#include <rte_common.h>
+#include "rte_comp.h"
+
+/**
+ * Parameter log base 2 range description.
+ * Final value will be 2^value.
+ */
+struct rte_param_log2_range {
+ uint8_t min; /**< Minimum log2 value */
+ uint8_t max; /**< Maximum log2 value */
+ uint8_t increment;
+ /**< If a range of sizes are supported,
+ * this parameter is used to indicate
+ * increments in base 2 log byte value
+ * that are supported between the minimum and maximum
+ */
+};
+
+/** Structure used to capture a capability of a comp device */
+struct rte_compressdev_capabilities {
+ enum rte_comp_algorithm algo;
+ /* Compression algorithm */
+ uint64_t comp_feature_flags;
+ /**< Bitmask of flags for compression service features */
+ struct rte_param_log2_range window_size;
+ /**< Window size range in base two log byte values */
+};
+
+/** Macro used at end of comp PMD list */
+#define RTE_COMP_END_OF_CAPABILITIES_LIST() \
+ { RTE_COMP_ALGO_UNSPECIFIED }
+
+__rte_experimental
+const struct rte_compressdev_capabilities *
+rte_compressdev_capability_get(uint8_t dev_id,
+ enum rte_comp_algorithm algo);
+
+/**
+ * compression device supported feature flags
+ *
+ * @note New features flags should be added to the end of the list
+ *
+ * Keep these flags synchronised with rte_compressdev_get_feature_name()
+ */
+#define RTE_COMPDEV_FF_HW_ACCELERATED (1ULL << 0)
+/**< Operations are off-loaded to an external hardware accelerator */
+#define RTE_COMPDEV_FF_CPU_SSE (1ULL << 1)
+/**< Utilises CPU SIMD SSE instructions */
+#define RTE_COMPDEV_FF_CPU_AVX (1ULL << 2)
+/**< Utilises CPU SIMD AVX instructions */
+#define RTE_COMPDEV_FF_CPU_AVX2 (1ULL << 3)
+/**< Utilises CPU SIMD AVX2 instructions */
+#define RTE_COMPDEV_FF_CPU_AVX512 (1ULL << 4)
+/**< Utilises CPU SIMD AVX512 instructions */
+#define RTE_COMPDEV_FF_CPU_NEON (1ULL << 5)
+/**< Utilises CPU NEON instructions */
+#define RTE_COMPDEV_FF_OP_DONE_IN_DEQUEUE (1ULL << 6)
+/**< A PMD should set this if the bulk of the
+ * processing is done during the dequeue. It should leave it
+ * cleared if the processing is done during the enqueue (default).
+ * Applications can use this as a hint for tuning.
+ */
+
+/**
+ * Get the name of a compress device feature flag.
+ *
+ * @param flag
+ * The mask describing the flag
+ *
+ * @return
+ * The name of this flag, or NULL if it's not a valid feature flag.
+ */
+__rte_experimental
+const char *
+rte_compressdev_get_feature_name(uint64_t flag);
+
/** comp device information */
struct rte_compressdev_info {
const char *driver_name; /**< Driver name. */
+ uint64_t feature_flags; /**< Feature flags */
+ const struct rte_compressdev_capabilities *capabilities;
+ /**< Array of devices supported capabilities */
+ uint16_t max_nb_queue_pairs;
+ /**< Maximum number of queues pairs supported by device.
+ * (If 0, there is no limit in maximum number of queue pairs)
+ */
};
+/** comp device statistics */
+struct rte_compressdev_stats {
+ uint64_t enqueued_count;
+ /**< Count of all operations enqueued */
+ uint64_t dequeued_count;
+ /**< Count of all operations dequeued */
+
+ uint64_t enqueue_err_count;
+ /**< Total error count on operations enqueued */
+ uint64_t dequeue_err_count;
+ /**< Total error count on operations dequeued */
+};
+
+
+/**
+ * Get the device identifier for the named compress device.
+ *
+ * @param name
+ * Device name to select the device structure
+ * @return
+ * - Returns compress device identifier on success.
+ * - Return -1 on failure to find named compress device.
+ */
+__rte_experimental
+int
+rte_compressdev_get_dev_id(const char *name);
+
/**
* Get the compress device name given a device identifier.
*
* - Returns compress device name.
