* the same mempool and has refcnt = 1.
*/
#define DEV_TX_OFFLOAD_SECURITY 0x00020000
+/**
+ * Device supports generic UDP tunneled packet TSO.
+ * Application must set PKT_TX_TUNNEL_UDP and other mbuf fields required
+ * for tunnel TSO.
+ */
+#define DEV_TX_OFFLOAD_UDP_TNL_TSO 0x00040000
+/**
+ * Device supports generic IP tunneled packet TSO.
+ * Application must set PKT_TX_TUNNEL_IP and other mbuf fields required
+ * for tunnel TSO.
+ */
+#define DEV_TX_OFFLOAD_IP_TNL_TSO 0x00080000
+
+#define RTE_ETH_DEV_CAPA_RUNTIME_RX_QUEUE_SETUP 0x00000001
+/**< Device supports Rx queue setup after device started*/
+#define RTE_ETH_DEV_CAPA_RUNTIME_TX_QUEUE_SETUP 0x00000002
+/**< Device supports Tx queue setup after device started*/
/*
* If new Tx offload capabilities are defined, they also must be
struct rte_pci_device;
+/*
+ * Fallback default preferred Rx/Tx port parameters.
+ * These are used if an application requests default parameters
+ * but the PMD does not provide preferred values.
+ */
+#define RTE_ETH_DEV_FALLBACK_RX_RINGSIZE 512
+#define RTE_ETH_DEV_FALLBACK_TX_RINGSIZE 512
+#define RTE_ETH_DEV_FALLBACK_RX_NBQUEUES 1
+#define RTE_ETH_DEV_FALLBACK_TX_NBQUEUES 1
+
+/**
+ * Preferred Rx/Tx port parameters.
+ * There are separate instances of this structure for transmission
+ * and reception respectively.
+ */
+struct rte_eth_dev_portconf {
+ uint16_t burst_size; /**< Device-preferred burst size */
+ uint16_t ring_size; /**< Device-preferred size of queue rings */
+ uint16_t nb_queues; /**< Device-preferred number of queues */
+};
+
/**
* Ethernet device information
*/
struct rte_eth_dev_info {
- struct rte_pci_device *pci_dev; /**< Device PCI information. */
+ struct rte_device *device; /** Generic device information */
const char *driver_name; /**< Device Driver name. */
unsigned int if_index; /**< Index to bound host interface, or 0 if none.
Use if_indextoname() to translate into an interface name. */
/** Configured number of rx/tx queues */
uint16_t nb_rx_queues; /**< Number of RX queues. */
uint16_t nb_tx_queues; /**< Number of TX queues. */
+ /** Rx parameter recommendations */
+ struct rte_eth_dev_portconf default_rxportconf;
+ /** Tx parameter recommendations */
+ struct rte_eth_dev_portconf default_txportconf;
+ /** Generic device capabilities (RTE_ETH_DEV_CAPA_). */
+ uint64_t dev_capa;
};
/**
#define RTE_ETH_QUEUE_STATE_STOPPED 0
#define RTE_ETH_QUEUE_STATE_STARTED 1
-struct rte_eth_dev;
-
#define RTE_ETH_ALL RTE_MAX_ETHPORTS
/* Macros to check for valid port */
#define RTE_ETH_DEV_INTR_RMV 0x0008
/**
- * @warning
- * @b EXPERIMENTAL: this API may change without prior notice.
- *
* Iterates over valid ethdev ports owned by a specific owner.
*
* @param port_id
* @return
* Next valid port id owned by owner_id, RTE_MAX_ETHPORTS if there is none.
*/
-uint64_t __rte_experimental rte_eth_find_next_owned_by(uint16_t port_id,
+uint64_t rte_eth_find_next_owned_by(uint16_t port_id,
const uint64_t owner_id);
/**
* @return
* - The total number of usable Ethernet devices.
*/
+__rte_deprecated
uint16_t rte_eth_dev_count(void);
+/**
+ * Get the number of ports which are usable for the application.
+ *
+ * These devices must be iterated by using the macro
+ * ``RTE_ETH_FOREACH_DEV`` or ``RTE_ETH_FOREACH_DEV_OWNED_BY``
+ * to deal with non-contiguous ranges of devices.
+ *
+ * @return
+ * The count of available Ethernet devices.
+ */
+uint16_t rte_eth_dev_count_avail(void);
+
+/**
+ * Get the total number of ports which are allocated.
+ *
+ * Some devices may not be available for the application.
+ *
+ * @return
+ * The total count of Ethernet devices.
+ */
+uint16_t __rte_experimental rte_eth_dev_count_total(void);
+
/**
* Attach a new Ethernet device specified by arguments.
*
int
rte_eth_tx_done_cleanup(uint16_t port_id, uint16_t queue_id, uint32_t free_cnt);
+/**
+ * Subtypes for IPsec offload event(@ref RTE_ETH_EVENT_IPSEC) raised by
+ * eth device.
