-/*-
- * BSD LICENSE
- *
- * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of Intel Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2010-2014 Intel Corporation
*/
#include <stdio.h>
#include <rte_common.h>
#include <rte_interrupts.h>
#include <rte_memory.h>
-#include <rte_memzone.h>
#include <rte_launch.h>
#include <rte_eal.h>
#include <rte_per_lcore.h>
#include <rte_branch_prediction.h>
#include <rte_debug.h>
#include <rte_log.h>
-#include <rte_malloc.h>
#include <rte_errno.h>
#include <rte_spinlock.h>
#include <rte_pause.h>
-#include <rte_vfio.h>
#include "eal_private.h"
#include "eal_vfio.h"
return ret;
}
+
+/* enable req notifier */
+static int
+vfio_enable_req(const struct rte_intr_handle *intr_handle)
+{
+ int len, ret;
+ char irq_set_buf[IRQ_SET_BUF_LEN];
+ struct vfio_irq_set *irq_set;
+ int *fd_ptr;
+
+ len = sizeof(irq_set_buf);
+
+ irq_set = (struct vfio_irq_set *) irq_set_buf;
+ irq_set->argsz = len;
+ irq_set->count = 1;
+ irq_set->flags = VFIO_IRQ_SET_DATA_EVENTFD |
+ VFIO_IRQ_SET_ACTION_TRIGGER;
+ irq_set->index = VFIO_PCI_REQ_IRQ_INDEX;
+ irq_set->start = 0;
+ fd_ptr = (int *) &irq_set->data;
+ *fd_ptr = intr_handle->fd;
+
+ ret = ioctl(intr_handle->vfio_dev_fd, VFIO_DEVICE_SET_IRQS, irq_set);
+
+ if (ret) {
+ RTE_LOG(ERR, EAL, "Error enabling req interrupts for fd %d\n",
+ intr_handle->fd);
+ return -1;
+ }
+
+ return 0;
+}
+
+/* disable req notifier */
+static int
+vfio_disable_req(const struct rte_intr_handle *intr_handle)
+{
+ struct vfio_irq_set *irq_set;
+ char irq_set_buf[IRQ_SET_BUF_LEN];
+ int len, ret;
+
+ len = sizeof(struct vfio_irq_set);
+
+ irq_set = (struct vfio_irq_set *) irq_set_buf;
+ irq_set->argsz = len;
+ irq_set->count = 0;
+ irq_set->flags = VFIO_IRQ_SET_DATA_NONE | VFIO_IRQ_SET_ACTION_TRIGGER;
+ irq_set->index = VFIO_PCI_REQ_IRQ_INDEX;
+ irq_set->start = 0;
+
+ ret = ioctl(intr_handle->vfio_dev_fd, VFIO_DEVICE_SET_IRQS, irq_set);
+
+ if (ret)
+ RTE_LOG(ERR, EAL, "Error disabling req interrupts for fd %d\n",
+ intr_handle->fd);
+
+ return ret;
+}
#endif
static int
}
/* allocate a new interrupt callback entity */
- callback = rte_zmalloc("interrupt callback list",
- sizeof(*callback), 0);
+ callback = calloc(1, sizeof(*callback));
if (callback == NULL) {
RTE_LOG(ERR, EAL, "Can not allocate memory\n");
return -ENOMEM;
TAILQ_FOREACH(src, &intr_sources, next) {
if (src->intr_handle.fd == intr_handle->fd) {
/* we had no interrupts for this */
- if TAILQ_EMPTY(&src->callbacks)
+ if (TAILQ_EMPTY(&src->callbacks))
wake_thread = 1;
TAILQ_INSERT_TAIL(&(src->callbacks), callback, next);
/* no existing callbacks for this - add new source */
if (src == NULL) {
- if ((src = rte_zmalloc("interrupt source list",
- sizeof(*src), 0)) == NULL) {
+ src = calloc(1, sizeof(*src));
+ if (src == NULL) {
RTE_LOG(ERR, EAL, "Can not allocate memory\n");
- rte_free(callback);
+ free(callback);
ret = -ENOMEM;
} else {
src->intr_handle = *intr_handle;
if (cb->cb_fn == cb_fn && (cb_arg == (void *)-1 ||
cb->cb_arg == cb_arg)) {
TAILQ_REMOVE(&src->callbacks, cb, next);
