/*-
* BSD LICENSE
- *
+ *
* Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
* All rights reserved.
- *
+ *
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
- *
+ *
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* * Neither the name of Intel Corporation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
- *
+ *
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-#include <ctype.h>
-#include <stdio.h>
-#include <stdlib.h>
#include <string.h>
-#include <stdarg.h>
-#include <unistd.h>
-#include <inttypes.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <fcntl.h>
-#include <stdarg.h>
-#include <errno.h>
#include <dirent.h>
-#include <limits.h>
-#include <sys/queue.h>
#include <sys/mman.h>
-#include <sys/ioctl.h>
-#include <rte_interrupts.h>
#include <rte_log.h>
#include <rte_pci.h>
-#include <rte_common.h>
-#include <rte_launch.h>
-#include <rte_memory.h>
-#include <rte_memzone.h>
#include <rte_tailq.h>
-#include <rte_eal.h>
#include <rte_eal_memconfig.h>
-#include <rte_per_lcore.h>
-#include <rte_lcore.h>
#include <rte_malloc.h>
-#include <rte_string_fns.h>
-#include <rte_debug.h>
#include <rte_devargs.h>
#include "rte_pci_dev_ids.h"
#include "eal_filesystem.h"
#include "eal_private.h"
+#include "eal_pci_init.h"
/**
* @file
* PCI probing under linux
*
- * This code is used to simulate a PCI probe by parsing information in
- * sysfs. Moreover, when a registered driver matches a device, the
- * kernel driver currently using it is unloaded and replaced by
- * igb_uio module, which is a very minimal userland driver for Intel
- * network card, only providing access to PCI BAR to applications, and
- * enabling bus master.
+ * This code is used to simulate a PCI probe by parsing information in sysfs.
+ * When a registered device matches a driver, it is then initialized with
+ * IGB_UIO driver (or doesn't initialize, if the device wasn't bound to it).
*/
-struct uio_map {
- void *addr;
- uint64_t offset;
- uint64_t size;
- uint64_t phaddr;
-};
-
-/*
- * For multi-process we need to reproduce all PCI mappings in secondary
- * processes, so save them in a tailq.
- */
-struct uio_resource {
- TAILQ_ENTRY(uio_resource) next;
-
- struct rte_pci_addr pci_addr;
- char path[PATH_MAX];
- size_t nb_maps;
- struct uio_map maps[PCI_MAX_RESOURCE];
-};
-
-TAILQ_HEAD(uio_res_list, uio_resource);
-
-static struct uio_res_list *uio_res_list = NULL;
-static int pci_parse_sysfs_value(const char *filename, uint64_t *val);
+struct mapped_pci_res_list *pci_res_list = NULL;
/* unbind kernel driver for this device */
static int
}
/* map a particular resource from a file */
-static void *
-pci_map_resource(void *requested_addr, const char *devname, off_t offset,
- size_t size)
+void *
+pci_map_resource(void *requested_addr, int fd, off_t offset, size_t size)
{
- int fd;
void *mapaddr;
- /*
- * open devname, to mmap it
- */
- fd = open(devname, O_RDWR);
- if (fd < 0) {
- RTE_LOG(ERR, EAL, "Cannot open %s: %s\n",
- devname, strerror(errno));
- goto fail;
- }
-
/* Map the PCI memory resource of device */
mapaddr = mmap(requested_addr, size, PROT_READ | PROT_WRITE,
MAP_SHARED, fd, offset);
- close(fd);
if (mapaddr == MAP_FAILED ||
(requested_addr != NULL && mapaddr != requested_addr)) {
- RTE_LOG(ERR, EAL, "%s(): cannot mmap(%s(%d), %p, 0x%lx, 0x%lx):"
- " %s (%p)\n", __func__, devname, fd, requested_addr,
+ RTE_LOG(ERR, EAL, "%s(): cannot mmap(%d, %p, 0x%lx, 0x%lx): %s (%p)\n",
+ __func__, fd, requested_addr,
