/*
* Configurable number of RX/TX ring descriptors
*/
-#define RTE_TEST_RX_DESC_DEFAULT 128
-#define RTE_TEST_TX_DESC_DEFAULT 512
+#define RTE_TEST_RX_DESC_DEFAULT 1024
+#define RTE_TEST_TX_DESC_DEFAULT 1024
#define INVALID_PORT_ID 0xFF
.rxmode = {
.mq_mode = ETH_MQ_RX_VMDQ_ONLY,
.split_hdr_size = 0,
- .header_split = 0, /**< Header Split disabled */
- .hw_ip_checksum = 0, /**< IP checksum offload disabled */
- .hw_vlan_filter = 0, /**< VLAN filtering disabled */
- .jumbo_frame = 0, /**< Jumbo Frame Support disabled */
},
.txmode = {
static uint16_t num_pf_queues, num_vmdq_queues;
static uint16_t vmdq_pool_base, vmdq_queue_base;
/* pool mac addr template, pool mac addr is like: 52 54 00 12 port# pool# */
-static struct ether_addr pool_addr_template = {
+static struct rte_ether_addr pool_addr_template = {
.addr_bytes = {0x52, 0x54, 0x00, 0x12, 0x00, 0x00}
};
/* ethernet addresses of ports */
-static struct ether_addr vmdq_ports_eth_addr[RTE_MAX_ETHPORTS];
+static struct rte_ether_addr vmdq_ports_eth_addr[RTE_MAX_ETHPORTS];
#define MAX_QUEUE_NUM_10G 128
#define MAX_QUEUE_NUM_1G 8
{
struct rte_eth_dev_info dev_info;
struct rte_eth_rxconf *rxconf;
+ struct rte_eth_txconf *txconf;
struct rte_eth_conf port_conf;
uint16_t rxRings, txRings;
uint16_t rxRingSize = RTE_TEST_RX_DESC_DEFAULT;
* The max pool number from dev_info will be used to validate the pool
* number specified in cmd line
*/
- rte_eth_dev_info_get(port, &dev_info);
+ retval = rte_eth_dev_info_get(port, &dev_info);
+ if (retval != 0) {
+ printf("Error during getting device (port %u) info: %s\n",
+ port, strerror(-retval));
+ return retval;
+ }
+
max_nb_pools = (uint32_t)dev_info.max_vmdq_pools;
/*
* We allow to process part of VMDQ pools specified by num_pools in
num_pf_queues, num_pools, queues_per_pool);
printf("vmdq queue base: %d pool base %d\n",
vmdq_queue_base, vmdq_pool_base);
- if (port >= rte_eth_dev_count())
+ if (!rte_eth_dev_is_valid_port(port))
return -1;
/*
*/
rxRings = (uint16_t)dev_info.max_rx_queues;
txRings = (uint16_t)dev_info.max_tx_queues;
+
+ retval = rte_eth_dev_info_get(port, &dev_info);
+ if (retval != 0) {
+ printf("Error during getting device (port %u) info: %s\n",
+ port, strerror(-retval));
+ return retval;
+ }
+
+ if (dev_info.tx_offload_capa & DEV_TX_OFFLOAD_MBUF_FAST_FREE)
+ port_conf.txmode.offloads |=
+ DEV_TX_OFFLOAD_MBUF_FAST_FREE;
retval = rte_eth_dev_configure(port, rxRings, txRings, &port_conf);
if (retval != 0)
return retval;
return -1;
}
- rte_eth_dev_info_get(port, &dev_info);
rxconf = &dev_info.default_rxconf;
rxconf->rx_drop_en = 1;
+ txconf = &dev_info.default_txconf;
+ txconf->offloads = port_conf.txmode.offloads;
for (q = 0; q < rxRings; q++) {
retval = rte_eth_rx_queue_setup(port, q, rxRingSize,
rte_eth_dev_socket_id(port),
for (q = 0; q < txRings; q++) {
retval = rte_eth_tx_queue_setup(port, q, txRingSize,
rte_eth_dev_socket_id(port),
- NULL);
+ txconf);
if (retval < 0) {
printf("initialise tx queue %d failed\n", q);
return retval;
return retval;
}
- rte_eth_macaddr_get(port, &vmdq_ports_eth_addr[port]);
+ retval = rte_eth_macaddr_get(port, &vmdq_ports_eth_addr[port]);
+ if (retval < 0) {
+ printf("port %d MAC address get failed: %s\n", port,
+ rte_strerror(-retval));
+ return retval;
+ }
printf("Port %u MAC: %02"PRIx8" %02"PRIx8" %02"PRIx8
" %02"PRIx8" %02"PRIx8" %02"PRIx8"\n",
(unsigned)port,
* Removes this after i40e fixes this issue.
