*/
#define PKT_RX_VLAN_PKT (1ULL << 0) /**< RX packet is a 802.1q VLAN packet. */
#define PKT_RX_RSS_HASH (1ULL << 1) /**< RX packet with RSS hash result. */
-#define PKT_RX_FDIR (1ULL << 2) /**< RX packet with FDIR infos. */
+#define PKT_RX_FDIR (1ULL << 2) /**< RX packet with FDIR match indicate. */
#define PKT_RX_L4_CKSUM_BAD (1ULL << 3) /**< L4 cksum of RX pkt. is not OK. */
#define PKT_RX_IP_CKSUM_BAD (1ULL << 4) /**< IP cksum of RX pkt. is not OK. */
#define PKT_RX_EIP_CKSUM_BAD (0ULL << 0) /**< External IP header checksum error. */
#define PKT_RX_IEEE1588_TMST (1ULL << 10) /**< RX IEEE1588 L2/L4 timestamped packet.*/
#define PKT_RX_TUNNEL_IPV4_HDR (1ULL << 11) /**< RX tunnel packet with IPv4 header.*/
#define PKT_RX_TUNNEL_IPV6_HDR (1ULL << 12) /**< RX tunnel packet with IPv6 header. */
+#define PKT_RX_FDIR_ID (1ULL << 13) /**< FD id reported if FDIR match. */
+#define PKT_RX_FDIR_FLX (1ULL << 14) /**< Flexible bytes reported if FDIR match. */
+/* add new RX flags here */
-#define PKT_TX_VLAN_PKT (1ULL << 55) /**< TX packet is a 802.1q VLAN packet. */
-#define PKT_TX_IP_CKSUM (1ULL << 54) /**< IP cksum of TX pkt. computed by NIC. */
+/* add new TX flags here */
#define PKT_TX_VXLAN_CKSUM (1ULL << 50) /**< TX checksum of VXLAN computed by NIC */
-#define PKT_TX_IPV4_CSUM PKT_TX_IP_CKSUM /**< Alias of PKT_TX_IP_CKSUM. */
-#define PKT_TX_IPV4 PKT_RX_IPV4_HDR /**< IPv4 with no IP checksum offload. */
-#define PKT_TX_IPV6 PKT_RX_IPV6_HDR /**< IPv6 packet */
+#define PKT_TX_IEEE1588_TMST (1ULL << 51) /**< TX IEEE1588 packet to timestamp. */
-/*
- * Bits 52+53 used for L4 packet type with checksum enabled.
- * 00: Reserved
- * 01: TCP checksum
- * 10: SCTP checksum
- * 11: UDP checksum
+/**
+ * Bits 52+53 used for L4 packet type with checksum enabled: 00: Reserved,
+ * 01: TCP checksum, 10: SCTP checksum, 11: UDP checksum. To use hardware
+ * L4 checksum offload, the user needs to:
+ * - fill l2_len and l3_len in mbuf
+ * - set the flags PKT_TX_TCP_CKSUM, PKT_TX_SCTP_CKSUM or PKT_TX_UDP_CKSUM
+ * - set the flag PKT_TX_IPV4 or PKT_TX_IPV6
+ * - calculate the pseudo header checksum and set it in the L4 header (only
+ * for TCP or UDP). For SCTP, set the crc field to 0.
*/
#define PKT_TX_L4_NO_CKSUM (0ULL << 52) /**< Disable L4 cksum of TX pkt. */
#define PKT_TX_TCP_CKSUM (1ULL << 52) /**< TCP cksum of TX pkt. computed by NIC. */
#define PKT_TX_UDP_CKSUM (3ULL << 52) /**< UDP cksum of TX pkt. computed by NIC. */
#define PKT_TX_L4_MASK (3ULL << 52) /**< Mask for L4 cksum offload request. */
-/* Bit 51 - IEEE1588*/
-#define PKT_TX_IEEE1588_TMST (1ULL << 51) /**< TX IEEE1588 packet to timestamp. */
+#define PKT_TX_IP_CKSUM (1ULL << 54) /**< IP cksum of TX pkt. computed by NIC. */
+#define PKT_TX_IPV4_CSUM PKT_TX_IP_CKSUM /**< Alias of PKT_TX_IP_CKSUM. */
+
+/** Tell the NIC it's an IPv4 packet. Required for L4 checksum offload. */
+#define PKT_TX_IPV4 PKT_RX_IPV4_HDR
+
+/** Tell the NIC it's an IPv6 packet. Required for L4 checksum offload. */
+#define PKT_TX_IPV6 PKT_RX_IPV6_HDR
+
+#define PKT_TX_VLAN_PKT (1ULL << 55) /**< TX packet is a 802.1q VLAN packet. */
/* Use final bit of flags to indicate a control mbuf */
#define CTRL_MBUF_FLAG (1ULL << 63) /**< Mbuf contains control data */
union {
uint32_t rss; /**< RSS hash result if RSS enabled */
struct {
- uint16_t hash;
- uint16_t id;
+ union {
+ struct {
+ uint16_t hash;
+ uint16_t id;
+ };
+ uint32_t lo;
+ /**< Second 4 flexible bytes */
+ };
+ uint32_t hi;
+ /**< First 4 flexible bytes or FD ID, dependent on
+ PKT_RX_FDIR_* flag in ol_flags. */
} fdir; /**< Filter identifier if FDIR enabled */
uint32_t sched; /**< Hierarchical scheduler */
uint32_t usr; /**< User defined tags. See @rte_distributor_process */