extern "C" {
#endif
-/* deprecated options */
-#pragma GCC poison RTE_MBUF_SCATTER_GATHER
-#pragma GCC poison RTE_MBUF_REFCNT
-
/*
* Packet Offload Features Flags. It also carry packet type information.
* Critical resources. Both rx/tx shared these bits. Be cautious on any change
#define PKT_RX_FDIR (1ULL << 2) /**< RX packet with FDIR match indicate. */
#define PKT_RX_L4_CKSUM_BAD (1ULL << 3) /**< L4 cksum of RX pkt. is not OK. */
#define PKT_RX_IP_CKSUM_BAD (1ULL << 4) /**< IP cksum of RX pkt. is not OK. */
-#define PKT_RX_EIP_CKSUM_BAD (0ULL << 0) /**< External IP header checksum error. */
+#define PKT_RX_EIP_CKSUM_BAD (1ULL << 5) /**< External IP header checksum error. */
#define PKT_RX_OVERSIZE (0ULL << 0) /**< Num of desc of an RX pkt oversize. */
#define PKT_RX_HBUF_OVERFLOW (0ULL << 0) /**< Header buffer overflow. */
#define PKT_RX_RECIP_ERR (0ULL << 0) /**< Hardware processing error. */
typedef uint64_t MARKER64[0]; /**< marker that allows us to overwrite 8 bytes
* with a single assignment */
-/** Opaque rte_mbuf_offload structure declarations */
-struct rte_mbuf_offload;
-
/**
* The generic rte_mbuf, containing a packet mbuf.
*/
uint16_t vlan_tci_outer; /**< Outer VLAN Tag Control Identifier (CPU order) */
/* second cache line - fields only used in slow path or on TX */
- MARKER cacheline1 __rte_cache_aligned;
+ MARKER cacheline1 __rte_cache_min_aligned;
union {
void *userdata; /**< Can be used for external metadata */
/** Timesync flags for use with IEEE1588. */
uint16_t timesync;
-
- /* Chain of off-load operations to perform on mbuf */
- struct rte_mbuf_offload *offload_ops;
} __rte_cache_aligned;
static inline uint16_t rte_pktmbuf_priv_size(struct rte_mempool *mp);
+/**
+ * Return the DMA address of the beginning of the mbuf data
+ *
+ * @param mb
+ * The pointer to the mbuf.
+ * @return
+ * The physical address of the beginning of the mbuf data
+ */
+static inline phys_addr_t
+rte_mbuf_data_dma_addr(const struct rte_mbuf *mb)
+{
+ return mb->buf_physaddr + mb->data_off;
+}
+
+/**
+ * Return the default DMA address of the beginning of the mbuf data
+ *
+ * This function is used by drivers in their receive function, as it
+ * returns the location where data should be written by the NIC, taking
+ * the default headroom in account.
+ *
+ * @param mb
+ * The pointer to the mbuf.
+ * @return
+ * The physical address of the beginning of the mbuf data
+ */
+static inline phys_addr_t
+rte_mbuf_data_dma_addr_default(const struct rte_mbuf *mb)
+{
+ return mb->buf_physaddr + RTE_PKTMBUF_HEADROOM;
+}
+
/**
* Return the mbuf owning the data buffer address of an indirect mbuf.
*
rte_mbuf_sanity_check(m, is_h); \
} while (0)
-/** MBUF asserts in debug mode */
-#define RTE_MBUF_ASSERT(exp) \
-if (!(exp)) { \
- rte_panic("line%d\tassert \"" #exp "\" failed\n", __LINE__); \
-}
-
#else /* RTE_LIBRTE_MBUF_DEBUG */
/** check mbuf type in debug mode */
/** check mbuf type in debug mode if mbuf pointer is not null */
#define __rte_mbuf_sanity_check_raw(m, is_h) do { } while (0)
-/** MBUF asserts in debug mode */
-#define RTE_MBUF_ASSERT(exp) do { } while (0)
-
#endif /* RTE_LIBRTE_MBUF_DEBUG */
#ifdef RTE_MBUF_REFCNT_ATOMIC
if (rte_mempool_get(mp, &mb) < 0)
return NULL;
m = (struct rte_mbuf *)mb;
- RTE_MBUF_ASSERT(rte_mbuf_refcnt_read(m) == 0);
+ RTE_ASSERT(rte_mbuf_refcnt_read(m) == 0);
rte_mbuf_refcnt_set(m, 1);
return m;
}
static inline void __attribute__((always_inline))
__rte_mbuf_raw_free(struct rte_mbuf *m)
{
- RTE_MBUF_ASSERT(rte_mbuf_refcnt_read(m) == 0);
+ RTE_ASSERT(rte_mbuf_refcnt_read(m) == 0);
rte_mempool_put(m->pool, m);
}
return m;
}
+/**
+ * Allocate a bulk of mbufs, initialize refcnt and reset the fields to default
+ * values.
+ *
+ * @param pool
+ * The mempool from which mbufs are allocated.
+ * @param mbufs
+ * Array of pointers to mbufs
+ * @param count
+ * Array size
+ * @return
+ * - 0: Success
+ */
+static inline int rte_pktmbuf_alloc_bulk(struct rte_mempool *pool,
+ struct rte_mbuf **mbufs, unsigned count)
+{
+ unsigned idx = 0;
+ int rc;
+
+ rc = rte_mempool_get_bulk(pool, (void **)mbufs, count);
+ if (unlikely(rc))
+ return rc;
+
+ /* To understand duff's device on loop unwinding optimization, see
+ * https://en.wikipedia.org/wiki/Duff's_device.
+ * Here while() loop is used rather than do() while{} to avoid extra
+ * check if count is zero.
+ */
+ switch (count % 4) {
+ case 0:
+ while (idx != count) {
+ RTE_ASSERT(rte_mbuf_refcnt_read(mbufs[idx]) == 0);
+ rte_mbuf_refcnt_set(mbufs[idx], 1);
+ rte_pktmbuf_reset(mbufs[idx]);
+ idx++;
+ case 3:
+ RTE_ASSERT(rte_mbuf_refcnt_read(mbufs[idx]) == 0);
+ rte_mbuf_refcnt_set(mbufs[idx], 1);
+ rte_pktmbuf_reset(mbufs[idx]);
+ idx++;
+ case 2:
+ RTE_ASSERT(rte_mbuf_refcnt_read(mbufs[idx]) == 0);
+ rte_mbuf_refcnt_set(mbufs[idx], 1);
+ rte_pktmbuf_reset(mbufs[idx]);
+ idx++;
+ case 1:
+ RTE_ASSERT(rte_mbuf_refcnt_read(mbufs[idx]) == 0);
+ rte_mbuf_refcnt_set(mbufs[idx], 1);
+ rte_pktmbuf_reset(mbufs[idx]);
+ idx++;
+ }
+ }
+ return 0;
+}
+
/**
* Attach packet mbuf to another packet mbuf.
*
{
struct rte_mbuf *md;
- RTE_MBUF_ASSERT(RTE_MBUF_DIRECT(mi) &&
+ RTE_ASSERT(RTE_MBUF_DIRECT(mi) &&
rte_mbuf_refcnt_read(mi) == 1);
/* if m is not direct, get the mbuf that embeds the data */
git.droids-corp.org / dpdk.git / blobdiff