-/*-
- * BSD LICENSE
- *
- * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of Intel Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2010-2014 Intel Corporation
*/
#include <stdint.h>
#include <rte_log.h>
#include <rte_memory.h>
#include <rte_memcpy.h>
-#include <rte_memzone.h>
#include <rte_eal.h>
-#include <rte_per_lcore.h>
#include <rte_launch.h>
#include <rte_atomic.h>
#include <rte_cycles.h>
#include <rte_per_lcore.h>
#include <rte_branch_prediction.h>
#include <rte_interrupts.h>
-#include <rte_pci.h>
#include <rte_random.h>
#include <rte_debug.h>
#include <rte_ether.h>
#include <rte_ethdev.h>
-#include <rte_ring.h>
-#include <rte_log.h>
#include <rte_mempool.h>
#include <rte_mbuf.h>
-#include <rte_memcpy.h>
-#define MAX_QUEUES 128
+#define MAX_QUEUES 1024
/*
- * For 10 GbE, 128 queues require roughly
- * 128*512 (RX/TX_queue_nb * RX/TX_ring_descriptors_nb) per port.
+ * 1024 queues require to meet the needs of a large number of vmdq_pools.
+ * (RX/TX_queue_nb * RX/TX_ring_descriptors_nb) per port.
*/
-#define NUM_MBUFS_PER_PORT (128*512)
+#define NUM_MBUFS_PER_PORT (MAX_QUEUES * RTE_MAX(RTE_TEST_RX_DESC_DEFAULT, \
+ RTE_TEST_TX_DESC_DEFAULT))
#define MBUF_CACHE_SIZE 64
#define MAX_PKT_BURST 32
/*
* Configurable number of RX/TX ring descriptors
*/
-#define RTE_TEST_RX_DESC_DEFAULT 128
-#define RTE_TEST_TX_DESC_DEFAULT 512
+#define RTE_TEST_RX_DESC_DEFAULT 1024
+#define RTE_TEST_TX_DESC_DEFAULT 1024
#define INVALID_PORT_ID 0xFF
/* number of pools (if user does not specify any, 8 by default */
static uint32_t num_queues = 8;
static uint32_t num_pools = 8;
+static uint8_t rss_enable;
/* empty vmdq configuration structure. Filled in programatically */
static const struct rte_eth_conf vmdq_conf_default = {
.rxmode = {
.mq_mode = ETH_MQ_RX_VMDQ_ONLY,
.split_hdr_size = 0,
- .header_split = 0, /**< Header Split disabled */
- .hw_ip_checksum = 0, /**< IP checksum offload disabled */
- .hw_vlan_filter = 0, /**< VLAN filtering disabled */
- .jumbo_frame = 0, /**< Jumbo Frame Support disabled */
},
.txmode = {
};
static unsigned lcore_ids[RTE_MAX_LCORE];
-static uint8_t ports[RTE_MAX_ETHPORTS];
+static uint16_t ports[RTE_MAX_ETHPORTS];
static unsigned num_ports; /**< The number of ports specified in command line */
/* array used for printing out statistics */
static uint16_t num_pf_queues, num_vmdq_queues;
static uint16_t vmdq_pool_base, vmdq_queue_base;
/* pool mac addr template, pool mac addr is like: 52 54 00 12 port# pool# */
-static struct ether_addr pool_addr_template = {
+static struct rte_ether_addr pool_addr_template = {
.addr_bytes = {0x52, 0x54, 0x00, 0x12, 0x00, 0x00}
};
/* ethernet addresses of ports */
-static struct ether_addr vmdq_ports_eth_addr[RTE_MAX_ETHPORTS];
+static struct rte_ether_addr vmdq_ports_eth_addr[RTE_MAX_ETHPORTS];
#define MAX_QUEUE_NUM_10G 128
#define MAX_QUEUE_NUM_1G 8
(void)(rte_memcpy(eth_conf, &vmdq_conf_default, sizeof(*eth_conf)));
(void)(rte_memcpy(ð_conf->rx_adv_conf.vmdq_rx_conf, &conf,
sizeof(eth_conf->rx_adv_conf.vmdq_rx_conf)));
+ if (rss_enable) {
+ eth_conf->rxmode.mq_mode = ETH_MQ_RX_VMDQ_RSS;
+ eth_conf->rx_adv_conf.rss_conf.rss_hf = ETH_RSS_IP |
+ ETH_RSS_UDP |
+ ETH_RSS_TCP |
+ ETH_RSS_SCTP;
+ }
return 0;
}
* coming from the mbuf_pool passed as parameter
*/
static inline int
-port_init(uint8_t port, struct rte_mempool *mbuf_pool)
+port_init(uint16_t port, struct rte_mempool *mbuf_pool)
