-/*-
- * BSD LICENSE
- *
- * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of Intel Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2010-2014 Intel Corporation
*/
#ifndef EAL_VFIO_H_
/*
* determine if VFIO is present on the system
*/
-#ifdef RTE_EAL_VFIO
+#if !defined(VFIO_PRESENT) && defined(RTE_EAL_VFIO)
#include <linux/version.h>
#if LINUX_VERSION_CODE >= KERNEL_VERSION(3, 6, 0)
-#include <linux/vfio.h>
-
-#if LINUX_VERSION_CODE < KERNEL_VERSION(3, 10, 0)
-#define RTE_PCI_MSIX_TABLE_BIR 0x7
-#define RTE_PCI_MSIX_TABLE_OFFSET 0xfffffff8
-#define RTE_PCI_MSIX_FLAGS_QSIZE 0x07ff
+#define VFIO_PRESENT
#else
-#define RTE_PCI_MSIX_TABLE_BIR PCI_MSIX_TABLE_BIR
-#define RTE_PCI_MSIX_TABLE_OFFSET PCI_MSIX_TABLE_OFFSET
-#define RTE_PCI_MSIX_FLAGS_QSIZE PCI_MSIX_FLAGS_QSIZE
-#endif
+#pragma message("VFIO configured but not supported by this kernel, disabling.")
+#endif /* kernel version >= 3.6.0 */
+#endif /* RTE_EAL_VFIO */
+
+#ifdef VFIO_PRESENT
+
+#include <linux/vfio.h>
#define RTE_VFIO_TYPE1 VFIO_TYPE1_IOMMU
+#ifndef VFIO_SPAPR_TCE_v2_IOMMU
+#define RTE_VFIO_SPAPR 7
+#define VFIO_IOMMU_SPAPR_REGISTER_MEMORY _IO(VFIO_TYPE, VFIO_BASE + 17)
+#define VFIO_IOMMU_SPAPR_TCE_CREATE _IO(VFIO_TYPE, VFIO_BASE + 19)
+#define VFIO_IOMMU_SPAPR_TCE_REMOVE _IO(VFIO_TYPE, VFIO_BASE + 20)
+
+struct vfio_iommu_spapr_register_memory {
+ uint32_t argsz;
+ uint32_t flags;
+ uint64_t vaddr;
+ uint64_t size;
+};
+
+struct vfio_iommu_spapr_tce_create {
+ uint32_t argsz;
+ uint32_t flags;
+ /* in */
+ uint32_t page_shift;
+ uint32_t __resv1;
+ uint64_t window_size;
+ uint32_t levels;
+ uint32_t __resv2;
+ /* out */
+ uint64_t start_addr;
+};
+
+struct vfio_iommu_spapr_tce_remove {
+ uint32_t argsz;
+ uint32_t flags;
+ /* in */
+ uint64_t start_addr;
+};
+
+struct vfio_iommu_spapr_tce_ddw_info {
+ uint64_t pgsizes;
+ uint32_t max_dynamic_windows_supported;
+ uint32_t levels;
+};
+
+/* SPAPR_v2 is not present, but SPAPR might be */
+#ifndef VFIO_SPAPR_TCE_IOMMU
+#define VFIO_IOMMU_SPAPR_TCE_GET_INFO _IO(VFIO_TYPE, VFIO_BASE + 12)
+
+struct vfio_iommu_spapr_tce_info {
+ uint32_t argsz;
+ uint32_t flags;
+ uint32_t dma32_window_start;
+ uint32_t dma32_window_size;
+ struct vfio_iommu_spapr_tce_ddw_info ddw;
+};
+#endif /* VFIO_SPAPR_TCE_IOMMU */
+
+#else /* VFIO_SPAPR_TCE_v2_IOMMU */
+#define RTE_VFIO_SPAPR VFIO_SPAPR_TCE_v2_IOMMU
+#endif
+
#if LINUX_VERSION_CODE < KERNEL_VERSION(4, 5, 0)
#define RTE_VFIO_NOIOMMU 8
#else
struct vfio_group {
int group_no;
int fd;
+ int devices;
};
struct vfio_config {
int vfio_enabled;
int vfio_container_fd;
- int vfio_container_has_dma;
- int vfio_group_idx;
+ int vfio_active_groups;
struct vfio_group vfio_groups[VFIO_MAX_GROUPS];
};
-#define VFIO_DIR "/dev/vfio"
-#define VFIO_CONTAINER_PATH "/dev/vfio/vfio"
-#define VFIO_GROUP_FMT "/dev/vfio/%u"
-#define VFIO_NOIOMMU_GROUP_FMT "/dev/vfio/noiommu-%u"
-#define VFIO_GET_REGION_ADDR(x) ((uint64_t) x << 40ULL)
-#define VFIO_GET_REGION_IDX(x) (x >> 40)
-
/* DMA mapping function prototype.
* Takes VFIO container fd as a parameter.
* Returns 0 on success, -1 on error.
int
vfio_get_group_fd(int iommu_group_no);
-/**
- * Setup vfio_cfg for the device indentified by its address. It discovers
- * the configured I/O MMU groups or sets a new one for the device. If a new
- * groups is assigned, the DMA mapping is performed.
- * Returns 0 on success, a negative value on failure and a positive value in
- * case the given device cannot be managed this way.
- */
-int vfio_setup_device(const char *sysfs_base, const char *dev_addr,
- int *vfio_dev_fd, struct vfio_device_info *device_info);
-
-int vfio_enable(const char *modname);
-int vfio_is_enabled(const char *modname);
+/* remove group fd from internal VFIO group fd array */
+int
+clear_group(int vfio_group_fd);
-int vfio_type1_dma_map(int);
-int vfio_noiommu_dma_map(int);
-
-/* IOMMU types we support */
-static const struct vfio_iommu_type iommu_types[] = {
- /* x86 IOMMU, otherwise known as type 1 */
- { RTE_VFIO_TYPE1, "Type 1", &vfio_type1_dma_map},
- /* IOMMU-less mode */
- { RTE_VFIO_NOIOMMU, "No-IOMMU", &vfio_noiommu_dma_map},
-};
+int vfio_mp_sync_setup(void);
#define SOCKET_REQ_CONTAINER 0x100
#define SOCKET_REQ_GROUP 0x200
+#define SOCKET_CLR_GROUP 0x300
#define SOCKET_OK 0x0
#define SOCKET_NO_FD 0x1
#define SOCKET_ERR 0xFF
-#define VFIO_PRESENT
-#endif /* kernel version */
-#endif /* RTE_EAL_VFIO */
+#endif /* VFIO_PRESENT */
#endif /* EAL_VFIO_H_ */