(unsigned long)size, (unsigned long)offset,
strerror(errno), mapaddr);
goto fail;
return NULL;
}
-#define OFF_MAX ((uint64_t)(off_t)-1)
-static ssize_t
-pci_uio_get_mappings(const char *devname, struct uio_map maps[], size_t nb_maps)
-{
- size_t i;
- char dirname[PATH_MAX];
- char filename[PATH_MAX];
- uint64_t offset, size;
-
- for (i = 0; i != nb_maps; i++) {
-
- /* check if map directory exists */
- rte_snprintf(dirname, sizeof(dirname),
- "%s/maps/map%u", devname, i);
-
- if (access(dirname, F_OK) != 0)
- break;
-
- /* get mapping offset */
- rte_snprintf(filename, sizeof(filename),
- "%s/offset", dirname);
- if (pci_parse_sysfs_value(filename, &offset) < 0) {
- RTE_LOG(ERR, EAL,
- "%s(): cannot parse offset of %s\n",
- __func__, dirname);
- return (-1);
- }
-
- /* get mapping size */
- rte_snprintf(filename, sizeof(filename),
- "%s/size", dirname);
- if (pci_parse_sysfs_value(filename, &size) < 0) {
- RTE_LOG(ERR, EAL,
- "%s(): cannot parse size of %s\n",
- __func__, dirname);
- return (-1);
- }
-
- /* get mapping physical address */
- rte_snprintf(filename, sizeof(filename),
- "%s/addr", dirname);
- if (pci_parse_sysfs_value(filename, &maps[i].phaddr) < 0) {
- RTE_LOG(ERR, EAL,
- "%s(): cannot parse addr of %s\n",
- __func__, dirname);
- return (-1);
- }
-
- if ((offset > OFF_MAX) || (size > SIZE_MAX)) {
- RTE_LOG(ERR, EAL,
- "%s(): offset/size exceed system max value\n",
- __func__);
- return (-1);
- }
-
- maps[i].offset = offset;
- maps[i].size = size;
- }
- return (i);
-}
-
-static int
-pci_uio_map_secondary(struct rte_pci_device *dev)
-{
- size_t i;
- struct uio_resource *uio_res;
-
- TAILQ_FOREACH(uio_res, uio_res_list, next) {
-
- /* skip this element if it doesn't match our PCI address */
- if (memcmp(&uio_res->pci_addr, &dev->addr, sizeof(dev->addr)))
- continue;
-
- for (i = 0; i != uio_res->nb_maps; i++) {
- if (pci_map_resource(uio_res->maps[i].addr,
- uio_res->path,
- (off_t)uio_res->maps[i].offset,
- (size_t)uio_res->maps[i].size)
- != uio_res->maps[i].addr) {
- RTE_LOG(ERR, EAL,
- "Cannot mmap device resource\n");
- return (-1);
- }
- }
- return (0);
- }
-
- RTE_LOG(ERR, EAL, "Cannot find resource for device\n");
- return -1;
-}
-
-static int pci_mknod_uio_dev(const char *sysfs_uio_path, unsigned uio_num)
-{
- FILE *f;
- char filename[PATH_MAX];
- int ret;
- unsigned major, minor;
- dev_t dev;
-
- /* get the name of the sysfs file that contains the major and minor
- * of the uio device and read its content */
- rte_snprintf(filename, sizeof(filename), "%s/dev", sysfs_uio_path);
-
- f = fopen(filename, "r");
- if (f == NULL) {
- RTE_LOG(ERR, EAL, "%s(): cannot open sysfs to get major:minor\n",
- __func__);
- return -1;
- }
-
- ret = fscanf(f, "%d:%d", &major, &minor);
- if (ret != 2) {
- RTE_LOG(ERR, EAL, "%s(): cannot parse sysfs to get major:minor\n",
- __func__);
- fclose(f);
- return -1;
- }
- fclose(f);
-
- /* create the char device "mknod /dev/uioX c major minor" */
- rte_snprintf(filename, sizeof(filename), "/dev/uio%u", uio_num);
- dev = makedev(major, minor);
- ret = mknod(filename, S_IFCHR | S_IRUSR | S_IWUSR, dev);
- if (f == NULL) {
- RTE_LOG(ERR, EAL, "%s(): mknod() failed %s\n",
- __func__, strerror(errno));
- return -1;
- }
-
- return ret;
-}
-
-/*
- * Return the uioX char device used for a pci device. On success, return
- * the UIO number and fill dstbuf string with the path of the device in
- * sysfs. On error, return a negative value. In this case dstbuf is
- * invalid.
