eth_addr[port]);
+ if (retval < 0) {
+ printf("port %d MAC address get failed: %s\n", port,
+ rte_strerror(-retval));
+ return retval;
+ }
printf("Port %u MAC: %02"PRIx8" %02"PRIx8" %02"PRIx8
" %02"PRIx8" %02"PRIx8" %02"PRIx8"\n",
(unsigned)port,
* Removes this after i40e fixes this issue.
*/
for (q = 0; q < num_pools; q++) {
- struct ether_addr mac;
+ struct rte_ether_addr mac;
mac = pool_addr_template;
mac.addr_bytes[4] = port;
mac.addr_bytes[5] = q;
};
/* Parse command line */
- while ((opt = getopt_long(argc, argv, "p:",long_option,&option_index)) != EOF) {
+ while ((opt = getopt_long(argc, argv, "p:", long_option,
+ &option_index)) != EOF) {
switch (opt) {
/* portmask */
case 'p':
}
break;
case 0:
- if (vmdq_parse_num_pools(optarg) == -1){
+ if (vmdq_parse_num_pools(optarg) == -1) {
printf("invalid number of pools\n");
vmdq_usage(prgname);
return -1;
}
}
- for(i = 0; i < RTE_MAX_ETHPORTS; i++) {
+ for (i = 0; i < RTE_MAX_ETHPORTS; i++) {
if (enabled_port_mask & (1 << i))
ports[num_ports++] = (uint8_t)i;
}
if (num_ports < 2 || num_ports % 2) {
printf("Current enabled port number is %u,"
- "but it should be even and at least 2\n",num_ports);
+ "but it should be even and at least 2\n", num_ports);
return -1;
}
static void
update_mac_address(struct rte_mbuf *m, unsigned dst_port)
{
- struct ether_hdr *eth;
+ struct rte_ether_hdr *eth;
void *tmp;
- eth = rte_pktmbuf_mtod(m, struct ether_hdr *);
+ eth = rte_pktmbuf_mtod(m, struct rte_ether_hdr *);
/* 02:00:00:00:00:xx */
tmp = ð->d_addr.addr_bytes[0];
*((uint64_t *)tmp) = 0x000000000002 + ((uint64_t)dst_port << 40);
/* src addr */
- ether_addr_copy(&vmdq_ports_eth_addr[dst_port], ð->s_addr);
+ rte_ether_addr_copy(&vmdq_ports_eth_addr[dst_port], ð->s_addr);
}
-#ifndef RTE_EXEC_ENV_BAREMETAL
/* When we receive a HUP signal, print out our stats */
static void
sighup_handler(int signum)
{
unsigned q;
- for (q = 0; q < num_queues; q ++) {
+ for (q = 0; q < num_queues; q++) {
if (q % (num_queues/num_pools) == 0)
printf("\nPool %u: ", q/(num_queues/num_pools));
- printf("%lu ", rxPackets[ q ]);
+ printf("%lu ", rxPackets[q]);
}
printf("\nFinished handling signal %d\n", signum);
}
-#endif
/*
* Main thread that does the work, reading from INPUT_PORT
* and writing to OUTPUT_PORT
*/
static int
-lcore_main(__attribute__((__unused__)) void* dummy)
+lcore_main(__rte_unused void *dummy)
{
const uint16_t lcore_id = (uint16_t)rte_lcore_id();
const uint16_t num_cores = (uint16_t)rte_lcore_count();
uint16_t q, i, p;
const uint16_t remainder = (uint16_t)(num_vmdq_queues % num_cores);
- for (i = 0; i < num_cores; i ++)
+ for (i = 0; i < num_cores; i++)
if (lcore_ids[i] == lcore_id) {
core_id = i;
break;
if (startQueue == endQueue) {
printf("lcore %u has nothing to do\n", lcore_id);