* - Returns NULL if compress device is not present.
*/
-const char * __rte_experimental
+__rte_experimental
+const char *
rte_compressdev_name_get(uint8_t dev_id);
/**
* @return
* - The total number of usable compress devices.
*/
-uint8_t __rte_experimental
+__rte_experimental
+uint8_t
rte_compressdev_count(void);
/**
* @return
* Returns number of attached compress devices.
*/
-uint8_t __rte_experimental
+__rte_experimental
+uint8_t
rte_compressdev_devices_get(const char *driver_name, uint8_t *devices,
uint8_t nb_devices);
* a default of zero if the socket could not be determined.
* -1 if returned is the dev_id value is out of range.
*/
-int __rte_experimental
+__rte_experimental
+int
rte_compressdev_socket_id(uint8_t dev_id);
/** Compress device configuration structure */
struct rte_compressdev_config {
int socket_id;
+ /**< Socket on which to allocate resources */
+ uint16_t nb_queue_pairs;
+ /**< Total number of queue pairs to configure on a device */
+ uint16_t max_nb_priv_xforms;
+ /**< Max number of private_xforms which will be created on the device */
+ uint16_t max_nb_streams;
+ /**< Max number of streams which will be created on the device */
};
/**
* - 0: Success, device configured.
* - <0: Error code returned by the driver configuration function.
*/
-int __rte_experimental
+__rte_experimental
+int
rte_compressdev_configure(uint8_t dev_id,
struct rte_compressdev_config *config);
* - 0: Success, device started.
* - <0: Error code of the driver device start function.
*/
-int __rte_experimental
+__rte_experimental
+int
rte_compressdev_start(uint8_t dev_id);
/**
* @param dev_id
* Compress device identifier
*/
-void __rte_experimental
+__rte_experimental
+void
rte_compressdev_stop(uint8_t dev_id);
/**
* - 0 on successfully closing device
* - <0 on failure to close device
*/
-int __rte_experimental
+__rte_experimental
+int
rte_compressdev_close(uint8_t dev_id);
+/**
+ * Allocate and set up a receive queue pair for a device.
+ * This should only be called when the device is stopped.
+ *
+ *
+ * @param dev_id
+ * Compress device identifier
+ * @param queue_pair_id
+ * The index of the queue pairs to set up. The
+ * value must be in the range [0, nb_queue_pair - 1]
+ * previously supplied to rte_compressdev_configure()
+ * @param max_inflight_ops
+ * Max number of ops which the qp will have to
+ * accommodate simultaneously
+ * @param socket_id
+ * The *socket_id* argument is the socket identifier
+ * in case of NUMA. The value can be *SOCKET_ID_ANY*
+ * if there is no NUMA constraint for the DMA memory
+ * allocated for the receive queue pair
+ * @return
+ * - 0: Success, queue pair correctly set up.
+ * - <0: Queue pair configuration failed
+ */
+__rte_experimental
+int
+rte_compressdev_queue_pair_setup(uint8_t dev_id, uint16_t queue_pair_id,
+ uint32_t max_inflight_ops, int socket_id);
+
+/**
+ * Get the number of queue pairs on a specific comp device
+ *
+ * @param dev_id
+ * Compress device identifier
+ * @return
+ * - The number of configured queue pairs.
+ */
+__rte_experimental
+uint16_t
+rte_compressdev_queue_pair_count(uint8_t dev_id);
+
+
+/**
+ * Retrieve the general I/O statistics of a device.
+ *
+ * @param dev_id
+ * The identifier of the device
+ * @param stats
+ * A pointer to a structure of type
+ * *rte_compressdev_stats* to be filled with the
+ * values of device counters
+ * @return
+ * - Zero if successful.
+ * - Non-zero otherwise.
+ */
+__rte_experimental
+int
+rte_compressdev_stats_get(uint8_t dev_id, struct rte_compressdev_stats *stats);
+
+/**
+ * Reset the general I/O statistics of a device.
+ *
+ * @param dev_id
+ * The identifier of the device.
+ */
+__rte_experimental
+void
+rte_compressdev_stats_reset(uint8_t dev_id);
+
/**
* Retrieve the contextual information of a device.
*
* The element after the last valid element has it's op field set to
* RTE_COMP_ALGO_LIST_END.
