};
EAL_REGISTER_TAILQ(rte_vfio_tailq)
-/* per-process VFIO config */
-static struct vfio_config vfio_cfg;
-
int
pci_vfio_read_config(const struct rte_intr_handle *intr_handle,
void *buf, size_t len, off_t offs)
return -1;
}
-/* open group fd or get an existing one */
-int
-pci_vfio_get_group_fd(int iommu_group_no)
-{
- int i;
- int vfio_group_fd;
- char filename[PATH_MAX];
-
- /* check if we already have the group descriptor open */
- for (i = 0; i < vfio_cfg.vfio_group_idx; i++)
- if (vfio_cfg.vfio_groups[i].group_no == iommu_group_no)
- return vfio_cfg.vfio_groups[i].fd;
-
- /* if primary, try to open the group */
- if (internal_config.process_type == RTE_PROC_PRIMARY) {
- /* try regular group format */
- snprintf(filename, sizeof(filename),
- VFIO_GROUP_FMT, iommu_group_no);
- vfio_group_fd = open(filename, O_RDWR);
- if (vfio_group_fd < 0) {
- /* if file not found, it's not an error */
- if (errno != ENOENT) {
- RTE_LOG(ERR, EAL, "Cannot open %s: %s\n", filename,
- strerror(errno));
- return -1;
- }
-
- /* special case: try no-IOMMU path as well */
- snprintf(filename, sizeof(filename),
- VFIO_NOIOMMU_GROUP_FMT, iommu_group_no);
- vfio_group_fd = open(filename, O_RDWR);
- if (vfio_group_fd < 0) {
- if (errno != ENOENT) {
- RTE_LOG(ERR, EAL, "Cannot open %s: %s\n", filename,
- strerror(errno));
- return -1;
- }
- return 0;
- }
- /* noiommu group found */
- }
-
- /* if the fd is valid, create a new group for it */
- if (vfio_cfg.vfio_group_idx == VFIO_MAX_GROUPS) {
- RTE_LOG(ERR, EAL, "Maximum number of VFIO groups reached!\n");
- close(vfio_group_fd);
- return -1;
- }
- vfio_cfg.vfio_groups[vfio_cfg.vfio_group_idx].group_no = iommu_group_no;
- vfio_cfg.vfio_groups[vfio_cfg.vfio_group_idx].fd = vfio_group_fd;
- return vfio_group_fd;
- }
- /* if we're in a secondary process, request group fd from the primary
- * process via our socket
- */
- else {
- int socket_fd, ret;
-
- socket_fd = vfio_mp_sync_connect_to_primary();
-
- if (socket_fd < 0) {
- RTE_LOG(ERR, EAL, " cannot connect to primary process!\n");
- return -1;
- }
- if (vfio_mp_sync_send_request(socket_fd, SOCKET_REQ_GROUP) < 0) {
- RTE_LOG(ERR, EAL, " cannot request container fd!\n");
- close(socket_fd);
- return -1;
- }
- if (vfio_mp_sync_send_request(socket_fd, iommu_group_no) < 0) {
- RTE_LOG(ERR, EAL, " cannot send group number!\n");
- close(socket_fd);
- return -1;
- }
- ret = vfio_mp_sync_receive_request(socket_fd);
- switch (ret) {
- case SOCKET_NO_FD:
- close(socket_fd);
- return 0;
- case SOCKET_OK:
- vfio_group_fd = vfio_mp_sync_receive_fd(socket_fd);
- /* if we got the fd, return it */
- if (vfio_group_fd > 0) {
- close(socket_fd);
- return vfio_group_fd;
- }
- /* fall-through on error */
- default:
- RTE_LOG(ERR, EAL, " cannot get container fd!\n");
- close(socket_fd);
- return -1;
- }
- }
- return -1;
-}
-
-/* parse IOMMU group number for a PCI device
- * returns 1 on success, -1 for errors, 0 for non-existent group
- */
-static int
-pci_vfio_get_group_no(const char *pci_addr, int *iommu_group_no)
-{
- return vfio_get_group_no(pci_get_sysfs_path(), pci_addr, iommu_group_no);
-}
-
-static void
-clear_current_group(void)
-{
- vfio_cfg.vfio_groups[vfio_cfg.vfio_group_idx].group_no = 0;
- vfio_cfg.vfio_groups[vfio_cfg.vfio_group_idx].fd = -1;
-}
-
-/**
- * Setup vfio_cfg for the device indentified by its address. It discovers
- * the configured I/O MMU groups or sets a new one for the device. If a new
- * groups is assigned, the DMA mapping is performed.
