#include <rte_byteorder.h>
#include <rte_esp.h>
#include <rte_higig.h>
+#include <rte_mbuf.h>
+#include <rte_mbuf_dyn.h>
#ifdef __cplusplus
extern "C" {
/**
* [META]
*
- * Matches a metadata value specified in mbuf metadata field.
+ * Matches a metadata value.
+ *
* See struct rte_flow_item_meta.
*/
RTE_FLOW_ITEM_TYPE_META,
*/
RTE_FLOW_ITEM_TYPE_HIGIG2,
- /*
+ /**
* [META]
*
* Matches a tag value.
* See struct rte_flow_item_tag.
*/
RTE_FLOW_ITEM_TYPE_TAG,
+
+ /**
+ * Matches a L2TPv3 over IP header.
+ *
+ * Configure flow for L2TPv3 over IP packets.
+ *
+ * See struct rte_flow_item_l2tpv3oip.
+ */
+ RTE_FLOW_ITEM_TYPE_L2TPV3OIP,
+
};
/**
#endif
/**
- * RTE_FLOW_ITEM_TYPE_META.
+ * RTE_FLOW_ITEM_TYPE_META
*
- * Matches a specified metadata value.
+ * Matches a specified metadata value. On egress, metadata can be set
+ * either by mbuf dynamic metadata field with PKT_TX_DYNF_METADATA flag or
+ * RTE_FLOW_ACTION_TYPE_SET_META. On ingress, RTE_FLOW_ACTION_TYPE_SET_META
+ * sets metadata for a packet and the metadata will be reported via mbuf
+ * metadata dynamic field with PKT_RX_DYNF_METADATA flag. The dynamic mbuf
+ * field must be registered in advance by rte_flow_dynf_metadata_register().
*/
struct rte_flow_item_meta {
- rte_be32_t data;
+ uint32_t data;
};
/** Default mask for RTE_FLOW_ITEM_TYPE_META. */
#ifndef __cplusplus
static const struct rte_flow_item_meta rte_flow_item_meta_mask = {
- .data = RTE_BE32(UINT32_MAX),
+ .data = UINT32_MAX,
};
#endif
};
#endif
+/**
+ * RTE_FLOW_ITEM_TYPE_L2TPV3OIP.
+ *
+ * Matches a L2TPv3 over IP header.
+ */
+struct rte_flow_item_l2tpv3oip {
+ rte_be32_t session_id; /**< Session ID. */
+};
+
+/** Default mask for RTE_FLOW_ITEM_TYPE_L2TPV3OIP. */
+#ifndef __cplusplus
+static const struct rte_flow_item_l2tpv3oip rte_flow_item_l2tpv3oip_mask = {
+ .session_id = RTE_BE32(UINT32_MAX),
+};
+#endif
+
+
/**
* @warning
* @b EXPERIMENTAL: this structure may change without prior notice
* See struct rte_flow_action_set_tag.
*/
RTE_FLOW_ACTION_TYPE_SET_TAG,
+
+ /**
+ * Set metadata on ingress or egress path.
+ *
+ * See struct rte_flow_action_set_meta.
+ */
+ RTE_FLOW_ACTION_TYPE_SET_META,
+
+ /**
+ * Modify IPv4 DSCP in the outermost IP header.
+ *
+ * If flow pattern does not define a valid RTE_FLOW_ITEM_TYPE_IPV4,
+ * then the PMD should return a RTE_FLOW_ERROR_TYPE_ACTION error.
+ *
+ * See struct rte_flow_action_set_dscp.
+ */
+ RTE_FLOW_ACTION_TYPE_SET_IPV4_DSCP,
+
+ /**
+ * Modify IPv6 DSCP in the outermost IP header.
+ *
+ * If flow pattern does not define a valid RTE_FLOW_ITEM_TYPE_IPV6,
+ * then the PMD should return a RTE_FLOW_ERROR_TYPE_ACTION error.
+ *
+ * See struct rte_flow_action_set_dscp.
+ */
+ RTE_FLOW_ACTION_TYPE_SET_IPV6_DSCP,
};
/**
* direction.
*
* Multiple flows can be configured to use the same security session.
+ *
+ * The NULL value is allowed for security session. If security session is NULL,
+ * then SPI field in ESP flow item and IP addresses in flow items 'IPv4' and
+ * 'IPv6' will be allowed to be a range. The rule thus created can enable
+ * security processing on multiple flows.
