#define PKT_RX_HBUF_OVERFLOW (0ULL << 0) /**< Header buffer overflow. */
#define PKT_RX_RECIP_ERR (0ULL << 0) /**< Hardware processing error. */
#define PKT_RX_MAC_ERR (0ULL << 0) /**< MAC error. */
-#ifndef RTE_NEXT_ABI
-#define PKT_RX_IPV4_HDR (1ULL << 5) /**< RX packet with IPv4 header. */
-#define PKT_RX_IPV4_HDR_EXT (1ULL << 6) /**< RX packet with extended IPv4 header. */
-#define PKT_RX_IPV6_HDR (1ULL << 7) /**< RX packet with IPv6 header. */
-#define PKT_RX_IPV6_HDR_EXT (1ULL << 8) /**< RX packet with extended IPv6 header. */
-#endif /* RTE_NEXT_ABI */
#define PKT_RX_IEEE1588_PTP (1ULL << 9) /**< RX IEEE1588 L2 Ethernet PT Packet. */
#define PKT_RX_IEEE1588_TMST (1ULL << 10) /**< RX IEEE1588 L2/L4 timestamped packet.*/
-#ifndef RTE_NEXT_ABI
-#define PKT_RX_TUNNEL_IPV4_HDR (1ULL << 11) /**< RX tunnel packet with IPv4 header.*/
-#define PKT_RX_TUNNEL_IPV6_HDR (1ULL << 12) /**< RX tunnel packet with IPv6 header. */
-#endif /* RTE_NEXT_ABI */
#define PKT_RX_FDIR_ID (1ULL << 13) /**< FD id reported if FDIR match. */
#define PKT_RX_FDIR_FLX (1ULL << 14) /**< Flexible bytes reported if FDIR match. */
#define PKT_RX_QINQ_PKT (1ULL << 15) /**< RX packet with double VLAN stripped. */
/* Use final bit of flags to indicate a control mbuf */
#define CTRL_MBUF_FLAG (1ULL << 63) /**< Mbuf contains control data */
-#ifdef RTE_NEXT_ABI
/*
* 32 bits are divided into several fields to mark packet types. Note that
* each field is indexical.
RTE_PTYPE_INNER_L2_MASK | \
RTE_PTYPE_INNER_L3_MASK | \
RTE_PTYPE_INNER_L4_MASK))
-#endif /* RTE_NEXT_ABI */
+
+/** Alignment constraint of mbuf private area. */
+#define RTE_MBUF_PRIV_ALIGN 8
/**
* Get the name of a RX offload flag
/* remaining bytes are set on RX when pulling packet from descriptor */
MARKER rx_descriptor_fields1;
-#ifdef RTE_NEXT_ABI
/*
* The packet type, which is the combination of outer/inner L2, L3, L4
* and tunnel types.
uint32_t pkt_len; /**< Total pkt len: sum of all segments. */
uint16_t data_len; /**< Amount of data in segment buffer. */
uint16_t vlan_tci; /**< VLAN Tag Control Identifier (CPU order) */
-#else /* RTE_NEXT_ABI */
- /**
- * The packet type, which is used to indicate ordinary packet and also
- * tunneled packet format, i.e. each number is represented a type of
- * packet.
