-/*-
- *
- * Copyright(c) 2015-2016 Intel Corporation. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of Intel Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2015-2020 Intel Corporation.
*/
#ifndef _RTE_CRYPTODEV_H_
#include "rte_crypto.h"
#include "rte_dev.h"
#include <rte_common.h>
+#include <rte_config.h>
-#define CRYPTODEV_NAME_NULL_PMD crypto_null
-/**< Null crypto PMD device name */
-#define CRYPTODEV_NAME_AESNI_MB_PMD crypto_aesni_mb
-/**< AES-NI Multi buffer PMD device name */
-#define CRYPTODEV_NAME_AESNI_GCM_PMD crypto_aesni_gcm
-/**< AES-NI GCM PMD device name */
-#define CRYPTODEV_NAME_OPENSSL_PMD crypto_openssl
-/**< Open SSL Crypto PMD device name */
-#define CRYPTODEV_NAME_QAT_SYM_PMD crypto_qat
-/**< Intel QAT Symmetric Crypto PMD device name */
-#define CRYPTODEV_NAME_SNOW3G_PMD crypto_snow3g
-/**< SNOW 3G PMD device name */
-#define CRYPTODEV_NAME_KASUMI_PMD crypto_kasumi
-/**< KASUMI PMD device name */
-#define CRYPTODEV_NAME_ZUC_PMD crypto_zuc
-/**< KASUMI PMD device name */
-
-/** Crypto device type */
-enum rte_cryptodev_type {
- RTE_CRYPTODEV_NULL_PMD = 1, /**< Null crypto PMD */
- RTE_CRYPTODEV_AESNI_GCM_PMD, /**< AES-NI GCM PMD */
- RTE_CRYPTODEV_AESNI_MB_PMD, /**< AES-NI multi buffer PMD */
- RTE_CRYPTODEV_QAT_SYM_PMD, /**< QAT PMD Symmetric Crypto */
- RTE_CRYPTODEV_SNOW3G_PMD, /**< SNOW 3G PMD */
- RTE_CRYPTODEV_KASUMI_PMD, /**< KASUMI PMD */
- RTE_CRYPTODEV_ZUC_PMD, /**< ZUC PMD */
- RTE_CRYPTODEV_OPENSSL_PMD, /**< OpenSSL PMD */
-};
+#include "rte_cryptodev_trace_fp.h"
extern const char **rte_cyptodev_names;
RTE_FMT("%s() line %u: " RTE_FMT_HEAD(__VA_ARGS__,) "\n", \
__func__, __LINE__, RTE_FMT_TAIL(__VA_ARGS__,)))
-#define CDEV_PMD_LOG_ERR(dev, ...) \
- RTE_LOG(ERR, CRYPTODEV, \
- RTE_FMT("[%s] %s() line %u: " RTE_FMT_HEAD(__VA_ARGS__,) "\n", \
- dev, __func__, __LINE__, RTE_FMT_TAIL(__VA_ARGS__,)))
+#define CDEV_LOG_INFO(...) \
+ RTE_LOG(INFO, CRYPTODEV, \
+ RTE_FMT(RTE_FMT_HEAD(__VA_ARGS__,) "\n", \
+ RTE_FMT_TAIL(__VA_ARGS__,)))
-#ifdef RTE_LIBRTE_CRYPTODEV_DEBUG
#define CDEV_LOG_DEBUG(...) \
RTE_LOG(DEBUG, CRYPTODEV, \
RTE_FMT("%s() line %u: " RTE_FMT_HEAD(__VA_ARGS__,) "\n", \
RTE_FMT("[%s] %s: " RTE_FMT_HEAD(__VA_ARGS__,) "\n", \
dev, __func__, RTE_FMT_TAIL(__VA_ARGS__,)))
-#else
-#define CDEV_LOG_DEBUG(...) (void)0
-#define CDEV_PMD_TRACE(...) (void)0
-#endif
+/**
+ * A macro that points to an offset from the start
+ * of the crypto operation structure (rte_crypto_op)
+ *
+ * The returned pointer is cast to type t.
+ *
+ * @param c
+ * The crypto operation.
+ * @param o
+ * The offset from the start of the crypto operation.
+ * @param t
+ * The type to cast the result into.
+ */
+#define rte_crypto_op_ctod_offset(c, t, o) \
+ ((t)((char *)(c) + (o)))
+
+/**
+ * A macro that returns the physical address that points
+ * to an offset from the start of the crypto operation
+ * (rte_crypto_op)
+ *
+ * @param c
+ * The crypto operation.
+ * @param o
+ * The offset from the start of the crypto operation
+ * to calculate address from.