*/
struct rte_flow_action_security {
void *security_session; /**< Pointer to security session structure. */
uint8_t index;
};
+/**
+ * @warning
+ * @b EXPERIMENTAL: this structure may change without prior notice
+ *
+ * RTE_FLOW_ACTION_TYPE_SET_META
+ *
+ * Set metadata. Metadata set by mbuf metadata dynamic field with
+ * PKT_TX_DYNF_DATA flag on egress will be overridden by this action. On
+ * ingress, the metadata will be carried by mbuf metadata dynamic field
+ * with PKT_RX_DYNF_METADATA flag if set. The dynamic mbuf field must be
+ * registered in advance by rte_flow_dynf_metadata_register().
+ *
+ * Altering partial bits is supported with mask. For bits which have never
+ * been set, unpredictable value will be seen depending on driver
+ * implementation. For loopback/hairpin packet, metadata set on Rx/Tx may
+ * or may not be propagated to the other path depending on HW capability.
+ *
+ * RTE_FLOW_ITEM_TYPE_META matches metadata.
+ */
+struct rte_flow_action_set_meta {
+ uint32_t data;
+ uint32_t mask;
+};
+
+/**
+ * RTE_FLOW_ACTION_TYPE_SET_IPV4_DSCP
+ * RTE_FLOW_ACTION_TYPE_SET_IPV6_DSCP
+ *
+ * Set the DSCP value for IPv4/IPv6 header.
+ * DSCP in low 6 bits, rest ignored.
+ */
+struct rte_flow_action_set_dscp {
+ uint8_t dscp;
+};
+
+/* Mbuf dynamic field offset for metadata. */
+extern int rte_flow_dynf_metadata_offs;
+
+/* Mbuf dynamic field flag mask for metadata. */
+extern uint64_t rte_flow_dynf_metadata_mask;
+
+/* Mbuf dynamic field pointer for metadata. */
+#define RTE_FLOW_DYNF_METADATA(m) \
+ RTE_MBUF_DYNFIELD((m), rte_flow_dynf_metadata_offs, uint32_t *)
+
+/* Mbuf dynamic flags for metadata. */
+#define PKT_RX_DYNF_METADATA (rte_flow_dynf_metadata_mask)
+#define PKT_TX_DYNF_METADATA (rte_flow_dynf_metadata_mask)
+
+__rte_experimental
+static inline uint32_t
+rte_flow_dynf_metadata_get(struct rte_mbuf *m)
+{
+ return *RTE_FLOW_DYNF_METADATA(m);
+}
+
+__rte_experimental
+static inline void
+rte_flow_dynf_metadata_set(struct rte_mbuf *m, uint32_t v)
+{
+ *RTE_FLOW_DYNF_METADATA(m) = v;
+}
+
/*
* Definition of a single action.
*
RTE_FLOW_CONV_OP_ACTION_NAME_PTR,
};
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Dump hardware internal representation information of
+ * rte flow to file.
+ *
+ * @param[in] port_id
+ * The port identifier of the Ethernet device.
+ * @param[in] file
+ * A pointer to a file for output.
+ * @param[out] error
+ * Perform verbose error reporting if not NULL. PMDs initialize this
+ * structure in case of error only.
+ * @return
+ * 0 on success, a nagative value otherwise.
+ */
+__rte_experimental
+int
+rte_flow_dev_dump(uint16_t port_id, FILE *file, struct rte_flow_error *error);
+
+/**
+ * Check if mbuf dynamic field for metadata is registered.
+ *
+ * @return
+ * True if registered, false otherwise.
+ */
+__rte_experimental
+static inline int
+rte_flow_dynf_metadata_avail(void)
+{
+ return !!rte_flow_dynf_metadata_mask;
+}
+
+/**
+ * Register mbuf dynamic field and flag for metadata.
+ *
+ * This function must be called prior to use SET_META action in order to
+ * register the dynamic mbuf field. Otherwise, the data cannot be delivered to
+ * application.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+__rte_experimental
+int
+rte_flow_dynf_metadata_register(void);
+
/**
* Check whether a flow rule can be created on a given port.
*
git.droids-corp.org / dpdk.git / blobdiff