-/*-
- * BSD LICENSE
- *
- * Copyright(c) 2010-2013 Intel Corporation. All rights reserved.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of Intel Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2010-2015 Intel Corporation
*/
#ifndef _RTE_HASH_H_
*/
#include <stdint.h>
-#include <sys/queue.h>
+#include <stddef.h>
+
+#include <rte_compat.h>
#ifdef __cplusplus
extern "C" {
#endif
/** Maximum size of hash table that can be created. */
-#define RTE_HASH_ENTRIES_MAX (1 << 26)
-
-/** Maximum bucket size that can be created. */
-#define RTE_HASH_BUCKET_ENTRIES_MAX 16
+#define RTE_HASH_ENTRIES_MAX (1 << 30)
-/** Maximum length of key that can be used. */
-#define RTE_HASH_KEY_LENGTH_MAX 64
+/** Maximum number of characters in hash name.*/
+#define RTE_HASH_NAMESIZE 32
-/** Max number of keys that can be searched for using rte_hash_lookup_multi. */
-#define RTE_HASH_LOOKUP_BULK_MAX 16
+/** Maximum number of keys that can be searched for using rte_hash_lookup_bulk. */
+#define RTE_HASH_LOOKUP_BULK_MAX 64
#define RTE_HASH_LOOKUP_MULTI_MAX RTE_HASH_LOOKUP_BULK_MAX
-/** Max number of characters in hash name.*/
-#define RTE_HASH_NAMESIZE 32
+/** Enable Hardware transactional memory support. */
+#define RTE_HASH_EXTRA_FLAGS_TRANS_MEM_SUPPORT 0x01
+
+/** Default behavior of insertion, single writer/multi writer */
+#define RTE_HASH_EXTRA_FLAGS_MULTI_WRITER_ADD 0x02
+
+/** Flag to support reader writer concurrency */
+#define RTE_HASH_EXTRA_FLAGS_RW_CONCURRENCY 0x04
+
+/** Flag to indicate the extendable bucket table feature should be used */
+#define RTE_HASH_EXTRA_FLAGS_EXT_TABLE 0x08
+
+/** Flag to disable freeing of key index on hash delete.
+ * Refer to rte_hash_del_xxx APIs for more details.
+ * This is enabled by default when RTE_HASH_EXTRA_FLAGS_RW_CONCURRENCY_LF
+ * is enabled.
+ */
+#define RTE_HASH_EXTRA_FLAGS_NO_FREE_ON_DEL 0x10
-/** Signature of key that is stored internally. */
+/** Flag to support lock free reader writer concurrency. Both single writer
+ * and multi writer use cases are supported.
+ */
+#define RTE_HASH_EXTRA_FLAGS_RW_CONCURRENCY_LF 0x20
+
+/**
+ * The type of hash value of a key.
+ * It should be a value of at least 32bit with fully random pattern.
+ */
typedef uint32_t hash_sig_t;
/** Type of function that can be used for calculating the hash value. */
typedef uint32_t (*rte_hash_function)(const void *key, uint32_t key_len,
uint32_t init_val);
+/** Type of function used to compare the hash key. */
+typedef int (*rte_hash_cmp_eq_t)(const void *key1, const void *key2, size_t key_len);
+
/**
- * Parameters used when creating the hash table. The total table entries and
- * bucket entries must be a power of 2.
+ * Parameters used when creating the hash table.
