#include <rte_mbuf_dyn.h>
#include <rte_meter.h>
#include <rte_gtp.h>
+#include <rte_l2tpv2.h>
+#include <rte_ppp.h>
#ifdef __cplusplus
extern "C" {
* Note that support for more than a single group and priority level is not
* guaranteed.
*
- * Flow rules can apply to inbound and/or outbound traffic (ingress/egress).
+ * At vNIC / ethdev level, flow rules can apply to inbound and / or outbound
+ * traffic (ingress / egress), with respect to the vNIC / ethdev in question.
+ * At embedded switch level, flow rules apply to all traffic seen by it
+ * unless fitting meta items are used to set concrete traffic source(s).
*
* Several pattern items and actions are valid and can be used in both
* directions. Those valid for only one direction are described as such.
struct rte_flow_attr {
uint32_t group; /**< Priority group. */
uint32_t priority; /**< Rule priority level within group. */
- uint32_t ingress:1; /**< Rule applies to ingress traffic. */
- uint32_t egress:1; /**< Rule applies to egress traffic. */
+ /**
+ * The rule in question applies to ingress traffic (non-"transfer").
+ *
+ * @deprecated
+ * It has been possible to combine this attribute with "transfer".
+ * Doing so has been assumed to restrict the scope of matching
+ * to traffic going from within the embedded switch toward the
+ * ethdev the flow rule being created through. This behaviour
+ * is deprecated. During the transition period, one may still
+ * rely on it, but PMDs and applications are encouraged to
+ * gradually move away from this approach.
+ */
+ uint32_t ingress:1;
+ /**
+ * The rule in question applies to egress traffic (non-"transfer").
+ *
+ * @deprecated
+ * It has been possible to combine this attribute with "transfer".
+ * Doing so has been assumed to restrict the scope of matching
+ * to traffic sent by the application by virtue of the ethdev
+ * the flow rule being created through. This behaviour is now
+ * deprecated. During the transition period, one may still
+ * rely on it, but PMDs and applications are encouraged to
+ * gradually move away from this approach.
+ */
+ uint32_t egress:1;
/**
* Instead of simply matching the properties of traffic as it would
* appear on a given DPDK port ID, enabling this attribute transfers
* from or addressed to different physical ports, VFs or
* applications) at the device level.
*
- * It complements the behavior of some pattern items such as
- * RTE_FLOW_ITEM_TYPE_PHY_PORT and is meaningless without them.
+ * The application should match traffic originating from precise
+ * locations. See items PORT_REPRESENTOR and REPRESENTED_PORT.
*
- * When transferring flow rules, ingress and egress attributes keep
- * their original meaning, as if processing traffic emitted or
- * received by the application.
+ * Managing "transfer" flows requires that the user communicate them
+ * through a suitable port. @see rte_flow_pick_transfer_proxy().
*/
uint32_t transfer:1;
uint32_t reserved:29; /**< Reserved, must be zero. */
RTE_FLOW_ITEM_TYPE_ANY,
/**
+ * @deprecated
+ * @see RTE_FLOW_ITEM_TYPE_PORT_REPRESENTOR
+ * @see RTE_FLOW_ITEM_TYPE_REPRESENTED_PORT
+ *
* [META]
*
* Matches traffic originating from (ingress) or going to (egress)
RTE_FLOW_ITEM_TYPE_PF,
/**
+ * @deprecated
+ * @see RTE_FLOW_ITEM_TYPE_PORT_REPRESENTOR
+ * @see RTE_FLOW_ITEM_TYPE_REPRESENTED_PORT
+ *
* [META]
*
* Matches traffic originating from (ingress) or going to (egress) a
RTE_FLOW_ITEM_TYPE_VF,
/**
+ * @deprecated
+ * @see RTE_FLOW_ITEM_TYPE_PORT_REPRESENTOR
+ * @see RTE_FLOW_ITEM_TYPE_REPRESENTED_PORT
+ *
* [META]
*
* Matches traffic originating from (ingress) or going to (egress) a
RTE_FLOW_ITEM_TYPE_PHY_PORT,
/**
+ * @deprecated
+ * @see RTE_FLOW_ITEM_TYPE_PORT_REPRESENTOR
+ * @see RTE_FLOW_ITEM_TYPE_REPRESENTED_PORT
+ *
* [META]
*
* Matches traffic originating from (ingress) or going to (egress) a
* @see struct rte_flow_item_ethdev
*/
RTE_FLOW_ITEM_TYPE_REPRESENTED_PORT,
+
+ /**
+ * Matches a configured set of fields at runtime calculated offsets
+ * over the generic network header with variable length and
+ * flexible pattern
+ *
+ * @see struct rte_flow_item_flex.
+ */
+ RTE_FLOW_ITEM_TYPE_FLEX,
+
+ /**
+ * Matches L2TPv2 Header.
+ *
+ * See struct rte_flow_item_l2tpv2.
+ */
+ RTE_FLOW_ITEM_TYPE_L2TPV2,
+
+ /**
+ * Matches PPP Header.
+ *
+ * See struct rte_flow_item_ppp.