*/
-void __rte_experimental
+__rte_experimental
+void
rte_compressdev_info_get(uint8_t dev_id, struct rte_compressdev_info *dev_info);
+/**
+ *
+ * Dequeue a burst of processed compression operations from a queue on the comp
+ * device. The dequeued operation are stored in *rte_comp_op* structures
+ * whose pointers are supplied in the *ops* array.
+ *
+ * The rte_compressdev_dequeue_burst() function returns the number of ops
+ * actually dequeued, which is the number of *rte_comp_op* data structures
+ * effectively supplied into the *ops* array.
+ *
+ * A return value equal to *nb_ops* indicates that the queue contained
+ * at least *nb_ops* operations, and this is likely to signify that other
+ * processed operations remain in the devices output queue. Applications
+ * implementing a "retrieve as many processed operations as possible" policy
+ * can check this specific case and keep invoking the
+ * rte_compressdev_dequeue_burst() function until a value less than
+ * *nb_ops* is returned.
+ *
+ * The rte_compressdev_dequeue_burst() function does not provide any error
+ * notification to avoid the corresponding overhead.
+ *
+ * @note: operation ordering is not maintained within the queue pair.
+ *
+ * @note: In case op status = OUT_OF_SPACE_TERMINATED, op.consumed=0 and the
+ * op must be resubmitted with the same input data and a larger output buffer.
+ * op.produced is usually 0, but in decompression cases a PMD may return > 0
+ * and the application may find it useful to inspect that data.
+ * This status is only returned on STATELESS ops.
+ *
+ * @note: In case op status = OUT_OF_SPACE_RECOVERABLE, op.produced can be used
+ * and next op in stream should continue on from op.consumed+1 with a fresh
+ * output buffer.
+ * Consumed=0, produced=0 is an unusual but allowed case. There may be useful
+ * state/history stored in the PMD, even though no output was produced yet.
+ *
+ *
+ * @param dev_id
+ * Compress device identifier
+ * @param qp_id
+ * The index of the queue pair from which to retrieve
+ * processed operations. The value must be in the range
+ * [0, nb_queue_pair - 1] previously supplied to
+ * rte_compressdev_configure()
+ * @param ops
+ * The address of an array of pointers to
+ * *rte_comp_op* structures that must be
+ * large enough to store *nb_ops* pointers in it
+ * @param nb_ops
+ * The maximum number of operations to dequeue
+ * @return
+ * - The number of operations actually dequeued, which is the number
+ * of pointers to *rte_comp_op* structures effectively supplied to the
+ * *ops* array.
+ */
+__rte_experimental
+uint16_t
+rte_compressdev_dequeue_burst(uint8_t dev_id, uint16_t qp_id,
+ struct rte_comp_op **ops, uint16_t nb_ops);
+
+/**
+ * Enqueue a burst of operations for processing on a compression device.
+ *
+ * The rte_compressdev_enqueue_burst() function is invoked to place
+ * comp operations on the queue *qp_id* of the device designated by
+ * its *dev_id*.
+ *
+ * The *nb_ops* parameter is the number of operations to process which are
+ * supplied in the *ops* array of *rte_comp_op* structures.
+ *
+ * The rte_compressdev_enqueue_burst() function returns the number of
+ * operations it actually enqueued for processing. A return value equal to
+ * *nb_ops* means that all packets have been enqueued.
+ *
+ * @note All compression operations are Out-of-place (OOP) operations,
+ * as the size of the output data is different to the size of the input data.
+ *
+ * @note The rte_comp_op contains both input and output parameters and is the
+ * vehicle for the application to pass data into and out of the PMD. While an
+ * op is inflight, i.e. once it has been enqueued, the private_xform or stream
+ * attached to it and any mbufs or memory referenced by it should not be altered
+ * or freed by the application. The PMD may use or change some of this data at
+ * any time until it has been returned in a dequeue operation.
+ *
+ * @note The flush flag only applies to operations which return SUCCESS.
+ * In OUT_OF_SPACE cases whether STATEFUL or STATELESS, data in dest buffer
+ * is as if flush flag was FLUSH_NONE.
+ * @note flush flag only applies in compression direction. It has no meaning
+ * for decompression.
+ * @note: operation ordering is not maintained within the queue pair.
