extern "C" {
#endif
-/* deprecated options */
-#pragma GCC poison RTE_MBUF_SCATTER_GATHER
-#pragma GCC poison RTE_MBUF_REFCNT
-
/*
* Packet Offload Features Flags. It also carry packet type information.
* Critical resources. Both rx/tx shared these bits. Be cautious on any change
* Keep these flags synchronized with rte_get_rx_ol_flag_name() and
* rte_get_tx_ol_flag_name().
*/
-#define PKT_RX_VLAN_PKT (1ULL << 0) /**< RX packet is a 802.1q VLAN packet. */
+
+/**
+ * RX packet is a 802.1q VLAN packet. This flag was set by PMDs when
+ * the packet is recognized as a VLAN, but the behavior between PMDs
+ * was not the same. This flag is kept for some time to avoid breaking
+ * applications and should be replaced by PKT_RX_VLAN_STRIPPED.
+ */
+#define PKT_RX_VLAN_PKT (1ULL << 0)
+
#define PKT_RX_RSS_HASH (1ULL << 1) /**< RX packet with RSS hash result. */
#define PKT_RX_FDIR (1ULL << 2) /**< RX packet with FDIR match indicate. */
#define PKT_RX_L4_CKSUM_BAD (1ULL << 3) /**< L4 cksum of RX pkt. is not OK. */
#define PKT_RX_IP_CKSUM_BAD (1ULL << 4) /**< IP cksum of RX pkt. is not OK. */
-#define PKT_RX_EIP_CKSUM_BAD (0ULL << 0) /**< External IP header checksum error. */
-#define PKT_RX_OVERSIZE (0ULL << 0) /**< Num of desc of an RX pkt oversize. */
-#define PKT_RX_HBUF_OVERFLOW (0ULL << 0) /**< Header buffer overflow. */
-#define PKT_RX_RECIP_ERR (0ULL << 0) /**< Hardware processing error. */
-#define PKT_RX_MAC_ERR (0ULL << 0) /**< MAC error. */
+#define PKT_RX_EIP_CKSUM_BAD (1ULL << 5) /**< External IP header checksum error. */
+
+/**
+ * A vlan has been stripped by the hardware and its tci is saved in
+ * mbuf->vlan_tci. This can only happen if vlan stripping is enabled
+ * in the RX configuration of the PMD.
+ */
+#define PKT_RX_VLAN_STRIPPED (1ULL << 6)
+
+/* hole, some bits can be reused here */
+
#define PKT_RX_IEEE1588_PTP (1ULL << 9) /**< RX IEEE1588 L2 Ethernet PT Packet. */
#define PKT_RX_IEEE1588_TMST (1ULL << 10) /**< RX IEEE1588 L2/L4 timestamped packet.*/
#define PKT_RX_FDIR_ID (1ULL << 13) /**< FD id reported if FDIR match. */
#define PKT_RX_FDIR_FLX (1ULL << 14) /**< Flexible bytes reported if FDIR match. */
-#define PKT_RX_QINQ_PKT (1ULL << 15) /**< RX packet with double VLAN stripped. */
+
+/**
+ * The 2 vlans have been stripped by the hardware and their tci are
+ * saved in mbuf->vlan_tci (inner) and mbuf->vlan_tci_outer (outer).
+ * This can only happen if vlan stripping is enabled in the RX
+ * configuration of the PMD. If this flag is set, PKT_RX_VLAN_STRIPPED
+ * must also be set.
+ */
+#define PKT_RX_QINQ_STRIPPED (1ULL << 15)
+
+/**
+ * Deprecated.
+ * RX packet with double VLAN stripped.
+ * This flag is replaced by PKT_RX_QINQ_STRIPPED.
+ */
+#define PKT_RX_QINQ_PKT PKT_RX_QINQ_STRIPPED
+
/* add new RX flags here */
/* add new TX flags here */
+/**
+ * Bits 45:48 used for the tunnel type.
+ * When doing Tx offload like TSO or checksum, the HW needs to configure the
+ * tunnel type into the HW descriptors.