- */
-static int pci_get_uio_dev(struct rte_pci_device *dev, char *dstbuf,
- unsigned int buflen)
-{
- struct rte_pci_addr *loc = &dev->addr;
- unsigned int uio_num;
- struct dirent *e;
- DIR *dir;
- char dirname[PATH_MAX];
-
- /* depending on kernel version, uio can be located in uio/uioX
- * or uio:uioX */
-
- rte_snprintf(dirname, sizeof(dirname),
- SYSFS_PCI_DEVICES "/" PCI_PRI_FMT "/uio",
- loc->domain, loc->bus, loc->devid, loc->function);
-
- dir = opendir(dirname);
- if (dir == NULL) {
- /* retry with the parent directory */
- rte_snprintf(dirname, sizeof(dirname),
- SYSFS_PCI_DEVICES "/" PCI_PRI_FMT,
- loc->domain, loc->bus, loc->devid, loc->function);
- dir = opendir(dirname);
-
- if (dir == NULL) {
- RTE_LOG(ERR, EAL, "Cannot opendir %s\n", dirname);
- return -1;
- }
- }
-
- /* take the first file starting with "uio" */
- while ((e = readdir(dir)) != NULL) {
- /* format could be uio%d ...*/
- int shortprefix_len = sizeof("uio") - 1;
- /* ... or uio:uio%d */
- int longprefix_len = sizeof("uio:uio") - 1;
- char *endptr;
-
- if (strncmp(e->d_name, "uio", 3) != 0)
- continue;
-
- /* first try uio%d */
- errno = 0;
- uio_num = strtoull(e->d_name + shortprefix_len, &endptr, 10);
- if (errno == 0 && endptr != (e->d_name + shortprefix_len)) {
- rte_snprintf(dstbuf, buflen, "%s/uio%u", dirname, uio_num);
- break;
- }
-
- /* then try uio:uio%d */
- errno = 0;
- uio_num = strtoull(e->d_name + longprefix_len, &endptr, 10);
- if (errno == 0 && endptr != (e->d_name + longprefix_len)) {
- rte_snprintf(dstbuf, buflen, "%s/uio:uio%u", dirname, uio_num);
- break;
- }
- }
- closedir(dir);
-
- /* No uio resource found */
- if (e == NULL)
- return -1;
-
- /* create uio device if we've been asked to */
- if (internal_config.create_uio_dev && pci_mknod_uio_dev(dstbuf, uio_num) < 0)
- RTE_LOG(WARNING, EAL, "Cannot create /dev/uio%u\n", uio_num);
-
- return uio_num;
-}
-
-/* map the PCI resource of a PCI device in virtual memory */
-static int
-pci_uio_map_resource(struct rte_pci_device *dev)
-{
- int i, j;
- char dirname[PATH_MAX];
- char devname[PATH_MAX]; /* contains the /dev/uioX */
- void *mapaddr;
- int uio_num;
- uint64_t phaddr;
- uint64_t offset;
- uint64_t pagesz;
- ssize_t nb_maps;
- struct rte_pci_addr *loc = &dev->addr;
- struct uio_resource *uio_res;
- struct uio_map *maps;
-
- dev->intr_handle.fd = -1;
- dev->intr_handle.type = RTE_INTR_HANDLE_UNKNOWN;
-
- /* secondary processes - use already recorded details */
- if (rte_eal_process_type() != RTE_PROC_PRIMARY)
- return (pci_uio_map_secondary(dev));
-
- /* find uio resource */
- uio_num = pci_get_uio_dev(dev, dirname, sizeof(dirname));