{
struct rte_eth_dev_info dev_info;
struct rte_eth_rxconf *rxconf;
+ struct rte_eth_txconf *txconf;
struct rte_eth_conf port_conf;
uint16_t rxRings, txRings;
- const uint16_t rxRingSize = RTE_TEST_RX_DESC_DEFAULT, txRingSize = RTE_TEST_TX_DESC_DEFAULT;
+ uint16_t rxRingSize = RTE_TEST_RX_DESC_DEFAULT;
+ uint16_t txRingSize = RTE_TEST_TX_DESC_DEFAULT;
int retval;
uint16_t q;
uint16_t queues_per_pool;
uint32_t max_nb_pools;
+ uint64_t rss_hf_tmp;
/*
* The max pool number from dev_info will be used to validate the pool
* number specified in cmd line
*/
- rte_eth_dev_info_get(port, &dev_info);
+ retval = rte_eth_dev_info_get(port, &dev_info);
+ if (retval != 0) {
+ printf("Error during getting device (port %u) info: %s\n",
+ port, strerror(-retval));
+ return retval;
+ }
+
max_nb_pools = (uint32_t)dev_info.max_vmdq_pools;
/*
* We allow to process part of VMDQ pools specified by num_pools in
num_pf_queues, num_pools, queues_per_pool);
printf("vmdq queue base: %d pool base %d\n",
vmdq_queue_base, vmdq_pool_base);
- if (port >= rte_eth_dev_count())
+ if (!rte_eth_dev_is_valid_port(port))
return -1;
+ rss_hf_tmp = port_conf.rx_adv_conf.rss_conf.rss_hf;
+ port_conf.rx_adv_conf.rss_conf.rss_hf &=
+ dev_info.flow_type_rss_offloads;
+ if (port_conf.rx_adv_conf.rss_conf.rss_hf != rss_hf_tmp) {
+ printf("Port %u modified RSS hash function based on hardware support,"
+ "requested:%#"PRIx64" configured:%#"PRIx64"\n",
+ port,
+ rss_hf_tmp,
+ port_conf.rx_adv_conf.rss_conf.rss_hf);
+ }
+
/*
* Though in this example, we only receive packets from the first queue
* of each pool and send packets through first rte_lcore_count() tx
*/
rxRings = (uint16_t)dev_info.max_rx_queues;
txRings = (uint16_t)dev_info.max_tx_queues;
+
+ retval = rte_eth_dev_info_get(port, &dev_info);
+ if (retval != 0) {
+ printf("Error during getting device (port %u) info: %s\n",
+ port, strerror(-retval));
+ return retval;
+ }
+
+ if (dev_info.tx_offload_capa & DEV_TX_OFFLOAD_MBUF_FAST_FREE)
+ port_conf.txmode.offloads |=
+ DEV_TX_OFFLOAD_MBUF_FAST_FREE;
retval = rte_eth_dev_configure(port, rxRings, txRings, &port_conf);
if (retval != 0)
return retval;
- rte_eth_dev_info_get(port, &dev_info);
+ retval = rte_eth_dev_adjust_nb_rx_tx_desc(port, &rxRingSize,
+ &txRingSize);
+ if (retval != 0)
+ return retval;
+ if (RTE_MAX(rxRingSize, txRingSize) > RTE_MAX(RTE_TEST_RX_DESC_DEFAULT,
+ RTE_TEST_TX_DESC_DEFAULT)) {
+ printf("Mbuf pool has an insufficient size for port %u.\n",
+ port);
+ return -1;
+ }
+
rxconf = &dev_info.default_rxconf;
rxconf->rx_drop_en = 1;
+ txconf = &dev_info.default_txconf;
+ txconf->offloads = port_conf.txmode.offloads;
for (q = 0; q < rxRings; q++) {
retval = rte_eth_rx_queue_setup(port, q, rxRingSize,
rte_eth_dev_socket_id(port),
for (q = 0; q < txRings; q++) {
retval = rte_eth_tx_queue_setup(port, q, txRingSize,
rte_eth_dev_socket_id(port),
- NULL);
+ txconf);
if (retval < 0) {
printf("initialise tx queue %d failed\n", q);
return retval;
return retval;
}
- rte_eth_macaddr_get(port, &vmdq_ports_eth_addr[port]);
+ retval = rte_eth_macaddr_get(port, &vmdq_ports_eth_addr[port]);
+ if (retval < 0) {
+ printf("port %d MAC address get failed: %s\n", port,
+ rte_strerror(-retval));
+ return retval;
+ }
printf("Port %u MAC: %02"PRIx8" %02"PRIx8" %02"PRIx8
" %02"PRIx8" %02"PRIx8" %02"PRIx8"\n",
(unsigned)port,
* Removes this after i40e fixes this issue.
