-/*-
- * BSD LICENSE
- *
- * Copyright(c) 2014 6WIND S.A.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of 6WIND S.A. nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2014 6WIND S.A.
*/
#ifndef _RTE_DEV_H_
#include <stdio.h>
#include <sys/queue.h>
+#include <rte_config.h>
+#include <rte_compat.h>
#include <rte_log.h>
+/**
+ * The device event type.
+ */
+enum rte_dev_event_type {
+ RTE_DEV_EVENT_ADD, /**< device being added */
+ RTE_DEV_EVENT_REMOVE, /**< device being removed */
+ RTE_DEV_EVENT_MAX /**< max value of this enum */
+};
+
+struct rte_dev_event {
+ enum rte_dev_event_type type; /**< device event type */
+ int subsystem; /**< subsystem id */
+ char *devname; /**< device name */
+};
+
+typedef void (*rte_dev_event_cb_fn)(const char *device_name,
+ enum rte_dev_event_type event,
+ void *cb_arg);
+
__attribute__((format(printf, 2, 0)))
static inline void
rte_pmd_debug_trace(const char *func_name, const char *fmt, ...)
va_start(ap, fmt);
- char buffer[vsnprintf(NULL, 0, fmt, ap) + 1];
+ {
+ char buffer[vsnprintf(NULL, 0, fmt, ap) + 1];
- va_end(ap);
+ va_end(ap);
- va_start(ap, fmt);
- vsnprintf(buffer, sizeof(buffer), fmt, ap);
- va_end(ap);
+ va_start(ap, fmt);
+ vsnprintf(buffer, sizeof(buffer), fmt, ap);
+ va_end(ap);
- rte_log(RTE_LOG_ERR, RTE_LOGTYPE_PMD, "%s: %s", func_name, buffer);
+ rte_log(RTE_LOG_ERR, RTE_LOGTYPE_PMD, "%s: %s",
+ func_name, buffer);
+ }
}
+/*
+ * Enable RTE_PMD_DEBUG_TRACE() when at least one component relying on the
+ * RTE_*_RET() macros defined below is compiled in debug mode.
+ */
+#if defined(RTE_LIBRTE_EVENTDEV_DEBUG)
+#define RTE_PMD_DEBUG_TRACE(...) \
+ rte_pmd_debug_trace(__func__, __VA_ARGS__)
+#else
+#define RTE_PMD_DEBUG_TRACE(...) (void)0
+#endif
+
/* Macros for checking for restricting functions to primary instance only */
#define RTE_PROC_PRIMARY_OR_ERR_RET(retval) do { \
if (rte_eal_process_type() != RTE_PROC_PRIMARY) { \
} \
} while (0)
-
-/** Double linked list of device drivers. */
-TAILQ_HEAD(rte_driver_list, rte_driver);
-
/**
- * Initialization function called for each device driver once.
+ * Device driver.
*/
-typedef int (rte_dev_init_t)(const char *name, const char *args);
+enum rte_kernel_driver {
+ RTE_KDRV_UNKNOWN = 0,
+ RTE_KDRV_IGB_UIO,
+ RTE_KDRV_VFIO,
+ RTE_KDRV_UIO_GENERIC,
+ RTE_KDRV_NIC_UIO,
+ RTE_KDRV_NONE,
+};
/**
- * Uninitilization function called for each device driver once.
+ * Device policies.
*/
-typedef int (rte_dev_uninit_t)(const char *name);
+enum rte_dev_policy {
+ RTE_DEV_WHITELISTED,
+ RTE_DEV_BLACKLISTED,
+};
/**
- * Driver type enumeration
+ * A generic memory resource representation.
*/
-enum pmd_type {
- PMD_VDEV = 0,
- PMD_PDEV = 1,
+struct rte_mem_resource {
+ uint64_t phys_addr; /**< Physical address, 0 if not resource. */
+ uint64_t len; /**< Length of the resource. */
+ void *addr; /**< Virtual address, NULL when not mapped. */
};
/**
*/
struct rte_driver {
TAILQ_ENTRY(rte_driver) next; /**< Next in list. */
- enum pmd_type type; /**< PMD Driver type */
const char *name; /**< Driver name. */
- rte_dev_init_t *init; /**< Device init. function. */
- rte_dev_uninit_t *uninit; /**< Device uninit. function. */
+ const char *alias; /**< Driver alias. */
+};
+
+/*
+ * Internal identifier length
+ * Sufficiently large to allow for UUID or PCI address
+ */
+#define RTE_DEV_NAME_MAX_LEN 64
+
+/**
+ * A structure describing a generic device.
