net/bnxt: fix packet type

[dpdk.git] / examples / vmdq_dcb / main.c

diff --git a/examples/vmdq_dcb/main.c b/examples/vmdq_dcb/main.c
index 4f6d47e..bfe72f8 100644 (file)
--- a/examples/vmdq_dcb/main.c
+++ b/examples/vmdq_dcb/main.c
@@ -1,34 +1,5 @@
-/*-
- *   BSD LICENSE
- *
- *   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
- *   All rights reserved.
- *
- *   Redistribution and use in source and binary forms, with or without
- *   modification, are permitted provided that the following conditions
- *   are met:
- *
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in
- *       the documentation and/or other materials provided with the
- *       distribution.
- *     * Neither the name of Intel Corporation nor the names of its
- *       contributors may be used to endorse or promote products derived
- *       from this software without specific prior written permission.
- *
- *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2010-2014 Intel Corporation
  */
 
 #include <stdint.h>
@@ -47,9 +18,7 @@
 #include <rte_log.h>
 #include <rte_memory.h>
 #include <rte_memcpy.h>
-#include <rte_memzone.h>
 #include <rte_eal.h>
-#include <rte_per_lcore.h>
 #include <rte_launch.h>
 #include <rte_atomic.h>
 #include <rte_cycles.h>
@@ -58,15 +27,12 @@
 #include <rte_per_lcore.h>
 #include <rte_branch_prediction.h>
 #include <rte_interrupts.h>
-#include <rte_pci.h>
 #include <rte_random.h>
 #include <rte_debug.h>
 #include <rte_ether.h>
 #include <rte_ethdev.h>
-#include <rte_log.h>
 #include <rte_mempool.h>
 #include <rte_mbuf.h>
-#include <rte_memcpy.h>
 
 /* basic constants used in application */
 #define MAX_QUEUES 1024
@@ -83,14 +49,14 @@
 /*
  * Configurable number of RX/TX ring descriptors
  */
-#define RTE_TEST_RX_DESC_DEFAULT 128
-#define RTE_TEST_TX_DESC_DEFAULT 512
+#define RTE_TEST_RX_DESC_DEFAULT 1024
+#define RTE_TEST_TX_DESC_DEFAULT 1024
 
 #define INVALID_PORT_ID 0xFF
 
 /* mask of enabled ports */
 static uint32_t enabled_port_mask;
-static uint8_t ports[RTE_MAX_ETHPORTS];
+static uint16_t ports[RTE_MAX_ETHPORTS];
 static unsigned num_ports;
 
 /* number of pools (if user does not specify any, 32 by default */
@@ -105,10 +71,7 @@ static const struct rte_eth_conf vmdq_dcb_conf_default = {
        .rxmode = {
                .mq_mode        = ETH_MQ_RX_VMDQ_DCB,
                .split_hdr_size = 0,
-               .header_split   = 0, /**< Header Split disabled */
-               .hw_ip_checksum = 0, /**< IP checksum offload disabled */
-               .hw_vlan_filter = 0, /**< VLAN filtering disabled */
-               .jumbo_frame    = 0, /**< Jumbo Frame Support disabled */
+               .ignore_offload_bitfield = 1,
        },
        .txmode = {
                .mq_mode = ETH_MQ_TX_VMDQ_DCB,
@@ -223,7 +186,7 @@ get_eth_conf(struct rte_eth_conf *eth_conf)
  * coming from the mbuf_pool passed as parameter
  */
 static inline int
-port_init(uint8_t port, struct rte_mempool *mbuf_pool)
+port_init(uint16_t port, struct rte_mempool *mbuf_pool)
 {
        struct rte_eth_dev_info dev_info;
        struct rte_eth_conf port_conf = {0};
@@ -233,6 +196,7 @@ port_init(uint8_t port, struct rte_mempool *mbuf_pool)
        uint16_t q;
        uint16_t queues_per_pool;
        uint32_t max_nb_pools;
+       struct rte_eth_txconf txq_conf;
 
        /*
         * The max pool number from dev_info will be used to validate the pool
@@ -289,6 +253,10 @@ port_init(uint8_t port, struct rte_mempool *mbuf_pool)
        if (retval < 0)
                return retval;
 
+       rte_eth_dev_info_get(port, &dev_info);
+       if (dev_info.tx_offload_capa & DEV_TX_OFFLOAD_MBUF_FAST_FREE)
+               port_conf.txmode.offloads |=
+                       DEV_TX_OFFLOAD_MBUF_FAST_FREE;
        /*
         * Though in this example, all queues including pf queues are setup.
         * This is because VMDQ queues doesn't always start from zero, and the
@@ -321,10 +289,13 @@ port_init(uint8_t port, struct rte_mempool *mbuf_pool)
                }
        }
 
+       txq_conf = dev_info.default_txconf;
+       txq_conf.txq_flags = ETH_TXQ_FLAGS_IGNORE;
+       txq_conf.offloads = port_conf.txmode.offloads;
        for (q = 0; q < num_queues; q++) {
                retval = rte_eth_tx_queue_setup(port, q, txRingSize,
                                        rte_eth_dev_socket_id(port),
-                                       NULL);
+                                       &txq_conf);
                if (retval < 0) {
                        printf("initialize tx queue %d failed\n", q);
                        return retval;
@@ -649,7 +620,7 @@ main(int argc, char *argv[])
        uintptr_t i;
        int ret;
        unsigned nb_ports, valid_num_ports;
-       uint8_t portid;
+       uint16_t portid;
 
        signal(SIGHUP, sighup_handler);