*/
for (q = 0; q < num_pools; q++) {
- struct ether_addr mac;
+ struct rte_ether_addr mac;
mac = pool_addr_template;
mac.addr_bytes[4] = port;
mac.addr_bytes[5] = q;
static void
update_mac_address(struct rte_mbuf *m, unsigned dst_port)
{
- struct ether_hdr *eth;
+ struct rte_ether_hdr *eth;
void *tmp;
- eth = rte_pktmbuf_mtod(m, struct ether_hdr *);
+ eth = rte_pktmbuf_mtod(m, struct rte_ether_hdr *);
/* 02:00:00:00:00:xx */
tmp = ð->d_addr.addr_bytes[0];
*((uint64_t *)tmp) = 0x000000000002 + ((uint64_t)dst_port << 40);
/* src addr */
- ether_addr_copy(&vmdq_ports_eth_addr[dst_port], ð->s_addr);
+ rte_ether_addr_copy(&vmdq_ports_eth_addr[dst_port], ð->s_addr);
}
/* When we receive a HUP signal, print out our stats */
static void
sighup_handler(int signum)
{
- unsigned q;
- for (q = 0; q < num_queues; q++) {
- if (q % (num_queues/num_pools) == 0)
- printf("\nPool %u: ", q/(num_queues/num_pools));
+ unsigned int q = vmdq_queue_base;
+ for (; q < num_queues; q++) {
+ if ((q - vmdq_queue_base) % (num_vmdq_queues / num_pools) == 0)
+ printf("\nPool %u: ", (q - vmdq_queue_base) /
+ (num_vmdq_queues / num_pools));
printf("%lu ", rxPackets[q]);
}
printf("\nFinished handling signal %d\n", signum);
* and writing to OUTPUT_PORT
*/
static int
-lcore_main(__attribute__((__unused__)) void *dummy)
+lcore_main(__rte_unused void *dummy)
{
const uint16_t lcore_id = (uint16_t)rte_lcore_id();
const uint16_t num_cores = (uint16_t)rte_lcore_count();
for (;;) {
struct rte_mbuf *buf[MAX_PKT_BURST];
- const uint16_t buf_size = sizeof(buf) / sizeof(buf[0]);
+ const uint16_t buf_size = RTE_DIM(buf);
for (p = 0; p < num_ports; p++) {
const uint8_t sport = ports[p];
}
for (portid = 0; portid < num_ports; portid++) {
- if (ports[portid] >= nb_ports) {
- printf("\nSpecified port ID(%u) exceeds max system port ID(%u)\n",
- ports[portid], (nb_ports - 1));
+ if (!rte_eth_dev_is_valid_port(ports[portid])) {
+ printf("\nSpecified port ID(%u) is not valid\n",
+ ports[portid]);
ports[portid] = INVALID_PORT_ID;
valid_num_ports--;
}
if (rte_lcore_count() > RTE_MAX_LCORE)
rte_exit(EXIT_FAILURE, "Not enough cores\n");
- nb_ports = rte_eth_dev_count();
+ nb_ports = rte_eth_dev_count_avail();
/*
* Update the global var NUM_PORTS and global array PORTS
rte_exit(EXIT_FAILURE, "Cannot create mbuf pool\n");
/* initialize all ports */
- for (portid = 0; portid < nb_ports; portid++) {
+ RTE_ETH_FOREACH_DEV(portid) {
/* skip ports that are not enabled */
if ((enabled_port_mask & (1 << portid)) == 0) {
printf("\nSkipping disabled port %d\n", portid);