+ */
+#define rte_crypto_op_ctophys_offset(c, o) \
+ (rte_iova_t)((c)->phys_addr + (o))
+
+/**
+ * Crypto parameters range description
+ */
+struct rte_crypto_param_range {
+ uint16_t min; /**< minimum size */
+ uint16_t max; /**< maximum size */
+ uint16_t increment;
+ /**< if a range of sizes are supported,
+ * this parameter is used to indicate
+ * increments in byte size that are supported
+ * between the minimum and maximum
+ */
+};
/**
* Symmetric Crypto Capability
*/
struct rte_cryptodev_symmetric_capability {
enum rte_crypto_sym_xform_type xform_type;
- /**< Transform type : Authentication / Cipher */
+ /**< Transform type : Authentication / Cipher / AEAD */
RTE_STD_C11
union {
struct {
/**< authentication algorithm */
uint16_t block_size;
/**< algorithm block size */
- struct {
- uint16_t min; /**< minimum key size */
- uint16_t max; /**< maximum key size */
- uint16_t increment;
- /**< if a range of sizes are supported,
- * this parameter is used to indicate
- * increments in byte size that are supported
- * between the minimum and maximum */
- } key_size;
+ struct rte_crypto_param_range key_size;
/**< auth key size range */
- struct {
- uint16_t min; /**< minimum digest size */
- uint16_t max; /**< maximum digest size */
- uint16_t increment;
- /**< if a range of sizes are supported,
- * this parameter is used to indicate
- * increments in byte size that are supported
- * between the minimum and maximum */
- } digest_size;
+ struct rte_crypto_param_range digest_size;
/**< digest size range */
- struct {
- uint16_t min; /**< minimum aad size */
- uint16_t max; /**< maximum aad size */
- uint16_t increment;
- /**< if a range of sizes are supported,
- * this parameter is used to indicate
- * increments in byte size that are supported
- * between the minimum and maximum */
- } aad_size;
+ struct rte_crypto_param_range aad_size;
/**< Additional authentication data size range */
+ struct rte_crypto_param_range iv_size;
+ /**< Initialisation vector data size range */
} auth;
/**< Symmetric Authentication transform capabilities */
struct {
/**< cipher algorithm */
uint16_t block_size;
/**< algorithm block size */
- struct {
- uint16_t min; /**< minimum key size */
- uint16_t max; /**< maximum key size */
- uint16_t increment;
- /**< if a range of sizes are supported,
- * this parameter is used to indicate
- * increments in byte size that are supported
- * between the minimum and maximum */
- } key_size;
+ struct rte_crypto_param_range key_size;
/**< cipher key size range */
- struct {
- uint16_t min; /**< minimum iv size */
- uint16_t max; /**< maximum iv size */
- uint16_t increment;
- /**< if a range of sizes are supported,
- * this parameter is used to indicate
- * increments in byte size that are supported
- * between the minimum and maximum */
- } iv_size;
+ struct rte_crypto_param_range iv_size;
/**< Initialisation vector data size range */
} cipher;
/**< Symmetric Cipher transform capabilities */
+ struct {
+ enum rte_crypto_aead_algorithm algo;
+ /**< AEAD algorithm */
+ uint16_t block_size;
+ /**< algorithm block size */
+ struct rte_crypto_param_range key_size;
+ /**< AEAD key size range */
+ struct rte_crypto_param_range digest_size;
+ /**< digest size range */
+ struct rte_crypto_param_range aad_size;
+ /**< Additional authentication data size range */
+ struct rte_crypto_param_range iv_size;
+ /**< Initialisation vector data size range */
+ } aead;
};
};
+/**
+ * Asymmetric Xform Crypto Capability
+ *
+ */
+struct rte_cryptodev_asymmetric_xform_capability {
+ enum rte_crypto_asym_xform_type xform_type;
+ /**< Transform type: RSA/MODEXP/DH/DSA/MODINV */
+
+ uint32_t op_types;
+ /**< bitmask for supported rte_crypto_asym_op_type */
+
+ __extension__
+ union {
+ struct rte_crypto_param_range modlen;
+ /**< Range of modulus length supported by modulus based xform.
+ * Value 0 mean implementation default
+ */
+ };
+};
+
+/**
+ * Asymmetric Crypto Capability
+ *
+ */
+struct rte_cryptodev_asymmetric_capability {
+ struct rte_cryptodev_asymmetric_xform_capability xform_capa;
+};
+
+
/** Structure used to capture a capability of a crypto device */
struct rte_cryptodev_capabilities {
enum rte_crypto_op_type op;
union {
struct rte_cryptodev_symmetric_capability sym;
/**< Symmetric operation capability parameters */
+ struct rte_cryptodev_asymmetric_capability asym;
+ /**< Asymmetric operation capability parameters */
};
};
+/** Structure used to describe crypto algorithms */
+struct rte_cryptodev_sym_capability_idx {
+ enum rte_crypto_sym_xform_type type;
+ union {
+ enum rte_crypto_cipher_algorithm cipher;
+ enum rte_crypto_auth_algorithm auth;
+ enum rte_crypto_aead_algorithm aead;
+ } algo;
+};
+
+/**
+ * Structure used to describe asymmetric crypto xforms
+ * Each xform maps to one asym algorithm.
+ *
+ */
+struct rte_cryptodev_asym_capability_idx {
+ enum rte_crypto_asym_xform_type type;
+ /**< Asymmetric xform (algo) type */
+};
+
+/**
+ * Provide capabilities available for defined device and algorithm
+ *
+ * @param dev_id The identifier of the device.
+ * @param idx Description of crypto algorithms.
+ *
+ * @return
+ * - Return description of the symmetric crypto capability if exist.
+ * - Return NULL if the capability not exist.
+ */
+const struct rte_cryptodev_symmetric_capability *
+rte_cryptodev_sym_capability_get(uint8_t dev_id,
+ const struct rte_cryptodev_sym_capability_idx *idx);
+
+/**
+ * Provide capabilities available for defined device and xform
+ *
+ * @param dev_id The identifier of the device.
+ * @param idx Description of asym crypto xform.