+ */
+ RTE_FLOW_ITEM_TYPE_PPP,
};
/**
#endif
/**
+ * @deprecated
+ * @see RTE_FLOW_ITEM_TYPE_PORT_REPRESENTOR
+ * @see RTE_FLOW_ITEM_TYPE_REPRESENTED_PORT
+ *
* RTE_FLOW_ITEM_TYPE_VF
*
* Matches traffic originating from (ingress) or going to (egress) a given
#endif
/**
+ * @deprecated
+ * @see RTE_FLOW_ITEM_TYPE_PORT_REPRESENTOR
+ * @see RTE_FLOW_ITEM_TYPE_REPRESENTED_PORT
+ *
* RTE_FLOW_ITEM_TYPE_PHY_PORT
*
* Matches traffic originating from (ingress) or going to (egress) a
#endif
/**
+ * @deprecated
+ * @see RTE_FLOW_ITEM_TYPE_PORT_REPRESENTOR
+ * @see RTE_FLOW_ITEM_TYPE_REPRESENTED_PORT
+ *
* RTE_FLOW_ITEM_TYPE_PORT_ID
*
* Matches traffic originating from (ingress) or going to (egress) a given
};
struct rte_vlan_hdr hdr;
};
+ /** Packet header contains at least one more VLAN, after this VLAN. */
uint32_t has_more_vlan:1;
- /**< Packet header contains at least one more VLAN, after this VLAN. */
uint32_t reserved:31; /**< Reserved, must be zero. */
};
*/
struct rte_flow_item_ipv6 {
struct rte_ipv6_hdr hdr; /**< IPv6 header definition. */
+ /** Header contains Hop-by-Hop Options extension header. */
uint32_t has_hop_ext:1;
- /**< Header contains Hop-by-Hop Options extension header. */
+ /** Header contains Routing extension header. */
uint32_t has_route_ext:1;
- /**< Header contains Routing extension header. */
+ /** Header contains Fragment extension header. */
uint32_t has_frag_ext:1;
- /**< Header contains Fragment extension header. */
+ /** Header contains Authentication extension header. */
uint32_t has_auth_ext:1;
- /**< Header contains Authentication extension header. */
+ /** Header contains Encapsulation Security Payload extension header. */
uint32_t has_esp_ext:1;
- /**< Header contains Encapsulation Security Payload extension header. */
+ /** Header contains Destination Options extension header. */
uint32_t has_dest_ext:1;
- /**< Header contains Destination Options extension header. */
+ /** Header contains Mobility extension header. */
uint32_t has_mobil_ext:1;
- /**< Header contains Mobility extension header. */
+ /** Header contains Host Identity Protocol extension header. */
uint32_t has_hip_ext:1;
- /**< Header contains Host Identity Protocol extension header. */
+ /** Header contains Shim6 Protocol extension header. */
uint32_t has_shim6_ext:1;
- /**< Header contains Shim6 Protocol extension header. */
+ /** Reserved for future extension headers, must be zero. */
uint32_t reserved:23;
- /**< Reserved for future extension headers, must be zero. */
};
/** Default mask for RTE_FLOW_ITEM_TYPE_IPV6. */
* RTE_FLOW_ITEM_TYPE_META
*
* Matches a specified metadata value. On egress, metadata can be set
- * either by mbuf dynamic metadata field with PKT_TX_DYNF_METADATA flag or
- * RTE_FLOW_ACTION_TYPE_SET_META. On ingress, RTE_FLOW_ACTION_TYPE_SET_META
+ * either by mbuf dynamic metadata field with RTE_MBUF_DYNFLAG_TX_METADATA flag
+ * or RTE_FLOW_ACTION_TYPE_SET_META. On ingress, RTE_FLOW_ACTION_TYPE_SET_META
* sets metadata for a packet and the metadata will be reported via mbuf
- * metadata dynamic field with PKT_RX_DYNF_METADATA flag. The dynamic mbuf
- * field must be registered in advance by rte_flow_dynf_metadata_register().
+ * metadata dynamic field with RTE_MBUF_DYNFLAG_RX_METADATA flag. The dynamic
+ * mbuf field must be registered in advance by
+ * rte_flow_dynf_metadata_register().
*/
struct rte_flow_item_meta {
uint32_t data;
};
#endif
+/**
+ * @warning
+ * @b EXPERIMENTAL: this structure may change without prior notice
+ *
+ * RTE_FLOW_ITEM_TYPE_L2TPV2
+ *
+ * Matches L2TPv2 Header
+ */
+struct rte_flow_item_l2tpv2 {
+ struct rte_l2tpv2_combined_msg_hdr hdr;
+};
+
+/** Default mask for RTE_FLOW_ITEM_TYPE_L2TPV2. */
+#ifndef __cplusplus
+static const struct rte_flow_item_l2tpv2 rte_flow_item_l2tpv2_mask = {
+ /*
+ * flags and version bit mask
+ * 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0
+ * T L x x S x O P x x x x V V V V
+ */
+ .hdr = {
+ .common = {
+ .flags_version = RTE_BE16(0xcb0f),
+ },
+ },
+};
+#endif
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this structure may change without prior notice
+ *
+ * RTE_FLOW_ITEM_TYPE_PPP
+ *
+ * Matches PPP Header
+ */
+struct rte_flow_item_ppp {
+ struct rte_ppp_hdr hdr;
+};
+
+/** Default mask for RTE_FLOW_ITEM_TYPE_PPP. */
+#ifndef __cplusplus
+static const struct rte_flow_item_ppp rte_flow_item_ppp_mask = {
+ .hdr = {
+ .addr = 0xff,
+ .ctrl = 0xff,
+ .proto_id = RTE_BE16(0xffff),
+ }
+};
+#endif
+
/**
* Matching pattern item definition.