+ *
+ * @param dev_id
+ * Compress device identifier
+ * @param qp_id
+ * The index of the queue pair on which operations
+ * are to be enqueued for processing. The value
+ * must be in the range [0, nb_queue_pairs - 1]
+ * previously supplied to *rte_compressdev_configure*
+ * @param ops
+ * The address of an array of *nb_ops* pointers
+ * to *rte_comp_op* structures which contain
+ * the operations to be processed
+ * @param nb_ops
+ * The number of operations to process
+ * @return
+ * The number of operations actually enqueued on the device. The return
+ * value can be less than the value of the *nb_ops* parameter when the
+ * comp devices queue is full or if invalid parameters are specified in
+ * a *rte_comp_op*.
+ */
+__rte_experimental
+uint16_t
+rte_compressdev_enqueue_burst(uint8_t dev_id, uint16_t qp_id,
+ struct rte_comp_op **ops, uint16_t nb_ops);
+
+/**
+ * This should alloc a stream from the device's mempool and initialise it.
+ * The application should call this API when setting up for the stateful
+ * processing of a set of data on a device. The API can be called multiple
+ * times to set up a stream for each data set. The handle returned is only for
+ * use with ops of op_type STATEFUL and must be passed to the PMD
+ * with every op in the data stream
+ *
+ * @param dev_id
+ * Compress device identifier
+ * @param xform
+ * xform data
+ * @param stream
+ * Pointer to where PMD's private stream handle should be stored
+ *
+ * @return
+ * - 0 if successful and valid stream handle
+ * - <0 in error cases
+ * - Returns -EINVAL if input parameters are invalid.
+ * - Returns -ENOTSUP if comp device does not support STATEFUL operations.
+ * - Returns -ENOTSUP if comp device does not support the comp transform.
+ * - Returns -ENOMEM if the private stream could not be allocated.
+ *
+ */
+__rte_experimental
+int
+rte_compressdev_stream_create(uint8_t dev_id,
+ const struct rte_comp_xform *xform,
+ void **stream);
+
+/**
+ * This should clear the stream and return it to the device's mempool.
+ *
+ * @param dev_id
+ * Compress device identifier
+ *
+ * @param stream
+ * PMD's private stream data
+ *
+ * @return
+ * - 0 if successful
+ * - <0 in error cases
+ * - Returns -EINVAL if input parameters are invalid.
+ * - Returns -ENOTSUP if comp device does not support STATEFUL operations.
+ * - Returns -EBUSY if can't free stream as there are inflight operations
+ */
+__rte_experimental
+int
+rte_compressdev_stream_free(uint8_t dev_id, void *stream);
+
+/**
+ * This should alloc a private_xform from the device's mempool and initialise
+ * it. The application should call this API when setting up for stateless
+ * processing on a device. If it returns non-shareable, then the appl cannot
+ * share this handle with multiple in-flight ops and should call this API again
+ * to get a separate handle for every in-flight op.
+ * The handle returned is only valid for use with ops of op_type STATELESS.
+ *
+ * @param dev_id
+ * Compress device identifier
+ * @param xform
+ * xform data
+ * @param private_xform
+ * Pointer to where PMD's private_xform handle should be stored
+ *
+ * @return
+ * - if successful returns 0
+ * and valid private_xform handle
+ * - <0 in error cases
+ * - Returns -EINVAL if input parameters are invalid.
+ * - Returns -ENOTSUP if comp device does not support the comp transform.
+ * - Returns -ENOMEM if the private_xform could not be allocated.
+ */
+__rte_experimental
+int
+rte_compressdev_private_xform_create(uint8_t dev_id,
+ const struct rte_comp_xform *xform,
+ void **private_xform);
+
+/**
+ * This should clear the private_xform and return it to the device's mempool.
+ * It is the application's responsibility to ensure that private_xform data
+ * is not cleared while there are still in-flight operations using it.
+ *
+ * @param dev_id
+ * Compress device identifier
+ *
+ * @param private_xform
+ * PMD's private_xform data
+ *
+ * @return
+ * - 0 if successful
+ * - <0 in error cases
+ * - Returns -EINVAL if input parameters are invalid.
+ */
+__rte_experimental
+int
+rte_compressdev_private_xform_free(uint8_t dev_id, void *private_xform);
+
#ifdef __cplusplus
}
#endif
git.droids-corp.org / dpdk.git / blobdiff