- if (uio_num < 0) {
- RTE_LOG(WARNING, EAL, " "PCI_PRI_FMT" not managed by UIO driver, "
- "skipping\n", loc->domain, loc->bus, loc->devid, loc->function);
- return -1;
- }
- rte_snprintf(devname, sizeof(devname), "/dev/uio%u", uio_num);
-
- /* save fd if in primary process */
- dev->intr_handle.fd = open(devname, O_RDWR);
- if (dev->intr_handle.fd < 0) {
- RTE_LOG(ERR, EAL, "Cannot open %s: %s\n",
- devname, strerror(errno));
- return -1;
- }
- dev->intr_handle.type = RTE_INTR_HANDLE_UIO;
-
- /* allocate the mapping details for secondary processes*/
- if ((uio_res = rte_zmalloc("UIO_RES", sizeof (*uio_res), 0)) == NULL) {
- RTE_LOG(ERR, EAL,
- "%s(): cannot store uio mmap details\n", __func__);
- return (-1);
- }
-
- rte_snprintf(uio_res->path, sizeof(uio_res->path), "%s", devname);
- memcpy(&uio_res->pci_addr, &dev->addr, sizeof(uio_res->pci_addr));
-
- /* collect info about device mappings */
- nb_maps = pci_uio_get_mappings(dirname, uio_res->maps,
- RTE_DIM(uio_res->maps));
- if (nb_maps < 0) {
- rte_free(uio_res);
- return (nb_maps);
- }
-
- uio_res->nb_maps = nb_maps;
-
- /* Map all BARs */
- pagesz = sysconf(_SC_PAGESIZE);
-
- maps = uio_res->maps;
- for (i = 0; i != PCI_MAX_RESOURCE; i++) {
-
- /* skip empty BAR */
- if ((phaddr = dev->mem_resource[i].phys_addr) == 0)
- continue;
-
- for (j = 0; j != nb_maps && (phaddr != maps[j].phaddr ||
- dev->mem_resource[i].len != maps[j].size);
- j++)
- ;
-
- /* if matching map is found, then use it */
- if (j != nb_maps) {
- offset = j * pagesz;
- if (maps[j].addr != NULL ||
- (mapaddr = pci_map_resource(NULL, devname,
- (off_t)offset,
- (size_t)maps[j].size)
- ) == NULL) {
- rte_free(uio_res);
- return (-1);
- }
-
- maps[j].addr = mapaddr;
- maps[j].offset = offset;
- dev->mem_resource[i].addr = mapaddr;
- }
- }
-
- TAILQ_INSERT_TAIL(uio_res_list, uio_res, next);
-
- return (0);
-}
-
/* parse the "resource" sysfs file */
#define IORESOURCE_MEM 0x00000200
for (i = 0; i<PCI_MAX_RESOURCE; i++) {
if (fgets(buf, sizeof(buf), f) == NULL) {
- RTE_LOG(ERR, EAL,
+ RTE_LOG(ERR, EAL,
"%s(): cannot read resource\n", __func__);
goto error;
}
if (rte_strsplit(buf, sizeof(buf), res_info.ptrs, 3, ' ') != 3) {
- RTE_LOG(ERR, EAL,
+ RTE_LOG(ERR, EAL,
"%s(): bad resource format\n", __func__);
goto error;
}
end_addr = strtoull(res_info.end_addr, NULL, 16);
flags = strtoull(res_info.flags, NULL, 16);
if (errno != 0) {
- RTE_LOG(ERR, EAL,
+ RTE_LOG(ERR, EAL,
"%s(): bad resource format\n", __func__);
goto error;
}
dev->mem_resource[i].phys_addr = phys_addr;
dev->mem_resource[i].len = end_addr - phys_addr + 1;
/* not mapped for now */