+ *
+ * @return
+ * - Return description of the asymmetric crypto capability if exist.
+ * - Return NULL if the capability not exist.
+ */
+__rte_experimental
+const struct rte_cryptodev_asymmetric_xform_capability *
+rte_cryptodev_asym_capability_get(uint8_t dev_id,
+ const struct rte_cryptodev_asym_capability_idx *idx);
+
+/**
+ * Check if key size and initial vector are supported
+ * in crypto cipher capability
+ *
+ * @param capability Description of the symmetric crypto capability.
+ * @param key_size Cipher key size.
+ * @param iv_size Cipher initial vector size.
+ *
+ * @return
+ * - Return 0 if the parameters are in range of the capability.
+ * - Return -1 if the parameters are out of range of the capability.
+ */
+int
+rte_cryptodev_sym_capability_check_cipher(
+ const struct rte_cryptodev_symmetric_capability *capability,
+ uint16_t key_size, uint16_t iv_size);
+
+/**
+ * Check if key size and initial vector are supported
+ * in crypto auth capability
+ *
+ * @param capability Description of the symmetric crypto capability.
+ * @param key_size Auth key size.
+ * @param digest_size Auth digest size.
+ * @param iv_size Auth initial vector size.
+ *
+ * @return
+ * - Return 0 if the parameters are in range of the capability.
+ * - Return -1 if the parameters are out of range of the capability.
+ */
+int
+rte_cryptodev_sym_capability_check_auth(
+ const struct rte_cryptodev_symmetric_capability *capability,
+ uint16_t key_size, uint16_t digest_size, uint16_t iv_size);
+
+/**
+ * Check if key, digest, AAD and initial vector sizes are supported
+ * in crypto AEAD capability
+ *
+ * @param capability Description of the symmetric crypto capability.
+ * @param key_size AEAD key size.
+ * @param digest_size AEAD digest size.
+ * @param aad_size AEAD AAD size.
+ * @param iv_size AEAD IV size.
+ *
+ * @return
+ * - Return 0 if the parameters are in range of the capability.
+ * - Return -1 if the parameters are out of range of the capability.
+ */
+int
+rte_cryptodev_sym_capability_check_aead(
+ const struct rte_cryptodev_symmetric_capability *capability,
+ uint16_t key_size, uint16_t digest_size, uint16_t aad_size,
+ uint16_t iv_size);
+
+/**
+ * Check if op type is supported
+ *
+ * @param capability Description of the asymmetric crypto capability.
+ * @param op_type op type
+ *
+ * @return
+ * - Return 1 if the op type is supported
+ * - Return 0 if unsupported
+ */
+__rte_experimental
+int
+rte_cryptodev_asym_xform_capability_check_optype(
+ const struct rte_cryptodev_asymmetric_xform_capability *capability,
+ enum rte_crypto_asym_op_type op_type);
+
+/**
+ * Check if modulus length is in supported range
+ *
+ * @param capability Description of the asymmetric crypto capability.
+ * @param modlen modulus length.
+ *
+ * @return
+ * - Return 0 if the parameters are in range of the capability.
+ * - Return -1 if the parameters are out of range of the capability.
+ */
+__rte_experimental
+int
+rte_cryptodev_asym_xform_capability_check_modlen(
+ const struct rte_cryptodev_asymmetric_xform_capability *capability,
+ uint16_t modlen);
+
+/**
+ * Provide the cipher algorithm enum, given an algorithm string
+ *
+ * @param algo_enum A pointer to the cipher algorithm
+ * enum to be filled
+ * @param algo_string Authentication algo string
+ *
+ * @return
+ * - Return -1 if string is not valid
+ * - Return 0 is the string is valid
+ */
+int
+rte_cryptodev_get_cipher_algo_enum(enum rte_crypto_cipher_algorithm *algo_enum,
+ const char *algo_string);
+
+/**
+ * Provide the authentication algorithm enum, given an algorithm string
+ *
+ * @param algo_enum A pointer to the authentication algorithm
+ * enum to be filled
+ * @param algo_string Authentication algo string
+ *
+ * @return
+ * - Return -1 if string is not valid
+ * - Return 0 is the string is valid
+ */
+int
+rte_cryptodev_get_auth_algo_enum(enum rte_crypto_auth_algorithm *algo_enum,
+ const char *algo_string);
+
+/**
+ * Provide the AEAD algorithm enum, given an algorithm string
+ *
+ * @param algo_enum A pointer to the AEAD algorithm
+ * enum to be filled
+ * @param algo_string AEAD algorithm string
+ *
+ * @return
+ * - Return -1 if string is not valid
+ * - Return 0 is the string is valid
+ */
+int
+rte_cryptodev_get_aead_algo_enum(enum rte_crypto_aead_algorithm *algo_enum,
+ const char *algo_string);
+
+/**
+ * Provide the Asymmetric xform enum, given an xform string
+ *
+ * @param xform_enum A pointer to the xform type
+ * enum to be filled
+ * @param xform_string xform string
+ *
+ * @return
+ * - Return -1 if string is not valid
+ * - Return 0 if the string is valid
+ */
+__rte_experimental
+int