*
const void *mask; /**< Bit-mask applied to spec and last. */
};
+/**
+ * @warning
+ * @b EXPERIMENTAL: this structure may change without prior notice
+ *
+ * RTE_FLOW_ITEM_TYPE_FLEX
+ *
+ * Matches a specified set of fields within the network protocol
+ * header. Each field is presented as set of bits with specified width, and
+ * bit offset from the header beginning.
+ *
+ * The pattern is concatenation of bit fields configured at item creation
+ * by rte_flow_flex_item_create(). At configuration the fields are presented
+ * by sample_data array.
+ *
+ * This type does not support ranges (struct rte_flow_item.last).
+ */
+struct rte_flow_item_flex {
+ struct rte_flow_item_flex_handle *handle; /**< Opaque item handle. */
+ uint32_t length; /**< Pattern length in bytes. */
+ const uint8_t *pattern; /**< Combined bitfields pattern to match. */
+};
+/**
+ * Field bit offset calculation mode.
+ */
+enum rte_flow_item_flex_field_mode {
+ /**
+ * Dummy field, used for byte boundary alignment in pattern.
+ * Pattern mask and data are ignored in the match. All configuration
+ * parameters besides field size are ignored.
+ */
+ FIELD_MODE_DUMMY = 0,
+ /**
+ * Fixed offset field. The bit offset from header beginning
+ * is permanent and defined by field_base parameter.
+ */
+ FIELD_MODE_FIXED,
+ /**
+ * The field bit offset is extracted from other header field (indirect
+ * offset field). The resulting field offset to match is calculated as:
+ *
+ * field_base + (*offset_base & offset_mask) << offset_shift
+ */
+ FIELD_MODE_OFFSET,
+ /**
+ * The field bit offset is extracted from other header field (indirect
+ * offset field), the latter is considered as bitmask containing some
+ * number of one bits, the resulting field offset to match is
+ * calculated as:
+ *
+ * field_base + bitcount(*offset_base & offset_mask) << offset_shift
+ */
+ FIELD_MODE_BITMASK,
+};
+
+/**
+ * Flex item field tunnel mode
+ */
+enum rte_flow_item_flex_tunnel_mode {
+ /**
+ * The protocol header can be present in the packet only once.
+ * No multiple flex item flow inclusions (for inner/outer) are allowed.
+ * No any relations with tunnel protocols are imposed. The drivers
+ * can optimize hardware resource usage to handle match on single flex
+ * item of specific type.
+ */
+ FLEX_TUNNEL_MODE_SINGLE = 0,
+ /**
+ * Flex item presents outer header only.
+ */
+ FLEX_TUNNEL_MODE_OUTER,
+ /**
+ * Flex item presents inner header only.
+ */
+ FLEX_TUNNEL_MODE_INNER,
+ /**
+ * Flex item presents either inner or outer header. The driver
+ * handles as many multiple inners as hardware supports.
+ */
+ FLEX_TUNNEL_MODE_MULTI,
+ /**
+ * Flex item presents tunnel protocol header.
+ */
+ FLEX_TUNNEL_MODE_TUNNEL,
+};
+
+/**
+ *
+ * @warning
+ * @b EXPERIMENTAL: this structure may change without prior notice
+ */
+__extension__
+struct rte_flow_item_flex_field {
+ /** Defines how match field offset is calculated over the packet. */
+ enum rte_flow_item_flex_field_mode field_mode;
+ uint32_t field_size; /**< Field size in bits. */
+ int32_t field_base; /**< Field offset in bits. */
+ uint32_t offset_base; /**< Indirect offset field offset in bits. */
+ uint32_t offset_mask; /**< Indirect offset field bit mask. */
+ int32_t offset_shift; /**< Indirect offset multiply factor. */
+ uint32_t field_id:16; /**< Device hint, for multiple items in flow. */
+ uint32_t reserved:16; /**< Reserved field. */
+};
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this structure may change without prior notice
+ */
+struct rte_flow_item_flex_link {
+ /**
+ * Preceding/following header. The item type must be always provided.
+ * For preceding one item must specify the header value/mask to match
+ * for the link be taken and start the flex item header parsing.
+ */
+ struct rte_flow_item item;
+ /**
+ * Next field value to match to continue with one of the configured
+ * next protocols.
+ */
+ uint32_t next;
+};
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this structure may change without prior notice
+ */
+struct rte_flow_item_flex_conf {
+ /**
+ * Specifies the flex item and tunnel relations and tells the PMD
+ * whether flex item can be used for inner, outer or both headers,
+ * or whether flex item presents the tunnel protocol itself.
+ */
+ enum rte_flow_item_flex_tunnel_mode tunnel;
+ /**
+ * The next header offset, it presents the network header size covered
+ * by the flex item and can be obtained with all supported offset
+ * calculating methods (fixed, dedicated field, bitmask, etc).
+ */
+ struct rte_flow_item_flex_field next_header;
+ /**
+ * Specifies the next protocol field to match with link next protocol
+ * values and continue packet parsing with matching link.
