#include <rte_pci.h>
#include <rte_dev.h>
#include <rte_devargs.h>
+#include <rte_errno.h>
#include "rte_ether.h"
#include "rte_eth_ctrl.h"
#include "rte_dev_info.h"
uint16_t nb_max; /**< Max allowed number of descriptors. */
uint16_t nb_min; /**< Min allowed number of descriptors. */
uint16_t nb_align; /**< Number of descriptors should be aligned to. */
+
+ /**
+ * Max allowed number of segments per whole packet.
+ *
+ * - For TSO packet this is the total number of data descriptors allowed
+ * by device.
+ *
+ * @see nb_mtu_seg_max
+ */
+ uint16_t nb_seg_max;
+
+ /**
+ * Max number of segments per one MTU.
+ *
+ * - For non-TSO packet, this is the maximum allowed number of segments
+ * in a single transmit packet.
+ *
+ * - For TSO packet each segment within the TSO may span up to this
+ * value.
+ *
+ * @see nb_seg_max
+ */
+ uint16_t nb_mtu_seg_max;
};
/**
#define DEV_RX_OFFLOAD_TCP_LRO 0x00000010
#define DEV_RX_OFFLOAD_QINQ_STRIP 0x00000020
#define DEV_RX_OFFLOAD_OUTER_IPV4_CKSUM 0x00000040
+#define DEV_RX_OFFLOAD_MACSEC_STRIP 0x00000080
/**
* TX offload capabilities of a device.
#define DEV_TX_OFFLOAD_GRE_TNL_TSO 0x00000400 /**< Used for tunneling packet. */
#define DEV_TX_OFFLOAD_IPIP_TNL_TSO 0x00000800 /**< Used for tunneling packet. */
#define DEV_TX_OFFLOAD_GENEVE_TNL_TSO 0x00001000 /**< Used for tunneling packet. */
+#define DEV_TX_OFFLOAD_MACSEC_INSERT 0x00002000
/**
* Ethernet device information
/**
* An Ethernet device extended statistic structure
*
- * This structure is used by ethdev->eth_xstats_get() to provide
- * statistics that are not provided in the generic rte_eth_stats
+ * This structure is used by rte_eth_xstats_get() to provide
+ * statistics that are not provided in the generic *rte_eth_stats*
* structure.
+ * It maps a name id, corresponding to an index in the array returned
+ * by rte_eth_xstats_get_names(), to a statistic value.
*/
struct rte_eth_xstat {
- uint64_t id;
- uint64_t value;
+ uint64_t id; /**< The index in xstats name array. */
+ uint64_t value; /**< The statistic counter value. */
};
/**
- * A name-key lookup element for extended statistics.
+ * A name element for extended statistics.
*
- * This structure is used to map between names and ID numbers
- * for extended ethernet statistics.
+ * An array of this structure is returned by rte_eth_xstats_get_names().
+ * It lists the names of extended statistics for a PMD. The *rte_eth_xstat*
+ * structure references these names by their array index.
