uint64_t ibytes; /**< Total number of successfully received bytes. */
uint64_t obytes; /**< Total number of successfully transmitted bytes. */
uint64_t imissed;
- /**< Deprecated; Total of RX missed packets (e.g full FIFO). */
+ /**< Total of RX packets dropped by the HW,
+ * because there are no available mbufs (i.e. RX queues are full).
+ */
uint64_t ibadcrc;
/**< Deprecated; Total of RX packets with CRC error. */
uint64_t ibadlen;
uint8_t tx_deferred_start; /**< Do not start queue with rte_eth_dev_start(). */
};
+/**
+ * A structure contains information about HW descriptor ring limitations.
+ */
+struct rte_eth_desc_lim {
+ uint16_t nb_max; /**< Max allowed number of descriptors. */
+ uint16_t nb_min; /**< Min allowed number of descriptors. */
+ uint16_t nb_align; /**< Number of descriptors should be aligned to. */
+};
+
/**
* This enum indicates the flow control mode
*/
uint16_t vmdq_queue_base; /**< First queue ID for VMDQ pools. */
uint16_t vmdq_queue_num; /**< Queue number for VMDQ pools. */
uint16_t vmdq_pool_base; /**< First ID of VMDQ pools. */
+ struct rte_eth_desc_lim rx_desc_lim; /**< RX descriptors limits */
+ struct rte_eth_desc_lim tx_desc_lim; /**< TX descriptors limits */
};
+/**
+ * Ethernet device RX queue information structure.
+ * Used to retieve information about configured queue.
+ */
+struct rte_eth_rxq_info {
+ struct rte_mempool *mp; /**< mempool used by that queue. */
+ struct rte_eth_rxconf conf; /**< queue config parameters. */
+ uint8_t scattered_rx; /**< scattered packets RX supported. */
+ uint16_t nb_desc; /**< configured number of RXDs. */
+} __rte_cache_aligned;
+
+/**
+ * Ethernet device TX queue information structure.
+ * Used to retieve information about configured queue.
+ */
+struct rte_eth_txq_info {
+ struct rte_eth_txconf conf; /**< queue config parameters. */
+ uint16_t nb_desc; /**< configured number of TXDs. */
+} __rte_cache_aligned;
+
/** Maximum name length for extended statistics counters */
#define RTE_ETH_XSTATS_NAME_SIZE 64
uint64_t value;
};
+#define ETH_DCB_NUM_TCS 8
+#define ETH_MAX_VMDQ_POOL 64
+
+/**
+ * A structure used to get the information of queue and
+ * TC mapping on both TX and RX paths.
+ */
+struct rte_eth_dcb_tc_queue_mapping {
+ /** rx queues assigned to tc per Pool */
+ struct {
+ uint8_t base;
+ uint8_t nb_queue;
+ } tc_rxq[ETH_MAX_VMDQ_POOL][ETH_DCB_NUM_TCS];
+ /** rx queues assigned to tc per Pool */
+ struct {
+ uint8_t base;
+ uint8_t nb_queue;
+ } tc_txq[ETH_MAX_VMDQ_POOL][ETH_DCB_NUM_TCS];
+};
+
+/**
+ * A structure used to get the information of DCB.
+ * It includes TC UP mapping and queue TC mapping.
+ */
+struct rte_eth_dcb_info {
+ uint8_t nb_tcs; /**< number of TCs */
+ uint8_t prio_tc[ETH_DCB_NUM_USER_PRIORITIES]; /**< Priority to tc */
+ uint8_t tc_bws[ETH_DCB_NUM_TCS]; /**< TX BW percentage for each TC */
+ /** rx queues assigned to tc */
+ struct rte_eth_dcb_tc_queue_mapping tc_queue;
+};
+
struct rte_eth_dev;
struct rte_eth_dev_callback;
typedef int (*eth_rx_descriptor_done_t)(void *rxq, uint16_t offset);
/**< @internal Check DD bit of specific RX descriptor */
+typedef void (*eth_rxq_info_get_t)(struct rte_eth_dev *dev,
+ uint16_t rx_queue_id, struct rte_eth_rxq_info *qinfo);
+
+typedef void (*eth_txq_info_get_t)(struct rte_eth_dev *dev,
+ uint16_t tx_queue_id, struct rte_eth_txq_info *qinfo);
+
typedef int (*mtu_set_t)(struct rte_eth_dev *dev, uint16_t mtu);
/**< @internal Set MTU. */
void *arg);
/**< @internal Take operations to assigned filter type on an Ethernet device */
+typedef int (*eth_get_dcb_info)(struct rte_eth_dev *dev,
+ struct rte_eth_dcb_info *dcb_info);
+/**< @internal Get dcb information on an Ethernet device */
+
/**
* @internal A structure containing the functions exported by an Ethernet driver.