- */
- uint16_t packet_type;
- uint16_t data_len; /**< Amount of data in segment buffer. */
- uint32_t pkt_len; /**< Total pkt len: sum of all segments. */
- uint16_t vlan_tci; /**< VLAN Tag Control Identifier (CPU order) */
- uint16_t vlan_tci_outer; /**< Outer VLAN Tag Control Identifier (CPU order) */
-#endif /* RTE_NEXT_ABI */
union {
uint32_t rss; /**< RSS hash result if RSS enabled */
struct {
/**< First 4 flexible bytes or FD ID, dependent on
PKT_RX_FDIR_* flag in ol_flags. */
} fdir; /**< Filter identifier if FDIR enabled */
- uint32_t sched; /**< Hierarchical scheduler */
+ struct {
+ uint32_t lo;
+ uint32_t hi;
+ } sched; /**< Hierarchical scheduler */
uint32_t usr; /**< User defined tags. See rte_distributor_process() */
} hash; /**< hash information */
uint32_t seqn; /**< Sequence number. See also rte_reorder_insert() */
-#ifdef RTE_NEXT_ABI
+
uint16_t vlan_tci_outer; /**< Outer VLAN Tag Control Identifier (CPU order) */
-#endif /* RTE_NEXT_ABI */
/* second cache line - fields only used in slow path or on TX */
- MARKER cacheline1 __rte_cache_aligned;
+ MARKER cacheline1 __rte_cache_min_aligned;
union {
void *userdata; /**< Can be used for external metadata */
static inline uint16_t rte_pktmbuf_priv_size(struct rte_mempool *mp);
+/**
+ * Return the DMA address of the beginning of the mbuf data
+ *
+ * @param mb
+ * The pointer to the mbuf.
+ * @return
+ * The physical address of the beginning of the mbuf data
+ */
+static inline phys_addr_t
+rte_mbuf_data_dma_addr(const struct rte_mbuf *mb)
+{
+ return mb->buf_physaddr + mb->data_off;
+}
+
+/**
+ * Return the default DMA address of the beginning of the mbuf data
+ *
+ * This function is used by drivers in their receive function, as it
+ * returns the location where data should be written by the NIC, taking
+ * the default headroom in account.
+ *
+ * @param mb
+ * The pointer to the mbuf.
+ * @return
+ * The physical address of the beginning of the mbuf data
+ */
+static inline phys_addr_t
+rte_mbuf_data_dma_addr_default(const struct rte_mbuf *mb)
+{
+ return mb->buf_physaddr + RTE_PKTMBUF_HEADROOM;
+}
+
/**
* Return the mbuf owning the data buffer address of an indirect mbuf.
*
static inline struct rte_mbuf *
rte_mbuf_from_indirect(struct rte_mbuf *mi)
{
- return RTE_PTR_SUB(mi->buf_addr, sizeof(*mi) + mi->priv_size);
+ return (struct rte_mbuf *)RTE_PTR_SUB(mi->buf_addr, sizeof(*mi) + mi->priv_size);
}
/**
* details.
* @param priv_size
* Size of application private are between the rte_mbuf structure
- * and the data buffer.
+ * and the data buffer. This value must be aligned to RTE_MBUF_PRIV_ALIGN.
* @param data_room_size
* Size of data buffer in each mbuf, including RTE_PKTMBUF_HEADROOM.
* @param socket_id
* with rte_errno set appropriately. Possible rte_errno values include:
* - E_RTE_NO_CONFIG - function could not get pointer to rte_config structure
* - E_RTE_SECONDARY - function was called from a secondary process instance
- * - EINVAL - cache size provided is too large
+ * - EINVAL - cache size provided is too large, or priv_size is not aligned.
* - ENOSPC - the maximum number of memzones has already been allocated
* - EEXIST - a memzone with the same name already exists
* - ENOMEM - no appropriate memory area found in which to create memzone
return m;
}
+/**
+ * Allocate a bulk of mbufs, initialize refcnt and reset the fields to default
+ * values.
+ *
+ * @param pool
+ * The mempool from which mbufs are allocated.
+ * @param mbufs
+ * Array of pointers to mbufs
+ * @param count
+ * Array size
+ * @return
+ * - 0: Success
+ */
+static inline int rte_pktmbuf_alloc_bulk(struct rte_mempool *pool,
+ struct rte_mbuf **mbufs, unsigned count)
+{
+ unsigned idx = 0;
+ int rc;
+
+ rc = rte_mempool_get_bulk(pool, (void **)mbufs, count);
+ if (unlikely(rc))
+ return rc;
+
+ /* To understand duff's device on loop unwinding optimization, see
+ * https://en.wikipedia.org/wiki/Duff's_device.