+rte_cryptodev_asym_get_xform_enum(enum rte_crypto_asym_xform_type *xform_enum,
+ const char *xform_string);
+
+
/** Macro used at end of crypto PMD list */
#define RTE_CRYPTODEV_END_OF_CAPABILITIES_LIST() \
{ RTE_CRYPTO_OP_TYPE_UNDEFINED }
*
* Keep these flags synchronised with rte_cryptodev_get_feature_name()
*/
-#define RTE_CRYPTODEV_FF_SYMMETRIC_CRYPTO (1ULL << 0)
+#define RTE_CRYPTODEV_FF_SYMMETRIC_CRYPTO (1ULL << 0)
/**< Symmetric crypto operations are supported */
-#define RTE_CRYPTODEV_FF_ASYMMETRIC_CRYPTO (1ULL << 1)
+#define RTE_CRYPTODEV_FF_ASYMMETRIC_CRYPTO (1ULL << 1)
/**< Asymmetric crypto operations are supported */
-#define RTE_CRYPTODEV_FF_SYM_OPERATION_CHAINING (1ULL << 2)
+#define RTE_CRYPTODEV_FF_SYM_OPERATION_CHAINING (1ULL << 2)
/**< Chaining symmetric crypto operations are supported */
-#define RTE_CRYPTODEV_FF_CPU_SSE (1ULL << 3)
+#define RTE_CRYPTODEV_FF_CPU_SSE (1ULL << 3)
/**< Utilises CPU SIMD SSE instructions */
-#define RTE_CRYPTODEV_FF_CPU_AVX (1ULL << 4)
+#define RTE_CRYPTODEV_FF_CPU_AVX (1ULL << 4)
/**< Utilises CPU SIMD AVX instructions */
-#define RTE_CRYPTODEV_FF_CPU_AVX2 (1ULL << 5)
+#define RTE_CRYPTODEV_FF_CPU_AVX2 (1ULL << 5)
/**< Utilises CPU SIMD AVX2 instructions */
-#define RTE_CRYPTODEV_FF_CPU_AESNI (1ULL << 6)
+#define RTE_CRYPTODEV_FF_CPU_AESNI (1ULL << 6)
/**< Utilises CPU AES-NI instructions */
-#define RTE_CRYPTODEV_FF_HW_ACCELERATED (1ULL << 7)
-/**< Operations are off-loaded to an external hardware accelerator */
-#define RTE_CRYPTODEV_FF_CPU_AVX512 (1ULL << 8)
+#define RTE_CRYPTODEV_FF_HW_ACCELERATED (1ULL << 7)
+/**< Operations are off-loaded to an
+ * external hardware accelerator
+ */
+#define RTE_CRYPTODEV_FF_CPU_AVX512 (1ULL << 8)
/**< Utilises CPU SIMD AVX512 instructions */
-#define RTE_CRYPTODEV_FF_MBUF_SCATTER_GATHER (1ULL << 9)
-/**< Scatter-gather mbufs are supported */
+#define RTE_CRYPTODEV_FF_IN_PLACE_SGL (1ULL << 9)
+/**< In-place Scatter-gather (SGL) buffers, with multiple segments,
+ * are supported
+ */
+#define RTE_CRYPTODEV_FF_OOP_SGL_IN_SGL_OUT (1ULL << 10)
+/**< Out-of-place Scatter-gather (SGL) buffers are
+ * supported in input and output
+ */
+#define RTE_CRYPTODEV_FF_OOP_SGL_IN_LB_OUT (1ULL << 11)
+/**< Out-of-place Scatter-gather (SGL) buffers are supported
+ * in input, combined with linear buffers (LB), with a
+ * single segment in output
+ */
+#define RTE_CRYPTODEV_FF_OOP_LB_IN_SGL_OUT (1ULL << 12)
+/**< Out-of-place Scatter-gather (SGL) buffers are supported
+ * in output, combined with linear buffers (LB) in input
+ */
+#define RTE_CRYPTODEV_FF_OOP_LB_IN_LB_OUT (1ULL << 13)
+/**< Out-of-place linear buffers (LB) are supported in input and output */
+#define RTE_CRYPTODEV_FF_CPU_NEON (1ULL << 14)
+/**< Utilises CPU NEON instructions */
+#define RTE_CRYPTODEV_FF_CPU_ARM_CE (1ULL << 15)
+/**< Utilises ARM CPU Cryptographic Extensions */
+#define RTE_CRYPTODEV_FF_SECURITY (1ULL << 16)
+/**< Support Security Protocol Processing */
+#define RTE_CRYPTODEV_FF_RSA_PRIV_OP_KEY_EXP (1ULL << 17)
+/**< Support RSA Private Key OP with exponent */
+#define RTE_CRYPTODEV_FF_RSA_PRIV_OP_KEY_QT (1ULL << 18)
+/**< Support RSA Private Key OP with CRT (quintuple) Keys */
+#define RTE_CRYPTODEV_FF_DIGEST_ENCRYPTED (1ULL << 19)
+/**< Support encrypted-digest operations where digest is appended to data */
+#define RTE_CRYPTODEV_FF_ASYM_SESSIONLESS (1ULL << 20)
+/**< Support asymmetric session-less operations */
+#define RTE_CRYPTODEV_FF_SYM_CPU_CRYPTO (1ULL << 21)
+/**< Support symmetric cpu-crypto processing */
+#define RTE_CRYPTODEV_FF_SYM_SESSIONLESS (1ULL << 22)
+/**< Support symmetric session-less operations */
/**
/** Crypto device information */
struct rte_cryptodev_info {
- const char *driver_name; /**< Driver name. */
- enum rte_cryptodev_type dev_type; /**< Device type */
- struct rte_pci_device *pci_dev; /**< PCI information. */
+ const char *driver_name; /**< Driver name. */
+ uint8_t driver_id; /**< Driver identifier */
+ struct rte_device *device; /**< Generic device information. */
- uint64_t feature_flags; /**< Feature flags */
+ uint64_t feature_flags;
+ /**< Feature flags exposes HW/SW features for the given device */
const struct rte_cryptodev_capabilities *capabilities;
/**< Array of devices supported capabilities */
unsigned max_nb_queue_pairs;
/**< Maximum number of queues pairs supported by device. */
+ uint16_t min_mbuf_headroom_req;
+ /**< Minimum mbuf headroom required by device */
+
+ uint16_t min_mbuf_tailroom_req;
+ /**< Minimum mbuf tailroom required by device */
+
struct {
unsigned max_nb_sessions;
- /**< Maximum number of sessions supported by device. */
+ /**< Maximum number of sessions supported by device.
