#include <rte_pci.h>
#include <rte_mbuf.h>
#include "rte_ether.h"
+#include "rte_eth_ctrl.h"
/**
* A structure used to retrieve statistics for an Ethernet port.
#define ETH_LINK_SPEED_100 100 /**< 100 megabits/second. */
#define ETH_LINK_SPEED_1000 1000 /**< 1 gigabits/second. */
#define ETH_LINK_SPEED_10000 10000 /**< 10 gigabits/second. */
+#define ETH_LINK_SPEED_10G 10000 /**< alias of 10 gigabits/second. */
+#define ETH_LINK_SPEED_20G 20000 /**< 20 gigabits/second. */
+#define ETH_LINK_SPEED_40G 40000 /**< 40 gigabits/second. */
#define ETH_LINK_AUTONEG_DUPLEX 0 /**< Auto-negotiate duplex. */
#define ETH_LINK_HALF_DUPLEX 1 /**< Half-duplex connection. */
hw_vlan_strip : 1, /**< VLAN strip enable. */
hw_vlan_extend : 1, /**< Extended VLAN enable. */
jumbo_frame : 1, /**< Jumbo Frame Receipt enable. */
- hw_strip_crc : 1; /**< Enable CRC stripping by hardware. */
+ hw_strip_crc : 1, /**< Enable CRC stripping by hardware. */
+ enable_scatter : 1; /**< Enable scatter packets rx handler */
};
/**
* A structure used to configure the Receive Side Scaling (RSS) feature
* of an Ethernet port.
* If not NULL, the *rss_key* pointer of the *rss_conf* structure points
- * to an array of 40 bytes holding the RSS key to use for hashing specific
- * header fields of received packets.
- * Otherwise, a default random hash key is used by the device driver.
+ * to an array holding the RSS key to use for hashing specific header
+ * fields of received packets. The length of this array should be indicated
+ * by *rss_key_len* below. Otherwise, a default random hash key is used by
+ * the device driver.
+ *
+ * The *rss_key_len* field of the *rss_conf* structure indicates the length
+ * in bytes of the array pointed by *rss_key*. To be compatible, this length
+ * will be checked in i40e only. Others assume 40 bytes to be used as before.
*
* The *rss_hf* field of the *rss_conf* structure indicates the different
* types of IPv4/IPv6 packets to which the RSS hashing must be applied.
* Supplying an *rss_hf* equal to zero disables the RSS feature.
*/
struct rte_eth_rss_conf {
- uint8_t *rss_key; /**< If not NULL, 40-byte hash key. */
- uint16_t rss_hf; /**< Hash functions to apply - see below. */
+ uint8_t *rss_key; /**< If not NULL, 40-byte hash key. */
+ uint8_t rss_key_len; /**< hash key length in bytes. */
+ uint64_t rss_hf; /**< Hash functions to apply - see below. */
};
-#define ETH_RSS_IPV4 0x0001 /**< IPv4 packet. */
-#define ETH_RSS_IPV4_TCP 0x0002 /**< IPv4/TCP packet. */
-#define ETH_RSS_IPV6 0x0004 /**< IPv6 packet. */
-#define ETH_RSS_IPV6_EX 0x0008 /**< IPv6 packet with extension headers.*/
-#define ETH_RSS_IPV6_TCP 0x0010 /**< IPv6/TCP packet. */
-#define ETH_RSS_IPV6_TCP_EX 0x0020 /**< IPv6/TCP with extension headers. */