+ */
+struct rte_device {
+ TAILQ_ENTRY(rte_device) next; /**< Next device */
+ const char *name; /**< Device name */
+ const struct rte_driver *driver; /**< Driver assigned after probing */
+ const struct rte_bus *bus; /**< Bus handle assigned on scan */
+ int numa_node; /**< NUMA node connection */
+ struct rte_devargs *devargs; /**< Arguments for latest probing */
};
/**
- * Register a device driver.
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice
+ *
+ * Query status of a device.
*
- * @param driver
- * A pointer to a rte_dev structure describing the driver
- * to be registered.
+ * @param dev
+ * Generic device pointer.
+ * @return
+ * (int)true if already probed successfully, 0 otherwise.
*/
-void rte_eal_driver_register(struct rte_driver *driver);
+__rte_experimental
+int rte_dev_is_probed(const struct rte_device *dev);
/**
- * Unregister a device driver.
+ * Hotplug add a given device to a specific bus.
+ *
+ * In multi-process, it will request other processes to add the same device.
+ * A failure, in any process, will rollback the action
*
- * @param driver
- * A pointer to a rte_dev structure describing the driver
- * to be unregistered.
+ * @param busname
+ * The bus name the device is added to.
+ * @param devname
+ * The device name. Based on this device name, eal will identify a driver
+ * capable of handling it and pass it to the driver probing function.
+ * @param drvargs
+ * Device arguments to be passed to the driver.
+ * @return
+ * 0 on success, negative on error.
*/
-void rte_eal_driver_unregister(struct rte_driver *driver);
+int rte_eal_hotplug_add(const char *busname, const char *devname,
+ const char *drvargs);
/**
- * Initalize all the registered drivers in this process
+ * Add matching devices.
+ *
+ * In multi-process, it will request other processes to add the same device.
+ * A failure, in any process, will rollback the action
+ *
+ * @param devargs
+ * Device arguments including bus, class and driver properties.
+ * @return
+ * 0 on success, negative on error.
*/
-int rte_eal_dev_init(void);
+int rte_dev_probe(const char *devargs);
/**
- * Initialize a driver specified by name.
+ * Hotplug remove a given device from a specific bus.
*
- * @param name
- * The pointer to a driver name to be initialized.
- * @param args
- * The pointer to arguments used by driver initialization.
+ * In multi-process, it will request other processes to remove the same device.
+ * A failure, in any process, will rollback the action
+ *
+ * @param busname
+ * The bus name the device is removed from.
+ * @param devname
+ * The device name being removed.
* @return
- * 0 on success, negative on error
+ * 0 on success, negative on error.
*/
-int rte_eal_vdev_init(const char *name, const char *args);
+int rte_eal_hotplug_remove(const char *busname, const char *devname);
/**
- * Uninitalize a driver specified by name.
+ * Remove one device.
+ *
+ * In multi-process, it will request other processes to remove the same device.
+ * A failure, in any process, will rollback the action
*
- * @param name
- * The pointer to a driver name to be initialized.
+ * @param dev
+ * Data structure of the device to remove.
* @return
- * 0 on success, negative on error
+ * 0 on success, negative on error.
*/
-int rte_eal_vdev_uninit(const char *name);
+int rte_dev_remove(struct rte_device *dev);
-#define DRIVER_EXPORT_NAME_ARRAY(n, idx) n##idx[]
+/**
+ * Device comparison function.
+ *
+ * This type of function is used to compare an rte_device with arbitrary
+ * data.
+ *
+ * @param dev
+ * Device handle.
+ *
+ * @param data
+ * Data to compare against. The type of this parameter is determined by
+ * the kind of comparison performed by the function.
+ *
+ * @return
+ * 0 if the device matches the data.
