-/*-
- *
- * Copyright(c) 2015-2017 Intel Corporation. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of Intel Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2015-2017 Intel Corporation.
*/
#ifndef _RTE_CRYPTODEV_H_
RTE_FMT(RTE_FMT_HEAD(__VA_ARGS__,) "\n", \
RTE_FMT_TAIL(__VA_ARGS__,)))
-#ifdef RTE_LIBRTE_CRYPTODEV_DEBUG
#define CDEV_LOG_DEBUG(...) \
RTE_LOG(DEBUG, CRYPTODEV, \
RTE_FMT("%s() line %u: " RTE_FMT_HEAD(__VA_ARGS__,) "\n", \
RTE_FMT("[%s] %s: " RTE_FMT_HEAD(__VA_ARGS__,) "\n", \
dev, __func__, RTE_FMT_TAIL(__VA_ARGS__,)))
-#else
-#define CDEV_LOG_DEBUG(...) (void)0
-#define CDEV_PMD_TRACE(...) (void)0
-#endif
-
-
-
/**
* A macro that points to an offset from the start
* of the crypto operation structure (rte_crypto_op)
*
* Keep these flags synchronised with rte_cryptodev_get_feature_name()
*/
-#define RTE_CRYPTODEV_FF_SYMMETRIC_CRYPTO (1ULL << 0)
+#define RTE_CRYPTODEV_FF_SYMMETRIC_CRYPTO (1ULL << 0)
/**< Symmetric crypto operations are supported */
-#define RTE_CRYPTODEV_FF_ASYMMETRIC_CRYPTO (1ULL << 1)
+#define RTE_CRYPTODEV_FF_ASYMMETRIC_CRYPTO (1ULL << 1)
/**< Asymmetric crypto operations are supported */
-#define RTE_CRYPTODEV_FF_SYM_OPERATION_CHAINING (1ULL << 2)
+#define RTE_CRYPTODEV_FF_SYM_OPERATION_CHAINING (1ULL << 2)
/**< Chaining symmetric crypto operations are supported */
-#define RTE_CRYPTODEV_FF_CPU_SSE (1ULL << 3)
+#define RTE_CRYPTODEV_FF_CPU_SSE (1ULL << 3)
/**< Utilises CPU SIMD SSE instructions */
-#define RTE_CRYPTODEV_FF_CPU_AVX (1ULL << 4)
+#define RTE_CRYPTODEV_FF_CPU_AVX (1ULL << 4)
/**< Utilises CPU SIMD AVX instructions */
-#define RTE_CRYPTODEV_FF_CPU_AVX2 (1ULL << 5)
+#define RTE_CRYPTODEV_FF_CPU_AVX2 (1ULL << 5)
/**< Utilises CPU SIMD AVX2 instructions */
-#define RTE_CRYPTODEV_FF_CPU_AESNI (1ULL << 6)
+#define RTE_CRYPTODEV_FF_CPU_AESNI (1ULL << 6)
/**< Utilises CPU AES-NI instructions */
-#define RTE_CRYPTODEV_FF_HW_ACCELERATED (1ULL << 7)
-/**< Operations are off-loaded to an external hardware accelerator */
-#define RTE_CRYPTODEV_FF_CPU_AVX512 (1ULL << 8)
+#define RTE_CRYPTODEV_FF_HW_ACCELERATED (1ULL << 7)
+/**< Operations are off-loaded to an
+ * external hardware accelerator
+ */
+#define RTE_CRYPTODEV_FF_CPU_AVX512 (1ULL << 8)
/**< Utilises CPU SIMD AVX512 instructions */
-#define RTE_CRYPTODEV_FF_MBUF_SCATTER_GATHER (1ULL << 9)
-/**< Scatter-gather mbufs are supported */
-#define RTE_CRYPTODEV_FF_CPU_NEON (1ULL << 10)
+#define RTE_CRYPTODEV_FF_IN_PLACE_SGL (1ULL << 9)
+/**< In-place Scatter-gather (SGL) buffers, with multiple segments,
+ * are supported
+ */
+#define RTE_CRYPTODEV_FF_OOP_SGL_IN_SGL_OUT (1ULL << 10)
+/**< Out-of-place Scatter-gather (SGL) buffers are
+ * supported in input and output
+ */
+#define RTE_CRYPTODEV_FF_OOP_SGL_IN_LB_OUT (1ULL << 11)
+/**< Out-of-place Scatter-gather (SGL) buffers are supported
+ * in input, combined with linear buffers (LB), with a