-/* Intel RSS extensions to UDP packets */
-#define ETH_RSS_IPV4_UDP 0x0040 /**< IPv4/UDP packet. */
-#define ETH_RSS_IPV6_UDP 0x0080 /**< IPv6/UDP packet. */
-#define ETH_RSS_IPV6_UDP_EX 0x0100 /**< IPv6/UDP with extension headers. */
-
-#define ETH_RSS_PROTO_MASK 0x01FF /**< Mask of valid RSS hash protocols */
+/* Supported RSS offloads */
+/* for 1G & 10G */
+#define ETH_RSS_IPV4_SHIFT 0
+#define ETH_RSS_IPV4_TCP_SHIFT 1
+#define ETH_RSS_IPV6_SHIFT 2
+#define ETH_RSS_IPV6_EX_SHIFT 3
+#define ETH_RSS_IPV6_TCP_SHIFT 4
+#define ETH_RSS_IPV6_TCP_EX_SHIFT 5
+#define ETH_RSS_IPV4_UDP_SHIFT 6
+#define ETH_RSS_IPV6_UDP_SHIFT 7
+#define ETH_RSS_IPV6_UDP_EX_SHIFT 8
+/* for 40G only */
+#define ETH_RSS_NONF_IPV4_UDP_SHIFT 31
+#define ETH_RSS_NONF_IPV4_TCP_SHIFT 33
+#define ETH_RSS_NONF_IPV4_SCTP_SHIFT 34
+#define ETH_RSS_NONF_IPV4_OTHER_SHIFT 35
+#define ETH_RSS_FRAG_IPV4_SHIFT 36
+#define ETH_RSS_NONF_IPV6_UDP_SHIFT 41
+#define ETH_RSS_NONF_IPV6_TCP_SHIFT 43
+#define ETH_RSS_NONF_IPV6_SCTP_SHIFT 44
+#define ETH_RSS_NONF_IPV6_OTHER_SHIFT 45
+#define ETH_RSS_FRAG_IPV6_SHIFT 46
+#define ETH_RSS_FCOE_OX_SHIFT 48
+#define ETH_RSS_FCOE_RX_SHIFT 49
+#define ETH_RSS_FCOE_OTHER_SHIFT 50
+#define ETH_RSS_L2_PAYLOAD_SHIFT 63
+
+/* for 1G & 10G */
+#define ETH_RSS_IPV4 (1 << ETH_RSS_IPV4_SHIFT)
+#define ETH_RSS_IPV4_TCP (1 << ETH_RSS_IPV4_TCP_SHIFT)
+#define ETH_RSS_IPV6 (1 << ETH_RSS_IPV6_SHIFT)
+#define ETH_RSS_IPV6_EX (1 << ETH_RSS_IPV6_EX_SHIFT)
+#define ETH_RSS_IPV6_TCP (1 << ETH_RSS_IPV6_TCP_SHIFT)
+#define ETH_RSS_IPV6_TCP_EX (1 << ETH_RSS_IPV6_TCP_EX_SHIFT)
+#define ETH_RSS_IPV4_UDP (1 << ETH_RSS_IPV4_UDP_SHIFT)
+#define ETH_RSS_IPV6_UDP (1 << ETH_RSS_IPV6_UDP_SHIFT)
+#define ETH_RSS_IPV6_UDP_EX (1 << ETH_RSS_IPV6_UDP_EX_SHIFT)
+/* for 40G only */
+#define ETH_RSS_NONF_IPV4_UDP (1ULL << ETH_RSS_NONF_IPV4_UDP_SHIFT)
+#define ETH_RSS_NONF_IPV4_TCP (1ULL << ETH_RSS_NONF_IPV4_TCP_SHIFT)
+#define ETH_RSS_NONF_IPV4_SCTP (1ULL << ETH_RSS_NONF_IPV4_SCTP_SHIFT)
+#define ETH_RSS_NONF_IPV4_OTHER (1ULL << ETH_RSS_NONF_IPV4_OTHER_SHIFT)
+#define ETH_RSS_FRAG_IPV4 (1ULL << ETH_RSS_FRAG_IPV4_SHIFT)
+#define ETH_RSS_NONF_IPV6_UDP (1ULL << ETH_RSS_NONF_IPV6_UDP_SHIFT)
+#define ETH_RSS_NONF_IPV6_TCP (1ULL << ETH_RSS_NONF_IPV6_TCP_SHIFT)
+#define ETH_RSS_NONF_IPV6_SCTP (1ULL << ETH_RSS_NONF_IPV6_SCTP_SHIFT)
+#define ETH_RSS_NONF_IPV6_OTHER (1ULL << ETH_RSS_NONF_IPV6_OTHER_SHIFT)
+#define ETH_RSS_FRAG_IPV6 (1ULL << ETH_RSS_FRAG_IPV6_SHIFT)
+/* FCOE relevant should not be used */
+#define ETH_RSS_FCOE_OX (1ULL << ETH_RSS_FCOE_OX_SHIFT)
+#define ETH_RSS_FCOE_RX (1ULL << ETH_RSS_FCOE_RX_SHIFT)
+#define ETH_RSS_FCOE_OTHER (1ULL << ETH_RSS_FCOE_OTHER_SHIFT)
+#define ETH_RSS_L2_PAYLOAD (1ULL << ETH_RSS_L2_PAYLOAD_SHIFT)
+
+#define ETH_RSS_IP ( \
+ ETH_RSS_IPV4 | \
+ ETH_RSS_IPV6 | \