+ * !0 if the device does not match.
+ * <0 if ordering is possible and the device is lower than the data.
+ * >0 if ordering is possible and the device is greater than the data.
+ */
+typedef int (*rte_dev_cmp_t)(const struct rte_device *dev, const void *data);
-#define DRIVER_EXPORT_NAME(name, idx) \
-static const char DRIVER_EXPORT_NAME_ARRAY(this_pmd_name, idx) \
-__attribute__((used)) = RTE_STR(name)
+#define RTE_PMD_EXPORT_NAME_ARRAY(n, idx) n##idx[]
-#define PMD_REGISTER_DRIVER(drv, nm)\
-RTE_INIT(probefn_ ##drv);\
-static void probefn_ ##drv(void)\
-{\
- (drv).name = RTE_STR(nm);\
- rte_eal_driver_register(&drv);\
-} \
-DRIVER_EXPORT_NAME(nm, __COUNTER__)
+#define RTE_PMD_EXPORT_NAME(name, idx) \
+static const char RTE_PMD_EXPORT_NAME_ARRAY(this_pmd_name, idx) \
+__attribute__((used)) = RTE_STR(name)
#define DRV_EXP_TAG(name, tag) __##name##_##tag
-#define DRIVER_REGISTER_PCI_TABLE(name, table) \
+#define RTE_PMD_REGISTER_PCI_TABLE(name, table) \
static const char DRV_EXP_TAG(name, pci_tbl_export)[] __attribute__((used)) = \
RTE_STR(table)
-#define DRIVER_REGISTER_PARAM_STRING(name, str) \
+#define RTE_PMD_REGISTER_PARAM_STRING(name, str) \
static const char DRV_EXP_TAG(name, param_string_export)[] \
__attribute__((used)) = str
+/**
+ * Advertise the list of kernel modules required to run this driver
+ *
+ * This string lists the kernel modules required for the devices
+ * associated to a PMD. The format of each line of the string is:
+ * "<device-pattern> <kmod-expression>".
+ *
+ * The possible formats for the device pattern are:
+ * "*" all devices supported by this driver
+ * "pci:*" all PCI devices supported by this driver
+ * "pci:v8086:d*:sv*:sd*" all PCI devices supported by this driver
+ * whose vendor id is 0x8086.
+ *
+ * The format of the kernel modules list is a parenthesed expression
+ * containing logical-and (&) and logical-or (|).
+ *
+ * The device pattern and the kmod expression are separated by a space.
+ *
+ * Example:
+ * - "* igb_uio | uio_pci_generic | vfio"
+ */
+#define RTE_PMD_REGISTER_KMOD_DEP(name, str) \
+static const char DRV_EXP_TAG(name, kmod_dep_export)[] \
+__attribute__((used)) = str
+
+/**
+ * Iteration context.
+ *
+ * This context carries over the current iteration state.
+ */
+struct rte_dev_iterator {
+ const char *dev_str; /**< device string. */
+ const char *bus_str; /**< bus-related part of device string. */
+ const char *cls_str; /**< class-related part of device string. */
+ struct rte_bus *bus; /**< bus handle. */
+ struct rte_class *cls; /**< class handle. */
+ struct rte_device *device; /**< current position. */
+ void *class_device; /**< additional specialized context. */
+};
+
+/**
+ * Device iteration function.
+ *
+ * Find the next device matching properties passed in parameters.
+ * The function takes an additional ``start`` parameter, that is
+ * used as starting context when relevant.
+ *
+ * The function returns the current element in the iteration.
+ * This return value will potentially be used as a start parameter
+ * in subsequent calls to the function.
+ *
+ * The additional iterator parameter is only there if a specific
+ * implementation needs additional context. It must not be modified by
+ * the iteration function itself.
+ *
+ * @param start
+ * Starting iteration context.
+ *
+ * @param devstr
+ * Device description string.
+ *
+ * @param it
+ * Device iterator.
+ *
+ * @return
+ * The address of the current element matching the device description
+ * string.
+ */
+typedef void *(*rte_dev_iterate_t)(const void *start,
+ const char *devstr,
+ const struct rte_dev_iterator *it);
+
+/**
+ * Initializes a device iterator.