+ */
+#define PKT_TX_TUNNEL_VXLAN (0x1ULL << 45)
+#define PKT_TX_TUNNEL_GRE (0x2ULL << 45)
+#define PKT_TX_TUNNEL_IPIP (0x3ULL << 45)
+#define PKT_TX_TUNNEL_GENEVE (0x4ULL << 45)
+/* add new TX TUNNEL type here */
+#define PKT_TX_TUNNEL_MASK (0xFULL << 45)
+
/**
* Second VLAN insertion (QinQ) flag.
*/
* <'ether type'=0x88CC>
*/
#define RTE_PTYPE_L2_ETHER_LLDP 0x00000004
+/**
+ * NSH (Network Service Header) packet type.
+ *
+ * Packet format:
+ * <'ether type'=0x894F>
+ */
+#define RTE_PTYPE_L2_ETHER_NSH 0x00000005
/**
* Mask of layer 2 packet types.
* It is used for outer packet for tunneling cases.
/* define a set of marker types that can be used to refer to set points in the
* mbuf */
+__extension__
typedef void *MARKER[0]; /**< generic marker for a point in a structure */
+__extension__
typedef uint8_t MARKER8[0]; /**< generic marker with 1B alignment */
+__extension__
typedef uint64_t MARKER64[0]; /**< marker that allows us to overwrite 8 bytes
* with a single assignment */
* or non-atomic) is controlled by the CONFIG_RTE_MBUF_REFCNT_ATOMIC
* config option.
*/
+ RTE_STD_C11
union {
rte_atomic16_t refcnt_atomic; /**< Atomically accessed refcnt */
uint16_t refcnt; /**< Non-atomically accessed refcnt */
/*
* The packet type, which is the combination of outer/inner L2, L3, L4
- * and tunnel types.
+ * and tunnel types. The packet_type is about data really present in the
+ * mbuf. Example: if vlan stripping is enabled, a received vlan packet
+ * would have RTE_PTYPE_L2_ETHER and not RTE_PTYPE_L2_VLAN because the
+ * vlan is stripped from the data.
*/
+ RTE_STD_C11
union {
uint32_t packet_type; /**< L2/L3/L4 and tunnel information. */
struct {
uint32_t pkt_len; /**< Total pkt len: sum of all segments. */
uint16_t data_len; /**< Amount of data in segment buffer. */
- uint16_t vlan_tci; /**< VLAN Tag Control Identifier (CPU order) */
+ /** VLAN TCI (CPU order), valid if PKT_RX_VLAN_STRIPPED is set. */
+ uint16_t vlan_tci;
union {
uint32_t rss; /**< RSS hash result if RSS enabled */
struct {
+ RTE_STD_C11
union {
struct {
uint16_t hash;
/**< First 4 flexible bytes or FD ID, dependent on
PKT_RX_FDIR_* flag in ol_flags. */
} fdir; /**< Filter identifier if FDIR enabled */
- uint32_t sched; /**< Hierarchical scheduler */
+ struct {
+ uint32_t lo;
+ uint32_t hi;
+ } sched; /**< Hierarchical scheduler */
uint32_t usr; /**< User defined tags. See rte_distributor_process() */
} hash; /**< hash information */
uint32_t seqn; /**< Sequence number. See also rte_reorder_insert() */
- uint16_t vlan_tci_outer; /**< Outer VLAN Tag Control Identifier (CPU order) */
+ /** Outer VLAN TCI (CPU order), valid if PKT_RX_QINQ_STRIPPED is set. */
+ uint16_t vlan_tci_outer;
/* second cache line - fields only used in slow path or on TX */
- MARKER cacheline1 __rte_cache_aligned;
+ MARKER cacheline1 __rte_cache_min_aligned;
+ RTE_STD_C11
union {
void *userdata; /**< Can be used for external metadata */
uint64_t udata64; /**< Allow 8-byte userdata on 32-bit */
struct rte_mbuf *next; /**< Next segment of scattered packet. */
/* fields to support TX offloads */
+ RTE_STD_C11
union {
uint64_t tx_offload; /**< combined for easy fetch */
+ __extension__
struct {
- uint64_t l2_len:7; /**< L2 (MAC) Header Length. */
+ uint64_t l2_len:7;
+ /**< L2 (MAC) Header Length for non-tunneling pkt.
+ * Outer_L4_len + ... + Inner_L2_len for tunneling pkt.