+ ETH_RSS_NONF_IPV4_OTHER | \
+ ETH_RSS_FRAG_IPV4 | \
+ ETH_RSS_NONF_IPV6_OTHER | \
+ ETH_RSS_FRAG_IPV6)
+#define ETH_RSS_UDP ( \
+ ETH_RSS_IPV4 | \
+ ETH_RSS_IPV6 | \
+ ETH_RSS_IPV4_UDP | \
+ ETH_RSS_IPV6_UDP | \
+ ETH_RSS_IPV6_UDP_EX | \
+ ETH_RSS_NONF_IPV4_UDP | \
+ ETH_RSS_NONF_IPV6_UDP)
+/**< Mask of valid RSS hash protocols */
+#define ETH_RSS_PROTO_MASK ( \
+ ETH_RSS_IPV4 | \
+ ETH_RSS_IPV4_TCP | \
+ ETH_RSS_IPV6 | \
+ ETH_RSS_IPV6_EX | \
+ ETH_RSS_IPV6_TCP | \
+ ETH_RSS_IPV6_TCP_EX | \
+ ETH_RSS_IPV4_UDP | \
+ ETH_RSS_IPV6_UDP | \
+ ETH_RSS_IPV6_UDP_EX | \
+ ETH_RSS_NONF_IPV4_UDP | \
+ ETH_RSS_NONF_IPV4_TCP | \
+ ETH_RSS_NONF_IPV4_SCTP | \
+ ETH_RSS_NONF_IPV4_OTHER | \
+ ETH_RSS_FRAG_IPV4 | \
+ ETH_RSS_NONF_IPV6_UDP | \
+ ETH_RSS_NONF_IPV6_TCP | \
+ ETH_RSS_NONF_IPV6_SCTP | \
+ ETH_RSS_NONF_IPV6_OTHER | \
+ ETH_RSS_FRAG_IPV6 | \
+ ETH_RSS_L2_PAYLOAD)
+
/* Definitions used for redirection table entry size */
#define ETH_RSS_RETA_NUM_ENTRIES 128
#define ETH_RSS_RETA_MAX_QUEUE 16
/* Definitions used for receive MAC address */
#define ETH_NUM_RECEIVE_MAC_ADDR 128 /**< Maximum nb. of receive mac addr. */
-
/* Definitions used for unicast hash */
#define ETH_VMDQ_NUM_UC_HASH_ARRAY 128 /**< Maximum nb. of UC hash array. */
*/
struct rte_eth_txmode {
enum rte_eth_tx_mq_mode mq_mode; /**< TX multi-queues mode. */
+
+ /* For i40e specifically */
+ uint16_t pvid;
+ uint8_t hw_vlan_reject_tagged : 1,
+ /**< If set, reject sending out tagged pkts */
+ hw_vlan_reject_untagged : 1,
+ /**< If set, reject sending out untagged pkts */
+ hw_vlan_insert_pvid : 1;
+ /**< If set, enable port based VLAN insertion */
};
/**
struct rte_eth_thresh rx_thresh; /**< RX ring threshold registers. */
uint16_t rx_free_thresh; /**< Drives the freeing of RX descriptors. */
uint8_t rx_drop_en; /**< Drop packets if no descriptors are available. */
- uint8_t start_rx_per_q; /**< start rx per queue. */
+ uint8_t rx_deferred_start; /**< Do not start queue with rte_eth_dev_start(). */
};
#define ETH_TXQ_FLAGS_NOMULTSEGS 0x0001 /**< nb_segs=1 for all mbufs */
uint16_t tx_rs_thresh; /**< Drives the setting of RS bit on TXDs. */
uint16_t tx_free_thresh; /**< Drives the freeing of TX buffers. */
uint32_t txq_flags; /**< Set flags for the Tx queue */
- uint8_t start_tx_per_q; /**< start tx per queue. */
+ uint8_t tx_deferred_start; /**< Do not start queue with rte_eth_dev_start(). */
};
/**
uint16_t send_xon; /**< Is XON frame need be sent */
enum rte_eth_fc_mode mode; /**< Link flow control mode */
uint8_t mac_ctrl_frame_fwd; /**< Forward MAC control frames */
+ uint8_t autoneg; /**< Use Pause autoneg */
};
/**
uint16_t max_vmdq_pools; /**< Maximum number of VMDq pools. */
uint32_t rx_offload_capa; /**< Device RX offload capabilities. */
