net/virtio: fix incorrect cast of void *

[dpdk.git] / lib / librte_eal / linuxapp / eal / eal_vfio.h

diff --git a/lib/librte_eal/linuxapp/eal/eal_vfio.h b/lib/librte_eal/linuxapp/eal/eal_vfio.h
index b2b0d27..ba7892b 100644 (file)
--- a/lib/librte_eal/linuxapp/eal/eal_vfio.h
+++ b/lib/librte_eal/linuxapp/eal/eal_vfio.h
@@ -37,23 +37,77 @@
 /*
  * determine if VFIO is present on the system
  */
-#ifdef RTE_EAL_VFIO
+#if !defined(VFIO_PRESENT) && defined(RTE_EAL_VFIO)
 #include <linux/version.h>
 #if LINUX_VERSION_CODE >= KERNEL_VERSION(3, 6, 0)
-#include <linux/vfio.h>
-
-#if LINUX_VERSION_CODE < KERNEL_VERSION(3, 10, 0)
-#define RTE_PCI_MSIX_TABLE_BIR    0x7
-#define RTE_PCI_MSIX_TABLE_OFFSET 0xfffffff8
-#define RTE_PCI_MSIX_FLAGS_QSIZE  0x07ff
+#define VFIO_PRESENT
 #else
-#define RTE_PCI_MSIX_TABLE_BIR    PCI_MSIX_TABLE_BIR
-#define RTE_PCI_MSIX_TABLE_OFFSET PCI_MSIX_TABLE_OFFSET
-#define RTE_PCI_MSIX_FLAGS_QSIZE  PCI_MSIX_FLAGS_QSIZE
-#endif
+#pragma message("VFIO configured but not supported by this kernel, disabling.")
+#endif /* kernel version >= 3.6.0 */
+#endif /* RTE_EAL_VFIO */
+
+#ifdef VFIO_PRESENT
+
+#include <linux/vfio.h>
 
 #define RTE_VFIO_TYPE1 VFIO_TYPE1_IOMMU
 
+#ifndef VFIO_SPAPR_TCE_v2_IOMMU
+#define RTE_VFIO_SPAPR 7
+#define VFIO_IOMMU_SPAPR_REGISTER_MEMORY _IO(VFIO_TYPE, VFIO_BASE + 17)
+#define VFIO_IOMMU_SPAPR_TCE_CREATE _IO(VFIO_TYPE, VFIO_BASE + 19)
+#define VFIO_IOMMU_SPAPR_TCE_REMOVE _IO(VFIO_TYPE, VFIO_BASE + 20)
+
+struct vfio_iommu_spapr_register_memory {
+       uint32_t argsz;
+       uint32_t flags;
+       uint64_t vaddr;
+       uint64_t size;
+};
+
+struct vfio_iommu_spapr_tce_create {
+       uint32_t argsz;
+       uint32_t flags;
+       /* in */
+       uint32_t page_shift;
+       uint32_t __resv1;
+       uint64_t window_size;
+       uint32_t levels;
+       uint32_t __resv2;
+       /* out */
+       uint64_t start_addr;
+};
+
+struct vfio_iommu_spapr_tce_remove {
+       uint32_t argsz;
+       uint32_t flags;
+       /* in */
+       uint64_t start_addr;
+};
+
+struct vfio_iommu_spapr_tce_ddw_info {
+       uint64_t pgsizes;
+       uint32_t max_dynamic_windows_supported;
+       uint32_t levels;
+};
+
+/* SPAPR_v2 is not present, but SPAPR might be */
+#ifndef VFIO_SPAPR_TCE_IOMMU
+#define VFIO_IOMMU_SPAPR_TCE_GET_INFO _IO(VFIO_TYPE, VFIO_BASE + 12)
+
+struct vfio_iommu_spapr_tce_info {
+       uint32_t argsz;
+       uint32_t flags;
+       uint32_t dma32_window_start;
+       uint32_t dma32_window_size;
+       struct vfio_iommu_spapr_tce_ddw_info ddw;
+};
+#endif /* VFIO_SPAPR_TCE_IOMMU */
+
+#else /* VFIO_SPAPR_TCE_v2_IOMMU */
+#define RTE_VFIO_SPAPR VFIO_SPAPR_TCE_v2_IOMMU
+#endif
+
 #if LINUX_VERSION_CODE < KERNEL_VERSION(4, 5, 0)
 #define RTE_VFIO_NOIOMMU 8
 #else
@@ -78,23 +132,16 @@ int vfio_mp_sync_connect_to_primary(void);
 struct vfio_group {
        int group_no;
        int fd;
+       int devices;
 };
 
 struct vfio_config {
        int vfio_enabled;
        int vfio_container_fd;
-       int vfio_container_has_dma;
-       int vfio_group_idx;
+       int vfio_active_groups;
        struct vfio_group vfio_groups[VFIO_MAX_GROUPS];
 };
 
-#define VFIO_DIR "/dev/vfio"
-#define VFIO_CONTAINER_PATH "/dev/vfio/vfio"
-#define VFIO_GROUP_FMT "/dev/vfio/%u"
-#define VFIO_NOIOMMU_GROUP_FMT "/dev/vfio/noiommu-%u"
-#define VFIO_GET_REGION_ADDR(x) ((uint64_t) x << 40ULL)
-#define VFIO_GET_REGION_IDX(x) (x >> 40)
-
 /* DMA mapping function prototype.
  * Takes VFIO container fd as a parameter.
  * Returns 0 on success, -1 on error.
@@ -130,38 +177,19 @@ vfio_get_group_no(const char *sysfs_base,
 int
 vfio_get_group_fd(int iommu_group_no);
 
-/**
- * Setup vfio_cfg for the device identified by its address. It discovers
- * the configured I/O MMU groups or sets a new one for the device. If a new
- * groups is assigned, the DMA mapping is performed.
- * Returns 0 on success, a negative value on failure and a positive value in
- * case the given device cannot be managed this way.
- */
-int vfio_setup_device(const char *sysfs_base, const char *dev_addr,
-               int *vfio_dev_fd, struct vfio_device_info *device_info);
-
-int vfio_enable(const char *modname);
-int vfio_is_enabled(const char *modname);
+/* remove group fd from internal VFIO group fd array */
+int
+clear_group(int vfio_group_fd);
 
-int vfio_type1_dma_map(int);
-int vfio_noiommu_dma_map(int);
-
-/* IOMMU types we support */
-static const struct vfio_iommu_type iommu_types[] = {
-       /* x86 IOMMU, otherwise known as type 1 */
-       { RTE_VFIO_TYPE1, "Type 1", &vfio_type1_dma_map},
-       /* IOMMU-less mode */
-       { RTE_VFIO_NOIOMMU, "No-IOMMU", &vfio_noiommu_dma_map},
-};
+int vfio_mp_sync_setup(void);
 
 #define SOCKET_REQ_CONTAINER 0x100
 #define SOCKET_REQ_GROUP 0x200
+#define SOCKET_CLR_GROUP 0x300
 #define SOCKET_OK 0x0
 #define SOCKET_NO_FD 0x1
 #define SOCKET_ERR 0xFF
 
-#define VFIO_PRESENT
-#endif /* kernel version */
-#endif /* RTE_EAL_VFIO */
+#endif /* VFIO_PRESENT */
 
 #endif /* EAL_VFIO_H_ */