*/
for (q = 0; q < num_pools; q++) {
- struct ether_addr mac;
+ struct rte_ether_addr mac;
mac = pool_addr_template;
mac.addr_bytes[4] = port;
mac.addr_bytes[5] = q;
vmdq_usage(const char *prgname)
{
printf("%s [EAL options] -- -p PORTMASK]\n"
- " --nb-pools NP: number of pools\n",
+ " --nb-pools NP: number of pools\n"
+ " --enable-rss: enable RSS (disabled by default)\n",
prgname);
}
const char *prgname = argv[0];
static struct option long_option[] = {
{"nb-pools", required_argument, NULL, 0},
+ {"enable-rss", 0, NULL, 0},
{NULL, 0, 0, 0}
};
}
break;
case 0:
- if (vmdq_parse_num_pools(optarg) == -1) {
- printf("invalid number of pools\n");
- vmdq_usage(prgname);
- return -1;
+ if (!strcmp(long_option[option_index].name,
+ "nb-pools")) {
+ if (vmdq_parse_num_pools(optarg) == -1) {
+ printf("invalid number of pools\n");
+ vmdq_usage(prgname);
+ return -1;
+ }
}
+
+ if (!strcmp(long_option[option_index].name,
+ "enable-rss"))
+ rss_enable = 1;
break;
default:
static void
update_mac_address(struct rte_mbuf *m, unsigned dst_port)
{
- struct ether_hdr *eth;
+ struct rte_ether_hdr *eth;
void *tmp;
- eth = rte_pktmbuf_mtod(m, struct ether_hdr *);
+ eth = rte_pktmbuf_mtod(m, struct rte_ether_hdr *);
/* 02:00:00:00:00:xx */
tmp = ð->d_addr.addr_bytes[0];
*((uint64_t *)tmp) = 0x000000000002 + ((uint64_t)dst_port << 40);
/* src addr */
- ether_addr_copy(&vmdq_ports_eth_addr[dst_port], ð->s_addr);
+ rte_ether_addr_copy(&vmdq_ports_eth_addr[dst_port], ð->s_addr);
}
/* When we receive a HUP signal, print out our stats */
static void
sighup_handler(int signum)
{
- unsigned q;
- for (q = 0; q < num_queues; q++) {
- if (q % (num_queues/num_pools) == 0)
- printf("\nPool %u: ", q/(num_queues/num_pools));
+ unsigned int q = vmdq_queue_base;
+ for (; q < num_queues; q++) {
+ if ((q - vmdq_queue_base) % (num_vmdq_queues / num_pools) == 0)
+ printf("\nPool %u: ", (q - vmdq_queue_base) /
+ (num_vmdq_queues / num_pools));
printf("%lu ", rxPackets[q]);
}
printf("\nFinished handling signal %d\n", signum);
* and writing to OUTPUT_PORT
*/
static int
-lcore_main(__attribute__((__unused__)) void *dummy)
+lcore_main(__rte_unused void *dummy)
{
const uint16_t lcore_id = (uint16_t)rte_lcore_id();
const uint16_t num_cores = (uint16_t)rte_lcore_count();
for (;;) {
struct rte_mbuf *buf[MAX_PKT_BURST];
- const uint16_t buf_size = sizeof(buf) / sizeof(buf[0]);
+ const uint16_t buf_size = RTE_DIM(buf);
for (p = 0; p < num_ports; p++) {
const uint8_t sport = ports[p];
}
for (portid = 0; portid < num_ports; portid++) {
- if (ports[portid] >= nb_ports) {
- printf("\nSpecified port ID(%u) exceeds max system port ID(%u)\n",
- ports[portid], (nb_ports - 1));
+ if (!rte_eth_dev_is_valid_port(ports[portid])) {
+ printf("\nSpecified port ID(%u) is not valid\n",
+ ports[portid]);
ports[portid] = INVALID_PORT_ID;
valid_num_ports--;
}
unsigned lcore_id, core_id = 0;
int ret;
unsigned nb_ports, valid_num_ports;
- uint8_t portid;
+ uint16_t portid;
signal(SIGHUP, sighup_handler);
if (rte_lcore_count() > RTE_MAX_LCORE)
rte_exit(EXIT_FAILURE, "Not enough cores\n");
- nb_ports = rte_eth_dev_count();
- if (nb_ports > RTE_MAX_ETHPORTS)
- nb_ports = RTE_MAX_ETHPORTS;
+ nb_ports = rte_eth_dev_count_avail();
/*
* Update the global var NUM_PORTS and global array PORTS
rte_exit(EXIT_FAILURE, "Cannot create mbuf pool\n");
/* initialize all ports */
- for (portid = 0; portid < nb_ports; portid++) {
+ RTE_ETH_FOREACH_DEV(portid) {
/* skip ports that are not enabled */
if ((enabled_port_mask & (1 << portid)) == 0) {
printf("\nSkipping disabled port %d\n", portid);