*/
struct rte_eth_xstat_name {
- char name[RTE_ETH_XSTATS_NAME_SIZE];
+ char name[RTE_ETH_XSTATS_NAME_SIZE]; /**< The statistic name. */
};
#define ETH_DCB_NUM_TCS 8
typedef uint32_t (*eth_rx_queue_count_t)(struct rte_eth_dev *dev,
uint16_t rx_queue_id);
-/**< @internal Get number of available descriptors on a receive queue of an Ethernet device. */
+/**< @internal Get number of used descriptors on a receive queue. */
typedef int (*eth_rx_descriptor_done_t)(void *rxq, uint16_t offset);
/**< @internal Check DD bit of specific RX descriptor */
+typedef int (*eth_fw_version_get_t)(struct rte_eth_dev *dev,
+ char *fw_version, size_t fw_size);
+/**< @internal Get firmware information of an Ethernet device. */
+
+typedef int (*eth_tx_done_cleanup_t)(void *txq, uint32_t free_cnt);
+/**< @internal Force mbufs to be from TX ring. */
+
typedef void (*eth_rxq_info_get_t)(struct rte_eth_dev *dev,
uint16_t rx_queue_id, struct rte_eth_rxq_info *qinfo);
uint16_t nb_pkts);
/**< @internal Send output packets on a transmit queue of an Ethernet device. */
+typedef uint16_t (*eth_tx_prep_t)(void *txq,
+ struct rte_mbuf **tx_pkts,
+ uint16_t nb_pkts);
+/**< @internal Prepare output packets on a transmit queue of an Ethernet device. */
+
typedef int (*flow_ctrl_get_t)(struct rte_eth_dev *dev,
struct rte_eth_fc_conf *fc_conf);
/**< @internal Get current flow control parameter on an Ethernet device */
uint8_t on);
/**< @internal Set all Unicast Hash bitmap */
-typedef int (*eth_set_vf_rx_mode_t)(struct rte_eth_dev *dev,
- uint16_t vf,
- uint16_t rx_mode,
- uint8_t on);
-/**< @internal Set a VF receive mode */
-
-typedef int (*eth_set_vf_rx_t)(struct rte_eth_dev *dev,
- uint16_t vf,
- uint8_t on);
-/**< @internal Set a VF receive mode */
-
-typedef int (*eth_set_vf_tx_t)(struct rte_eth_dev *dev,
- uint16_t vf,
- uint8_t on);
-/**< @internal Enable or disable a VF transmit */
-
-typedef int (*eth_set_vf_vlan_filter_t)(struct rte_eth_dev *dev,
- uint16_t vlan,
- uint64_t vf_mask,
- uint8_t vlan_on);
-/**< @internal Set VF VLAN pool filter */
-
typedef int (*eth_set_queue_rate_limit_t)(struct rte_eth_dev *dev,
uint16_t queue_idx,
uint16_t tx_rate);
/**< @internal Set queue TX rate */
-typedef int (*eth_set_vf_rate_limit_t)(struct rte_eth_dev *dev,
- uint16_t vf,
- uint16_t tx_rate,
- uint64_t q_msk);
-/**< @internal Set VF TX rate */
-
typedef int (*eth_mirror_rule_set_t)(struct rte_eth_dev *dev,
struct rte_eth_mirror_conf *mirror_conf,
uint8_t rule_id,
eth_dev_infos_get_t dev_infos_get; /**< Get device info. */
eth_rxq_info_get_t rxq_info_get; /**< retrieve RX queue information. */
eth_txq_info_get_t txq_info_get; /**< retrieve TX queue information. */
+ eth_fw_version_get_t fw_version_get; /**< Get firmware version. */
eth_dev_supported_ptypes_get_t dev_supported_ptypes_get;
/**< Get packet types supported and identified by device. */
eth_queue_stop_t tx_queue_stop; /**< Stop TX for a queue. */
eth_rx_queue_setup_t rx_queue_setup;/**< Set up device RX queue. */
eth_queue_release_t rx_queue_release; /**< Release RX queue. */
- eth_rx_queue_count_t rx_queue_count;/**< Get Rx queue count. */
+ eth_rx_queue_count_t rx_queue_count;
+ /**< Get the number of used RX descriptors. */
eth_rx_descriptor_done_t rx_descriptor_done; /**< Check rxd DD bit. */
eth_rx_enable_intr_t rx_queue_intr_enable; /**< Enable Rx queue interrupt. */
eth_rx_disable_intr_t rx_queue_intr_disable; /**< Disable Rx queue interrupt. */
eth_tx_queue_setup_t tx_queue_setup;/**< Set up device TX queue. */
eth_queue_release_t tx_queue_release; /**< Release TX queue. */
+ eth_tx_done_cleanup_t tx_done_cleanup;/**< Free tx ring mbufs */
eth_dev_led_on_t dev_led_on; /**< Turn on LED. */
eth_dev_led_off_t dev_led_off; /**< Turn off LED. */
eth_mirror_rule_set_t mirror_rule_set; /**< Add a traffic mirror rule. */
eth_mirror_rule_reset_t mirror_rule_reset; /**< reset a traffic mirror rule. */
- eth_set_vf_rx_mode_t set_vf_rx_mode;/**< Set VF RX mode. */
- eth_set_vf_rx_t set_vf_rx; /**< enable/disable a VF receive. */
- eth_set_vf_tx_t set_vf_tx; /**< enable/disable a VF transmit. */