- * Returns 0 on success, a negative value on failure and a positive value in
- * case the given device cannot be managed this way.
- */
-static int pci_vfio_setup_device(const char *pci_addr, int *vfio_dev_fd,
- struct vfio_device_info *device_info)
-{
- struct vfio_group_status group_status = {
- .argsz = sizeof(group_status)
- };
- int vfio_group_fd;
- int iommu_group_no;
- int ret;
-
- /* get group number */
- ret = pci_vfio_get_group_no(pci_addr, &iommu_group_no);
- if (ret == 0) {
- RTE_LOG(WARNING, EAL, " %s not managed by VFIO driver, skipping\n",
- pci_addr);
- return 1;
- }
-
- /* if negative, something failed */
- if (ret < 0)
- return -1;
-
- /* get the actual group fd */
- vfio_group_fd = pci_vfio_get_group_fd(iommu_group_no);
- if (vfio_group_fd < 0)
- return -1;
-
- /* store group fd */
- vfio_cfg.vfio_groups[vfio_cfg.vfio_group_idx].group_no = iommu_group_no;
- vfio_cfg.vfio_groups[vfio_cfg.vfio_group_idx].fd = vfio_group_fd;
-
- /* if group_fd == 0, that means the device isn't managed by VFIO */
- if (vfio_group_fd == 0) {
- RTE_LOG(WARNING, EAL, " %s not managed by VFIO driver, skipping\n",
- pci_addr);
- /* we store 0 as group fd to distinguish between existing but
- * unbound VFIO groups, and groups that don't exist at all.
- */
- vfio_cfg.vfio_group_idx++;
- return 1;
- }
-
- /*
- * at this point, we know that this group is viable (meaning, all devices
- * are either bound to VFIO or not bound to anything)
- */
-
- /* check if the group is viable */
- ret = ioctl(vfio_group_fd, VFIO_GROUP_GET_STATUS, &group_status);
- if (ret) {
- RTE_LOG(ERR, EAL, " %s cannot get group status, "
- "error %i (%s)\n", pci_addr, errno, strerror(errno));
- close(vfio_group_fd);
- clear_current_group();
- return -1;
- } else if (!(group_status.flags & VFIO_GROUP_FLAGS_VIABLE)) {
- RTE_LOG(ERR, EAL, " %s VFIO group is not viable!\n", pci_addr);
- close(vfio_group_fd);
- clear_current_group();
- return -1;
- }
-
- /* check if group does not have a container yet */
- if (!(group_status.flags & VFIO_GROUP_FLAGS_CONTAINER_SET)) {
-
- /* add group to a container */
- ret = ioctl(vfio_group_fd, VFIO_GROUP_SET_CONTAINER,
- &vfio_cfg.vfio_container_fd);
- if (ret) {
- RTE_LOG(ERR, EAL, " %s cannot add VFIO group to container, "
- "error %i (%s)\n", pci_addr, errno, strerror(errno));
- close(vfio_group_fd);
- clear_current_group();
- return -1;
- }
- /*
- * at this point we know that this group has been successfully
- * initialized, so we increment vfio_group_idx to indicate that we can
- * add new groups.
