*
* Defines RTE Crypto Device APIs for the provisioning of cipher and
* authentication operations.
- *
- * @b EXPERIMENTAL: this API may change without prior notice
- *
*/
#ifdef __cplusplus
extern "C" {
#endif
+#include "rte_kvargs.h"
#include "rte_crypto.h"
#include "rte_dev.h"
+#include <rte_common.h>
-#define CRYPTODEV_NAME_NULL_PMD ("cryptodev_null_pmd")
+#define CRYPTODEV_NAME_NULL_PMD cryptodev_null_pmd
/**< Null crypto PMD device name */
-#define CRYPTODEV_NAME_AESNI_MB_PMD ("cryptodev_aesni_mb_pmd")
+#define CRYPTODEV_NAME_AESNI_MB_PMD cryptodev_aesni_mb_pmd
/**< AES-NI Multi buffer PMD device name */
-#define CRYPTODEV_NAME_QAT_SYM_PMD ("cryptodev_qat_sym_pmd")
+#define CRYPTODEV_NAME_AESNI_GCM_PMD cryptodev_aesni_gcm_pmd
+/**< AES-NI GCM PMD device name */
+#define CRYPTODEV_NAME_QAT_SYM_PMD cryptodev_qat_sym_pmd
/**< Intel QAT Symmetric Crypto PMD device name */
+#define CRYPTODEV_NAME_SNOW3G_PMD cryptodev_snow3g_pmd
+/**< SNOW 3G PMD device name */
+#define CRYPTODEV_NAME_KASUMI_PMD cryptodev_kasumi_pmd
+/**< KASUMI PMD device name */
/** Crypto device type */
enum rte_cryptodev_type {
RTE_CRYPTODEV_NULL_PMD = 1, /**< Null crypto PMD */
+ RTE_CRYPTODEV_AESNI_GCM_PMD, /**< AES-NI GCM PMD */
RTE_CRYPTODEV_AESNI_MB_PMD, /**< AES-NI multi buffer PMD */
RTE_CRYPTODEV_QAT_SYM_PMD, /**< QAT PMD Symmetric Crypto */
+ RTE_CRYPTODEV_SNOW3G_PMD, /**< SNOW 3G PMD */
+ RTE_CRYPTODEV_KASUMI_PMD, /**< KASUMI PMD */
};
-
extern const char **rte_cyptodev_names;
/* Logging Macros */
#define CDEV_PMD_TRACE(fmt, args...)
#endif
+/**
+ * Symmetric Crypto Capability
+ */
+struct rte_cryptodev_symmetric_capability {
+ enum rte_crypto_sym_xform_type xform_type;
+ /**< Transform type : Authentication / Cipher */
+ RTE_STD_C11
+ union {
+ struct {
+ enum rte_crypto_auth_algorithm algo;
+ /**< authentication algorithm */
+ uint16_t block_size;
+ /**< algorithm block size */
+ struct {
+ uint16_t min; /**< minimum key size */
+ uint16_t max; /**< maximum key size */
+ uint16_t increment;
+ /**< if a range of sizes are supported,
+ * this parameter is used to indicate
+ * increments in byte size that are supported
+ * between the minimum and maximum */
+ } key_size;
+ /**< auth key size range */
+ struct {
+ uint16_t min; /**< minimum digest size */
+ uint16_t max; /**< maximum digest size */
+ uint16_t increment;
+ /**< if a range of sizes are supported,
+ * this parameter is used to indicate
+ * increments in byte size that are supported
+ * between the minimum and maximum */
+ } digest_size;
+ /**< digest size range */
+ struct {
+ uint16_t min; /**< minimum aad size */
+ uint16_t max; /**< maximum aad size */
+ uint16_t increment;
+ /**< if a range of sizes are supported,
+ * this parameter is used to indicate
+ * increments in byte size that are supported
+ * between the minimum and maximum */
+ } aad_size;
+ /**< Additional authentication data size range */
+ } auth;
+ /**< Symmetric Authentication transform capabilities */
+ struct {
+ enum rte_crypto_cipher_algorithm algo;
+ /**< cipher algorithm */
+ uint16_t block_size;
+ /**< algorithm block size */
+ struct {
+ uint16_t min; /**< minimum key size */
+ uint16_t max; /**< maximum key size */
+ uint16_t increment;
+ /**< if a range of sizes are supported,
+ * this parameter is used to indicate
+ * increments in byte size that are supported
+ * between the minimum and maximum */
+ } key_size;
+ /**< cipher key size range */
+ struct {
+ uint16_t min; /**< minimum iv size */
+ uint16_t max; /**< maximum iv size */
+ uint16_t increment;
+ /**< if a range of sizes are supported,
+ * this parameter is used to indicate
+ * increments in byte size that are supported
+ * between the minimum and maximum */
+ } iv_size;
+ /**< Initialisation vector data size range */
+ } cipher;
+ /**< Symmetric Cipher transform capabilities */
+ };
+};
+
+/** Structure used to capture a capability of a crypto device */
+struct rte_cryptodev_capabilities {
+ enum rte_crypto_op_type op;
+ /**< Operation type */
+
+ RTE_STD_C11
+ union {