- eth_set_vf_vlan_filter_t set_vf_vlan_filter; /**< Set VF VLAN filter. */
- eth_set_vf_rate_limit_t set_vf_rate_limit; /**< Set VF rate limit. */
-
eth_udp_tunnel_port_add_t udp_tunnel_port_add; /** Add UDP tunnel port. */
eth_udp_tunnel_port_del_t udp_tunnel_port_del; /** Del UDP tunnel port. */
eth_l2_tunnel_eth_type_conf_t l2_tunnel_eth_type_conf;
struct rte_eth_dev {
eth_rx_burst_t rx_pkt_burst; /**< Pointer to PMD receive function. */
eth_tx_burst_t tx_pkt_burst; /**< Pointer to PMD transmit function. */
+ eth_tx_prep_t tx_pkt_prepare; /**< Pointer to PMD transmit prepare function. */
struct rte_eth_dev_data *data; /**< Pointer to device data */
const struct eth_driver *driver;/**< Driver for this device */
const struct eth_dev_ops *dev_ops; /**< Functions exported by PMD */
* @param port_id
* The port identifier of the Ethernet device.
* @param xstats_names
- * Block of memory to insert names into. Must be at least size in capacity.
- * If set to NULL, function returns required capacity.
+ * An rte_eth_xstat_name array of at least *size* elements to
+ * be filled. If set to NULL, the function returns the required number
+ * of elements.
* @param size
- * Capacity of xstats_names (number of names).
+ * The size of the xstats_names array (number of elements).
* @return
- * - positive value lower or equal to size: success. The return value
+ * - A positive value lower or equal to size: success. The return value
* is the number of entries filled in the stats table.
- * - positive value higher than size: error, the given statistics table
+ * - A positive value higher than size: error, the given statistics table
* is too small. The return value corresponds to the size that should
* be given to succeed. The entries in the table are not valid and
* shall not be used by the caller.
- * - negative value on error (invalid port id)
+ * - A negative value on error (invalid port id).
*/
int rte_eth_xstats_get_names(uint8_t port_id,
struct rte_eth_xstat_name *xstats_names,
* The port identifier of the Ethernet device.
* @param xstats
* A pointer to a table of structure of type *rte_eth_xstat*
- * to be filled with device statistics ids and values.
+ * to be filled with device statistics ids and values: id is the
+ * index of the name string in xstats_names (see rte_eth_xstats_get_names()),
+ * and value is the statistic counter.
* This parameter can be set to NULL if n is 0.
* @param n
- * The size of the stats table, which should be large enough to store
- * all the statistics of the device.
+ * The size of the xstats array (number of elements).
* @return
- * - positive value lower or equal to n: success. The return value
+ * - A positive value lower or equal to n: success. The return value
* is the number of entries filled in the stats table.
- * - positive value higher than n: error, the given statistics table
+ * - A positive value higher than n: error, the given statistics table
* is too small. The return value corresponds to the size that should
* be given to succeed. The entries in the table are not valid and
* shall not be used by the caller.
- * - negative value on error (invalid port id)
+ * - A negative value on error (invalid port id).
*/
int rte_eth_xstats_get(uint8_t port_id, struct rte_eth_xstat *xstats,
unsigned n);
*/
void rte_eth_dev_info_get(uint8_t port_id, struct rte_eth_dev_info *dev_info);
+/**
+ * Retrieve the firmware version of a device.
+ *
+ * @param port_id
+ * The port identifier of the device.
+ * @param fw_version
+ * A pointer to a string array storing the firmware version of a device,
+ * the string includes terminating null. This pointer is allocated by caller.
+ * @param fw_size
+ * The size of the string array pointed by fw_version, which should be
+ * large enough to store firmware version of the device.
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if operation is not supported.
+ * - (-ENODEV) if *port_id* invalid.
+ * - (>0) if *fw_size* is not enough to store firmware version, return
+ * the size of the non truncated string.