uint32_t tx_offload_capa; /**< Device TX offload capabilities. */
+ struct rte_eth_rxconf default_rxconf; /**< Default RX configuration */
+ struct rte_eth_txconf default_txconf; /**< Default TX configuration */
+};
+
+/** Maximum name length for extended statistics counters */
+#define RTE_ETH_XSTATS_NAME_SIZE 64
+
+/**
+ * An Ethernet device extended statistic structure
+ *
+ * This structure is used by ethdev->eth_xstats_get() to provide
+ * statistics that are not provided in the generic rte_eth_stats
+ * structure.
+ */
+struct rte_eth_xstats {
+ char name[RTE_ETH_XSTATS_NAME_SIZE];
+ uint64_t value;
};
struct rte_eth_dev;
typedef void (*eth_stats_reset_t)(struct rte_eth_dev *dev);
/**< @internal Reset global I/O statistics of an Ethernet device to 0. */
+typedef int (*eth_xstats_get_t)(struct rte_eth_dev *dev,
+ struct rte_eth_xstats *stats, unsigned n);
+/**< @internal Get extended stats of an Ethernet device. */
+
+typedef void (*eth_xstats_reset_t)(struct rte_eth_dev *dev);
+/**< @internal Reset extended stats of an Ethernet device. */
+
typedef int (*eth_queue_stats_mapping_set_t)(struct rte_eth_dev *dev,
uint16_t queue_id,
uint8_t stat_idx,
typedef int (*eth_rx_descriptor_done_t)(void *rxq, uint16_t offset);
/**< @Check DD bit of specific RX descriptor */
+typedef int (*mtu_set_t)(struct rte_eth_dev *dev, uint16_t mtu);
+/**< @internal Set MTU. */
+
typedef int (*vlan_filter_set_t)(struct rte_eth_dev *dev,
uint16_t vlan_id,
int on);
typedef void (*vlan_offload_set_t)(struct rte_eth_dev *dev, int mask);
/**< @internal set VLAN offload function by an Ethernet device. */
+typedef int (*vlan_pvid_set_t)(struct rte_eth_dev *dev,
+ uint16_t vlan_id,
+ int on);
+/**< @internal set port based TX VLAN insertion by an Ethernet device. */
+
typedef void (*vlan_strip_queue_set_t)(struct rte_eth_dev *dev,
uint16_t rx_queue_id,
int on);
struct rte_fdir_masks *fdir_masks);
/**< @internal Setup flow director masks on an Ethernet device */
+typedef int (*flow_ctrl_get_t)(struct rte_eth_dev *dev,
+ struct rte_eth_fc_conf *fc_conf);
+/**< @internal Get current flow control parameter on an Ethernet device */
+
typedef int (*flow_ctrl_set_t)(struct rte_eth_dev *dev,
- struct rte_eth_fc_conf *fc_conf);
+ struct rte_eth_fc_conf *fc_conf);
/**< @internal Setup flow control parameter on an Ethernet device */
typedef int (*priority_flow_ctrl_set_t)(struct rte_eth_dev *dev,
uint16_t *rx_queue);
/**< @internal Get a flex filter rule on an Ethernet device */
+typedef int (*eth_filter_ctrl_t)(struct rte_eth_dev *dev,
+ enum rte_filter_type filter_type,
+ enum rte_filter_op filter_op,
+ void *arg);
+/**< @internal Take operations to assigned filter type on an Ethernet device */
+
/**
* @internal A structure containing the functions exported by an Ethernet driver.