+ struct rte_cryptodev_symmetric_capability sym;
+ /**< Symmetric operation capability parameters */
+ };
+};
+
+/** Macro used at end of crypto PMD list */
+#define RTE_CRYPTODEV_END_OF_CAPABILITIES_LIST() \
+ { RTE_CRYPTO_OP_TYPE_UNDEFINED }
+
+
+/**
+ * Crypto device supported feature flags
+ *
+ * Note:
+ * New features flags should be added to the end of the list
+ *
+ * Keep these flags synchronised with rte_cryptodev_get_feature_name()
+ */
+#define RTE_CRYPTODEV_FF_SYMMETRIC_CRYPTO (1ULL << 0)
+/**< Symmetric crypto operations are supported */
+#define RTE_CRYPTODEV_FF_ASYMMETRIC_CRYPTO (1ULL << 1)
+/**< Asymmetric crypto operations are supported */
+#define RTE_CRYPTODEV_FF_SYM_OPERATION_CHAINING (1ULL << 2)
+/**< Chaining symmetric crypto operations are supported */
+#define RTE_CRYPTODEV_FF_CPU_SSE (1ULL << 3)
+/**< Utilises CPU SIMD SSE instructions */
+#define RTE_CRYPTODEV_FF_CPU_AVX (1ULL << 4)
+/**< Utilises CPU SIMD AVX instructions */
+#define RTE_CRYPTODEV_FF_CPU_AVX2 (1ULL << 5)
+/**< Utilises CPU SIMD AVX2 instructions */
+#define RTE_CRYPTODEV_FF_CPU_AESNI (1ULL << 6)
+/**< Utilises CPU AES-NI instructions */
+#define RTE_CRYPTODEV_FF_HW_ACCELERATED (1ULL << 7)
+/**< Operations are off-loaded to an external hardware accelerator */
+
+
+/**
+ * Get the name of a crypto device feature flag
+ *
+ * @param flag The mask describing the flag.
+ *
+ * @return
+ * The name of this flag, or NULL if it's not a valid feature flag.
+ */
+
+extern const char *
+rte_cryptodev_get_feature_name(uint64_t flag);
+
/** Crypto device information */
struct rte_cryptodev_info {
const char *driver_name; /**< Driver name. */
enum rte_cryptodev_type dev_type; /**< Device type */
struct rte_pci_device *pci_dev; /**< PCI information. */
+ uint64_t feature_flags; /**< Feature flags */
+
+ const struct rte_cryptodev_capabilities *capabilities;
+ /**< Array of devices supported capabilities */
+
unsigned max_nb_queue_pairs;
/**< Maximum number of queues pairs supported by device. */
/**< Total error count on operations dequeued */
};
+#define RTE_CRYPTODEV_VDEV_DEFAULT_MAX_NB_QUEUE_PAIRS 8
+#define RTE_CRYPTODEV_VDEV_DEFAULT_MAX_NB_SESSIONS 2048
+
+/**
+ * @internal
+ * Initialisation parameters for virtual crypto devices
+ */
+struct rte_crypto_vdev_init_params {
+ unsigned max_nb_queue_pairs;
+ unsigned max_nb_sessions;
+ uint8_t socket_id;
+};
+
+/**
+ * Parse virtual device initialisation parameters input arguments
+ * @internal
+ *
+ * @params params Initialisation parameters with defaults set.
+ * @params input_args Command line arguments
+ *
+ * @return
+ * 0 on successful parse
+ * <0 on failure to parse
+ */
+int
+rte_cryptodev_parse_vdev_init_params(
+ struct rte_crypto_vdev_init_params *params,
+ const char *input_args);
/**
* Create a virtual crypto device
/**< Enqueue packets for processing on queue pair of a device. */
+
+
struct rte_cryptodev_callback;
/** Structure to keep track of registered callbacks */
/**< Pointer to device data */
struct rte_cryptodev_ops *dev_ops;
/**< Functions exported by PMD */
+ uint64_t feature_flags;
+ /**< Supported features */
struct rte_pci_device *pci_dev;
/**< PCI info. supplied by probing */
struct rte_cryptodev_cb_list link_intr_cbs;
/**< User application callback for interrupts if present */
+ __extension__
uint8_t attached : 1;
/**< Flag indicating the device is attached */
} __rte_cache_aligned;
char name[RTE_CRYPTODEV_NAME_MAX_LEN];
/**< Unique identifier name */
+ __extension__
uint8_t dev_started : 1;
/**< Device state: STARTED(1)/STOPPED(0) */
/** Cryptodev symmetric crypto session */
struct rte_cryptodev_sym_session {
+ RTE_STD_C11
struct {
uint8_t dev_id;
/**< Device Id */
- enum rte_cryptodev_type type;
+ enum rte_cryptodev_type dev_type;
/** Crypto Device type session created on */
struct rte_mempool *mp;
/**< Mempool session allocated from */
} __rte_aligned(8);
/**< Public symmetric session details */
- char _private[0];
+ char _private[];
/**< Private session material */
};
git.droids-corp.org / dpdk.git / blobdiff