+ * If 0, the device does not have any limitation in
+ * number of sessions that can be used.
+ */
} sym;
};
/** Crypto device queue pair configuration structure. */
struct rte_cryptodev_qp_conf {
uint32_t nb_descriptors; /**< Number of descriptors per queue pair */
+ struct rte_mempool *mp_session;
+ /**< The mempool for creating session in sessionless mode */
+ struct rte_mempool *mp_session_private;
+ /**< The mempool for creating sess private data in sessionless mode */
};
/**
/**< Total error count on operations dequeued */
};
-#define RTE_CRYPTODEV_VDEV_DEFAULT_MAX_NB_QUEUE_PAIRS 8
-#define RTE_CRYPTODEV_VDEV_DEFAULT_MAX_NB_SESSIONS 2048
-
-/**
- * @internal
- * Initialisation parameters for virtual crypto devices
- */
-struct rte_crypto_vdev_init_params {
- unsigned max_nb_queue_pairs;
- unsigned max_nb_sessions;
- uint8_t socket_id;
-};
-
-/**
- * Parse virtual device initialisation parameters input arguments
- * @internal
- *
- * @params params Initialisation parameters with defaults set.
- * @params input_args Command line arguments
- *
- * @return
- * 0 on successful parse
- * <0 on failure to parse
- */
-int
-rte_cryptodev_parse_vdev_init_params(
- struct rte_crypto_vdev_init_params *params,
- const char *input_args);
+#define RTE_CRYPTODEV_NAME_MAX_LEN (64)
+/**< Max length of name of crypto PMD */
/**
- * Create a virtual crypto device
+ * Get the device identifier for the named crypto device.
*
- * @param name Cryptodev PMD name of device to be created.
- * @param args Options arguments for device.
+ * @param name device name to select the device structure.
*
* @return
- * - On successful creation of the cryptodev the device index is returned,
- * which will be between 0 and rte_cryptodev_count().
- * - In the case of a failure, returns -1.
+ * - Returns crypto device identifier on success.
+ * - Return -1 on failure to find named crypto device.
*/
extern int
-rte_cryptodev_create_vdev(const char *name, const char *args);
+rte_cryptodev_get_dev_id(const char *name);
/**
- * Get the device identifier for the named crypto device.
+ * Get the crypto device name given a device identifier.
*
- * @param name device name to select the device structure.
+ * @param dev_id
+ * The identifier of the device
*
* @return
- * - Returns crypto device identifier on success.
- * - Return -1 on failure to find named crypto device.
+ * - Returns crypto device name.
+ * - Returns NULL if crypto device is not present.
*/
-extern int
-rte_cryptodev_get_dev_id(const char *name);
+extern const char *
+rte_cryptodev_name_get(uint8_t dev_id);
/**
* Get the total number of crypto devices that have been successfully
extern uint8_t
rte_cryptodev_count(void);
+/**
+ * Get number of crypto device defined type.
+ *
+ * @param driver_id driver identifier.
+ *
+ * @return
+ * Returns number of crypto device.
+ */
extern uint8_t
-rte_cryptodev_count_devtype(enum rte_cryptodev_type type);
+rte_cryptodev_device_count_by_driver(uint8_t driver_id);
+
+/**
+ * Get number and identifiers of attached crypto devices that
+ * use the same crypto driver.
+ *
+ * @param driver_name driver name.
+ * @param devices output devices identifiers.
+ * @param nb_devices maximal number of devices.
+ *
+ * @return
+ * Returns number of attached crypto device.
+ */
+uint8_t
+rte_cryptodev_devices_get(const char *driver_name, uint8_t *devices,
+ uint8_t nb_devices);
/*
* Return the NUMA socket to which a device is connected
*
int socket_id; /**< Socket to allocate resources on */
uint16_t nb_queue_pairs;
/**< Number of queue pairs to configure on device */
-
- struct {
- uint32_t nb_objs; /**< Number of objects in mempool */
- uint32_t cache_size; /**< l-core object cache size */
- } session_mp; /**< Session mempool configuration */
+ uint64_t ff_disable;
+ /**< Feature flags to be disabled. Only the following features are
+ * allowed to be disabled,
+ * - RTE_CRYPTODEV_FF_SYMMETRIC_CRYPTO
+ * - RTE_CRYPTODEV_FF_ASYMMETRIC_CRYPTO
+ * - RTE_CRYTPODEV_FF_SECURITY
+ */
};
/**
* - 1] previously supplied to
* rte_cryptodev_configure().