*/
eth_allmulticast_enable_t allmulticast_enable;/**< RX multicast ON. */
eth_allmulticast_disable_t allmulticast_disable;/**< RX multicast OF. */
eth_link_update_t link_update; /**< Get device link state. */
- eth_stats_get_t stats_get; /**< Get device statistics. */
- eth_stats_reset_t stats_reset; /**< Reset device statistics. */
+ eth_stats_get_t stats_get; /**< Get generic device statistics. */
+ eth_stats_reset_t stats_reset; /**< Reset generic device statistics. */
+ eth_xstats_get_t xstats_get; /**< Get extended device statistics. */
+ eth_xstats_reset_t xstats_reset; /**< Reset extended device statistics. */
eth_queue_stats_mapping_set_t queue_stats_mapping_set;
/**< Configure per queue stat counter mapping. */
eth_dev_infos_get_t dev_infos_get; /**< Get device info. */
+ mtu_set_t mtu_set; /**< Set MTU. */
vlan_filter_set_t vlan_filter_set; /**< Filter VLAN Setup. */
vlan_tpid_set_t vlan_tpid_set; /**< Outer VLAN TPID Setup. */
vlan_strip_queue_set_t vlan_strip_queue_set; /**< VLAN Stripping on queue. */
vlan_offload_set_t vlan_offload_set; /**< Set VLAN Offload. */
+ vlan_pvid_set_t vlan_pvid_set; /**< Set port based TX VLAN insertion */
eth_queue_start_t rx_queue_start;/**< Start RX for a queue.*/
eth_queue_stop_t rx_queue_stop;/**< Stop RX for a queue.*/
eth_queue_start_t tx_queue_start;/**< Start TX for a queue.*/
eth_queue_release_t tx_queue_release;/**< Release TX queue.*/
eth_dev_led_on_t dev_led_on; /**< Turn on LED. */
eth_dev_led_off_t dev_led_off; /**< Turn off LED. */
+ flow_ctrl_get_t flow_ctrl_get; /**< Get flow control. */
flow_ctrl_set_t flow_ctrl_set; /**< Setup flow control. */
priority_flow_ctrl_set_t priority_flow_ctrl_set; /**< Setup priority flow control.*/
eth_mac_addr_remove_t mac_addr_remove; /**< Remove MAC address */
eth_add_flex_filter_t add_flex_filter; /**< add flex filter. */
eth_remove_flex_filter_t remove_flex_filter; /**< remove flex filter. */
eth_get_flex_filter_t get_flex_filter; /**< get flex filter. */
+ eth_filter_ctrl_t filter_ctrl; /**< common filter control*/
};
/**
};
#define RTE_ETH_DEV_SRIOV(dev) ((dev)->data->sriov)
+#define RTE_ETH_NAME_MAX_LEN (32)
+
/**
* @internal
* The data part, with no function pointers, associated with each ethernet device.