+ */
+ struct rte_flow_item_flex_field next_protocol;
+ /**
+ * The fields will be sampled and presented for explicit match
+ * with pattern in the rte_flow_flex_item. There can be multiple
+ * fields descriptors, the number should be specified by nb_samples.
+ */
+ struct rte_flow_item_flex_field *sample_data;
+ /** Number of field descriptors in the sample_data array. */
+ uint32_t nb_samples;
+ /**
+ * Input link defines the flex item relation with preceding
+ * header. It specified the preceding item type and provides pattern
+ * to match. The flex item will continue parsing and will provide the
+ * data to flow match in case if there is the match with one of input
+ * links.
+ */
+ struct rte_flow_item_flex_link *input_link;
+ /** Number of link descriptors in the input link array. */
+ uint32_t nb_inputs;
+ /**
+ * Output link defines the next protocol field value to match and
+ * the following protocol header to continue packet parsing. Also
+ * defines the tunnel-related behaviour.
+ */
+ struct rte_flow_item_flex_link *output_link;
+ /** Number of link descriptors in the output link array. */
+ uint32_t nb_outputs;
+};
+
/**
* Action types.
*
RTE_FLOW_ACTION_TYPE_JUMP,
/**
- * Attaches an integer value to packets and sets PKT_RX_FDIR and
- * PKT_RX_FDIR_ID mbuf flags.
+ * Attaches an integer value to packets and sets RTE_MBUF_F_RX_FDIR and
+ * RTE_MBUF_F_RX_FDIR_ID mbuf flags.
*
* See struct rte_flow_action_mark.
*
/**
* Flags packets. Similar to MARK without a specific value; only
- * sets the PKT_RX_FDIR mbuf flag.
+ * sets the RTE_MBUF_F_RX_FDIR mbuf flag.
*
* No associated configuration structure.
*
RTE_FLOW_ACTION_TYPE_RSS,
/**
+ * @deprecated
+ * @see RTE_FLOW_ACTION_TYPE_PORT_REPRESENTOR
+ * @see RTE_FLOW_ACTION_TYPE_REPRESENTED_PORT
+ *
* Directs matching traffic to the physical function (PF) of the
* current device.
*
RTE_FLOW_ACTION_TYPE_PF,
/**
+ * @deprecated
+ * @see RTE_FLOW_ACTION_TYPE_PORT_REPRESENTOR
+ * @see RTE_FLOW_ACTION_TYPE_REPRESENTED_PORT
+ *
* Directs matching traffic to a given virtual function of the
* current device.
*
RTE_FLOW_ACTION_TYPE_VF,
/**
+ * @deprecated
+ * @see RTE_FLOW_ACTION_TYPE_PORT_REPRESENTOR
+ * @see RTE_FLOW_ACTION_TYPE_REPRESENTED_PORT
+ *
* Directs packets to a given physical port index of the underlying
* device.
*
RTE_FLOW_ACTION_TYPE_PHY_PORT,
/**
+ * @deprecated
+ * @see RTE_FLOW_ACTION_TYPE_PORT_REPRESENTOR
+ * @see RTE_FLOW_ACTION_TYPE_REPRESENTED_PORT
+ *
* Directs matching traffic to a given DPDK port ID.
*
* See struct rte_flow_action_port_id.
RTE_FLOW_ACTION_TYPE_SECURITY,
/**
+ * @deprecated
+ * @see RTE_FLOW_ACTION_TYPE_MODIFY_FIELD
+ *
* Implements OFPAT_SET_MPLS_TTL ("MPLS TTL") as defined by the
* OpenFlow Switch Specification.
*
RTE_FLOW_ACTION_TYPE_OF_SET_MPLS_TTL,
/**
+ * @deprecated
+ * @see RTE_FLOW_ACTION_TYPE_MODIFY_FIELD
+ *
* Implements OFPAT_DEC_MPLS_TTL ("decrement MPLS TTL") as defined
* by the OpenFlow Switch Specification.
*
RTE_FLOW_ACTION_TYPE_OF_DEC_MPLS_TTL,
/**
+ * @deprecated
+ * @see RTE_FLOW_ACTION_TYPE_MODIFY_FIELD
+ *
* Implements OFPAT_SET_NW_TTL ("IP TTL") as defined by the OpenFlow
* Switch Specification.
*
RTE_FLOW_ACTION_TYPE_OF_SET_NW_TTL,
/**
+ * @warning This is a legacy action.
+ * @see RTE_FLOW_ACTION_TYPE_MODIFY_FIELD
+ *
* Implements OFPAT_DEC_NW_TTL ("decrement IP TTL") as defined by
* the OpenFlow Switch Specification.
*
RTE_FLOW_ACTION_TYPE_OF_DEC_NW_TTL,
/**
+ * @deprecated
+ * @see RTE_FLOW_ACTION_TYPE_MODIFY_FIELD
+ *
* Implements OFPAT_COPY_TTL_OUT ("copy TTL "outwards" -- from
* next-to-outermost to outermost") as defined by the OpenFlow
* Switch Specification.