* @param qp_conf The pointer to the configuration data to be
- * used for the queue pair. NULL value is
- * allowed, in which case default configuration
- * will be used.
+ * used for the queue pair.
* @param socket_id The *socket_id* argument is the socket
* identifier in case of NUMA. The value can be
* *SOCKET_ID_ANY* if there is no NUMA constraint
rte_cryptodev_queue_pair_setup(uint8_t dev_id, uint16_t queue_pair_id,
const struct rte_cryptodev_qp_conf *qp_conf, int socket_id);
-/**
- * Start a specified queue pair of a device. It is used
- * when deferred_start flag of the specified queue is true.
- *
- * @param dev_id The identifier of the device
- * @param queue_pair_id The index of the queue pair to start. The value
- * must be in the range [0, nb_queue_pair - 1]
- * previously supplied to
- * rte_crypto_dev_configure().
- * @return
- * - 0: Success, the transmit queue is correctly set up.
- * - -EINVAL: The dev_id or the queue_id out of range.
- * - -ENOTSUP: The function not supported in PMD driver.
- */
-extern int
-rte_cryptodev_queue_pair_start(uint8_t dev_id, uint16_t queue_pair_id);
-
-/**
- * Stop specified queue pair of a device
- *
- * @param dev_id The identifier of the device
- * @param queue_pair_id The index of the queue pair to stop. The value
- * must be in the range [0, nb_queue_pair - 1]
- * previously supplied to
- * rte_cryptodev_configure().
- * @return
- * - 0: Success, the transmit queue is correctly set up.
- * - -EINVAL: The dev_id or the queue_id out of range.
- * - -ENOTSUP: The function not supported in PMD driver.
- */
-extern int
-rte_cryptodev_queue_pair_stop(uint8_t dev_id, uint16_t queue_pair_id);
-
/**
* Get the number of queue pairs on a specific crypto device
*
* @param dev_info A pointer to a structure of type
* *rte_cryptodev_info* to be filled with the
* contextual information of the device.
+ *
+ * @note The capabilities field of dev_info is set to point to the first
+ * element of an array of struct rte_cryptodev_capabilities. The element after
+ * the last valid element has it's op field set to
+ * RTE_CRYPTO_OP_TYPE_UNDEFINED.
*/
extern void
rte_cryptodev_info_get(uint8_t dev_id, struct rte_cryptodev_info *dev_info);
enqueue_pkt_burst_t enqueue_burst;
/**< Pointer to PMD transmit function. */
- const struct rte_cryptodev_driver *driver;
- /**< Driver for this device */
struct rte_cryptodev_data *data;
/**< Pointer to device data */
struct rte_cryptodev_ops *dev_ops;
/**< Functions exported by PMD */
uint64_t feature_flags;
- /**< Supported features */
- struct rte_pci_device *pci_dev;
- /**< PCI info. supplied by probing */
+ /**< Feature flags exposes HW/SW features for the given device */
+ struct rte_device *device;
+ /**< Backing device */
- enum rte_cryptodev_type dev_type;
- /**< Crypto device type */
+ uint8_t driver_id;
+ /**< Crypto driver identifier*/
struct rte_cryptodev_cb_list link_intr_cbs;
/**< User application callback for interrupts if present */
+ void *security_ctx;
+ /**< Context for security ops */
+
__extension__
uint8_t attached : 1;
/**< Flag indicating the device is attached */
} __rte_cache_aligned;
-
-#define RTE_CRYPTODEV_NAME_MAX_LEN (64)
-/**< Max length of name of crypto PMD */
+void *
+rte_cryptodev_get_sec_ctx(uint8_t dev_id);
/**
*
nb_ops = (*dev->dequeue_burst)
(dev->data->queue_pairs[qp_id], ops, nb_ops);
+ rte_cryptodev_trace_dequeue_burst(dev_id, qp_id, (void **)ops, nb_ops);
return nb_ops;
}
{
struct rte_cryptodev *dev = &rte_cryptodevs[dev_id];
+ rte_cryptodev_trace_enqueue_burst(dev_id, qp_id, (void **)ops, nb_ops);
return (*dev->enqueue_burst)(
dev->data->queue_pairs[qp_id], ops, nb_ops);
}
-/** Cryptodev symmetric crypto session */
+/** Cryptodev symmetric crypto session
+ * Each session is derived from a fixed xform chain. Therefore each session
+ * has a fixed algo, key, op-type, digest_len etc.
+ */
struct rte_cryptodev_sym_session {
- RTE_STD_C11
- struct {
- uint8_t dev_id;
- /**< Device Id */
- enum rte_cryptodev_type dev_type;
- /** Crypto Device type session created on */
- struct rte_mempool *mp;
- /**< Mempool session allocated from */
- } __rte_aligned(8);
- /**< Public symmetric session details */
-
- __extension__ char _private[0];
- /**< Private session material */
+ uint64_t opaque_data;
+ /**< Can be used for external metadata */
+ uint16_t nb_drivers;
+ /**< number of elements in sess_data array */
+ uint16_t user_data_sz;
+ /**< session user data will be placed after sess_data */
+ __extension__ struct {
+ void *data;
+ uint16_t refcnt;
+ } sess_data[0];
+ /**< Driver specific session material, variable size */
};
+/** Cryptodev asymmetric crypto session */
+struct rte_cryptodev_asym_session {
+ __extension__ void *sess_private_data[0];
+ /**< Private asymmetric session material */
+};
/**
- * Initialise a session for symmetric cryptographic operations.