*/
rss_hash_update_t rss_hash_update;
/** Get current RSS hash configuration. */
rss_hash_conf_get_t rss_hash_conf_get;
- eth_filter_ctrl_t filter_ctrl; /**< common filter control*/
+ eth_filter_ctrl_t filter_ctrl;
+ /**< common filter control. */
eth_set_mc_addr_list_t set_mc_addr_list; /**< set list of mcast addrs */
-
+ eth_rxq_info_get_t rxq_info_get;
+ /**< retrieve RX queue information. */
+ eth_txq_info_get_t txq_info_get;
+ /**< retrieve TX queue information. */
/** Turn IEEE1588/802.1AS timestamping on. */
eth_timesync_enable_t timesync_enable;
/** Turn IEEE1588/802.1AS timestamping off. */
eth_timesync_read_rx_timestamp_t timesync_read_rx_timestamp;
/** Read the IEEE1588/802.1AS TX timestamp. */
eth_timesync_read_tx_timestamp_t timesync_read_tx_timestamp;
+
+ /** Get DCB information */
+ eth_get_dcb_info get_dcb_info;
};
/**
all_multicast : 1, /**< RX all multicast mode ON(1) / OFF(0). */
dev_started : 1, /**< Device state: STARTED(1) / STOPPED(0). */
lro : 1; /**< RX LRO is ON(1) / OFF(0) */
+ uint32_t dev_flags; /**< Capabilities */
+ enum rte_kernel_driver kdrv; /**< Kernel driver passthrough */
+ int numa_node; /**< NUMA node connection */
+ const char *drv_name; /**< Driver name */
};
+/** Device supports hotplug detach */
+#define RTE_ETH_DEV_DETACHABLE 0x0001
+/** Device supports link state interrupt */
+#define RTE_ETH_DEV_INTR_LSC 0x0002
+
/**
* @internal
* The pool of *rte_eth_dev* structures. The size of the pool
int rte_eth_dev_filter_ctrl(uint8_t port_id, enum rte_filter_type filter_type,
enum rte_filter_op filter_op, void *arg);
+/**
+ * Get DCB information on an Ethernet device.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param dcb_info
+ * dcb information.
+ * @return
+ * - (0) if successful.
+ * - (-ENODEV) if port identifier is invalid.
+ * - (-ENOTSUP) if hardware doesn't support.
+ */
+int rte_eth_dev_get_dcb_info(uint8_t port_id,
+ struct rte_eth_dcb_info *dcb_info);
+
/**
* Add a callback to be called on packet RX on a given port and queue.
*
struct rte_eth_rxtx_callback *user_cb);
/**
+ * Retrieve information about given port's RX queue.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param queue_id
+ * The RX queue on the Ethernet device for which information
+ * will be retrieved.
+ * @param qinfo
+ * A pointer to a structure of type *rte_eth_rxq_info_info* to be filled with
+ * the information of the Ethernet device.
+ *
+ * @return
+ * - 0: Success
+ * - -ENOTSUP: routine is not supported by the device PMD.
+ * - -EINVAL: The port_id or the queue_id is out of range.
+ */
+int rte_eth_rx_queue_info_get(uint8_t port_id, uint16_t queue_id,
+ struct rte_eth_rxq_info *qinfo);
+
+/**
+ * Retrieve information about given port's TX queue.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param queue_id
+ * The TX queue on the Ethernet device for which information
+ * will be retrieved.
+ * @param qinfo
+ * A pointer to a structure of type *rte_eth_txq_info_info* to be filled with
+ * the information of the Ethernet device.
+ *
+ * @return
+ * - 0: Success
+ * - -ENOTSUP: routine is not supported by the device PMD.
+ * - -EINVAL: The port_id or the queue_id is out of range.
+ */
+int rte_eth_tx_queue_info_get(uint8_t port_id, uint16_t queue_id,
+ struct rte_eth_txq_info *qinfo);
+
+/*
* Retrieve number of available registers for access
*
* @param port_id
extern int rte_eth_timesync_read_tx_timestamp(uint8_t port_id,
struct timespec *timestamp);
+/**
+ * Copy pci device info to the Ethernet device data.
+ *
+ * @param eth_dev
+ * The *eth_dev* pointer is the address of the *rte_eth_dev* structure.
+ * @param pci_dev
+ * The *pci_dev* pointer is the address of the *rte_pci_device* structure.
+ *
+ * @return
+ * - 0 on success, negative on error
+ */
+extern void rte_eth_copy_pci_info(struct rte_eth_dev *eth_dev, struct rte_pci_device *pci_dev);
+
+
#ifdef __cplusplus
}
#endif
git.droids-corp.org / dpdk.git / blobdiff