*/
struct rte_hash_parameters {
const char *name; /**< Name of the hash. */
uint32_t entries; /**< Total hash table entries. */
- uint32_t bucket_entries; /**< Bucket entries. */
+ uint32_t reserved; /**< Unused field. Should be set to 0 */
uint32_t key_len; /**< Length of hash key. */
- rte_hash_function hash_func; /**< Function used to calculate hash. */
+ rte_hash_function hash_func; /**< Primary Hash function used to calculate hash. */
uint32_t hash_func_init_val; /**< Init value used by hash_func. */
int socket_id; /**< NUMA Socket ID for memory. */
+ uint8_t extra_flag; /**< Indicate if additional parameters are present. */
};
-/** A hash table structure. */
-struct rte_hash {
- TAILQ_ENTRY(rte_hash) next;/**< Next in list. */
-
- char name[RTE_HASH_NAMESIZE]; /**< Name of the hash. */
- uint32_t entries; /**< Total table entries. */
- uint32_t bucket_entries; /**< Bucket entries. */
- uint32_t key_len; /**< Length of hash key. */
- rte_hash_function hash_func; /**< Function used to calculate hash. */
- uint32_t hash_func_init_val; /**< Init value used by hash_func. */
- uint32_t num_buckets; /**< Number of buckets in table. */
- uint32_t bucket_bitmask; /**< Bitmask for getting bucket index
- from hash signature. */
- hash_sig_t sig_msb; /**< MSB is always set in valid signatures. */
- uint8_t *sig_tbl; /**< Flat array of hash signature buckets. */
- uint32_t sig_tbl_bucket_size; /**< Signature buckets may be padded for
- alignment reasons, and this is the
- bucket size used by sig_tbl. */
- uint8_t *key_tbl; /**< Flat array of key value buckets. */
- uint32_t key_tbl_key_size; /**< Keys may be padded for alignment
- reasons, and this is the key size
- used by key_tbl. */
-};
+/** @internal A hash table structure. */
+struct rte_hash;
/**
* Create a new hash table.
* Possible rte_errno errors include:
* - E_RTE_NO_CONFIG - function could not get pointer to rte_config structure
* - E_RTE_SECONDARY - function was called from a secondary process instance
- * - E_RTE_NO_TAILQ - no tailq list could be got for the hash table list
* - ENOENT - missing entry
* - EINVAL - invalid parameter passed to function
* - ENOSPC - the maximum number of memzones has already been allocated
struct rte_hash *
rte_hash_create(const struct rte_hash_parameters *params);
+/**
+ * Set a new hash compare function other than the default one.
+ *
+ * @note Function pointer does not work with multi-process, so do not use it
+ * in multi-process mode.
+ *
+ * @param h
+ * Hash table for which the function is to be changed
+ * @param func
+ * New compare function
+ */
+void rte_hash_set_cmp_func(struct rte_hash *h, rte_hash_cmp_eq_t func);
/**
* Find an existing hash table object and return a pointer to it.
void
rte_hash_free(struct rte_hash *h);
+/**
+ * Reset all hash structure, by zeroing all entries.
+ * When RTE_HASH_EXTRA_FLAGS_RW_CONCURRENCY_LF is enabled,
+ * it is application's responsibility to make sure that
+ * none of the readers are referencing the hash table
+ * while calling this API.
+ *
+ * @param h
+ * Hash table to reset
+ */
+void
+rte_hash_reset(struct rte_hash *h);
+
+/**
+ * Return the number of keys in the hash table
+ * @param h
+ * Hash table to query from
+ * @return
+ * - -EINVAL if parameters are invalid
+ * - A value indicating how many keys were inserted in the table.
+ */
+int32_t
+rte_hash_count(const struct rte_hash *h);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice
+ *
+ * Return the maximum key value ID that could possibly be returned by
+ * rte_hash_add_key function.
+ *
+ * @param h
+ * Hash table to query from
+ * @return
+ * - -EINVAL if parameters are invalid
+ * - A value indicating the max key ID of key slots present in the table.
+ */
+__rte_experimental
+int32_t
+rte_hash_max_key_id(const struct rte_hash *h);
+
+/**
+ * Add a key-value pair to an existing hash table.
+ * This operation is not multi-thread safe
+ * and should only be called from one thread by default.
+ * Thread safety can be enabled by setting flag during
+ * table creation.
+ * If the key exists already in the table, this API updates its value
+ * with 'data' passed in this API. It is the responsibility of
+ * the application to manage any memory associated with the old value.
+ * The readers might still be using the old value even after this API
+ * has returned.
+ *
+ * @param h
+ * Hash table to add the key to.
+ * @param key
+ * Key to add to the hash table.
+ * @param data
+ * Data to add to the hash table.
+ * @return
+ * - 0 if added successfully
+ * - -EINVAL if the parameters are invalid.
+ * - -ENOSPC if there is no space in the hash for this key.