+ * Create a symmetric session mempool.
*
- * This function is used by the client to initialize immutable
- * parameters of symmetric cryptographic operation.
- * To perform the operation the rte_cryptodev_enqueue_burst function is
- * used. Each mbuf should contain a reference to the session
- * pointer returned from this function contained within it's crypto_op if a
- * session-based operation is being provisioned. Memory to contain the session
- * information is allocated from within mempool managed by the cryptodev.
+ * @param name
+ * The unique mempool name.
+ * @param nb_elts
+ * The number of elements in the mempool.
+ * @param elt_size
+ * The size of the element. This value will be ignored if it is smaller than
+ * the minimum session header size required for the system. For the user who
+ * want to use the same mempool for sym session and session private data it
+ * can be the maximum value of all existing devices' private data and session
+ * header sizes.
+ * @param cache_size
+ * The number of per-lcore cache elements
+ * @param priv_size
+ * The private data size of each session.
+ * @param socket_id
+ * The *socket_id* argument is the socket identifier in the case of
+ * NUMA. The value can be *SOCKET_ID_ANY* if there is no NUMA
+ * constraint for the reserved zone.
*
- * The rte_cryptodev_session_free must be called to free allocated
- * memory when the session is no longer required.
+ * @return
+ * - On success return size of the session
+ * - On failure returns 0
+ */
+__rte_experimental
+struct rte_mempool *
+rte_cryptodev_sym_session_pool_create(const char *name, uint32_t nb_elts,
+ uint32_t elt_size, uint32_t cache_size, uint16_t priv_size,
+ int socket_id);
+
+/**
+ * Create symmetric crypto session header (generic with no private data)
*
- * @param dev_id The device identifier.
- * @param xform Crypto transform chain.
+ * @param mempool Symmetric session mempool to allocate session
+ * objects from
+ * @return
+ * - On success return pointer to sym-session
+ * - On failure returns NULL
+ */
+struct rte_cryptodev_sym_session *
+rte_cryptodev_sym_session_create(struct rte_mempool *mempool);
+
+/**
+ * Create asymmetric crypto session header (generic with no private data)
+ *
+ * @param mempool mempool to allocate asymmetric session
+ * objects from
+ * @return
+ * - On success return pointer to asym-session
+ * - On failure returns NULL
+ */
+__rte_experimental
+struct rte_cryptodev_asym_session *
+rte_cryptodev_asym_session_create(struct rte_mempool *mempool);
+
+/**
+ * Frees symmetric crypto session header, after checking that all
+ * the device private data has been freed, returning it
+ * to its original mempool.
+ *
+ * @param sess Session header to be freed.
+ *
+ * @return
+ * - 0 if successful.
+ * - -EINVAL if session is NULL.
+ * - -EBUSY if not all device private data has been freed.
+ */
+int
+rte_cryptodev_sym_session_free(struct rte_cryptodev_sym_session *sess);
+/**
+ * Frees asymmetric crypto session header, after checking that all
+ * the device private data has been freed, returning it
+ * to its original mempool.
+ *
+ * @param sess Session header to be freed.
*
* @return
- * Pointer to the created session or NULL
+ * - 0 if successful.
+ * - -EINVAL if session is NULL.
+ * - -EBUSY if not all device private data has been freed.
*/
-extern struct rte_cryptodev_sym_session *
-rte_cryptodev_sym_session_create(uint8_t dev_id,
- struct rte_crypto_sym_xform *xform);
+__rte_experimental
+int
+rte_cryptodev_asym_session_free(struct rte_cryptodev_asym_session *sess);
+
+/**
+ * Fill out private data for the device id, based on its device type.
+ *
+ * @param dev_id ID of device that we want the session to be used on
+ * @param sess Session where the private data will be attached to
+ * @param xforms Symmetric crypto transform operations to apply on flow
+ * processed with this session
+ * @param mempool Mempool where the private data is allocated.
+ *
+ * @return
+ * - On success, zero.
+ * - -EINVAL if input parameters are invalid.
+ * - -ENOTSUP if crypto device does not support the crypto transform or
+ * does not support symmetric operations.
+ * - -ENOMEM if the private session could not be allocated.
+ */
+int
+rte_cryptodev_sym_session_init(uint8_t dev_id,
+ struct rte_cryptodev_sym_session *sess,
+ struct rte_crypto_sym_xform *xforms,
+ struct rte_mempool *mempool);
/**
- * Free the memory associated with a previously allocated session.
+ * Initialize asymmetric session on a device with specific asymmetric xform
+ *
+ * @param dev_id ID of device that we want the session to be used on
+ * @param sess Session to be set up on a device
+ * @param xforms Asymmetric crypto transform operations to apply on flow
+ * processed with this session
+ * @param mempool Mempool to be used for internal allocation.
+ *
+ * @return
+ * - On success, zero.
+ * - -EINVAL if input parameters are invalid.
+ * - -ENOTSUP if crypto device does not support the crypto transform.
+ * - -ENOMEM if the private session could not be allocated.
