void *param;
};
+/**
+ * A set of values to describe the possible states of an eth device.
+ */
+enum rte_eth_dev_state {
+ RTE_ETH_DEV_UNUSED = 0,
+ RTE_ETH_DEV_ATTACHED,
+};
+
/**
* @internal
* The generic data structure associated with each ethernet device.
eth_tx_burst_t tx_pkt_burst; /**< Pointer to PMD transmit function. */
eth_tx_prep_t tx_pkt_prepare; /**< Pointer to PMD transmit prepare function. */
struct rte_eth_dev_data *data; /**< Pointer to device data */
- const struct eth_driver *driver;/**< Driver for this device */
const struct eth_dev_ops *dev_ops; /**< Functions exported by PMD */
struct rte_device *device; /**< Backing device */
struct rte_intr_handle *intr_handle; /**< Device interrupt handle */
* received packets before passing them to the driver for transmission.
*/
struct rte_eth_rxtx_callback *pre_tx_burst_cbs[RTE_MAX_QUEUES_PER_PORT];
- uint8_t attached; /**< Flag indicating the port is attached */
+ enum rte_eth_dev_state state:8; /**< Flag indicating the port state */
} __rte_cache_aligned;
struct rte_eth_dev_sriov {
*/
extern struct rte_eth_dev rte_eth_devices[];
+/**
+ * Iterates over valid ethdev ports.
+ *
+ * @param port_id
+ * The id of the next possible valid port.
+ * @return
+ * Next valid port id, RTE_MAX_ETHPORTS if there is none.
+ */
+uint8_t rte_eth_find_next(uint8_t port_id);
+
+/**
+ * Macro to iterate over all enabled ethdev ports.
+ */
+#define RTE_ETH_FOREACH_DEV(p) \
+ for (p = rte_eth_find_next(0); \
+ (unsigned int)p < (unsigned int)RTE_MAX_ETHPORTS; \
+ p = rte_eth_find_next(p + 1))
+
+
/**
* Get the total number of Ethernet devices that have been successfully
* initialized by the [matching] Ethernet driver during the PCI probing phase.
* immediately after invoking rte_eal_init().
* If the application unplugs a port using hotplug function, The enabled port
* numbers may be noncontiguous. In the case, the applications need to manage
- * enabled port by themselves.
+ * enabled port by using the ``RTE_ETH_FOREACH_DEV()`` macro.
*
* @return
* - The total number of usable Ethernet devices.
*/
struct rte_eth_dev *rte_eth_dev_allocate(const char *name);
+/**
+ * @internal
+ * Attach to the ethdev already initialized by the primary
+ * process.
+ *
+ * @param name Ethernet device's name.
+ * @return
+ * - Success: Slot in the rte_dev_devices array for attached
+ * device.
+ * - Error: Null pointer.
+ */
+struct rte_eth_dev *rte_eth_dev_attach_secondary(const char *name);
+
/**
* @internal
* Release the specified ethdev port.
*/
int rte_eth_dev_detach(uint8_t port_id, char *devname);
-struct eth_driver;
-/**
- * @internal
- * Initialization function of an Ethernet driver invoked for each matching
- * Ethernet PCI device detected during the PCI probing phase.
- *
- * @param eth_dev
- * The *eth_dev* pointer is the address of the *rte_eth_dev* structure
- * associated with the matching device and which have been [automatically]
- * allocated in the *rte_eth_devices* array.
- * The *eth_dev* structure is supplied to the driver initialization function
- * with the following fields already initialized:
- *
- * - *pci_dev*: Holds the pointers to the *rte_pci_device* structure which
- * contains the generic PCI information of the matching device.
- *
- * - *driver*: Holds the pointer to the *eth_driver* structure.
- *
- * - *dev_private*: Holds a pointer to the device private data structure.
- *
- * - *mtu*: Contains the default Ethernet maximum frame length (1500).
- *
- * - *port_id*: Contains the port index of the device (actually the index
- * of the *eth_dev* structure in the *rte_eth_devices* array).
- *
- * @return
- * - 0: Success, the device is properly initialized by the driver.
- * In particular, the driver MUST have set up the *dev_ops* pointer
- * of the *eth_dev* structure.
- * - <0: Error code of the device initialization failure.
- */
-typedef int (*eth_dev_init_t)(struct rte_eth_dev *eth_dev);
-
-/**
- * @internal
- * Finalization function of an Ethernet driver invoked for each matching
- * Ethernet PCI device detected during the PCI closing phase.
- *
- * @param eth_dev
- * The *eth_dev* pointer is the address of the *rte_eth_dev* structure
- * associated with the matching device and which have been [automatically]
- * allocated in the *rte_eth_devices* array.
- * @return
- * - 0: Success, the device is properly finalized by the driver.
- * In particular, the driver MUST free the *dev_ops* pointer
- * of the *eth_dev* structure.
- * - <0: Error code of the device initialization failure.
- */
-typedef int (*eth_dev_uninit_t)(struct rte_eth_dev *eth_dev);
-
-/**
- * @internal
- * The structure associated with a PMD Ethernet driver.
- *
- * Each Ethernet driver acts as a PCI driver and is represented by a generic
- * *eth_driver* structure that holds:
- *
- * - An *rte_pci_driver* structure (which must be the first field).
- *
- * - The *eth_dev_init* function invoked for each matching PCI device.
- *
- * - The *eth_dev_uninit* function invoked for each matching PCI device.
- *
- * - The size of the private data to allocate for each matching device.
- */
-struct eth_driver {
- struct rte_pci_driver pci_drv; /**< The PMD is also a PCI driver. */
- eth_dev_init_t eth_dev_init; /**< Device init function. */
- eth_dev_uninit_t eth_dev_uninit; /**< Device uninit function. */
- unsigned int dev_private_size; /**< Size of device private data. */
-};
-
/**
* Convert a numerical speed in Mbps to a bitmap flag that can be used in
* the bitmap link_speeds of the struct rte_eth_conf
int
rte_eth_dev_get_name_by_port(uint8_t port_id, char *name);
-/**
- * @internal
- * Wrapper for use by pci drivers as a .probe function to attach to a ethdev
- * interface.
- */
-int rte_eth_dev_pci_probe(struct rte_pci_driver *pci_drv,
- struct rte_pci_device *pci_dev);
-
-/**
- * @internal
- * Wrapper for use by pci drivers as a .remove function to detach a ethdev
- * interface.
- */
-int rte_eth_dev_pci_remove(struct rte_pci_device *pci_dev);
-
#ifdef __cplusplus
}
#endif
git.droids-corp.org / dpdk.git / blobdiff