* A zeroed mask stands for any number of layers.
*/
struct rte_flow_item_any {
- uint32_t num; /* Number of layers covered. */
+ uint32_t num; /**< Number of layers covered. */
+};
+
+/** Default mask for RTE_FLOW_ITEM_TYPE_ANY. */
+static const struct rte_flow_item_any rte_flow_item_any_mask = {
+ .num = 0x00000000,
};
/**
uint32_t id; /**< Destination VF ID. */
};
+/** Default mask for RTE_FLOW_ITEM_TYPE_VF. */
+static const struct rte_flow_item_vf rte_flow_item_vf_mask = {
+ .id = 0x00000000,
+};
+
/**
* RTE_FLOW_ITEM_TYPE_PORT
*
uint32_t index; /**< Physical port index. */
};
+/** Default mask for RTE_FLOW_ITEM_TYPE_PORT. */
+static const struct rte_flow_item_port rte_flow_item_port_mask = {
+ .index = 0x00000000,
+};
+
/**
* RTE_FLOW_ITEM_TYPE_RAW
*
uint8_t pattern[]; /**< Byte string to look for. */
};
+/** Default mask for RTE_FLOW_ITEM_TYPE_RAW. */
+static const struct rte_flow_item_raw rte_flow_item_raw_mask = {
+ .relative = 1,
+ .search = 1,
+ .reserved = 0x3fffffff,
+ .offset = 0xffffffff,
+ .limit = 0xffff,
+ .length = 0xffff,
+};
+
/**
* RTE_FLOW_ITEM_TYPE_ETH
*
uint16_t type; /**< EtherType. */
};
+/** Default mask for RTE_FLOW_ITEM_TYPE_ETH. */
+static const struct rte_flow_item_eth rte_flow_item_eth_mask = {
+ .dst.addr_bytes = "\xff\xff\xff\xff\xff\xff",
+ .src.addr_bytes = "\xff\xff\xff\xff\xff\xff",
+ .type = 0x0000,
+};
+
/**
* RTE_FLOW_ITEM_TYPE_VLAN
*
uint16_t tci; /**< Tag control information. */
};
+/** Default mask for RTE_FLOW_ITEM_TYPE_VLAN. */
+static const struct rte_flow_item_vlan rte_flow_item_vlan_mask = {
+ .tpid = 0x0000,
+ .tci = 0xffff,
+};
+
/**
* RTE_FLOW_ITEM_TYPE_IPV4
*
struct ipv4_hdr hdr; /**< IPv4 header definition. */
};
+/** Default mask for RTE_FLOW_ITEM_TYPE_IPV4. */
+static const struct rte_flow_item_ipv4 rte_flow_item_ipv4_mask = {
+ .hdr = {
+ .src_addr = 0xffffffff,
+ .dst_addr = 0xffffffff,
+ },
+};
+
/**
* RTE_FLOW_ITEM_TYPE_IPV6.
*
struct ipv6_hdr hdr; /**< IPv6 header definition. */
};
+/** Default mask for RTE_FLOW_ITEM_TYPE_IPV6. */
+static const struct rte_flow_item_ipv6 rte_flow_item_ipv6_mask = {
+ .hdr = {
+ .src_addr =
+ "\xff\xff\xff\xff\xff\xff\xff\xff"
+ "\xff\xff\xff\xff\xff\xff\xff\xff",
+ .dst_addr =
+ "\xff\xff\xff\xff\xff\xff\xff\xff"
+ "\xff\xff\xff\xff\xff\xff\xff\xff",
+ },
+};
+
/**
* RTE_FLOW_ITEM_TYPE_ICMP.
*
struct icmp_hdr hdr; /**< ICMP header definition. */
};
+/** Default mask for RTE_FLOW_ITEM_TYPE_ICMP. */
+static const struct rte_flow_item_icmp rte_flow_item_icmp_mask = {
+ .hdr = {
+ .icmp_type = 0xff,
+ .icmp_code = 0xff,
+ },
+};
+
/**
* RTE_FLOW_ITEM_TYPE_UDP.
