* Keep these flags synchronized with rte_get_rx_ol_flag_name() and
* rte_get_tx_ol_flag_name().
*/
-#define PKT_RX_VLAN_PKT (1ULL << 0) /**< RX packet is a 802.1q VLAN packet. */
+
+/**
+ * RX packet is a 802.1q VLAN packet. This flag was set by PMDs when
+ * the packet is recognized as a VLAN, but the behavior between PMDs
+ * was not the same. This flag is kept for some time to avoid breaking
+ * applications and should be replaced by PKT_RX_VLAN_STRIPPED.
+ */
+#define PKT_RX_VLAN_PKT (1ULL << 0)
+
#define PKT_RX_RSS_HASH (1ULL << 1) /**< RX packet with RSS hash result. */
#define PKT_RX_FDIR (1ULL << 2) /**< RX packet with FDIR match indicate. */
#define PKT_RX_L4_CKSUM_BAD (1ULL << 3) /**< L4 cksum of RX pkt. is not OK. */
#define PKT_RX_IP_CKSUM_BAD (1ULL << 4) /**< IP cksum of RX pkt. is not OK. */
#define PKT_RX_EIP_CKSUM_BAD (1ULL << 5) /**< External IP header checksum error. */
-#define PKT_RX_OVERSIZE (0ULL << 0) /**< Num of desc of an RX pkt oversize. */
-#define PKT_RX_HBUF_OVERFLOW (0ULL << 0) /**< Header buffer overflow. */
-#define PKT_RX_RECIP_ERR (0ULL << 0) /**< Hardware processing error. */
-#define PKT_RX_MAC_ERR (0ULL << 0) /**< MAC error. */
+
+/**
+ * A vlan has been stripped by the hardware and its tci is saved in
+ * mbuf->vlan_tci. This can only happen if vlan stripping is enabled
+ * in the RX configuration of the PMD.
+ */
+#define PKT_RX_VLAN_STRIPPED (1ULL << 6)
+
+/* hole, some bits can be reused here */
+
#define PKT_RX_IEEE1588_PTP (1ULL << 9) /**< RX IEEE1588 L2 Ethernet PT Packet. */
#define PKT_RX_IEEE1588_TMST (1ULL << 10) /**< RX IEEE1588 L2/L4 timestamped packet.*/
#define PKT_RX_FDIR_ID (1ULL << 13) /**< FD id reported if FDIR match. */
#define PKT_RX_FDIR_FLX (1ULL << 14) /**< Flexible bytes reported if FDIR match. */
-#define PKT_RX_QINQ_PKT (1ULL << 15) /**< RX packet with double VLAN stripped. */
+
+/**
+ * The 2 vlans have been stripped by the hardware and their tci are
+ * saved in mbuf->vlan_tci (inner) and mbuf->vlan_tci_outer (outer).
+ * This can only happen if vlan stripping is enabled in the RX
+ * configuration of the PMD. If this flag is set, PKT_RX_VLAN_STRIPPED
+ * must also be set.
+ */
+#define PKT_RX_QINQ_STRIPPED (1ULL << 15)
+
+/**
+ * Deprecated.
+ * RX packet with double VLAN stripped.
+ * This flag is replaced by PKT_RX_QINQ_STRIPPED.
+ */
+#define PKT_RX_QINQ_PKT PKT_RX_QINQ_STRIPPED
+
/* add new RX flags here */
/* add new TX flags here */
* <'ether type'=0x88CC>
*/
#define RTE_PTYPE_L2_ETHER_LLDP 0x00000004
+/**
+ * NSH (Network Service Header) packet type.
+ *
+ * Packet format:
+ * <'ether type'=0x894F>
+ */
+#define RTE_PTYPE_L2_ETHER_NSH 0x00000005
/**
* Mask of layer 2 packet types.
* It is used for outer packet for tunneling cases.
/*
* The packet type, which is the combination of outer/inner L2, L3, L4
- * and tunnel types.
+ * and tunnel types. The packet_type is about data really present in the
+ * mbuf. Example: if vlan stripping is enabled, a received vlan packet
+ * would have RTE_PTYPE_L2_ETHER and not RTE_PTYPE_L2_VLAN because the
+ * vlan is stripped from the data.