+ *
+ * This iterator allows accessing a list of devices matching a criteria.
+ * The device matching is made among all buses and classes currently registered,
+ * filtered by the device description given as parameter.
+ *
+ * This function will not allocate any memory. It is safe to stop the
+ * iteration at any moment and let the iterator go out of context.
+ *
+ * @param it
+ * Device iterator handle.
+ *
+ * @param str
+ * Device description string.
+ *
+ * @return
+ * 0 on successful initialization.
+ * <0 on error.
+ */
+__rte_experimental
+int
+rte_dev_iterator_init(struct rte_dev_iterator *it, const char *str);
+
+/**
+ * Iterates on a device iterator.
+ *
+ * Generates a new rte_device handle corresponding to the next element
+ * in the list described in comprehension by the iterator.
+ *
+ * The next object is returned, and the iterator is updated.
+ *
+ * @param it
+ * Device iterator handle.
+ *
+ * @return
+ * An rte_device handle if found.
+ * NULL if an error occurred (rte_errno is set).
+ * NULL if no device could be found (rte_errno is not set).
+ */
+__rte_experimental
+struct rte_device *
+rte_dev_iterator_next(struct rte_dev_iterator *it);
+
+#define RTE_DEV_FOREACH(dev, devstr, it) \
+ for (rte_dev_iterator_init(it, devstr), \
+ dev = rte_dev_iterator_next(it); \
+ dev != NULL; \
+ dev = rte_dev_iterator_next(it))
+
#ifdef __cplusplus
}
#endif
-#endif /* _RTE_VDEV_H_ */
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice
+ *
+ * It registers the callback for the specific device.
+ * Multiple callbacks cal be registered at the same time.
+ *
+ * @param device_name
+ * The device name, that is the param name of the struct rte_device,
+ * null value means for all devices.
+ * @param cb_fn
+ * callback address.
+ * @param cb_arg
+ * address of parameter for callback.
+ *
+ * @return
+ * - On success, zero.
+ * - On failure, a negative value.
+ */
+int __rte_experimental
+rte_dev_event_callback_register(const char *device_name,
+ rte_dev_event_cb_fn cb_fn,
+ void *cb_arg);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice
+ *
+ * It unregisters the callback according to the specified device.
+ *
+ * @param device_name
+ * The device name, that is the param name of the struct rte_device,
+ * null value means for all devices and their callbacks.
+ * @param cb_fn
+ * callback address.
+ * @param cb_arg
+ * address of parameter for callback, (void *)-1 means to remove all
+ * registered which has the same callback address.
+ *
+ * @return
+ * - On success, return the number of callback entities removed.
+ * - On failure, a negative value.
+ */
+int __rte_experimental
+rte_dev_event_callback_unregister(const char *device_name,
+ rte_dev_event_cb_fn cb_fn,
+ void *cb_arg);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice
+ *
+ * Executes all the user application registered callbacks for
+ * the specific device.
+ *
+ * @param device_name
+ * The device name.
+ * @param event
+ * the device event type.
+ */
+void __rte_experimental
+rte_dev_event_callback_process(const char *device_name,
+ enum rte_dev_event_type event);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice
+ *
+ * Start the device event monitoring.
+ *
+ * @return
+ * - On success, zero.
+ * - On failure, a negative value.
+ */
+int __rte_experimental
+rte_dev_event_monitor_start(void);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice
+ *
+ * Stop the device event monitoring.
+ *
+ * @return
+ * - On success, zero.
+ * - On failure, a negative value.
+ */
+int __rte_experimental
+rte_dev_event_monitor_stop(void);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice
+ *
+ * Enable hotplug handling for devices.
+ *
+ * @return
+ * - On success, zero.
+ * - On failure, a negative value.
+ */
+int __rte_experimental
+rte_dev_hotplug_handle_enable(void);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice
+ *
+ * Disable hotplug handling for devices.
+ *
+ * @return
+ * - On success, zero.
+ * - On failure, a negative value.
+ */
+int __rte_experimental
+rte_dev_hotplug_handle_disable(void);
+
+#endif /* _RTE_DEV_H_ */