typedef int (*eth_rx_descriptor_done_t)(void *rxq, uint16_t offset);
/**< @internal Check DD bit of specific RX descriptor */
+typedef int (*eth_rx_descriptor_status_t)(void *rxq, uint16_t offset);
+/**< @internal Check the status of a Rx descriptor */
+
+typedef int (*eth_tx_descriptor_status_t)(void *txq, uint16_t offset);
+/**< @internal Check the status of a Tx descriptor */
+
typedef int (*eth_fw_version_get_t)(struct rte_eth_dev *dev,
char *fw_version, size_t fw_size);
/**< @internal Get firmware information of an Ethernet device. */
eth_rx_queue_count_t rx_queue_count;
/**< Get the number of used RX descriptors. */
eth_rx_descriptor_done_t rx_descriptor_done; /**< Check rxd DD bit. */
+ eth_rx_descriptor_status_t rx_descriptor_status;
+ /**< Check the status of a Rx descriptor. */
+ eth_tx_descriptor_status_t tx_descriptor_status;
+ /**< Check the status of a Tx descriptor. */
eth_rx_enable_intr_t rx_queue_intr_enable; /**< Enable Rx queue interrupt. */
eth_rx_disable_intr_t rx_queue_intr_disable; /**< Disable Rx queue interrupt. */
eth_tx_queue_setup_t tx_queue_setup;/**< Set up device TX queue. */
void *param;
};
+/**
+ * A set of values to describe the possible states of an eth device.
+ */
+enum rte_eth_dev_state {
+ RTE_ETH_DEV_UNUSED = 0,
+ RTE_ETH_DEV_ATTACHED,
+};
+
/**
* @internal
* The generic data structure associated with each ethernet device.
* received packets before passing them to the driver for transmission.
*/
struct rte_eth_rxtx_callback *pre_tx_burst_cbs[RTE_MAX_QUEUES_PER_PORT];
- uint8_t attached; /**< Flag indicating the port is attached */
+ enum rte_eth_dev_state state:8; /**< Flag indicating the port state */
} __rte_cache_aligned;
struct rte_eth_dev_sriov {
*/
extern struct rte_eth_dev rte_eth_devices[];
+/**
+ * Iterates over valid ethdev ports.
+ *
+ * @param port_id
+ * The id of the next possible valid port.
+ * @return
+ * Next valid port id, RTE_MAX_ETHPORTS if there is none.
+ */
+uint8_t rte_eth_find_next(uint8_t port_id);
+
+/**
+ * Macro to iterate over all enabled ethdev ports.
+ */
+#define RTE_ETH_FOREACH_DEV(p) \
+ for (p = rte_eth_find_next(0); \
+ (unsigned int)p < (unsigned int)RTE_MAX_ETHPORTS; \
+ p = rte_eth_find_next(p + 1))
+
+
/**
* Get the total number of Ethernet devices that have been successfully
* initialized by the [matching] Ethernet driver during the PCI probing phase.
* immediately after invoking rte_eal_init().
* If the application unplugs a port using hotplug function, The enabled port
* numbers may be noncontiguous. In the case, the applications need to manage
- * enabled port by themselves.
+ * enabled port by using the ``RTE_ETH_FOREACH_DEV()`` macro.
*
* @return
* - The total number of usable Ethernet devices.
*/
struct rte_eth_dev *rte_eth_dev_allocate(const char *name);
+/**
+ * @internal
+ * Attach to the ethdev already initialized by the primary
+ * process.
+ *
+ * @param name Ethernet device's name.
+ * @return
+ * - Success: Slot in the rte_dev_devices array for attached
+ * device.
+ * - Error: Null pointer.
+ */
+struct rte_eth_dev *rte_eth_dev_attach_secondary(const char *name);
+
/**
* @internal
* Release the specified ethdev port.
dev->data->rx_queues[queue_id], offset);
}
+#define RTE_ETH_RX_DESC_AVAIL 0 /**< Desc available for hw. */
+#define RTE_ETH_RX_DESC_DONE 1 /**< Desc done, filled by hw. */
+#define RTE_ETH_RX_DESC_UNAVAIL 2 /**< Desc used by driver or hw. */
+
+/**
+ * Check the status of a Rx descriptor in the queue
+ *
+ * It should be called in a similar context than the Rx function:
+ * - on a dataplane core
+ * - not concurrently on the same queue
+ *
+ * Since it's a dataplane function, no check is performed on port_id and
+ * queue_id. The caller must therefore ensure that the port is enabled
+ * and the queue is configured and running.
+ *
+ * Note: accessing to a random descriptor in the ring may trigger cache
+ * misses and have a performance impact.
+ *
+ * @param port_id
+ * A valid port identifier of the Ethernet device which.
+ * @param queue_id
+ * A valid Rx queue identifier on this port.