- */
- vfio_cfg.vfio_group_idx++;
- }
-
- /*
- * pick an IOMMU type and set up DMA mappings for container
- *
- * needs to be done only once, only when at least one group is assigned to
- * a container and only in primary process
- */
- if (internal_config.process_type == RTE_PROC_PRIMARY &&
- vfio_cfg.vfio_container_has_dma == 0) {
- /* select an IOMMU type which we will be using */
- const struct vfio_iommu_type *t =
- vfio_set_iommu_type(vfio_cfg.vfio_container_fd);
- if (!t) {
- RTE_LOG(ERR, EAL, " %s failed to select IOMMU type\n", pci_addr);
- return -1;
- }
- ret = t->dma_map_func(vfio_cfg.vfio_container_fd);
- if (ret) {
- RTE_LOG(ERR, EAL, " %s DMA remapping failed, "
- "error %i (%s)\n", pci_addr, errno, strerror(errno));
- return -1;
- }
- vfio_cfg.vfio_container_has_dma = 1;
- }
-
- /* get a file descriptor for the device */
- *vfio_dev_fd = ioctl(vfio_group_fd, VFIO_GROUP_GET_DEVICE_FD, pci_addr);
- if (*vfio_dev_fd < 0) {
- /* if we cannot get a device fd, this simply means that this
- * particular port is not bound to VFIO
- */
- RTE_LOG(WARNING, EAL, " %s not managed by VFIO driver, skipping\n",
- pci_addr);
- return 1;
- }
-
- /* test and setup the device */
- ret = ioctl(*vfio_dev_fd, VFIO_DEVICE_GET_INFO, device_info);
- if (ret) {
- RTE_LOG(ERR, EAL, " %s cannot get device info, "
- "error %i (%s)\n", pci_addr, errno, strerror(errno));
- close(*vfio_dev_fd);
- return -1;
- }
-
- return 0;
-}
-
/*
* map the PCI resources of a PCI device in virtual memory (VFIO version).
* primary and secondary processes follow almost exactly the same path
snprintf(pci_addr, sizeof(pci_addr), PCI_PRI_FMT,
loc->domain, loc->bus, loc->devid, loc->function);
- if ((ret = pci_vfio_setup_device(pci_addr, &vfio_dev_fd, &device_info)))
+ if ((ret = vfio_setup_device(pci_get_sysfs_path(), pci_addr,
+ &vfio_dev_fd, &device_info)))
return ret;
/* get MSI-X BAR, if any (we have to know where it is because we can't
int
pci_vfio_enable(void)
{
- /* initialize group list */
- int i;
- int vfio_available;
-
- for (i = 0; i < VFIO_MAX_GROUPS; i++) {
- vfio_cfg.vfio_groups[i].fd = -1;
- vfio_cfg.vfio_groups[i].group_no = -1;
- }
-
- /* inform the user that we are probing for VFIO */
- RTE_LOG(INFO, EAL, "Probing VFIO support...\n");
-
- /* check if vfio-pci module is loaded */
- vfio_available = rte_eal_check_module("vfio_pci");
-
- /* return error directly */
- if (vfio_available == -1) {
- RTE_LOG(INFO, EAL, "Could not get loaded module details!\n");
- return -1;
- }
-
- /* return 0 if VFIO modules not loaded */
- if (vfio_available == 0) {
- RTE_LOG(DEBUG, EAL, "VFIO modules not loaded, "
- "skipping VFIO support...\n");
- return 0;
- }
-
- vfio_cfg.vfio_container_fd = vfio_get_container_fd();
-
- /* check if we have VFIO driver enabled */
- if (vfio_cfg.vfio_container_fd != -1) {
- RTE_LOG(NOTICE, EAL, "VFIO support initialized\n");
- vfio_cfg.vfio_enabled = 1;
- } else {
- RTE_LOG(NOTICE, EAL, "VFIO support could not be initialized\n");
- }
-
- return 0;
+ return vfio_enable("vfio_pci");
}
int
pci_vfio_is_enabled(void)
{
- return vfio_cfg.vfio_enabled;
+ return vfio_is_enabled("vfio_pci");
}
#endif
git.droids-corp.org / dpdk.git / blobdiff