RTE_FLOW_ACTION_TYPE_OF_COPY_TTL_OUT,
/**
+ * @deprecated
+ * @see RTE_FLOW_ACTION_TYPE_MODIFY_FIELD
+ *
* Implements OFPAT_COPY_TTL_IN ("copy TTL "inwards" -- from
* outermost to next-to-outermost") as defined by the OpenFlow
* Switch Specification.
RTE_FLOW_ACTION_TYPE_OF_PUSH_VLAN,
/**
- * Implements OFPAT_SET_VLAN_VID ("set the 802.1q VLAN id") as
+ * Implements OFPAT_SET_VLAN_VID ("set the 802.1q VLAN ID") as
* defined by the OpenFlow Switch Specification.
*
* See struct rte_flow_action_of_set_vlan_vid.
RTE_FLOW_ACTION_TYPE_RAW_DECAP,
/**
+ * @warning This is a legacy action.
+ * @see RTE_FLOW_ACTION_TYPE_MODIFY_FIELD
+ *
* Modify IPv4 source address in the outermost IPv4 header.
*
* If flow pattern does not define a valid RTE_FLOW_ITEM_TYPE_IPV4,
RTE_FLOW_ACTION_TYPE_SET_IPV4_SRC,
/**
+ * @warning This is a legacy action.
+ * @see RTE_FLOW_ACTION_TYPE_MODIFY_FIELD
+ *
* Modify IPv4 destination address in the outermost IPv4 header.
*
* If flow pattern does not define a valid RTE_FLOW_ITEM_TYPE_IPV4,
RTE_FLOW_ACTION_TYPE_SET_IPV4_DST,
/**
+ * @warning This is a legacy action.
+ * @see RTE_FLOW_ACTION_TYPE_MODIFY_FIELD
+ *
* Modify IPv6 source address in the outermost IPv6 header.
*
* If flow pattern does not define a valid RTE_FLOW_ITEM_TYPE_IPV6,
RTE_FLOW_ACTION_TYPE_SET_IPV6_SRC,
/**
+ * @warning This is a legacy action.
+ * @see RTE_FLOW_ACTION_TYPE_MODIFY_FIELD
+ *
* Modify IPv6 destination address in the outermost IPv6 header.
*
* If flow pattern does not define a valid RTE_FLOW_ITEM_TYPE_IPV6,
RTE_FLOW_ACTION_TYPE_SET_IPV6_DST,
/**
+ * @warning This is a legacy action.
+ * @see RTE_FLOW_ACTION_TYPE_MODIFY_FIELD
+ *
* Modify source port number in the outermost TCP/UDP header.
*
* If flow pattern does not define a valid RTE_FLOW_ITEM_TYPE_TCP
RTE_FLOW_ACTION_TYPE_SET_TP_SRC,
/**
+ * @warning This is a legacy action.
+ * @see RTE_FLOW_ACTION_TYPE_MODIFY_FIELD
+ *
* Modify destination port number in the outermost TCP/UDP header.
*
* If flow pattern does not define a valid RTE_FLOW_ITEM_TYPE_TCP
RTE_FLOW_ACTION_TYPE_MAC_SWAP,
/**
+ * @warning This is a legacy action.
+ * @see RTE_FLOW_ACTION_TYPE_MODIFY_FIELD
+ *
* Decrease TTL value directly
*
* No associated configuration structure.
RTE_FLOW_ACTION_TYPE_DEC_TTL,
/**
+ * @warning This is a legacy action.
+ * @see RTE_FLOW_ACTION_TYPE_MODIFY_FIELD
+ *
* Set TTL value
*
* See struct rte_flow_action_set_ttl
RTE_FLOW_ACTION_TYPE_SET_TTL,
/**
+ * @warning This is a legacy action.
+ * @see RTE_FLOW_ACTION_TYPE_MODIFY_FIELD
+ *
* Set source MAC address from matched flow.
*
* If flow pattern does not define a valid RTE_FLOW_ITEM_TYPE_ETH,
RTE_FLOW_ACTION_TYPE_SET_MAC_SRC,
/**
+ * @warning This is a legacy action.
+ * @see RTE_FLOW_ACTION_TYPE_MODIFY_FIELD
+ *
* Set destination MAC address from matched flow.
*
* If flow pattern does not define a valid RTE_FLOW_ITEM_TYPE_ETH,
RTE_FLOW_ACTION_TYPE_SET_MAC_DST,
/**
+ * @warning This is a legacy action.
+ * @see RTE_FLOW_ACTION_TYPE_MODIFY_FIELD
+ *
* Increase sequence number in the outermost TCP header.
*
* Action configuration specifies the value to increase
RTE_FLOW_ACTION_TYPE_INC_TCP_SEQ,
/**
+ * @warning This is a legacy action.
+ * @see RTE_FLOW_ACTION_TYPE_MODIFY_FIELD
+ *
* Decrease sequence number in the outermost TCP header.
*
* Action configuration specifies the value to decrease
RTE_FLOW_ACTION_TYPE_DEC_TCP_SEQ,
/**
+ * @warning This is a legacy action.
+ * @see RTE_FLOW_ACTION_TYPE_MODIFY_FIELD
+ *
* Increase acknowledgment number in the outermost TCP header.
*
* Action configuration specifies the value to increase
RTE_FLOW_ACTION_TYPE_INC_TCP_ACK,
/**
+ * @warning This is a legacy action.