+ */
+int rte_eth_dev_fw_version_get(uint8_t port_id,
+ char *fw_version, size_t fw_size);
+
/**
* Retrieve the supported packet types of an Ethernet device.
*
}
/**
- * Get the number of used descriptors in a specific queue
+ * Get the number of used descriptors of a rx queue
*
* @param port_id
* The port identifier of the Ethernet device.
* The queue id on the specific port.
* @return
* The number of used descriptors in the specific queue, or:
- * (-EINVAL) if *port_id* is invalid
+ * (-EINVAL) if *port_id* or *queue_id* is invalid
* (-ENOTSUP) if the device does not support this function
*/
static inline int
rte_eth_rx_queue_count(uint8_t port_id, uint16_t queue_id)
{
- struct rte_eth_dev *dev = &rte_eth_devices[port_id];
+ struct rte_eth_dev *dev;
+
RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -EINVAL);
+ dev = &rte_eth_devices[port_id];
RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->rx_queue_count, -ENOTSUP);
- return (*dev->dev_ops->rx_queue_count)(dev, queue_id);
+ if (queue_id >= dev->data->nb_rx_queues)
+ return -EINVAL;
+
+ return (*dev->dev_ops->rx_queue_count)(dev, queue_id);
}
/**
return (*dev->tx_pkt_burst)(dev->data->tx_queues[queue_id], tx_pkts, nb_pkts);
}
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice
+ *
+ * Process a burst of output packets on a transmit queue of an Ethernet device.
+ *
+ * The rte_eth_tx_prepare() function is invoked to prepare output packets to be
+ * transmitted on the output queue *queue_id* of the Ethernet device designated
+ * by its *port_id*.
+ * The *nb_pkts* parameter is the number of packets to be prepared which are
+ * supplied in the *tx_pkts* array of *rte_mbuf* structures, each of them
+ * allocated from a pool created with rte_pktmbuf_pool_create().
+ * For each packet to send, the rte_eth_tx_prepare() function performs
+ * the following operations:
+ *
+ * - Check if packet meets devices requirements for tx offloads.
+ *
+ * - Check limitations about number of segments.
+ *
+ * - Check additional requirements when debug is enabled.
+ *
+ * - Update and/or reset required checksums when tx offload is set for packet.
+ *
+ * Since this function can modify packet data, provided mbufs must be safely
+ * writable (e.g. modified data cannot be in shared segment).
+ *
+ * The rte_eth_tx_prepare() function returns the number of packets ready to be
+ * sent. A return value equal to *nb_pkts* means that all packets are valid and
+ * ready to be sent, otherwise stops processing on the first invalid packet and
+ * leaves the rest packets untouched.
+ *
+ * When this functionality is not implemented in the driver, all packets are
+ * are returned untouched.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * The value must be a valid port id.
+ * @param queue_id
+ * The index of the transmit queue through which output packets must be
+ * sent.
+ * The value must be in the range [0, nb_tx_queue - 1] previously supplied
+ * to rte_eth_dev_configure().
+ * @param tx_pkts
+ * The address of an array of *nb_pkts* pointers to *rte_mbuf* structures
+ * which contain the output packets.
+ * @param nb_pkts
+ * The maximum number of packets to process.