+ * single segment in output
+ */
+#define RTE_CRYPTODEV_FF_OOP_LB_IN_SGL_OUT (1ULL << 12)
+/**< Out-of-place Scatter-gather (SGL) buffers are supported
+ * in output, combined with linear buffers (LB) in input
+ */
+#define RTE_CRYPTODEV_FF_OOP_LB_IN_LB_OUT (1ULL << 13)
+/**< Out-of-place linear buffers (LB) are supported in input and output */
+#define RTE_CRYPTODEV_FF_CPU_NEON (1ULL << 14)
/**< Utilises CPU NEON instructions */
-#define RTE_CRYPTODEV_FF_CPU_ARM_CE (1ULL << 11)
+#define RTE_CRYPTODEV_FF_CPU_ARM_CE (1ULL << 15)
/**< Utilises ARM CPU Cryptographic Extensions */
-#define RTE_CRYPTODEV_FF_SECURITY (1ULL << 12)
+#define RTE_CRYPTODEV_FF_SECURITY (1ULL << 16)
/**< Support Security Protocol Processing */
/** Crypto device information */
struct rte_cryptodev_info {
- const char *driver_name; /**< Driver name. */
- uint8_t driver_id; /**< Driver identifier */
- struct rte_pci_device *pci_dev; /**< PCI information. */
+ const char *driver_name; /**< Driver name. */
+ uint8_t driver_id; /**< Driver identifier */
+ struct rte_device *device; /**< Generic device information. */
- uint64_t feature_flags; /**< Feature flags */
+ uint64_t feature_flags;
+ /**< Feature flags exposes HW/SW features for the given device */
const struct rte_cryptodev_capabilities *capabilities;
/**< Array of devices supported capabilities */
struct {
unsigned max_nb_sessions;
- /**< Maximum number of sessions supported by device. */
- unsigned int max_nb_sessions_per_qp;
- /**< Maximum number of sessions per queue pair.
- * Default 0 for infinite sessions
+ /**< Maximum number of sessions supported by device.
+ * If 0, the device does not have any limitation in
+ * number of sessions that can be used.
*/
} sym;
};
const struct rte_cryptodev_qp_conf *qp_conf, int socket_id,
struct rte_mempool *session_pool);
-/**
- * Start a specified queue pair of a device. It is used
- * when deferred_start flag of the specified queue is true.
- *
- * @param dev_id The identifier of the device
- * @param queue_pair_id The index of the queue pair to start. The value
- * must be in the range [0, nb_queue_pair - 1]
- * previously supplied to
- * rte_crypto_dev_configure().
- * @return
- * - 0: Success, the transmit queue is correctly set up.
- * - -EINVAL: The dev_id or the queue_id out of range.
- * - -ENOTSUP: The function not supported in PMD driver.
- */
-extern int
-rte_cryptodev_queue_pair_start(uint8_t dev_id, uint16_t queue_pair_id);
-
-/**
- * Stop specified queue pair of a device
- *
- * @param dev_id The identifier of the device
- * @param queue_pair_id The index of the queue pair to stop. The value
- * must be in the range [0, nb_queue_pair - 1]
- * previously supplied to
- * rte_cryptodev_configure().
- * @return
- * - 0: Success, the transmit queue is correctly set up.
- * - -EINVAL: The dev_id or the queue_id out of range.
- * - -ENOTSUP: The function not supported in PMD driver.