+ * Here while() loop is used rather than do() while{} to avoid extra
+ * check if count is zero.
+ */
+ switch (count % 4) {
+ case 0:
+ while (idx != count) {
+ RTE_MBUF_ASSERT(rte_mbuf_refcnt_read(mbufs[idx]) == 0);
+ rte_mbuf_refcnt_set(mbufs[idx], 1);
+ rte_pktmbuf_reset(mbufs[idx]);
+ idx++;
+ case 3:
+ RTE_MBUF_ASSERT(rte_mbuf_refcnt_read(mbufs[idx]) == 0);
+ rte_mbuf_refcnt_set(mbufs[idx], 1);
+ rte_pktmbuf_reset(mbufs[idx]);
+ idx++;
+ case 2:
+ RTE_MBUF_ASSERT(rte_mbuf_refcnt_read(mbufs[idx]) == 0);
+ rte_mbuf_refcnt_set(mbufs[idx], 1);
+ rte_pktmbuf_reset(mbufs[idx]);
+ idx++;
+ case 1:
+ RTE_MBUF_ASSERT(rte_mbuf_refcnt_read(mbufs[idx]) == 0);
+ rte_mbuf_refcnt_set(mbufs[idx], 1);
+ rte_pktmbuf_reset(mbufs[idx]);
+ idx++;
+ }
+ }
+ return 0;
+}
+
/**
* Attach packet mbuf to another packet mbuf.
*
*/
#define rte_pktmbuf_mtod(m, t) rte_pktmbuf_mtod_offset(m, t, 0)
+/**
+ * A macro that returns the physical address that points to an offset of the
+ * start of the data in the mbuf
+ *
+ * @param m
+ * The packet mbuf.
+ * @param o
+ * The offset into the data to calculate address from.
+ */
+#define rte_pktmbuf_mtophys_offset(m, o) \
+ (phys_addr_t)((m)->buf_physaddr + (m)->data_off + (o))
+
+/**
+ * A macro that returns the physical address that points to the start of the
+ * data in the mbuf
+ *
+ * @param m
+ * The packet mbuf.
+ */
+#define rte_pktmbuf_mtophys(m) rte_pktmbuf_mtophys_offset(m, 0)
+
/**
* A macro that returns the length of the packet.
*
return !!(m->nb_segs == 1);
}
+/**
+ * Chain an mbuf to another, thereby creating a segmented packet.
+ *
+ * Note: The implementation will do a linear walk over the segments to find
+ * the tail entry. For cases when there are many segments, it's better to
+ * chain the entries manually.
+ *
+ * @param head
+ * The head of the mbuf chain (the first packet)
+ * @param tail
+ * The mbuf to put last in the chain
+ *
+ * @return
+ * - 0, on success.
+ * - -EOVERFLOW, if the chain is full (256 entries)
+ */
+static inline int rte_pktmbuf_chain(struct rte_mbuf *head, struct rte_mbuf *tail)
+{
+ struct rte_mbuf *cur_tail;
+
+ /* Check for number-of-segments-overflow */
+ if (head->nb_segs + tail->nb_segs >= 1 << (sizeof(head->nb_segs) * 8))
+ return -EOVERFLOW;
+
+ /* Chain 'tail' onto the old tail */
+ cur_tail = rte_pktmbuf_lastseg(head);
+ cur_tail->next = tail;
+
+ /* accumulate number of segments and total length. */
+ head->nb_segs = (uint8_t)(head->nb_segs + tail->nb_segs);
+ head->pkt_len += tail->pkt_len;
+
+ /* pkt_len is only set in the head */
+ tail->pkt_len = tail->data_len;
+
+ return 0;
+}
+
/**
* Dump an mbuf structure to the console.
*
git.droids-corp.org / dpdk.git / blobdiff