+ * @return
+ * The number of packets correct and ready to be sent. The return value can be
+ * less than the value of the *tx_pkts* parameter when some packet doesn't
+ * meet devices requirements with rte_errno set appropriately:
+ * - -EINVAL: offload flags are not correctly set
+ * - -ENOTSUP: the offload feature is not supported by the hardware
+ *
+ */
+
+#ifndef RTE_ETHDEV_TX_PREPARE_NOOP
+
+static inline uint16_t
+rte_eth_tx_prepare(uint8_t port_id, uint16_t queue_id,
+ struct rte_mbuf **tx_pkts, uint16_t nb_pkts)
+{
+ struct rte_eth_dev *dev;
+
+#ifdef RTE_LIBRTE_ETHDEV_DEBUG
+ if (!rte_eth_dev_is_valid_port(port_id)) {
+ RTE_PMD_DEBUG_TRACE("Invalid TX port_id=%d\n", port_id);
+ rte_errno = -EINVAL;
+ return 0;
+ }
+#endif
+
+ dev = &rte_eth_devices[port_id];
+
+#ifdef RTE_LIBRTE_ETHDEV_DEBUG
+ if (queue_id >= dev->data->nb_tx_queues) {
+ RTE_PMD_DEBUG_TRACE("Invalid TX queue_id=%d\n", queue_id);
+ rte_errno = -EINVAL;
+ return 0;
+ }
+#endif
+
+ if (!dev->tx_pkt_prepare)
+ return nb_pkts;
+
+ return (*dev->tx_pkt_prepare)(dev->data->tx_queues[queue_id],
+ tx_pkts, nb_pkts);
+}
+
+#else
+
+/*
+ * Native NOOP operation for compilation targets which doesn't require any
+ * preparations steps, and functional NOOP may introduce unnecessary performance
+ * drop.
+ *
+ * Generally this is not a good idea to turn it on globally and didn't should
+ * be used if behavior of tx_preparation can change.
+ */
+
+static inline uint16_t
+rte_eth_tx_prepare(__rte_unused uint8_t port_id, __rte_unused uint16_t queue_id,
+ __rte_unused struct rte_mbuf **tx_pkts, uint16_t nb_pkts)
+{
+ return nb_pkts;
+}
+
+#endif
+
typedef void (*buffer_tx_error_fn)(struct rte_mbuf **unsent, uint16_t count,
void *userdata);
rte_eth_tx_buffer_count_callback(struct rte_mbuf **pkts, uint16_t unsent,
void *userdata);
+/**
+ * Request the driver to free mbufs currently cached by the driver. The
+ * driver will only free the mbuf if it is no longer in use. It is the
+ * application's responsibity to ensure rte_eth_tx_buffer_flush(..) is
+ * called if needed.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param queue_id
+ * The index of the transmit queue through which output packets must be
+ * sent.
+ * The value must be in the range [0, nb_tx_queue - 1] previously supplied
+ * to rte_eth_dev_configure().
+ * @param free_cnt
+ * Maximum number of packets to free. Use 0 to indicate all possible packets
+ * should be freed. Note that a packet may be using multiple mbufs.
+ * @return
+ * Failure: < 0
+ * -ENODEV: Invalid interface
+ * -ENOTSUP: Driver does not support function
+ * Success: >= 0
+ * 0-n: Number of packets freed. More packets may still remain in ring that
+ * are in use.
+ */
+int
+rte_eth_tx_done_cleanup(uint8_t port_id, uint16_t queue_id, uint32_t free_cnt);
+
/**
* The eth device event type for interrupt, and maybe others in the future.
*/
RTE_ETH_EVENT_INTR_RESET,
/**< reset interrupt event, sent to VF on PF reset */
RTE_ETH_EVENT_VF_MBOX, /**< message from the VF received by PF */
+ RTE_ETH_EVENT_MACSEC, /**< MACsec offload related event */
RTE_ETH_EVENT_MAX /**< max value of this enum */
};
*/
int rte_eth_dev_uc_all_hash_table_set(uint8_t port,uint8_t on);
- /**
- * Set RX L2 Filtering mode of a VF of an Ethernet device.
- *
- * @param port
- * The port identifier of the Ethernet device.
- * @param vf
- * VF id.
- * @param rx_mode
- * The RX mode mask, which is one or more of accepting Untagged Packets,
- * packets that match the PFUTA table, Broadcast and Multicast Promiscuous.
- * ETH_VMDQ_ACCEPT_UNTAG,ETH_VMDQ_ACCEPT_HASH_UC,
- * ETH_VMDQ_ACCEPT_BROADCAST and ETH_VMDQ_ACCEPT_MULTICAST will be used
- * in rx_mode.
- * @param on
- * 1 - Enable a VF RX mode.
- * 0 - Disable a VF RX mode.
- * @return
- * - (0) if successful.
- * - (-ENOTSUP) if hardware doesn't support.
- * - (-ENOTSUP) if hardware doesn't support.