+ */
+int
+rte_hash_add_key_data(const struct rte_hash *h, const void *key, void *data);
+
+/**
+ * Add a key-value pair with a pre-computed hash value
+ * to an existing hash table.
+ * This operation is not multi-thread safe
+ * and should only be called from one thread by default.
+ * Thread safety can be enabled by setting flag during
+ * table creation.
+ * If the key exists already in the table, this API updates its value
+ * with 'data' passed in this API. It is the responsibility of
+ * the application to manage any memory associated with the old value.
+ * The readers might still be using the old value even after this API
+ * has returned.
+ *
+ * @param h
+ * Hash table to add the key to.
+ * @param key
+ * Key to add to the hash table.
+ * @param sig
+ * Precomputed hash value for 'key'
+ * @param data
+ * Data to add to the hash table.
+ * @return
+ * - 0 if added successfully
+ * - -EINVAL if the parameters are invalid.
+ * - -ENOSPC if there is no space in the hash for this key.
+ */
+int32_t
+rte_hash_add_key_with_hash_data(const struct rte_hash *h, const void *key,
+ hash_sig_t sig, void *data);
+
/**
* Add a key to an existing hash table. This operation is not multi-thread safe
- * and should only be called from one thread.
+ * and should only be called from one thread by default.
+ * Thread safety can be enabled by setting flag during
+ * table creation.
*
* @param h
* Hash table to add the key to.
* - -EINVAL if the parameters are invalid.
* - -ENOSPC if there is no space in the hash for this key.
* - A positive value that can be used by the caller as an offset into an
- * array of user data. This value is unique for this key.
+ * array of user data. This value is unique for this key. This
+ * unique key id may be larger than the user specified entry count
+ * when RTE_HASH_EXTRA_FLAGS_MULTI_WRITER_ADD flag is set.
*/
int32_t
rte_hash_add_key(const struct rte_hash *h, const void *key);
/**
- * Add a key to an existing hash table. This operation is not multi-thread safe
- * and should only be called from one thread.
+ * Add a key to an existing hash table.
+ * This operation is not multi-thread safe
+ * and should only be called from one thread by default.
+ * Thread safety can be enabled by setting flag during
+ * table creation.
*
* @param h
* Hash table to add the key to.
* @param key
* Key to add to the hash table.
* @param sig
- * Hash value to add to the hash table.
+ * Precomputed hash value for 'key'.
* @return
* - -EINVAL if the parameters are invalid.
* - -ENOSPC if there is no space in the hash for this key.
* - A positive value that can be used by the caller as an offset into an
- * array of user data. This value is unique for this key.
+ * array of user data. This value is unique for this key. This
+ * unique key ID may be larger than the user specified entry count
+ * when RTE_HASH_EXTRA_FLAGS_MULTI_WRITER_ADD flag is set.
*/
int32_t
-rte_hash_add_key_with_hash(const struct rte_hash *h,
- const void *key, hash_sig_t sig);
+rte_hash_add_key_with_hash(const struct rte_hash *h, const void *key, hash_sig_t sig);
/**
- * Remove a key from an existing hash table. This operation is not multi-thread
- * safe and should only be called from one thread.
+ * Remove a key from an existing hash table.
+ * This operation is not multi-thread safe
+ * and should only be called from one thread by default.
+ * Thread safety can be enabled by setting flag during
+ * table creation.
+ * If RTE_HASH_EXTRA_FLAGS_NO_FREE_ON_DEL or
+ * RTE_HASH_EXTRA_FLAGS_RW_CONCURRENCY_LF is enabled,
+ * the key index returned by rte_hash_add_key_xxx APIs will not be
+ * freed by this API. rte_hash_free_key_with_position API must be called
+ * additionally to free the index associated with the key.
+ * rte_hash_free_key_with_position API should be called after all
+ * the readers have stopped referencing the entry corresponding to
+ * this key. RCU mechanisms could be used to determine such a state.
*
* @param h
* Hash table to remove the key from.
rte_hash_del_key(const struct rte_hash *h, const void *key);
/**
- * Remove a key from an existing hash table. This operation is not multi-thread
- * safe and should only be called from one thread.
+ * Remove a key from an existing hash table.
+ * This operation is not multi-thread safe
+ * and should only be called from one thread by default.