- rte_free(cb);
+ free(cb);
ret++;
}
}
/* all callbacks for that source are removed. */
if (TAILQ_EMPTY(&src->callbacks)) {
TAILQ_REMOVE(&intr_sources, src, next);
- rte_free(src);
+ free(src);
}
}
if (vfio_enable_intx(intr_handle))
return -1;
break;
+ case RTE_INTR_HANDLE_VFIO_REQ:
+ if (vfio_enable_req(intr_handle))
+ return -1;
+ break;
#endif
+ /* not used at this moment */
+ case RTE_INTR_HANDLE_DEV_EVENT:
+ return -1;
/* unknown handle type */
default:
RTE_LOG(ERR, EAL,
if (vfio_disable_intx(intr_handle))
return -1;
break;
+ case RTE_INTR_HANDLE_VFIO_REQ:
+ if (vfio_disable_req(intr_handle))
+ return -1;
+ break;
+
#endif
+ /* not used at this moment */
+ case RTE_INTR_HANDLE_DEV_EVENT:
+ return -1;
/* unknown handle type */
default:
RTE_LOG(ERR, EAL,
bytes_read = 0;
call = true;
break;
-
+ case RTE_INTR_HANDLE_DEV_EVENT:
+ bytes_read = 0;
+ call = true;
+ break;
+ case RTE_INTR_HANDLE_VFIO_REQ:
+ bytes_read = 0;
+ call = true;
+ break;
default:
bytes_read = 1;
break;
int
rte_eal_intr_init(void)
{
- int ret = 0, ret_1 = 0;
- char thread_name[RTE_MAX_THREAD_NAME_LEN];
+ int ret = 0;
/* init the global interrupt source head */
TAILQ_INIT(&intr_sources);
}
/* create the host thread to wait/handle the interrupt */
- ret = pthread_create(&intr_thread, NULL,
+ ret = rte_ctrl_thread_create(&intr_thread, "eal-intr-thread", NULL,
eal_intr_thread_main, NULL);
if (ret != 0) {
- rte_errno = ret;
+ rte_errno = -ret;
RTE_LOG(ERR, EAL,
"Failed to create thread for interrupt handling\n");
- } else {
- /* Set thread_name for aid in debugging. */
- snprintf(thread_name, RTE_MAX_THREAD_NAME_LEN,
- "eal-intr-thread");
- ret_1 = rte_thread_setname(intr_thread, thread_name);
- if (ret_1 != 0)
- RTE_LOG(DEBUG, EAL,
- "Failed to set thread name for interrupt handling\n");
}
- return -ret;
+ return ret;
}
static void
eal_intr_proc_rxtx_intr(int fd, const struct rte_intr_handle *intr_handle)
{
union rte_intr_read_buffer buf;
- int bytes_read = 1;
+ int bytes_read = 0;
int nbytes;
switch (intr_handle->type) {
break;
#endif
case RTE_INTR_HANDLE_VDEV:
- /* for vdev, fd points to:
- * a. eventfd which does not need to read out;
- * b. datapath fd which needs PMD to read out.
- */
- return;
+ bytes_read = intr_handle->efd_counter_size;
+ /* For vdev, number of bytes to read is set by driver */
+ break;
case RTE_INTR_HANDLE_EXT:
return;
default:
* read out to clear the ready-to-be-read flag
* for epoll_wait.
*/
+ if (bytes_read == 0)
+ return;
do {
nbytes = read(fd, &buf, bytes_read);
if (nbytes < 0) {
intr_handle->nb_efd = n;
intr_handle->max_intr = NB_OTHER_INTR + n;
} else if (intr_handle->type == RTE_INTR_HANDLE_VDEV) {
- /* do nothing, and let vdev driver to initialize this struct */
+ /* only check, initialization would be done in vdev driver.*/
+ if (intr_handle->efd_counter_size >
+ sizeof(union rte_intr_read_buffer)) {
+ RTE_LOG(ERR, EAL, "the efd_counter_size is oversized");
+ return -EINVAL;
+ }
} else {
intr_handle->efds[0] = intr_handle->fd;
intr_handle->nb_efd = RTE_MIN(nb_efd, 1U);