+ * @see RTE_FLOW_ACTION_TYPE_MODIFY_FIELD
+ *
* Decrease acknowledgment number in the outermost TCP header.
*
* Action configuration specifies the value to decrease
RTE_FLOW_ACTION_TYPE_DEC_TCP_ACK,
/**
+ * @warning This is a legacy action.
+ * @see RTE_FLOW_ACTION_TYPE_MODIFY_FIELD
+ *
* Set Tag.
*
* Tag is for internal flow usage only and
RTE_FLOW_ACTION_TYPE_SET_TAG,
/**
+ * @warning This is a legacy action.
+ * @see RTE_FLOW_ACTION_TYPE_MODIFY_FIELD
+ *
* Set metadata on ingress or egress path.
*
* See struct rte_flow_action_set_meta.
RTE_FLOW_ACTION_TYPE_SET_META,
/**
+ * @warning This is a legacy action.
+ * @see RTE_FLOW_ACTION_TYPE_MODIFY_FIELD
+ *
* Modify IPv4 DSCP in the outermost IP header.
*
* If flow pattern does not define a valid RTE_FLOW_ITEM_TYPE_IPV4,
RTE_FLOW_ACTION_TYPE_SET_IPV4_DSCP,
/**
+ * @warning This is a legacy action.
+ * @see RTE_FLOW_ACTION_TYPE_MODIFY_FIELD
+ *
* Modify IPv6 DSCP in the outermost IP header.
*
* If flow pattern does not define a valid RTE_FLOW_ITEM_TYPE_IPV6,
* See struct rte_flow_action_meter_color.
*/
RTE_FLOW_ACTION_TYPE_METER_COLOR,
+
+ /**
+ * At embedded switch level, sends matching traffic to the given ethdev.
+ *
+ * @see struct rte_flow_action_ethdev
+ */
+ RTE_FLOW_ACTION_TYPE_PORT_REPRESENTOR,
+
+ /**
+ * At embedded switch level, send matching traffic to
+ * the entity represented by the given ethdev.
+ *
+ * @see struct rte_flow_action_ethdev
+ */
+ RTE_FLOW_ACTION_TYPE_REPRESENTED_PORT,
};
/**
* RTE_FLOW_ACTION_TYPE_MARK
*
- * Attaches an integer value to packets and sets PKT_RX_FDIR and
- * PKT_RX_FDIR_ID mbuf flags.
+ * Attaches an integer value to packets and sets RTE_MBUF_F_RX_FDIR and
+ * RTE_MBUF_F_RX_FDIR_ID mbuf flags.
*
* This value is arbitrary and application-defined. Maximum allowed value
* depends on the underlying implementation. It is returned in the
struct rte_flow_action_age {
uint32_t timeout:24; /**< Time in seconds. */
uint32_t reserved:8; /**< Reserved, must be zero. */
+ /** The user flow context, NULL means the rte_flow pointer. */
void *context;
- /**< The user flow context, NULL means the rte_flow pointer. */
};
/**
struct rte_flow_query_age {
uint32_t reserved:6; /**< Reserved, must be zero. */
uint32_t aged:1; /**< 1 if aging timeout expired, 0 otherwise. */
+ /** sec_since_last_hit value is valid. */
uint32_t sec_since_last_hit_valid:1;
- /**< sec_since_last_hit value is valid. */
uint32_t sec_since_last_hit:24; /**< Seconds since last traffic hit. */
};
* Adds a counter action to a matched flow.
*
* If more than one count action is specified in a single flow rule, then each
- * action must specify a unique id.
+ * action must specify a unique ID.
*
* Counters can be retrieved and reset through ``rte_flow_query()``, see
* ``struct rte_flow_query_count``.
*
- * For ports within the same switch domain then the counter id namespace extends
+ * For ports within the same switch domain then the counter ID namespace extends
* to all ports within that switch domain.
*/
struct rte_flow_action_count {
* through.
*/
uint32_t level;
- uint64_t types; /**< Specific RSS hash types (see ETH_RSS_*). */
+ uint64_t types; /**< Specific RSS hash types (see RTE_ETH_RSS_*). */
uint32_t key_len; /**< Hash key length in bytes. */
uint32_t queue_num; /**< Number of entries in @p queue. */
const uint8_t *key; /**< Hash key. */
};
/**
+ * @deprecated
+ * @see RTE_FLOW_ACTION_TYPE_PORT_REPRESENTOR
+ * @see RTE_FLOW_ACTION_TYPE_REPRESENTED_PORT
+ *
* RTE_FLOW_ACTION_TYPE_VF
*
* Directs matching traffic to a given virtual function of the current
};
/**
+ * @deprecated
+ * @see RTE_FLOW_ACTION_TYPE_PORT_REPRESENTOR
+ * @see RTE_FLOW_ACTION_TYPE_REPRESENTED_PORT
+ *
* RTE_FLOW_ACTION_TYPE_PHY_PORT
*
* Directs packets to a given physical port index of the underlying
};
/**
+ * @deprecated
+ * @see RTE_FLOW_ACTION_TYPE_PORT_REPRESENTOR
+ * @see RTE_FLOW_ACTION_TYPE_REPRESENTED_PORT
+ *
* RTE_FLOW_ACTION_TYPE_PORT_ID
*
* Directs matching traffic to a given DPDK port ID.