+ * Thread safety can be enabled by setting flag during
+ * table creation.
+ * If RTE_HASH_EXTRA_FLAGS_NO_FREE_ON_DEL or
+ * RTE_HASH_EXTRA_FLAGS_RW_CONCURRENCY_LF is enabled,
+ * the key index returned by rte_hash_add_key_xxx APIs will not be
+ * freed by this API. rte_hash_free_key_with_position API must be called
+ * additionally to free the index associated with the key.
+ * rte_hash_free_key_with_position API should be called after all
+ * the readers have stopped referencing the entry corresponding to
+ * this key. RCU mechanisms could be used to determine such a state.
*
* @param h
* Hash table to remove the key from.
* @param key
* Key to remove from the hash table.
* @param sig
- * Hash value to remove from the hash table.
+ * Precomputed hash value for 'key'.
* @return
* - -EINVAL if the parameters are invalid.
* - -ENOENT if the key is not found.
* value that was returned when the key was added.
*/
int32_t
-rte_hash_del_key_with_hash(const struct rte_hash *h,
- const void *key, hash_sig_t sig);
+rte_hash_del_key_with_hash(const struct rte_hash *h, const void *key, hash_sig_t sig);
+/**
+ * Find a key in the hash table given the position.
+ * This operation is multi-thread safe with regarding to other lookup threads.
+ * Read-write concurrency can be enabled by setting flag during
+ * table creation.
+ *
+ * @param h
+ * Hash table to get the key from.
+ * @param position
+ * Position returned when the key was inserted.
+ * @param key
+ * Output containing a pointer to the key
+ * @return
+ * - 0 if retrieved successfully
+ * - -EINVAL if the parameters are invalid.
+ * - -ENOENT if no valid key is found in the given position.
+ */
+int
+rte_hash_get_key_with_position(const struct rte_hash *h, const int32_t position,
+ void **key);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice
+ *
+ * Free a hash key in the hash table given the position
+ * of the key. This operation is not multi-thread safe and should
+ * only be called from one thread by default. Thread safety
+ * can be enabled by setting flag during table creation.
+ * If RTE_HASH_EXTRA_FLAGS_NO_FREE_ON_DEL or
+ * RTE_HASH_EXTRA_FLAGS_RW_CONCURRENCY_LF is enabled,
+ * the key index returned by rte_hash_del_key_xxx APIs must be freed
+ * using this API. This API should be called after all the readers
+ * have stopped referencing the entry corresponding to this key.
+ * RCU mechanisms could be used to determine such a state.
+ * This API does not validate if the key is already freed.
+ *
+ * @param h
+ * Hash table to free the key from.
+ * @param position
+ * Position returned when the key was deleted.
+ * @return
+ * - 0 if freed successfully
+ * - -EINVAL if the parameters are invalid.
+ */
+__rte_experimental
+int
+rte_hash_free_key_with_position(const struct rte_hash *h,
+ const int32_t position);
/**
- * Find a key in the hash table. This operation is multi-thread safe.
+ * Find a key-value pair in the hash table.
+ * This operation is multi-thread safe with regarding to other lookup threads.
+ * Read-write concurrency can be enabled by setting flag during
+ * table creation.
+ *
+ * @param h
+ * Hash table to look in.
+ * @param key
+ * Key to find.
+ * @param data
+ * Output with pointer to data returned from the hash table.
+ * @return
+ * - A positive value that can be used by the caller as an offset into an
+ * array of user data. This value is unique for this key, and is the same
+ * value that was returned when the key was added.
+ * - -EINVAL if the parameters are invalid.
+ * - -ENOENT if the key is not found.
+ */
+int
+rte_hash_lookup_data(const struct rte_hash *h, const void *key, void **data);
+
+/**
+ * Find a key-value pair with a pre-computed hash value
+ * to an existing hash table.
+ * This operation is multi-thread safe with regarding to other lookup threads.
+ * Read-write concurrency can be enabled by setting flag during
+ * table creation.
+ *
+ * @param h
+ * Hash table to look in.
+ * @param key
+ * Key to find.
+ * @param sig
+ * Precomputed hash value for 'key'
+ * @param data
+ * Output with pointer to data returned from the hash table.
