/*-
* BSD LICENSE
*
- * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * Copyright(c) 2010-2015 Intel Corporation. All rights reserved.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
extern struct pci_device_list pci_device_list; /**< Global list of PCI devices. */
/** Pathname of PCI devices directory. */
-#define SYSFS_PCI_DEVICES "/sys/bus/pci/devices"
+const char *pci_get_sysfs_path(void);
/** Formatting string for PCI device identifier: Ex: 0000:00:01.0 */
#define PCI_PRI_FMT "%.4" PRIx16 ":%.2" PRIx8 ":%.2" PRIx8 ".%" PRIx8
/** Nb. of values in PCI resource format. */
#define PCI_RESOURCE_FMT_NVAL 3
-/** IO resource type: memory address space */
-#define IORESOURCE_MEM 0x00000200
-
/**
* A structure describing a PCI resource.
*/
* table of these IDs for each device that it supports.
*/
struct rte_pci_id {
+ uint32_t class_id; /**< Class ID (class, subclass, pi) or RTE_CLASS_ANY_ID. */
uint16_t vendor_id; /**< Vendor ID or PCI_ANY_ID. */
uint16_t device_id; /**< Device ID or PCI_ANY_ID. */
uint16_t subsystem_vendor_id; /**< Subsystem vendor ID or PCI_ANY_ID. */
RTE_KDRV_VFIO,
RTE_KDRV_UIO_GENERIC,
RTE_KDRV_NIC_UIO,
+ RTE_KDRV_NONE,
};
/**
/** Any PCI device identifier (vendor, device, ...) */
#define PCI_ANY_ID (0xffff)
+#define RTE_CLASS_ANY_ID (0xffffff)
#ifdef __cplusplus
/** C++ macro used to help building up tables of device IDs */
#define RTE_PCI_DEVICE(vend, dev) \
+ RTE_CLASS_ANY_ID, \
(vend), \
(dev), \
PCI_ANY_ID, \
#else
/** Macro used to help building up tables of device IDs */
#define RTE_PCI_DEVICE(vend, dev) \
+ .class_id = RTE_CLASS_ANY_ID, \
.vendor_id = (vend), \
.device_id = (dev), \
.subsystem_vendor_id = PCI_ANY_ID, \
/**
* Initialisation function for the driver called during PCI probing.
*/
-typedef int (pci_devinit_t)(struct rte_pci_driver *, struct rte_pci_device *);
+typedef int (pci_probe_t)(struct rte_pci_driver *, struct rte_pci_device *);
/**
* Uninitialisation function for the driver called during hotplugging.
*/
-typedef int (pci_devuninit_t)(struct rte_pci_device *);
+typedef int (pci_remove_t)(struct rte_pci_device *);
/**
* A structure describing a PCI driver.
struct rte_pci_driver {
TAILQ_ENTRY(rte_pci_driver) next; /**< Next in list. */
const char *name; /**< Driver name. */
- pci_devinit_t *devinit; /**< Device init. function. */
- pci_devuninit_t *devuninit; /**< Device uninit function. */
+ pci_probe_t *probe; /**< Device Probe function. */
+ pci_remove_t *remove; /**< Device Remove function. */
const struct rte_pci_id *id_table; /**< ID table, NULL terminated. */
uint32_t drv_flags; /**< Flags contolling handling of device. */
};
/** Device needs PCI BAR mapping (done with either IGB_UIO or VFIO) */
#define RTE_PCI_DRV_NEED_MAPPING 0x0001
-/** Device driver must be registered several times until failure - deprecated */
-#pragma GCC poison RTE_PCI_DRV_MULTIPLE
/** Device needs to be unbound even if no module is provided */
#define RTE_PCI_DRV_FORCE_UNBIND 0x0004
/** Device driver supports link state interrupt */
*/
int rte_eal_pci_probe(void);
+/**
+ * Map the PCI device resources in user space virtual memory address
+ *
+ * Note that driver should not call this function when flag
+ * RTE_PCI_DRV_NEED_MAPPING is set, as EAL will do that for
+ * you when it's on.