};
/**
+ * @deprecated
+ * @see RTE_FLOW_ACTION_TYPE_MODIFY_FIELD
+ *
* RTE_FLOW_ACTION_TYPE_OF_SET_MPLS_TTL
*
* Implements OFPAT_SET_MPLS_TTL ("MPLS TTL") as defined by the OpenFlow
};
/**
+ * @deprecated
+ * @see RTE_FLOW_ACTION_TYPE_MODIFY_FIELD
+ *
* RTE_FLOW_ACTION_TYPE_OF_SET_NW_TTL
*
* Implements OFPAT_SET_NW_TTL ("IP TTL") as defined by the OpenFlow Switch
/**
* RTE_FLOW_ACTION_TYPE_OF_SET_VLAN_VID
*
- * Implements OFPAT_SET_VLAN_VID ("set the 802.1q VLAN id") as defined by
+ * Implements OFPAT_SET_VLAN_VID ("set the 802.1q VLAN ID") as defined by
* the OpenFlow Switch Specification.
*/
struct rte_flow_action_of_set_vlan_vid {
- rte_be16_t vlan_vid; /**< VLAN id. */
+ rte_be16_t vlan_vid; /**< VLAN ID. */
};
/**
* RTE_FLOW_ACTION_TYPE_SET_META
*
* Set metadata. Metadata set by mbuf metadata dynamic field with
- * PKT_TX_DYNF_DATA flag on egress will be overridden by this action. On
- * ingress, the metadata will be carried by mbuf metadata dynamic field
- * with PKT_RX_DYNF_METADATA flag if set. The dynamic mbuf field must be
- * registered in advance by rte_flow_dynf_metadata_register().
+ * RTE_MBUF_DYNFLAG_TX_METADATA flag on egress will be overridden by this
+ * action. On ingress, the metadata will be carried by mbuf metadata dynamic
+ * field with RTE_MBUF_DYNFLAG_RX_METADATA flag if set. The dynamic mbuf field
+ * must be registered in advance by rte_flow_dynf_metadata_register().
*
* Altering partial bits is supported with mask. For bits which have never
* been set, unpredictable value will be seen depending on driver
uint32_t last_direction:1;
/** No TCP check will be done except the state change. */
uint32_t liberal_mode:1;
- /**<The current state of this connection. */
+ /** The current state of this connection. */
enum rte_flow_conntrack_state state;
/** Scaling factor for maximal allowed ACK window. */
uint8_t max_ack_window;
enum rte_color color; /**< Packet color. */
};
+/**
+ * @warning
+ * @b EXPERIMENTAL: this structure may change without prior notice
+ *
+ * Provides an ethdev port ID for use with the following actions:
+ * RTE_FLOW_ACTION_TYPE_PORT_REPRESENTOR,
+ * RTE_FLOW_ACTION_TYPE_REPRESENTED_PORT.
+ */
+struct rte_flow_action_ethdev {
+ uint16_t port_id; /**< ethdev port ID */
+};
+
/**
* Field IDs for MODIFY_FIELD action.
*/
};
/**
+ * @warning
+ * @b EXPERIMENTAL: this structure may change without prior notice
+ *
* Field description for MODIFY_FIELD action.
*/
struct rte_flow_action_modify_data {
RTE_STD_C11
union {
struct {
- /**< Encapsulation level or tag index. */
+ /** Encapsulation level or tag index. */
uint32_t level;
- /**< Number of bits to skip from a field. */
+ /** Number of bits to skip from a field. */
uint32_t offset;
};
/**
- * Immediate value for RTE_FLOW_FIELD_VALUE or
- * memory address for RTE_FLOW_FIELD_POINTER.
+ * Immediate value for RTE_FLOW_FIELD_VALUE, presented in the
+ * same byte order and length as in relevant rte_flow_item_xxx.
+ * The immediate source bitfield offset is inherited from
+ * the destination's one.
*/
- uint64_t value;
+ uint8_t value[16];
+ /**
+ * Memory address for RTE_FLOW_FIELD_POINTER, memory layout
+ * should be the same as for relevant field in the
+ * rte_flow_item_xxx structure.
+ */
+ void *pvalue;
};
};
* RTE_FLOW_ACTION_TYPE_MODIFY_FIELD
*
* Modify a destination header field according to the specified
- * operation. Another packet field can be used as a source as well
+ * operation. Another field of the packet can be used as a source as well
* as tag, mark, metadata, immediate value or a pointer to it.