- */
-extern int
-rte_cryptodev_queue_pair_stop(uint8_t dev_id, uint16_t queue_pair_id);
-
/**
* Get the number of queue pairs on a specific crypto device
*
struct rte_cryptodev_ops *dev_ops;
/**< Functions exported by PMD */
uint64_t feature_flags;
- /**< Supported features */
+ /**< Feature flags exposes HW/SW features for the given device */
struct rte_device *device;
/**< Backing device */
/**
* Frees private data for the device id, based on its device type,
- * returning it to its mempool.
+ * returning it to its mempool. It is the application's responsibility
+ * to ensure that private session data is not cleared while there are
+ * still in-flight operations using it.
*
* @param dev_id ID of device that uses the session.
* @param sess Session containing the reference to the private data
* Get the size of the header session, for all registered drivers.
*
* @return
- * Size of the header session.
+ * Size of the symmetric eader session.
*/
unsigned int
-rte_cryptodev_get_header_session_size(void);
+rte_cryptodev_sym_get_header_session_size(void);
/**
- * Get the size of the private session data for a device.
+ * Get the size of the private symmetric session data
+ * for a device.
*
* @param dev_id The device identifier.
*
* @return
* - Size of the private data, if successful
- * - 0 if device is invalid or does not have private session
+ * - 0 if device is invalid or does not have private
+ * symmetric session
*/
unsigned int
-rte_cryptodev_get_private_session_size(uint8_t dev_id);
+rte_cryptodev_sym_get_private_session_size(uint8_t dev_id);
/**
- * Attach queue pair with sym session.
+ * Provide driver identifier.
*
- * @param dev_id Device to which the session will be attached.
- * @param qp_id Queue pair to which the session will be attached.
- * @param session Session pointer previously allocated by
- * *rte_cryptodev_sym_session_create*.
+ * @param name
+ * The pointer to a driver name.
+ * @return
+ * The driver type identifier or -1 if no driver found
+ */
+int rte_cryptodev_driver_id_get(const char *name);
+
+/**
+ * Provide driver name.
*
+ * @param driver_id
+ * The driver identifier.
* @return
- * - On success, zero.
- * - On failure, a negative value.
+ * The driver name or null if no driver found
*/
-int
-rte_cryptodev_queue_pair_attach_sym_session(uint8_t dev_id, uint16_t qp_id,
- struct rte_cryptodev_sym_session *session);
+const char *rte_cryptodev_driver_name_get(uint8_t driver_id);
/**
- * Detach queue pair with sym session.
+ * Set private data for a session.
*
- * @param dev_id Device to which the session is attached.
- * @param qp_id Queue pair to which the session is attached.
- * @param session Session pointer previously allocated by
+ * @param sess Session pointer allocated by
* *rte_cryptodev_sym_session_create*.
+ * @param data Pointer to the private data.
+ * @param size Size of the private data.
*
* @return
* - On success, zero.
* - On failure, a negative value.
*/
-int
-rte_cryptodev_queue_pair_detach_sym_session(uint8_t dev_id, uint16_t qp_id,
- struct rte_cryptodev_sym_session *session);
+int __rte_experimental
+rte_cryptodev_sym_session_set_private_data(
+ struct rte_cryptodev_sym_session *sess,
+ void *data,
+ uint16_t size);
/**
- * Provide driver identifier.
+ * Get private data of a session.
*
- * @param name
- * The pointer to a driver name.
- * @return
- * The driver type identifier or -1 if no driver found
- */
-int rte_cryptodev_driver_id_get(const char *name);
-
-/**
- * Provide driver name.
+ * @param sess Session pointer allocated by
+ * *rte_cryptodev_sym_session_create*.
*
- * @param driver_id
- * The driver identifier.
* @return
- * The driver name or null if no driver found
+ * - On success return pointer to private data.
+ * - On failure returns NULL.
*/
-const char *rte_cryptodev_driver_name_get(uint8_t driver_id);
+void * __rte_experimental
+rte_cryptodev_sym_session_get_private_data(
+ struct rte_cryptodev_sym_session *sess);
#ifdef __cplusplus
}
git.droids-corp.org / dpdk.git / blobdiff