* processes in a multi-process configuration.
*/
struct rte_eth_dev_data {
+ char name[RTE_ETH_NAME_MAX_LEN]; /**< Unique identifier name */
+
void **rx_queues; /**< Array of pointers to RX queues. */
void **tx_queues; /**< Array of pointers to TX queues. */
uint16_t nb_rx_queues; /**< Number of RX queues. */
/**< Link-level information & status */
struct rte_eth_conf dev_conf; /**< Configuration applied to device. */
- uint16_t max_frame_size; /**< Default is ETHER_MAX_LEN (1518). */
+ uint16_t mtu; /**< Maximum Transmission Unit. */
+
+ uint32_t min_rx_buf_size;
+ /**< Common rx buffer size handled by all queues */
uint64_t rx_mbuf_alloc_failed; /**< RX ring mbuf allocation failures. */
struct ether_addr* mac_addrs;/**< Device Ethernet Link address. */
* Allocates a new ethdev slot for an ethernet device and returns the pointer
* to that slot for the driver to use.
*
+ * @param name Unique identifier name for each Ethernet device
* @return
* - Slot in the rte_dev_devices array for a new device;
*/
-struct rte_eth_dev *rte_eth_dev_allocate(void);
+struct rte_eth_dev *rte_eth_dev_allocate(const char *name);
struct eth_driver;
/**
* the DMA memory allocated for the receive descriptors of the ring.
* @param rx_conf
* The pointer to the configuration data to be used for the receive queue.
+ * NULL value is allowed, in which case default RX configuration
+ * will be used.
* The *rx_conf* structure contains an *rx_thresh* structure with the values
* of the Prefetch, Host, and Write-Back threshold registers of the receive
* ring.
* the DMA memory allocated for the transmit descriptors of the ring.
* @param tx_conf
* The pointer to the configuration data to be used for the transmit queue.
+ * NULL value is allowed, in which case default RX configuration
+ * will be used.
* The *tx_conf* structure contains the following data:
* - The *tx_thresh* structure with the values of the Prefetch, Host, and
* Write-Back threshold registers of the transmit ring.
extern int rte_eth_dev_socket_id(uint8_t port_id);
/*
- * Start specified RX queue of a port
+ * Allocate mbuf from mempool, setup the DMA physical address
+ * and then start RX for specified queue of a port. It is used
+ * when rx_deferred_start flag of the specified queue is true.
*
* @param port_id
* The port identifier of the Ethernet device
extern int rte_eth_dev_rx_queue_stop(uint8_t port_id, uint16_t rx_queue_id);
/*
- * Start specified TX queue of a port
+ * Start TX for specified queue of a port. It is used when tx_deferred_start
+ * flag of the specified queue is true.
*
* @param port_id
* The port identifier of the Ethernet device
*/
extern void rte_eth_stats_reset(uint8_t port_id);
+/**
+ * Retrieve extended statistics of an Ethernet device.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param xstats
+ * A pointer to a table of structure of type *rte_eth_xstats*
+ * to be filled with device statistics names and values.
+ * This parameter can be set to NULL if n is 0.
+ * @param n
+ * The size of the stats table, which should be large enough to store
+ * all the statistics of the device.
+ * @return
+ * - positive value lower or equal to n: success. The return value
+ * is the number of entries filled in the stats table.
+ * - positive value higher than n: error, the given statistics table
+ * is too small. The return value corresponds to the size that should
+ * be given to succeed. The entries in the table are not valid and
+ * shall not be used by the caller.
+ * - negative value on error (invalid port id)
+ */
+extern int rte_eth_xstats_get(uint8_t port_id,
+ struct rte_eth_xstats *xstats, unsigned n);
+
+/**
+ * Reset extended statistics of an Ethernet device.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ */
+extern void rte_eth_xstats_reset(uint8_t port_id);
+
/**
* Set a mapping for the specified transmit queue to the specified per-queue
* statistics counter.
extern void rte_eth_dev_info_get(uint8_t port_id,
struct rte_eth_dev_info *dev_info);
+/**
+ * Retrieve the MTU of an Ethernet device.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param mtu
+ * A pointer to a uint16_t where the retrieved MTU is to be stored.
