extern "C" {
#endif
+#include <stdio.h>
#include <sys/queue.h>
-/** Double linked list of device drivers. */
-TAILQ_HEAD(rte_driver_list, rte_driver);
+#include <rte_config.h>
+#include <rte_log.h>
-/**
- * Initialization function called for each device driver once.
- */
-typedef int (rte_dev_init_t)(const char *name, const char *args);
+__attribute__((format(printf, 2, 0)))
+static inline void
+rte_pmd_debug_trace(const char *func_name, const char *fmt, ...)
+{
+ va_list ap;
-/**
- * Driver type enumeration
+ va_start(ap, fmt);
+
+ char buffer[vsnprintf(NULL, 0, fmt, ap) + 1];
+
+ va_end(ap);
+
+ va_start(ap, fmt);
+ vsnprintf(buffer, sizeof(buffer), fmt, ap);
+ va_end(ap);
+
+ rte_log(RTE_LOG_ERR, RTE_LOGTYPE_PMD, "%s: %s", func_name, buffer);
+}
+
+/*
+ * Enable RTE_PMD_DEBUG_TRACE() when at least one component relying on the
+ * RTE_*_RET() macros defined below is compiled in debug mode.
*/
-enum pmd_type {
- PMD_VDEV = 0,
- PMD_PDEV = 1,
- PMD_BDEV = 2, /**< Poll Mode Driver Bonded Device*/
-};
+#if defined(RTE_LIBRTE_ETHDEV_DEBUG) || \
+ defined(RTE_LIBRTE_CRYPTODEV_DEBUG) || \
+ defined(RTE_LIBRTE_EVENTDEV_DEBUG)
+#define RTE_PMD_DEBUG_TRACE(...) \
+ rte_pmd_debug_trace(__func__, __VA_ARGS__)
+#else
+#define RTE_PMD_DEBUG_TRACE(...) (void)0
+#endif
+
+/* Macros for checking for restricting functions to primary instance only */
+#define RTE_PROC_PRIMARY_OR_ERR_RET(retval) do { \
+ if (rte_eal_process_type() != RTE_PROC_PRIMARY) { \
+ RTE_PMD_DEBUG_TRACE("Cannot run in secondary processes\n"); \
+ return retval; \
+ } \
+} while (0)
+
+#define RTE_PROC_PRIMARY_OR_RET() do { \
+ if (rte_eal_process_type() != RTE_PROC_PRIMARY) { \
+ RTE_PMD_DEBUG_TRACE("Cannot run in secondary processes\n"); \
+ return; \
+ } \
+} while (0)
+
+/* Macros to check for invalid function pointers */
+#define RTE_FUNC_PTR_OR_ERR_RET(func, retval) do { \
+ if ((func) == NULL) { \
+ RTE_PMD_DEBUG_TRACE("Function not supported\n"); \
+ return retval; \
+ } \
+} while (0)
-#define PMD_BOND_NAME "eth_bond"
+#define RTE_FUNC_PTR_OR_RET(func) do { \
+ if ((func) == NULL) { \
+ RTE_PMD_DEBUG_TRACE("Function not supported\n"); \
+ return; \
+ } \
+} while (0)
/**
- * Driver initialization */
-enum pmd_init_priority {
- PMD_INIT_PRE_PCI_PROBE = 0,
- PMD_INIT_POST_PCI_PROBE = 1,
+ * A generic memory resource representation.
+ */
+struct rte_mem_resource {
+ uint64_t phys_addr; /**< Physical address, 0 if not resource. */
+ uint64_t len; /**< Length of the resource. */
+ void *addr; /**< Virtual address, NULL when not mapped. */
};
/**
*/
struct rte_driver {
TAILQ_ENTRY(rte_driver) next; /**< Next in list. */
- enum pmd_type type; /**< PMD Driver type */
const char *name; /**< Driver name. */
- rte_dev_init_t *init; /**< Device init. function. */
+ const char *alias; /**< Driver alias. */
};
/**
- * Register a device driver.
+ * A structure describing a generic device.
+ */
+struct rte_device {
+ TAILQ_ENTRY(rte_device) next; /**< Next device */
+ const char *name; /**< Device name */
+ const struct rte_driver *driver;/**< Associated driver */
+ int numa_node; /**< NUMA node connection */
+ struct rte_devargs *devargs; /**< Device user arguments */
+};
+
+/**
+ * Initialize a driver specified by name.
*
- * @param driver
- * A pointer to a rte_dev structure describing the driver
- * to be registered.
+ * @param name
+ * The pointer to a driver name to be initialized.
+ * @param args
+ * The pointer to arguments used by driver initialization.
+ * @return
+ * 0 on success, negative on error
*/
-void rte_eal_driver_register(struct rte_driver *driver);
+int rte_vdev_init(const char *name, const char *args);
/**
- * Unregister a device driver.