+ * @param offset
+ * The offset of the descriptor starting from tail (0 is the next
+ * packet to be received by the driver).
+ *
+ * @return
+ * - (RTE_ETH_RX_DESC_AVAIL): Descriptor is available for the hardware to
+ * receive a packet.
+ * - (RTE_ETH_RX_DESC_DONE): Descriptor is done, it is filled by hw, but
+ * not yet processed by the driver (i.e. in the receive queue).
+ * - (RTE_ETH_RX_DESC_UNAVAIL): Descriptor is unavailable, either hold by
+ * the driver and not yet returned to hw, or reserved by the hw.
+ * - (-EINVAL) bad descriptor offset.
+ * - (-ENOTSUP) if the device does not support this function.
+ * - (-ENODEV) bad port or queue (only if compiled with debug).
+ */
+static inline int
+rte_eth_rx_descriptor_status(uint8_t port_id, uint16_t queue_id,
+ uint16_t offset)
+{
+ struct rte_eth_dev *dev;
+ void *rxq;
+
+#ifdef RTE_LIBRTE_ETHDEV_DEBUG
+ RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+#endif
+ dev = &rte_eth_devices[port_id];
+#ifdef RTE_LIBRTE_ETHDEV_DEBUG
+ if (queue_id >= dev->data->nb_rx_queues)
+ return -ENODEV;
+#endif
+ RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->rx_descriptor_status, -ENOTSUP);
+ rxq = dev->data->rx_queues[queue_id];
+
+ return (*dev->dev_ops->rx_descriptor_status)(rxq, offset);
+}
+
+#define RTE_ETH_TX_DESC_FULL 0 /**< Desc filled for hw, waiting xmit. */
+#define RTE_ETH_TX_DESC_DONE 1 /**< Desc done, packet is transmitted. */
+#define RTE_ETH_TX_DESC_UNAVAIL 2 /**< Desc used by driver or hw. */
+
+/**
+ * Check the status of a Tx descriptor in the queue.
+ *
+ * It should be called in a similar context than the Tx function:
+ * - on a dataplane core
+ * - not concurrently on the same queue
+ *
+ * Since it's a dataplane function, no check is performed on port_id and
+ * queue_id. The caller must therefore ensure that the port is enabled
+ * and the queue is configured and running.
+ *
+ * Note: accessing to a random descriptor in the ring may trigger cache
+ * misses and have a performance impact.
+ *
+ * @param port_id
+ * A valid port identifier of the Ethernet device which.
+ * @param queue_id
+ * A valid Tx queue identifier on this port.
+ * @param offset
+ * The offset of the descriptor starting from tail (0 is the place where
+ * the next packet will be send).
+ *
+ * @return
+ * - (RTE_ETH_TX_DESC_FULL) Descriptor is being processed by the hw, i.e.
+ * in the transmit queue.
+ * - (RTE_ETH_TX_DESC_DONE) Hardware is done with this descriptor, it can
+ * be reused by the driver.
+ * - (RTE_ETH_TX_DESC_UNAVAIL): Descriptor is unavailable, reserved by the
+ * driver or the hardware.
+ * - (-EINVAL) bad descriptor offset.
+ * - (-ENOTSUP) if the device does not support this function.
+ * - (-ENODEV) bad port or queue (only if compiled with debug).
+ */
+static inline int rte_eth_tx_descriptor_status(uint8_t port_id,
+ uint16_t queue_id, uint16_t offset)
+{
+ struct rte_eth_dev *dev;
+ void *txq;
+
+#ifdef RTE_LIBRTE_ETHDEV_DEBUG
+ RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+#endif
+ dev = &rte_eth_devices[port_id];
+#ifdef RTE_LIBRTE_ETHDEV_DEBUG
+ if (queue_id >= dev->data->nb_tx_queues)
+ return -ENODEV;
+#endif
+ RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->tx_descriptor_status, -ENOTSUP);
+ txq = dev->data->tx_queues[queue_id];
+
+ return (*dev->dev_ops->tx_descriptor_status)(txq, offset);
+}
+
/**
* Send a burst of output packets on a transmit queue of an Ethernet device.
*
int
rte_eth_dev_get_name_by_port(uint8_t port_id, char *name);
-/**
- * @internal
- * Wrapper for use by pci drivers as a .probe function to attach to a ethdev
- * interface.
- */
-int rte_eth_dev_pci_probe(struct rte_pci_driver *pci_drv,
- struct rte_pci_device *pci_dev);
-
-/**
- * @internal
- * Wrapper for use by pci drivers as a .remove function to detach a ethdev
- * interface.
- */
-int rte_eth_dev_pci_remove(struct rte_pci_device *pci_dev);
-
#ifdef __cplusplus
}
#endif
git.droids-corp.org / dpdk.git / blobdiff