+ * @return
+ * - (0) if successful.
+ * - (-ENODEV) if *port_id* invalid.
+ */
+extern int rte_eth_dev_get_mtu(uint8_t port_id, uint16_t *mtu);
+
+/**
+ * Change the MTU of an Ethernet device.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param mtu
+ * A uint16_t for the MTU to be applied.
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if operation is not supported.
+ * - (-ENODEV) if *port_id* invalid.
+ * - (-EINVAL) if *mtu* invalid.
+ */
+extern int rte_eth_dev_set_mtu(uint8_t port_id, uint16_t mtu);
+
/**
* Enable/Disable hardware filtering by an Ethernet device of received
* VLAN packets tagged with a given VLAN Tag Identifier.
/**
* Enable/Disable hardware VLAN Strip by a rx queue of an Ethernet device.
- * 82599/X540 can support VLAN stripping at the rx queue level
+ * 82599/X540/X550 can support VLAN stripping at the rx queue level
*
* @param port_id
* The port identifier of the Ethernet device.
*/
extern int rte_eth_dev_get_vlan_offload(uint8_t port_id);
+/**
+ * Set port based TX VLAN insersion on or off.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param pvid
+ * Port based TX VLAN identifier togeth with user priority.
+ * @param on
+ * Turn on or off the port based TX VLAN insertion.
+ *
+ * @return
+ * - (0) if successful.
+ * - negative if failed.
+ */
+extern int rte_eth_dev_set_vlan_pvid(uint8_t port_id, uint16_t pvid, int on);
+
/**
*
* Retrieve a burst of input packets from a receive queue of an Ethernet
*/
int rte_eth_led_off(uint8_t port_id);
+/**
+ * Get current status of the Ethernet link flow control for Ethernet device
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param fc_conf
+ * The pointer to the structure where to store the flow control parameters.
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if hardware doesn't support flow control.
+ * - (-ENODEV) if *port_id* invalid.
+ */
+int rte_eth_dev_flow_ctrl_get(uint8_t port_id,
+ struct rte_eth_fc_conf *fc_conf);
+
/**
* Configure the Ethernet link flow control for Ethernet device
*
* - (-EIO) if flow control setup failure
*/
int rte_eth_dev_flow_ctrl_set(uint8_t port_id,
- struct rte_eth_fc_conf *fc_conf);
+ struct rte_eth_fc_conf *fc_conf);
/**
* Configure the Ethernet priority flow control under DCB environment
int rte_eth_dev_get_flex_filter(uint8_t port_id, uint16_t index,
struct rte_flex_filter *filter, uint16_t *rx_queue);
+/**
+ * Check whether the filter type is supported on an Ethernet device.
+ * All the supported filter types are defined in 'rte_eth_ctrl.h'.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param filter_type
+ * Filter type.
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if hardware doesn't support this filter type.
+ * - (-ENODEV) if *port_id* invalid.
+ */
+int rte_eth_dev_filter_supported(uint8_t port_id, enum rte_filter_type filter_type);
+
+/**
+ * Take operations to assigned filter type on an Ethernet device.
+ * All the supported operations and filter types are defined in 'rte_eth_ctrl.h'.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param filter_type
+ * Filter type.
+ * @param filter_op
+ * Type of operation.
+ * @param arg
+ * A pointer to arguments defined specifically for the operation.
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if hardware doesn't support.
+ * - (-ENODEV) if *port_id* invalid.
+ * - others depends on the specific operations implementation.
+ */
+int rte_eth_dev_filter_ctrl(uint8_t port_id, enum rte_filter_type filter_type,
+ enum rte_filter_op filter_op, void *arg);
+
#ifdef __cplusplus
}
#endif
git.droids-corp.org / dpdk.git / blobdiff