+ *
+ * @param dev
+ * A pointer to a rte_pci_device structure describing the device
+ * to use
+ *
+ * @return
+ * 0 on success, negative on error and positive if no driver
+ * is found for the device.
+ */
+int rte_eal_pci_map_device(struct rte_pci_device *dev);
+
+/**
+ * Unmap this device
+ *
+ * @param dev
+ * A pointer to a rte_pci_device structure describing the device
+ * to use
+ */
+void rte_eal_pci_unmap_device(struct rte_pci_device *dev);
+
/**
* @internal
* Map a particular resource from a file.
* Close the single PCI device.
*
* Scan the content of the PCI bus, and find the pci device specified by pci
- * address, then call the devuninit() function for registered driver that has a
+ * address, then call the remove() function for registered driver that has a
* matching entry in its id_table for discovered device.
*
* @param addr
*/
void rte_eal_pci_register(struct rte_pci_driver *driver);
+/** Helper for PCI device registration from driver (eth, crypto) instance */
+#define DRIVER_REGISTER_PCI(nm, pci_drv) \
+RTE_INIT(pciinitfn_ ##nm); \
+static void pciinitfn_ ##nm(void) \
+{\
+ (pci_drv).name = RTE_STR(nm);\
+ rte_eal_pci_register(&pci_drv); \
+} \
+DRIVER_EXPORT_NAME(nm, __COUNTER__)
+
/**
* Unregister a PCI driver.
*
int rte_eal_pci_write_config(const struct rte_pci_device *device,
const void *buf, size_t len, off_t offset);
-#ifdef RTE_PCI_CONFIG
/**
- * Set special config space registers for performance purpose.
+ * A structure used to access io resources for a pci device.
+ * rte_pci_ioport is arch, os, driver specific, and should not be used outside
+ * of pci ioport api.
+ */
+struct rte_pci_ioport {
+ struct rte_pci_device *dev;
+ uint64_t base;
+ uint64_t len; /* only filled for memory mapped ports */
+};
+
+/**
+ * Initialize a rte_pci_ioport object for a pci device io resource.
+ *
+ * This object is then used to gain access to those io resources (see below).
*
* @param dev
* A pointer to a rte_pci_device structure describing the device
- * to use
+ * to use.
+ * @param bar
+ * Index of the io pci resource we want to access.
+ * @param p
+ * The rte_pci_ioport object to be initialized.
+ * @return
+ * 0 on success, negative on error.
+ */
+int rte_eal_pci_ioport_map(struct rte_pci_device *dev, int bar,
+ struct rte_pci_ioport *p);
+
+/**
+ * Release any resources used in a rte_pci_ioport object.
+ *
+ * @param p
+ * The rte_pci_ioport object to be uninitialized.
+ * @return
+ * 0 on success, negative on error.
+ */
+int rte_eal_pci_ioport_unmap(struct rte_pci_ioport *p);
+
+/**
+ * Read from a io pci resource.
+ *
+ * @param p
+ * The rte_pci_ioport object from which we want to read.
+ * @param data
+ * A data buffer where the bytes should be read into
+ * @param len
+ * The length of the data buffer.
+ * @param offset
+ * The offset into the pci io resource.
+ */
+void rte_eal_pci_ioport_read(struct rte_pci_ioport *p,
+ void *data, size_t len, off_t offset);
+
+/**
+ * Write to a io pci resource.
+ *
+ * @param p
+ * The rte_pci_ioport object to which we want to write.
+ * @param data
+ * A data buffer where the bytes should be read into
+ * @param len
+ * The length of the data buffer.
+ * @param offset
+ * The offset into the pci io resource.
*/
-void pci_config_space_set(struct rte_pci_device *dev);
-#endif /* RTE_PCI_CONFIG */
+void rte_eal_pci_ioport_write(struct rte_pci_ioport *p,
+ const void *data, size_t len, off_t offset);
#ifdef __cplusplus
}
git.droids-corp.org / dpdk.git / blobdiff