+ */
uint64_t l3_len:9; /**< L3 (IP) Header Length. */
uint64_t l4_len:8; /**< L4 (TCP/UDP) Header Length. */
uint64_t tso_segsz:16; /**< TCP TSO segment size */
uint16_t timesync;
} __rte_cache_aligned;
+/**
+ * Prefetch the first part of the mbuf
+ *
+ * The first 64 bytes of the mbuf corresponds to fields that are used early
+ * in the receive path. If the cache line of the architecture is higher than
+ * 64B, the second part will also be prefetched.
+ *
+ * @param m
+ * The pointer to the mbuf.
+ */
+static inline void
+rte_mbuf_prefetch_part1(struct rte_mbuf *m)
+{
+ rte_prefetch0(&m->cacheline0);
+}
+
+/**
+ * Prefetch the second part of the mbuf
+ *
+ * The next 64 bytes of the mbuf corresponds to fields that are used in the
+ * transmit path. If the cache line of the architecture is higher than 64B,
+ * this function does nothing as it is expected that the full mbuf is
+ * already in cache.
+ *
+ * @param m
+ * The pointer to the mbuf.
+ */
+static inline void
+rte_mbuf_prefetch_part2(struct rte_mbuf *m)
+{
+#if RTE_CACHE_LINE_SIZE == 64
+ rte_prefetch0(&m->cacheline1);
+#else
+ RTE_SET_USED(m);
+#endif
+}
+
+
static inline uint16_t rte_pktmbuf_priv_size(struct rte_mempool *mp);
+/**
+ * Return the DMA address of the beginning of the mbuf data
+ *
+ * @param mb
+ * The pointer to the mbuf.
+ * @return
+ * The physical address of the beginning of the mbuf data
+ */
+static inline phys_addr_t
+rte_mbuf_data_dma_addr(const struct rte_mbuf *mb)
+{
+ return mb->buf_physaddr + mb->data_off;
+}
+
+/**
+ * Return the default DMA address of the beginning of the mbuf data
+ *
+ * This function is used by drivers in their receive function, as it
+ * returns the location where data should be written by the NIC, taking
+ * the default headroom in account.
+ *
+ * @param mb
+ * The pointer to the mbuf.
+ * @return
+ * The physical address of the beginning of the mbuf data
+ */
+static inline phys_addr_t
+rte_mbuf_data_dma_addr_default(const struct rte_mbuf *mb)
+{
+ return mb->buf_physaddr + RTE_PKTMBUF_HEADROOM;
+}
+
/**
* Return the mbuf owning the data buffer address of an indirect mbuf.
*
/** check mbuf type in debug mode */
#define __rte_mbuf_sanity_check(m, is_h) rte_mbuf_sanity_check(m, is_h)
-/** check mbuf type in debug mode if mbuf pointer is not null */
-#define __rte_mbuf_sanity_check_raw(m, is_h) do { \
- if ((m) != NULL) \
- rte_mbuf_sanity_check(m, is_h); \
-} while (0)
-
-/** MBUF asserts in debug mode */
-#define RTE_MBUF_ASSERT(exp) \
-if (!(exp)) { \
- rte_panic("line%d\tassert \"" #exp "\" failed\n", __LINE__); \
-}
-
#else /* RTE_LIBRTE_MBUF_DEBUG */
/** check mbuf type in debug mode */
#define __rte_mbuf_sanity_check(m, is_h) do { } while (0)
-/** check mbuf type in debug mode if mbuf pointer is not null */
-#define __rte_mbuf_sanity_check_raw(m, is_h) do { } while (0)
-
-/** MBUF asserts in debug mode */
-#define RTE_MBUF_ASSERT(exp) do { } while (0)
-
#endif /* RTE_LIBRTE_MBUF_DEBUG */
#ifdef RTE_MBUF_REFCNT_ATOMIC
rte_mbuf_sanity_check(const struct rte_mbuf *m, int is_header);
/**
- * @internal Allocate a new mbuf from mempool *mp*.
- * The use of that function is reserved for RTE internal needs.
- * Please use rte_pktmbuf_alloc().
+ * Allocate an unitialized mbuf from mempool *mp*.