*/
union {
uint32_t packet_type; /**< L2/L3/L4 and tunnel information. */
uint32_t pkt_len; /**< Total pkt len: sum of all segments. */
uint16_t data_len; /**< Amount of data in segment buffer. */
- uint16_t vlan_tci; /**< VLAN Tag Control Identifier (CPU order) */
+ /** VLAN TCI (CPU order), valid if PKT_RX_VLAN_STRIPPED is set. */
+ uint16_t vlan_tci;
union {
uint32_t rss; /**< RSS hash result if RSS enabled */
uint32_t seqn; /**< Sequence number. See also rte_reorder_insert() */
- uint16_t vlan_tci_outer; /**< Outer VLAN Tag Control Identifier (CPU order) */
+ /** Outer VLAN TCI (CPU order), valid if PKT_RX_QINQ_STRIPPED is set. */
+ uint16_t vlan_tci_outer;
/* second cache line - fields only used in slow path or on TX */
MARKER cacheline1 __rte_cache_min_aligned;
uint16_t timesync;
} __rte_cache_aligned;
+/**
+ * Prefetch the first part of the mbuf
+ *
+ * The first 64 bytes of the mbuf corresponds to fields that are used early
+ * in the receive path. If the cache line of the architecture is higher than
+ * 64B, the second part will also be prefetched.
+ *
+ * @param m
+ * The pointer to the mbuf.
+ */
+static inline void
+rte_mbuf_prefetch_part1(struct rte_mbuf *m)
+{
+ rte_prefetch0(&m->cacheline0);
+}
+
+/**
+ * Prefetch the second part of the mbuf
+ *
+ * The next 64 bytes of the mbuf corresponds to fields that are used in the
+ * transmit path. If the cache line of the architecture is higher than 64B,
+ * this function does nothing as it is expected that the full mbuf is
+ * already in cache.
+ *
+ * @param m
+ * The pointer to the mbuf.
+ */
+static inline void
+rte_mbuf_prefetch_part2(struct rte_mbuf *m)
+{
+#if RTE_CACHE_LINE_SIZE == 64
+ rte_prefetch0(&m->cacheline1);
+#else
+ RTE_SET_USED(m);
+#endif
+}
+
+
static inline uint16_t rte_pktmbuf_priv_size(struct rte_mempool *mp);
/**
*
* After attachment we refer the mbuf we attached as 'indirect',
* while mbuf we attached to as 'direct'.
+ * The direct mbuf's reference counter is incremented.
+ *
* Right now, not supported:
* - attachment for already indirect mbuf (e.g. - mi has to be direct).
* - mbuf we trying to attach (mi) is used by someone else
*
* - restore original mbuf address and length values.
* - reset pktmbuf data and data_len to their default values.
- * All other fields of the given packet mbuf will be left intact.
+ * - decrement the direct mbuf's reference counter. When the
+ * reference counter becomes 0, the direct mbuf is freed.
+ *
+ * All other fields of the given packet mbuf will be left intact.
*
* @param m
* The indirect attached packet mbuf.
*/
static inline void rte_pktmbuf_detach(struct rte_mbuf *m)
{
+ struct rte_mbuf *md = rte_mbuf_from_indirect(m);
struct rte_mempool *mp = m->pool;
uint32_t mbuf_size, buf_len, priv_size;
m->data_off = RTE_MIN(RTE_PKTMBUF_HEADROOM, (uint16_t)m->buf_len);
m->data_len = 0;
m->ol_flags = 0;
+
+ if (rte_mbuf_refcnt_update(md, -1) == 0)
+ __rte_mbuf_raw_free(md);
}
static inline struct rte_mbuf* __attribute__((always_inline))
__rte_mbuf_sanity_check(m, 0);
if (likely(rte_mbuf_refcnt_update(m, -1) == 0)) {
-
- /* if this is an indirect mbuf, then
- * - detach mbuf
- * - free attached mbuf segment
- */
- if (RTE_MBUF_INDIRECT(m)) {
- struct rte_mbuf *md = rte_mbuf_from_indirect(m);
+ /* if this is an indirect mbuf, it is detached. */
+ if (RTE_MBUF_INDIRECT(m))
rte_pktmbuf_detach(m);
- if (rte_mbuf_refcnt_update(md, -1) == 0)
- __rte_mbuf_raw_free(md);
- }
return m;
}
return NULL;
git.droids-corp.org / dpdk.git / blobdiff