- dev->mem_resource[i].addr = NULL;
+ dev->mem_resource[i].addr = NULL;
}
}
fclose(f);
return -1;
}
-/*
- * parse a sysfs file containing one integer value
- * different to the eal version, as it needs to work with 64-bit values
- */
-static int
-pci_parse_sysfs_value(const char *filename, uint64_t *val)
-{
- FILE *f;
- char buf[BUFSIZ];
- char *end = NULL;
-
- f = fopen(filename, "r");
- if (f == NULL) {
- RTE_LOG(ERR, EAL, "%s(): cannot open sysfs value %s\n",
- __func__, filename);
- return -1;
- }
-
- if (fgets(buf, sizeof(buf), f) == NULL) {
- RTE_LOG(ERR, EAL, "%s(): cannot read sysfs value %s\n",
- __func__, filename);
- fclose(f);
- return -1;
- }
- *val = strtoull(buf, &end, 0);
- if ((buf[0] == '\0') || (end == NULL) || (*end != '\n')) {
- RTE_LOG(ERR, EAL, "%s(): cannot parse sysfs value %s\n",
- __func__, filename);
- fclose(f);
- return -1;
- }
- fclose(f);
- return 0;
-}
-
/* Compare two PCI device addresses. */
static int
pci_addr_comparison(struct rte_pci_addr *addr, struct rte_pci_addr *addr2)
/* get max_vfs */
dev->max_vfs = 0;
rte_snprintf(filename, sizeof(filename), "%s/max_vfs", dirname);
- if (!access(filename, F_OK) &&
+ if (!access(filename, F_OK) &&
eal_parse_sysfs_value(filename, &tmp) == 0) {
dev->max_vfs = (uint16_t)tmp;
}
/* device is valid, add in list (sorted) */
if (TAILQ_EMPTY(&pci_device_list)) {
TAILQ_INSERT_TAIL(&pci_device_list, dev, next);
- }
+ }
else {
struct rte_pci_device *dev2 = NULL;
}
TAILQ_INSERT_TAIL(&pci_device_list, dev, next);
}
-
+
return 0;
}
rte_eal_pci_probe_one_driver(struct rte_pci_driver *dr, struct rte_pci_device *dev)
{
struct rte_pci_id *id_table;
+ int ret = 0;
for (id_table = dr->id_table ; id_table->vendor_id != 0; id_table++) {
if (dev->devargs != NULL &&
dev->devargs->type == RTE_DEVTYPE_BLACKLISTED_PCI) {
RTE_LOG(DEBUG, EAL, " Device is blacklisted, not initializing\n");
- return 0;
+ return 1;
}
- if (dr->drv_flags & RTE_PCI_DRV_NEED_IGB_UIO) {
+ if (dr->drv_flags & RTE_PCI_DRV_NEED_MAPPING) {
/* map resources for devices that use igb_uio */
- if (pci_uio_map_resource(dev) < 0)
- return -1;
+ ret = pci_uio_map_resource(dev);
+ if (ret != 0)
+ return ret;
} else if (dr->drv_flags & RTE_PCI_DRV_FORCE_UNBIND &&
rte_eal_process_type() == RTE_PROC_PRIMARY) {
/* unbind current driver */
{
TAILQ_INIT(&pci_driver_list);
TAILQ_INIT(&pci_device_list);
- uio_res_list = RTE_TAILQ_RESERVE_BY_IDX(RTE_TAILQ_PCI, uio_res_list);
+ pci_res_list = RTE_TAILQ_RESERVE_BY_IDX(RTE_TAILQ_PCI,
+ mapped_pci_res_list);
/* for debug purposes, PCI can be disabled */
if (internal_config.no_pci)
git.droids-corp.org / dpdk.git / blobdiff