- return (0);
+ return 0;
}
for (;;) {
struct rte_mbuf *buf[MAX_PKT_BURST];
- const uint16_t buf_size = sizeof(buf) / sizeof(buf[0]);
+ const uint16_t buf_size = RTE_DIM(buf);
for (p = 0; p < num_ports; p++) {
const uint8_t sport = ports[p];
- const uint8_t dport = ports[p ^ 1]; /* 0 <-> 1, 2 <-> 3 etc */
-
+ /* 0 <-> 1, 2 <-> 3 etc */
+ const uint8_t dport = ports[p ^ 1];
if ((sport == INVALID_PORT_ID) || (dport == INVALID_PORT_ID))
continue;
num_ports = nb_ports;
}
- for (portid = 0; portid < num_ports; portid ++) {
- if (ports[portid] >= nb_ports) {
- printf("\nSpecified port ID(%u) exceeds max system port ID(%u)\n",
- ports[portid], (nb_ports - 1));
+ for (portid = 0; portid < num_ports; portid++) {
+ if (!rte_eth_dev_is_valid_port(ports[portid])) {
+ printf("\nSpecified port ID(%u) is not valid\n",
+ ports[portid]);
ports[portid] = INVALID_PORT_ID;
- valid_num_ports --;
+ valid_num_ports--;
}
}
return valid_num_ports;
/* Main function, does initialisation and calls the per-lcore functions */
int
-MAIN(int argc, char *argv[])
+main(int argc, char *argv[])
{
struct rte_mempool *mbuf_pool;
unsigned lcore_id, core_id = 0;
int ret;
unsigned nb_ports, valid_num_ports;
- uint8_t portid;
+ uint16_t portid;
-#ifndef RTE_EXEC_ENV_BAREMETAL
signal(SIGHUP, sighup_handler);
-#endif
/* init EAL */
ret = rte_eal_init(argc, argv);
if (ret < 0)
rte_exit(EXIT_FAILURE, "Invalid VMDQ argument\n");
- for (lcore_id = 0; lcore_id < RTE_MAX_LCORE; lcore_id ++)
+ for (lcore_id = 0; lcore_id < RTE_MAX_LCORE; lcore_id++)
if (rte_lcore_is_enabled(lcore_id))
- lcore_ids[core_id ++] = lcore_id;
+ lcore_ids[core_id++] = lcore_id;
if (rte_lcore_count() > RTE_MAX_LCORE)
- rte_exit(EXIT_FAILURE,"Not enough cores\n");
+ rte_exit(EXIT_FAILURE, "Not enough cores\n");
- nb_ports = rte_eth_dev_count();
- if (nb_ports > RTE_MAX_ETHPORTS)
- nb_ports = RTE_MAX_ETHPORTS;
+ nb_ports = rte_eth_dev_count_avail();
/*
* Update the global var NUM_PORTS and global array PORTS
rte_exit(EXIT_FAILURE, "Error with valid ports number is not even or less than 2\n");
}
- mbuf_pool = rte_mempool_create("MBUF_POOL", NUM_MBUFS_PER_PORT * nb_ports,
- MBUF_SIZE, MBUF_CACHE_SIZE,
- sizeof(struct rte_pktmbuf_pool_private),
- rte_pktmbuf_pool_init, NULL,
- rte_pktmbuf_init, NULL,
- rte_socket_id(), 0);
+ mbuf_pool = rte_pktmbuf_pool_create("MBUF_POOL",
+ NUM_MBUFS_PER_PORT * nb_ports, MBUF_CACHE_SIZE,
+ 0, RTE_MBUF_DEFAULT_BUF_SIZE, rte_socket_id());
if (mbuf_pool == NULL)
rte_exit(EXIT_FAILURE, "Cannot create mbuf pool\n");
/* initialize all ports */
- for (portid = 0; portid < nb_ports; portid++) {
+ RTE_ETH_FOREACH_DEV(portid) {
/* skip ports that are not enabled */
if ((enabled_port_mask & (1 << portid)) == 0) {
printf("\nSkipping disabled port %d\n", portid);