- * - (-EINVAL) if bad parameter.
- */
-int rte_eth_dev_set_vf_rxmode(uint8_t port, uint16_t vf, uint16_t rx_mode,
- uint8_t on);
-
-/**
-* Enable or disable a VF traffic transmit of the Ethernet device.
-*
-* @param port
-* The port identifier of the Ethernet device.
-* @param vf
-* VF id.
-* @param on
-* 1 - Enable a VF traffic transmit.
-* 0 - Disable a VF traffic transmit.
-* @return
-* - (0) if successful.
-* - (-ENODEV) if *port_id* invalid.
-* - (-ENOTSUP) if hardware doesn't support.
-* - (-EINVAL) if bad parameter.
-*/
-int
-rte_eth_dev_set_vf_tx(uint8_t port,uint16_t vf, uint8_t on);
-
-/**
-* Enable or disable a VF traffic receive of an Ethernet device.
-*
-* @param port
-* The port identifier of the Ethernet device.
-* @param vf
-* VF id.
-* @param on
-* 1 - Enable a VF traffic receive.
-* 0 - Disable a VF traffic receive.
-* @return
-* - (0) if successful.
-* - (-ENOTSUP) if hardware doesn't support.
-* - (-ENODEV) if *port_id* invalid.
-* - (-EINVAL) if bad parameter.
-*/
-int
-rte_eth_dev_set_vf_rx(uint8_t port,uint16_t vf, uint8_t on);
-
-/**
-* Enable/Disable hardware VF VLAN filtering by an Ethernet device of
-* received VLAN packets tagged with a given VLAN Tag Identifier.
-*
-* @param port id
-* The port identifier of the Ethernet device.
-* @param vlan_id
-* The VLAN Tag Identifier whose filtering must be enabled or disabled.
-* @param vf_mask
-* Bitmap listing which VFs participate in the VLAN filtering.
-* @param vlan_on
-* 1 - Enable VFs VLAN filtering.
-* 0 - Disable VFs VLAN filtering.
-* @return
-* - (0) if successful.
-* - (-ENOTSUP) if hardware doesn't support.
-* - (-ENODEV) if *port_id* invalid.
-* - (-EINVAL) if bad parameter.
-*/
-int
-rte_eth_dev_set_vf_vlan_filter(uint8_t port, uint16_t vlan_id,
- uint64_t vf_mask,
- uint8_t vlan_on);
-
/**
* Set a traffic mirroring rule on an Ethernet device
*
int rte_eth_set_queue_rate_limit(uint8_t port_id, uint16_t queue_idx,
uint16_t tx_rate);
-/**
- * Set the rate limitation for a vf on an Ethernet device.
- *
- * @param port_id
- * The port identifier of the Ethernet device.
- * @param vf
- * VF id.
- * @param tx_rate
- * The tx rate allocated from the total link speed for this VF id.
- * @param q_msk
- * The queue mask which need to set the rate.
- * @return
- * - (0) if successful.
- * - (-ENOTSUP) if hardware doesn't support this feature.
- * - (-ENODEV) if *port_id* invalid.
- * - (-EINVAL) if bad parameter.
- */
-int rte_eth_set_vf_rate_limit(uint8_t port_id, uint16_t vf,
- uint16_t tx_rate, uint64_t q_msk);
-
/**
* Initialize bypass logic. This function needs to be called before
* executing any other bypass API.
* The packets with this UDP port will be identified as this type of tunnel.
* Before enabling any offloading function for a tunnel, users can call this API
* to change or add more UDP port for the tunnel. So the offloading function
- * can take effect on the packets with the sepcific UDP port.
+ * can take effect on the packets with the specific UDP port.
*
* @param port_id
* The port identifier of the Ethernet device.
* any more.
* Before enabling any offloading function for a tunnel, users can call this API
* to delete a UDP port for the tunnel. So the offloading function will not take
- * effect on the packets with the sepcific UDP port.
+ * effect on the packets with the specific UDP port.
*
* @param port_id
* The port identifier of the Ethernet device.
git.droids-corp.org / dpdk.git / blobdiff