*
struct udp_hdr hdr; /**< UDP header definition. */
};
+/** Default mask for RTE_FLOW_ITEM_TYPE_UDP. */
+static const struct rte_flow_item_udp rte_flow_item_udp_mask = {
+ .hdr = {
+ .src_port = 0xffff,
+ .dst_port = 0xffff,
+ },
+};
+
/**
* RTE_FLOW_ITEM_TYPE_TCP.
*
struct tcp_hdr hdr; /**< TCP header definition. */
};
+/** Default mask for RTE_FLOW_ITEM_TYPE_TCP. */
+static const struct rte_flow_item_tcp rte_flow_item_tcp_mask = {
+ .hdr = {
+ .src_port = 0xffff,
+ .dst_port = 0xffff,
+ },
+};
+
/**
* RTE_FLOW_ITEM_TYPE_SCTP.
*
struct sctp_hdr hdr; /**< SCTP header definition. */
};
+/** Default mask for RTE_FLOW_ITEM_TYPE_SCTP. */
+static const struct rte_flow_item_sctp rte_flow_item_sctp_mask = {
+ .hdr = {
+ .src_port = 0xffff,
+ .dst_port = 0xffff,
+ },
+};
+
/**
* RTE_FLOW_ITEM_TYPE_VXLAN.
*
uint8_t rsvd1; /**< Reserved, normally 0x00. */
};
+/** Default mask for RTE_FLOW_ITEM_TYPE_VXLAN. */
+static const struct rte_flow_item_vxlan rte_flow_item_vxlan_mask = {
+ .vni = "\xff\xff\xff",
+};
+
/**
* Matching pattern item definition.
*
* Patterns are terminated by END items.
*
* The spec field should be a valid pointer to a structure of the related
- * item type. It may be set to NULL in many cases to use default values.
+ * item type. It may remain unspecified (NULL) in many cases to request
+ * broad (nonspecific) matching. In such cases, last and mask must also be
+ * set to NULL.
*
* Optionally, last can point to a structure of the same type to define an
* inclusive range. This is mostly supported by integer and address fields,
* may cause errors otherwise. Fields that do not support ranges must be set
* to 0 or to the same value as the corresponding fields in spec.
*
- * By default all fields present in spec are considered relevant (see note
- * below). This behavior can be altered by providing a mask structure of the
+ * Only the fields defined to nonzero values in the default masks (see
+ * rte_flow_item_{name}_mask constants) are considered relevant by
+ * default. This can be overridden by providing a mask structure of the
* same type with applicable bits set to one. It can also be used to
* partially filter out specific fields (e.g. as an alternate mean to match
* ranges of IP addresses).
* carefully. For example, if for an IPv4 address field, spec provides
* 10.1.2.3, last provides 10.3.4.5 and mask provides 255.255.0.0, the
* effective range becomes 10.1.0.0 to 10.3.255.255.
- *
- * Note: the defaults for data-matching items such as IPv4 when mask is not
- * specified actually depend on the underlying implementation since only
- * recognized fields can be taken into account.
*/
struct rte_flow_item {
enum rte_flow_item_type type; /**< Item type. */
* Similar to QUEUE, except RSS is additionally performed on packets to
* spread them among several queues according to the provided parameters.
*
- * Note: RSS hash result is normally stored in the hash.rss mbuf field,
- * however it conflicts with the MARK action as they share the same
- * space. When both actions are specified, the RSS hash is discarded and
- * PKT_RX_RSS_HASH is not set in ol_flags. MARK has priority. The mbuf
- * structure should eventually evolve to store both.
+ * Note: RSS hash result is stored in the hash.rss mbuf field which overlaps
+ * hash.fdir.lo. Since the MARK action sets the hash.fdir.hi field only,
+ * both can be requested simultaneously.
*
* Terminating by default.
*/
git.droids-corp.org / dpdk.git / blobdiff