+ *
+ * This function can be used by PMDs (especially in RX functions) to
+ * allocate an unitialized mbuf. The driver is responsible of
+ * initializing all the required fields. See rte_pktmbuf_reset().
+ * For standard needs, prefer rte_pktmbuf_alloc().
*
* @param mp
* The mempool from which mbuf is allocated.
* - The pointer to the new mbuf on success.
* - NULL if allocation failed.
*/
-static inline struct rte_mbuf *__rte_mbuf_raw_alloc(struct rte_mempool *mp)
+static inline struct rte_mbuf *rte_mbuf_raw_alloc(struct rte_mempool *mp)
{
struct rte_mbuf *m;
void *mb = NULL;
+
if (rte_mempool_get(mp, &mb) < 0)
return NULL;
m = (struct rte_mbuf *)mb;
- RTE_MBUF_ASSERT(rte_mbuf_refcnt_read(m) == 0);
+ RTE_ASSERT(rte_mbuf_refcnt_read(m) == 0);
rte_mbuf_refcnt_set(m, 1);
+ __rte_mbuf_sanity_check(m, 0);
+
return m;
}
static inline void __attribute__((always_inline))
__rte_mbuf_raw_free(struct rte_mbuf *m)
{
- RTE_MBUF_ASSERT(rte_mbuf_refcnt_read(m) == 0);
+ RTE_ASSERT(rte_mbuf_refcnt_read(m) == 0);
rte_mempool_put(m->pool, m);
}
return mbp_priv->mbuf_priv_size;
}
+/**
+ * Reset the data_off field of a packet mbuf to its default value.
+ *
+ * The given mbuf must have only one segment, which should be empty.
+ *
+ * @param m
+ * The packet mbuf's data_off field has to be reset.
+ */
+static inline void rte_pktmbuf_reset_headroom(struct rte_mbuf *m)
+{
+ m->data_off = RTE_MIN(RTE_PKTMBUF_HEADROOM, (uint16_t)m->buf_len);
+}
+
/**
* Reset the fields of a packet mbuf to their default values.
*
m->ol_flags = 0;
m->packet_type = 0;
- m->data_off = (RTE_PKTMBUF_HEADROOM <= m->buf_len) ?
- RTE_PKTMBUF_HEADROOM : m->buf_len;
+ rte_pktmbuf_reset_headroom(m);
m->data_len = 0;
__rte_mbuf_sanity_check(m, 1);
static inline struct rte_mbuf *rte_pktmbuf_alloc(struct rte_mempool *mp)
{
struct rte_mbuf *m;
- if ((m = __rte_mbuf_raw_alloc(mp)) != NULL)
+ if ((m = rte_mbuf_raw_alloc(mp)) != NULL)
rte_pktmbuf_reset(m);
return m;
}
+/**
+ * Allocate a bulk of mbufs, initialize refcnt and reset the fields to default
+ * values.
+ *
+ * @param pool
+ * The mempool from which mbufs are allocated.
+ * @param mbufs
+ * Array of pointers to mbufs
+ * @param count
+ * Array size
+ * @return
+ * - 0: Success
+ */
+static inline int rte_pktmbuf_alloc_bulk(struct rte_mempool *pool,
+ struct rte_mbuf **mbufs, unsigned count)
+{
+ unsigned idx = 0;
+ int rc;
+
+ rc = rte_mempool_get_bulk(pool, (void **)mbufs, count);
+ if (unlikely(rc))
+ return rc;
+
+ /* To understand duff's device on loop unwinding optimization, see
+ * https://en.wikipedia.org/wiki/Duff's_device.
+ * Here while() loop is used rather than do() while{} to avoid extra
+ * check if count is zero.