+ * Uninitalize a driver specified by name.
*
- * @param driver
- * A pointer to a rte_dev structure describing the driver
- * to be unregistered.
+ * @param name
+ * The pointer to a driver name to be initialized.
+ * @return
+ * 0 on success, negative on error
*/
-void rte_eal_driver_unregister(struct rte_driver *driver);
+int rte_vdev_uninit(const char *name);
/**
- * Initialize all the registered drivers in this process
+ * Attach a device to a registered driver.
+ *
+ * @param name
+ * The device name, that refers to a pci device (or some private
+ * way of designating a vdev device). Based on this device name, eal
+ * will identify a driver capable of handling it and pass it to the
+ * driver probing function.
+ * @param devargs
+ * Device arguments to be passed to the driver.
+ * @return
+ * 0 on success, negative on error.
*/
-int rte_eal_dev_init(uint8_t init_priority);
+int rte_eal_dev_attach(const char *name, const char *devargs);
-#define PMD_REGISTER_DRIVER(d)\
-void devinitfn_ ##d(void);\
-void __attribute__((constructor, used)) devinitfn_ ##d(void)\
-{\
- rte_eal_driver_register(&d);\
-}
+/**
+ * Detach a device from its driver.
+ *
+ * @param name
+ * Same description as for rte_eal_dev_attach().
+ * Here, eal will call the driver detaching function.
+ * @return
+ * 0 on success, negative on error.
+ */
+int rte_eal_dev_detach(const char *name);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice
+ *
+ * Hotplug add a given device to a specific bus.
+ *
+ * @param busname
+ * The bus name the device is added to.
+ * @param devname
+ * The device name. Based on this device name, eal will identify a driver
+ * capable of handling it and pass it to the driver probing function.
+ * @param devargs
+ * Device arguments to be passed to the driver.
+ * @return
+ * 0 on success, negative on error.
+ */
+int rte_eal_hotplug_add(const char *busname, const char *devname,
+ const char *devargs);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice
+ *
+ * Hotplug remove a given device from a specific bus.
+ *
+ * @param busname
+ * The bus name the device is removed from.
+ * @param devname
+ * The device name being removed.
+ * @return
+ * 0 on success, negative on error.
+ */
+int rte_eal_hotplug_remove(const char *busname, const char *devname);
+
+/**
+ * Device comparison function.
+ *
+ * This type of function is used to compare an rte_device with arbitrary
+ * data.
+ *
+ * @param dev
+ * Device handle.
+ *
+ * @param data
+ * Data to compare against. The type of this parameter is determined by
+ * the kind of comparison performed by the function.
+ *
+ * @return
+ * 0 if the device matches the data.
+ * !0 if the device does not match.
+ * <0 if ordering is possible and the device is lower than the data.
+ * >0 if ordering is possible and the device is greater than the data.
+ */
+typedef int (*rte_dev_cmp_t)(const struct rte_device *dev, const void *data);
+
+#define RTE_PMD_EXPORT_NAME_ARRAY(n, idx) n##idx[]
+
+#define RTE_PMD_EXPORT_NAME(name, idx) \
+static const char RTE_PMD_EXPORT_NAME_ARRAY(this_pmd_name, idx) \
+__attribute__((used)) = RTE_STR(name)
+
+#define DRV_EXP_TAG(name, tag) __##name##_##tag
+
+#define RTE_PMD_REGISTER_PCI_TABLE(name, table) \
+static const char DRV_EXP_TAG(name, pci_tbl_export)[] __attribute__((used)) = \
+RTE_STR(table)
+
+#define RTE_PMD_REGISTER_PARAM_STRING(name, str) \
+static const char DRV_EXP_TAG(name, param_string_export)[] \
+__attribute__((used)) = str
+
+/**
+ * Advertise the list of kernel modules required to run this driver
+ *
+ * This string lists the kernel modules required for the devices
+ * associated to a PMD. The format of each line of the string is:
+ * "<device-pattern> <kmod-expression>".
+ *
+ * The possible formats for the device pattern are:
+ * "*" all devices supported by this driver
+ * "pci:*" all PCI devices supported by this driver
+ * "pci:v8086:d*:sv*:sd*" all PCI devices supported by this driver
+ * whose vendor id is 0x8086.
+ *
+ * The format of the kernel modules list is a parenthesed expression
+ * containing logical-and (&) and logical-or (|).
+ *
+ * The device pattern and the kmod expression are separated by a space.
+ *
+ * Example:
+ * - "* igb_uio | uio_pci_generic | vfio"
+ */
+#define RTE_PMD_REGISTER_KMOD_DEP(name, str) \
+static const char DRV_EXP_TAG(name, kmod_dep_export)[] \
+__attribute__((used)) = str
#ifdef __cplusplus
}