+ * @return
+ * - A positive value that can be used by the caller as an offset into an
+ * array of user data. This value is unique for this key, and is the same
+ * value that was returned when the key was added.
+ * - -EINVAL if the parameters are invalid.
+ * - -ENOENT if the key is not found.
+ */
+int
+rte_hash_lookup_with_hash_data(const struct rte_hash *h, const void *key,
+ hash_sig_t sig, void **data);
+
+/**
+ * Find a key in the hash table.
+ * This operation is multi-thread safe with regarding to other lookup threads.
+ * Read-write concurrency can be enabled by setting flag during
+ * table creation.
*
* @param h
* Hash table to look in.
rte_hash_lookup(const struct rte_hash *h, const void *key);
/**
- * Find a key in the hash table. This operation is multi-thread safe.
+ * Find a key in the hash table.
+ * This operation is multi-thread safe with regarding to other lookup threads.
+ * Read-write concurrency can be enabled by setting flag during
+ * table creation.
*
* @param h
* Hash table to look in.
* @param key
* Key to find.
* @param sig
- * Hash value to find.
+ * Precomputed hash value for 'key'.
* @return
* - -EINVAL if the parameters are invalid.
* - -ENOENT if the key is not found.
* value that was returned when the key was added.
*/
int32_t
-rte_hash_lookup_with_hash(const struct rte_hash *h,
+rte_hash_lookup_with_hash(const struct rte_hash *h,
const void *key, hash_sig_t sig);
-
/**
- * Calc a hash value by key. This operation is not multi-process safe.
+ * Calc a hash value by key.
+ * This operation is not multi-process safe.
*
* @param h
* Hash table to look in.
* @return
* - hash value
*/
-static inline hash_sig_t
-rte_hash_hash(const struct rte_hash *h, const void *key)
-{
- /* calc hash result by key */
- return h->hash_func(key, h->key_len, h->hash_func_init_val);
-}
+hash_sig_t
+rte_hash_hash(const struct rte_hash *h, const void *key);
-#define rte_hash_lookup_multi rte_hash_lookup_bulk
/**
- * Find multiple keys in the hash table. This operation is multi-thread safe.
+ * Find multiple keys in the hash table.
+ * This operation is multi-thread safe with regarding to other lookup threads.
+ * Read-write concurrency can be enabled by setting flag during
+ * table creation.
+ *
+ * @param h
+ * Hash table to look in.
+ * @param keys
+ * A pointer to a list of keys to look for.
+ * @param num_keys
+ * How many keys are in the keys list (less than RTE_HASH_LOOKUP_BULK_MAX).
+ * @param hit_mask
+ * Output containing a bitmask with all successful lookups.
+ * @param data
+ * Output containing array of data returned from all the successful lookups.
+ * @return
+ * -EINVAL if there's an error, otherwise number of successful lookups.
+ */
+int
+rte_hash_lookup_bulk_data(const struct rte_hash *h, const void **keys,
+ uint32_t num_keys, uint64_t *hit_mask, void *data[]);
+
+/**
+ * Find multiple keys in the hash table.
+ * This operation is multi-thread safe with regarding to other lookup threads.
+ * Read-write concurrency can be enabled by setting flag during
+ * table creation.
*
* @param h
* Hash table to look in.
int
rte_hash_lookup_bulk(const struct rte_hash *h, const void **keys,
uint32_t num_keys, int32_t *positions);
+
+/**
+ * Iterate through the hash table, returning key-value pairs.
+ *
+ * @param h
+ * Hash table to iterate
+ * @param key
+ * Output containing the key where current iterator
+ * was pointing at
+ * @param data
+ * Output containing the data associated with key.
+ * Returns NULL if data was not stored.
+ * @param next
+ * Pointer to iterator. Should be 0 to start iterating the hash table.
+ * Iterator is incremented after each call of this function.
+ * @return
+ * Position where key was stored, if successful.
+ * - -EINVAL if the parameters are invalid.
+ * - -ENOENT if end of the hash table.
+ */
+int32_t
+rte_hash_iterate(const struct rte_hash *h, const void **key, void **data, uint32_t *next);
#ifdef __cplusplus
}
#endif