+ */
+enum rte_eth_event_ipsec_subtype {
+ RTE_ETH_EVENT_IPSEC_UNKNOWN = 0,
+ /**< Unknown event type */
+ RTE_ETH_EVENT_IPSEC_ESN_OVERFLOW,
+ /**< Sequence number overflow */
+ RTE_ETH_EVENT_IPSEC_SA_TIME_EXPIRY,
+ /**< Soft time expiry of SA */
+ RTE_ETH_EVENT_IPSEC_SA_BYTE_EXPIRY,
+ /**< Soft byte expiry of SA */
+ RTE_ETH_EVENT_IPSEC_MAX
+ /**< Max value of this enum */
+};
+
+/**
+ * Descriptor for @ref RTE_ETH_EVENT_IPSEC event. Used by eth dev to send extra
+ * information of the IPsec offload event.
+ */
+struct rte_eth_event_ipsec_desc {
+ enum rte_eth_event_ipsec_subtype subtype;
+ /**< Type of RTE_ETH_EVENT_IPSEC_* event */
+ uint64_t metadata;
+ /**< Event specific metadata
+ *
+ * For the following events, *userdata* registered
+ * with the *rte_security_session* would be returned
+ * as metadata,
+ *
+ * - @ref RTE_ETH_EVENT_IPSEC_ESN_OVERFLOW
+ * - @ref RTE_ETH_EVENT_IPSEC_SA_TIME_EXPIRY
+ * - @ref RTE_ETH_EVENT_IPSEC_SA_BYTE_EXPIRY
+ *
+ * @see struct rte_security_session_conf
+ *
+ */
+};
+
/**
* The eth device event type for interrupt, and maybe others in the future.
*/
RTE_ETH_EVENT_INTR_RMV, /**< device removal event */
RTE_ETH_EVENT_NEW, /**< port is probed */
RTE_ETH_EVENT_DESTROY, /**< port is released */
+ RTE_ETH_EVENT_IPSEC, /**< IPsec offload related event */
RTE_ETH_EVENT_MAX /**< max value of this enum */
};
int rte_eth_dev_get_dcb_info(uint16_t port_id,
struct rte_eth_dcb_info *dcb_info);
+struct rte_eth_rxtx_callback;
+
/**
* Add a callback to be called on packet RX on a given port and queue.
*
* NULL on error.
* On success, a pointer value which can later be used to remove the callback.
*/
-void *rte_eth_add_rx_callback(uint16_t port_id, uint16_t queue_id,
+const struct rte_eth_rxtx_callback *
+rte_eth_add_rx_callback(uint16_t port_id, uint16_t queue_id,
rte_rx_callback_fn fn, void *user_param);
/**
* NULL on error.
* On success, a pointer value which can later be used to remove the callback.
*/
-void *rte_eth_add_first_rx_callback(uint16_t port_id, uint16_t queue_id,
+const struct rte_eth_rxtx_callback *
+rte_eth_add_first_rx_callback(uint16_t port_id, uint16_t queue_id,
rte_rx_callback_fn fn, void *user_param);
/**
* NULL on error.
* On success, a pointer value which can later be used to remove the callback.
*/
-void *rte_eth_add_tx_callback(uint16_t port_id, uint16_t queue_id,
+const struct rte_eth_rxtx_callback *
+rte_eth_add_tx_callback(uint16_t port_id, uint16_t queue_id,
rte_tx_callback_fn fn, void *user_param);
-struct rte_eth_rxtx_callback;
-
/**
* Remove an RX packet callback from a given port and queue.
*
* is NULL or not found for the port/queue.
*/
int rte_eth_remove_rx_callback(uint16_t port_id, uint16_t queue_id,
- struct rte_eth_rxtx_callback *user_cb);
+ const struct rte_eth_rxtx_callback *user_cb);
/**
* Remove a TX packet callback from a given port and queue.
* is NULL or not found for the port/queue.
*/
int rte_eth_remove_tx_callback(uint16_t port_id, uint16_t queue_id,
- struct rte_eth_rxtx_callback *user_cb);
+ const struct rte_eth_rxtx_callback *user_cb);
/**
* Retrieve information about given port's RX queue.
*/
int rte_eth_dev_set_eeprom(uint16_t port_id, struct rte_dev_eeprom_info *info);
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Retrieve the type and size of plugin module EEPROM
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param modinfo
+ * The type and size of plugin module EEPROM.
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if hardware doesn't support.
+ * - (-ENODEV) if *port_id* invalid.
+ * - (-EIO) if device is removed.
+ * - others depends on the specific operations implementation.
+ */
+int __rte_experimental
+rte_eth_dev_get_module_info(uint16_t port_id,
+ struct rte_eth_dev_module_info *modinfo);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Retrieve the data of plugin module EEPROM
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param info
+ * The template includes the plugin module EEPROM attributes, and the
+ * buffer for return plugin module EEPROM data.
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if hardware doesn't support.
+ * - (-ENODEV) if *port_id* invalid.
+ * - (-EIO) if device is removed.
+ * - others depends on the specific operations implementation.
+ */
+int __rte_experimental
+rte_eth_dev_get_module_eeprom(uint16_t port_id,
+ struct rte_dev_eeprom_info *info);
+
/**
* Set the list of multicast addresses to filter on an Ethernet device.
*
* invoke this function concurrently on the same tx queue without SW lock.
* @see rte_eth_dev_info_get, struct rte_eth_txconf::txq_flags
*
+ * @see rte_eth_tx_prepare to perform some prior checks or adjustments
+ * for offloads.
+ *
* @param port_id
* The port identifier of the Ethernet device.
* @param queue_id
git.droids-corp.org / dpdk.git / blobdiff