+ */
+ switch (count % 4) {
+ case 0:
+ while (idx != count) {
+ RTE_ASSERT(rte_mbuf_refcnt_read(mbufs[idx]) == 0);
+ rte_mbuf_refcnt_set(mbufs[idx], 1);
+ rte_pktmbuf_reset(mbufs[idx]);
+ idx++;
+ case 3:
+ RTE_ASSERT(rte_mbuf_refcnt_read(mbufs[idx]) == 0);
+ rte_mbuf_refcnt_set(mbufs[idx], 1);
+ rte_pktmbuf_reset(mbufs[idx]);
+ idx++;
+ case 2:
+ RTE_ASSERT(rte_mbuf_refcnt_read(mbufs[idx]) == 0);
+ rte_mbuf_refcnt_set(mbufs[idx], 1);
+ rte_pktmbuf_reset(mbufs[idx]);
+ idx++;
+ case 1:
+ RTE_ASSERT(rte_mbuf_refcnt_read(mbufs[idx]) == 0);
+ rte_mbuf_refcnt_set(mbufs[idx], 1);
+ rte_pktmbuf_reset(mbufs[idx]);
+ idx++;
+ }
+ }
+ return 0;
+}
+
/**
* Attach packet mbuf to another packet mbuf.
*
* After attachment we refer the mbuf we attached as 'indirect',
* while mbuf we attached to as 'direct'.
+ * The direct mbuf's reference counter is incremented.
+ *
* Right now, not supported:
* - attachment for already indirect mbuf (e.g. - mi has to be direct).
* - mbuf we trying to attach (mi) is used by someone else
{
struct rte_mbuf *md;
- RTE_MBUF_ASSERT(RTE_MBUF_DIRECT(mi) &&
+ RTE_ASSERT(RTE_MBUF_DIRECT(mi) &&
rte_mbuf_refcnt_read(mi) == 1);
/* if m is not direct, get the mbuf that embeds the data */
*
* - restore original mbuf address and length values.
* - reset pktmbuf data and data_len to their default values.
- * All other fields of the given packet mbuf will be left intact.
+ * - decrement the direct mbuf's reference counter. When the
+ * reference counter becomes 0, the direct mbuf is freed.
+ *
+ * All other fields of the given packet mbuf will be left intact.
*
* @param m
* The indirect attached packet mbuf.
*/
static inline void rte_pktmbuf_detach(struct rte_mbuf *m)
{
+ struct rte_mbuf *md = rte_mbuf_from_indirect(m);
struct rte_mempool *mp = m->pool;
uint32_t mbuf_size, buf_len, priv_size;
m->buf_addr = (char *)m + mbuf_size;
m->buf_physaddr = rte_mempool_virt2phy(mp, m) + mbuf_size;
m->buf_len = (uint16_t)buf_len;
- m->data_off = RTE_MIN(RTE_PKTMBUF_HEADROOM, (uint16_t)m->buf_len);
+ rte_pktmbuf_reset_headroom(m);
m->data_len = 0;
m->ol_flags = 0;
+
+ if (rte_mbuf_refcnt_update(md, -1) == 0)
+ __rte_mbuf_raw_free(md);
}
static inline struct rte_mbuf* __attribute__((always_inline))
__rte_mbuf_sanity_check(m, 0);
if (likely(rte_mbuf_refcnt_update(m, -1) == 0)) {
-
- /* if this is an indirect mbuf, then
- * - detach mbuf
- * - free attached mbuf segment
- */
- if (RTE_MBUF_INDIRECT(m)) {
- struct rte_mbuf *md = rte_mbuf_from_indirect(m);
+ /* if this is an indirect mbuf, it is detached. */
+ if (RTE_MBUF_INDIRECT(m))
rte_pktmbuf_detach(m);
- if (rte_mbuf_refcnt_update(md, -1) == 0)
- __rte_mbuf_raw_free(md);
- }
return m;
}
return NULL;
*/
#define rte_pktmbuf_mtod(m, t) rte_pktmbuf_mtod_offset(m, t, 0)
+/**
+ * A macro that returns the physical address that points to an offset of the
+ * start of the data in the mbuf
+ *
+ * @param m
+ * The packet mbuf.
+ * @param o
+ * The offset into the data to calculate address from.
+ */
+#define rte_pktmbuf_mtophys_offset(m, o) \
+ (phys_addr_t)((m)->buf_physaddr + (m)->data_off + (o))
+
+/**
+ * A macro that returns the physical address that points to the start of the
+ * data in the mbuf
+ *
+ * @param m
+ * The packet mbuf.
+ */
+#define rte_pktmbuf_mtophys(m) rte_pktmbuf_mtophys_offset(m, 0)
+
/**
* A macro that returns the length of the packet.
*