*/
struct rte_flow_action_modify_field {
RTE_MBUF_DYNFIELD((m), rte_flow_dynf_metadata_offs, uint32_t *)
/* Mbuf dynamic flags for metadata. */
-#define PKT_RX_DYNF_METADATA (rte_flow_dynf_metadata_mask)
-#define PKT_TX_DYNF_METADATA (rte_flow_dynf_metadata_mask)
+#define RTE_MBUF_DYNFLAG_RX_METADATA (rte_flow_dynf_metadata_mask)
+#define PKT_RX_DYNF_METADATA RTE_DEPRECATED(PKT_RX_DYNF_METADATA) \
+ RTE_MBUF_DYNFLAG_RX_METADATA
+#define RTE_MBUF_DYNFLAG_TX_METADATA (rte_flow_dynf_metadata_mask)
+#define PKT_TX_DYNF_METADATA RTE_DEPRECATED(PKT_TX_DYNF_METADATA) \
+ RTE_MBUF_DYNFLAG_TX_METADATA
__rte_experimental
static inline uint32_t
*/
struct rte_flow_action_sample {
uint32_t ratio; /**< packets sampled equals to '1/ratio'. */
+ /** sub-action list specific for the sampling hit cases. */
const struct rte_flow_action *actions;
- /**< sub-action list specific for the sampling hit cases. */
};
/**
RTE_FLOW_ERROR_TYPE_ACTION_NUM, /**< Number of actions. */
RTE_FLOW_ERROR_TYPE_ACTION_CONF, /**< Action configuration. */
RTE_FLOW_ERROR_TYPE_ACTION, /**< Specific action. */
+ RTE_FLOW_ERROR_TYPE_STATE, /**< Current device state. */
};
/**
* Perform verbose error reporting if not NULL. PMDs initialize this
* structure in case of error only.
* @return
- * 0 on success, a nagative value otherwise.
+ * 0 on success, a negative value otherwise.
*/
__rte_experimental
int
*
* RTE_ETH_EVENT_FLOW_AGED event will be triggered when at least one new aged
* out flow was detected after the last call to rte_flow_get_aged_flows.
- * This function can be called to get the aged flows usynchronously from the
+ * This function can be called to get the aged flows asynchronously from the
* event callback or synchronously regardless the event.
* This is not safe to call rte_flow_get_aged_flows function with other flow
* functions from multiple threads simultaneously.
* Action should be valid at least for one flow direction,
* otherwise it is invalid for both ingress and egress rules.
*/
+ /** Action valid for rules applied to ingress traffic. */
uint32_t ingress:1;
- /**< Action valid for rules applied to ingress traffic. */
+ /** Action valid for rules applied to egress traffic. */
uint32_t egress:1;
- /**< Action valid for rules applied to egress traffic. */
/**
* When set to 1, indicates that the action is valid for
* transfer traffic; otherwise, for non-transfer traffic.
/**
* Indicate that the packet has a tunnel.
*/
-#define RTE_FLOW_RESTORE_INFO_TUNNEL (1ULL << 0)
+#define RTE_FLOW_RESTORE_INFO_TUNNEL RTE_BIT64(0)
/**
* Indicate that the packet has a non decapsulated tunnel header.
*/
-#define RTE_FLOW_RESTORE_INFO_ENCAPSULATED (1ULL << 1)
+#define RTE_FLOW_RESTORE_INFO_ENCAPSULATED RTE_BIT64(1)
/**
* Indicate that the packet has a group_id.
*/
-#define RTE_FLOW_RESTORE_INFO_GROUP_ID (1ULL << 2)
+#define RTE_FLOW_RESTORE_INFO_GROUP_ID RTE_BIT64(2)
/**
* Restore information structure to communicate the current packet processing
struct rte_flow_item *items,
uint32_t num_of_items,
struct rte_flow_error *error);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Get a proxy port to manage "transfer" flows.
+ *
+ * Managing "transfer" flows requires that the user communicate them
+ * via a port which has the privilege to control the embedded switch.
+ * For some vendors, all ports in a given switching domain have
+ * this privilege. For other vendors, it's only one port.
+ *
+ * This API indicates such a privileged port (a "proxy")
+ * for a given port in the same switching domain.
+ *
+ * @note
+ * If the PMD serving @p port_id doesn't have the corresponding method
+ * implemented, the API will return @p port_id via @p proxy_port_id.
+ *
+ * @param port_id
+ * Indicates the port to get a "proxy" for
+ * @param[out] proxy_port_id
+ * Indicates the "proxy" port
+ * @param[out] error
+ * If not NULL, allows the PMD to provide verbose report in case of error
+ *
+ * @return
+ * 0 on success, a negative error code otherwise
+ */
+__rte_experimental
+int
+rte_flow_pick_transfer_proxy(uint16_t port_id, uint16_t *proxy_port_id,
+ struct rte_flow_error *error);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Create the flex item with specified configuration over
+ * the Ethernet device.
+ *
+ * @param port_id
+ * Port identifier of Ethernet device.
+ * @param[in] conf
+ * Item configuration.
+ * @param[out] error
+ * Perform verbose error reporting if not NULL. PMDs initialize this
+ * structure in case of error only.
+ *
+ * @return
+ * Non-NULL opaque pointer on success, NULL otherwise and rte_errno is set.
+ */
+__rte_experimental
+struct rte_flow_item_flex_handle *
+rte_flow_flex_item_create(uint16_t port_id,
+ const struct rte_flow_item_flex_conf *conf,
+ struct rte_flow_error *error);
+
+/**
+ * Release the flex item on the specified Ethernet device.
+ *
+ * @param port_id
+ * Port identifier of Ethernet device.
+ * @param[in] handle
+ * Handle of the item existing on the specified device.
+ * @param[out] error
+ * Perform verbose error reporting if not NULL. PMDs initialize this
+ * structure in case of error only.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+__rte_experimental
+int
+rte_flow_flex_item_release(uint16_t port_id,
+ const struct rte_flow_item_flex_handle *handle,
+ struct rte_flow_error *error);
+
#ifdef __cplusplus
}
#endif