+ */
+__rte_experimental
+int
+rte_cryptodev_asym_session_init(uint8_t dev_id,
+ struct rte_cryptodev_asym_session *sess,
+ struct rte_crypto_asym_xform *xforms,
+ struct rte_mempool *mempool);
+
+/**
+ * Frees private data for the device id, based on its device type,
+ * returning it to its mempool. It is the application's responsibility
+ * to ensure that private session data is not cleared while there are
+ * still in-flight operations using it.
+ *
+ * @param dev_id ID of device that uses the session.
+ * @param sess Session containing the reference to the private data
+ *
+ * @return
+ * - 0 if successful.
+ * - -EINVAL if device is invalid or session is NULL.
+ * - -ENOTSUP if crypto device does not support symmetric operations.
+ */
+int
+rte_cryptodev_sym_session_clear(uint8_t dev_id,
+ struct rte_cryptodev_sym_session *sess);
+
+/**
+ * Frees resources held by asymmetric session during rte_cryptodev_session_init
+ *
+ * @param dev_id ID of device that uses the asymmetric session.
+ * @param sess Asymmetric session setup on device using
+ * rte_cryptodev_session_init
+ * @return
+ * - 0 if successful.
+ * - -EINVAL if device is invalid or session is NULL.
+ */
+__rte_experimental
+int
+rte_cryptodev_asym_session_clear(uint8_t dev_id,
+ struct rte_cryptodev_asym_session *sess);
+
+/**
+ * Get the size of the header session, for all registered drivers excluding
+ * the user data size.
+ *
+ * @return
+ * Size of the symmetric header session.
+ */
+unsigned int
+rte_cryptodev_sym_get_header_session_size(void);
+
+/**
+ * Get the size of the header session from created session.
+ *
+ * @param sess
+ * The sym cryptodev session pointer
+ *
+ * @return
+ * - If sess is not NULL, return the size of the header session including
+ * the private data size defined within sess.
+ * - If sess is NULL, return 0.
+ */
+__rte_experimental
+unsigned int
+rte_cryptodev_sym_get_existing_header_session_size(
+ struct rte_cryptodev_sym_session *sess);
+
+/**
+ * Get the size of the asymmetric session header, for all registered drivers.
+ *
+ * @return
+ * Size of the asymmetric header session.
+ */
+__rte_experimental
+unsigned int
+rte_cryptodev_asym_get_header_session_size(void);
+
+/**
+ * Get the size of the private symmetric session data
+ * for a device.
*
* @param dev_id The device identifier.
- * @param session Session pointer previously allocated by
+ *
+ * @return
+ * - Size of the private data, if successful
+ * - 0 if device is invalid or does not have private
+ * symmetric session
+ */
+unsigned int
+rte_cryptodev_sym_get_private_session_size(uint8_t dev_id);
+
+/**
+ * Get the size of the private data for asymmetric session
+ * on device
+ *
+ * @param dev_id The device identifier.
+ *
+ * @return
+ * - Size of the asymmetric private data, if successful
+ * - 0 if device is invalid or does not have private session
+ */
+__rte_experimental
+unsigned int
+rte_cryptodev_asym_get_private_session_size(uint8_t dev_id);
+
+/**
+ * Provide driver identifier.
+ *
+ * @param name
+ * The pointer to a driver name.
+ * @return
+ * The driver type identifier or -1 if no driver found
+ */
+int rte_cryptodev_driver_id_get(const char *name);
+
+/**
+ * Provide driver name.
+ *
+ * @param driver_id
+ * The driver identifier.
+ * @return
+ * The driver name or null if no driver found
+ */
+const char *rte_cryptodev_driver_name_get(uint8_t driver_id);
+
+/**
+ * Store user data in a session.
+ *
+ * @param sess Session pointer allocated by
+ * *rte_cryptodev_sym_session_create*.
+ * @param data Pointer to the user data.
+ * @param size Size of the user data.
+ *
+ * @return
+ * - On success, zero.
+ * - On failure, a negative value.
+ */
+__rte_experimental
+int
+rte_cryptodev_sym_session_set_user_data(
+ struct rte_cryptodev_sym_session *sess,
+ void *data,
+ uint16_t size);
+
+/**
+ * Get user data stored in a session.
+ *
+ * @param sess Session pointer allocated by
* *rte_cryptodev_sym_session_create*.
*
* @return
- * NULL on successful freeing of session.
- * Session pointer on failure to free session.
+ * - On success return pointer to user data.
+ * - On failure returns NULL.
*/
-extern struct rte_cryptodev_sym_session *
-rte_cryptodev_sym_session_free(uint8_t dev_id,
- struct rte_cryptodev_sym_session *session);
+__rte_experimental
+void *
+rte_cryptodev_sym_session_get_user_data(
+ struct rte_cryptodev_sym_session *sess);
+/**
+ * Perform actual crypto processing (encrypt/digest or auth/decrypt)
+ * on user provided data.
+ *
+ * @param dev_id The device identifier.
+ * @param sess Cryptodev session structure
+ * @param ofs Start and stop offsets for auth and cipher operations
+ * @param vec Vectorized operation descriptor
+ *
+ * @return
+ * - Returns number of successfully processed packets.
+ */
+__rte_experimental
+uint32_t
+rte_cryptodev_sym_cpu_crypto_process(uint8_t dev_id,
+ struct rte_cryptodev_sym_session *sess, union rte_crypto_sym_ofs ofs,
+ struct rte_crypto_sym_vec *vec);
#ifdef __cplusplus
}