#include <rte_atomic.h>
#include <rte_prefetch.h>
#include <rte_branch_prediction.h>
+#include <rte_mbuf_ptype.h>
#ifdef __cplusplus
extern "C" {
/* add new TX flags here */
+/**
+ * Bits 45:48 used for the tunnel type.
+ * When doing Tx offload like TSO or checksum, the HW needs to configure the
+ * tunnel type into the HW descriptors.
+ */
+#define PKT_TX_TUNNEL_VXLAN (0x1ULL << 45)
+#define PKT_TX_TUNNEL_GRE (0x2ULL << 45)
+#define PKT_TX_TUNNEL_IPIP (0x3ULL << 45)
+#define PKT_TX_TUNNEL_GENEVE (0x4ULL << 45)
+/* add new TX TUNNEL type here */
+#define PKT_TX_TUNNEL_MASK (0xFULL << 45)
+
/**
* Second VLAN insertion (QinQ) flag.
*/
/* Use final bit of flags to indicate a control mbuf */
#define CTRL_MBUF_FLAG (1ULL << 63) /**< Mbuf contains control data */
-/*
- * 32 bits are divided into several fields to mark packet types. Note that
- * each field is indexical.
- * - Bit 3:0 is for L2 types.
- * - Bit 7:4 is for L3 or outer L3 (for tunneling case) types.
- * - Bit 11:8 is for L4 or outer L4 (for tunneling case) types.
- * - Bit 15:12 is for tunnel types.
- * - Bit 19:16 is for inner L2 types.
- * - Bit 23:20 is for inner L3 types.
- * - Bit 27:24 is for inner L4 types.
- * - Bit 31:28 is reserved.
- *
- * To be compatible with Vector PMD, RTE_PTYPE_L3_IPV4, RTE_PTYPE_L3_IPV4_EXT,
- * RTE_PTYPE_L3_IPV6, RTE_PTYPE_L3_IPV6_EXT, RTE_PTYPE_L4_TCP, RTE_PTYPE_L4_UDP
- * and RTE_PTYPE_L4_SCTP should be kept as below in a contiguous 7 bits.
- *
- * Note that L3 types values are selected for checking IPV4/IPV6 header from
- * performance point of view. Reading annotations of RTE_ETH_IS_IPV4_HDR and
- * RTE_ETH_IS_IPV6_HDR is needed for any future changes of L3 type values.
- *
- * Note that the packet types of the same packet recognized by different
- * hardware may be different, as different hardware may have different
- * capability of packet type recognition.
- *
- * examples:
- * <'ether type'=0x0800
- * | 'version'=4, 'protocol'=0x29
- * | 'version'=6, 'next header'=0x3A
- * | 'ICMPv6 header'>
- * will be recognized on i40e hardware as packet type combination of,
- * RTE_PTYPE_L2_ETHER |
- * RTE_PTYPE_L3_IPV4_EXT_UNKNOWN |
- * RTE_PTYPE_TUNNEL_IP |
- * RTE_PTYPE_INNER_L3_IPV6_EXT_UNKNOWN |
- * RTE_PTYPE_INNER_L4_ICMP.
- *
- * <'ether type'=0x86DD
- * | 'version'=6, 'next header'=0x2F
- * | 'GRE header'
- * | 'version'=6, 'next header'=0x11
- * | 'UDP header'>
- * will be recognized on i40e hardware as packet type combination of,
- * RTE_PTYPE_L2_ETHER |
- * RTE_PTYPE_L3_IPV6_EXT_UNKNOWN |
- * RTE_PTYPE_TUNNEL_GRENAT |
- * RTE_PTYPE_INNER_L3_IPV6_EXT_UNKNOWN |
- * RTE_PTYPE_INNER_L4_UDP.
- */
-#define RTE_PTYPE_UNKNOWN 0x00000000
-/**
- * Ethernet packet type.
- * It is used for outer packet for tunneling cases.
- *
- * Packet format:
- * <'ether type'=[0x0800|0x86DD]>
- */
-#define RTE_PTYPE_L2_ETHER 0x00000001
-/**
- * Ethernet packet type for time sync.
- *
- * Packet format:
- * <'ether type'=0x88F7>
- */
-#define RTE_PTYPE_L2_ETHER_TIMESYNC 0x00000002
-/**
- * ARP (Address Resolution Protocol) packet type.
- *
- * Packet format:
- * <'ether type'=0x0806>
- */
-#define RTE_PTYPE_L2_ETHER_ARP 0x00000003
-/**
- * LLDP (Link Layer Discovery Protocol) packet type.
- *
- * Packet format:
- * <'ether type'=0x88CC>
- */
-#define RTE_PTYPE_L2_ETHER_LLDP 0x00000004
-/**
- * NSH (Network Service Header) packet type.
- *
- * Packet format:
- * <'ether type'=0x894F>
- */
-#define RTE_PTYPE_L2_ETHER_NSH 0x00000005
-/**
- * Mask of layer 2 packet types.
- * It is used for outer packet for tunneling cases.
- */
-#define RTE_PTYPE_L2_MASK 0x0000000f
-/**
- * IP (Internet Protocol) version 4 packet type.
- * It is used for outer packet for tunneling cases, and does not contain any
- * header option.
- *
- * Packet format:
- * <'ether type'=0x0800
- * | 'version'=4, 'ihl'=5>
- */
-#define RTE_PTYPE_L3_IPV4 0x00000010
-/**
- * IP (Internet Protocol) version 4 packet type.
- * It is used for outer packet for tunneling cases, and contains header
- * options.
- *
- * Packet format:
- * <'ether type'=0x0800
- * | 'version'=4, 'ihl'=[6-15], 'options'>
- */
-#define RTE_PTYPE_L3_IPV4_EXT 0x00000030
-/**
- * IP (Internet Protocol) version 6 packet type.
- * It is used for outer packet for tunneling cases, and does not contain any
- * extension header.
- *
- * Packet format:
- * <'ether type'=0x86DD
- * | 'version'=6, 'next header'=0x3B>
- */
-#define RTE_PTYPE_L3_IPV6 0x00000040
-/**
- * IP (Internet Protocol) version 4 packet type.
- * It is used for outer packet for tunneling cases, and may or maynot contain
- * header options.
- *
- * Packet format:
- * <'ether type'=0x0800
- * | 'version'=4, 'ihl'=[5-15], <'options'>>
- */
-#define RTE_PTYPE_L3_IPV4_EXT_UNKNOWN 0x00000090
-/**
- * IP (Internet Protocol) version 6 packet type.
- * It is used for outer packet for tunneling cases, and contains extension
- * headers.
- *
- * Packet format:
- * <'ether type'=0x86DD
- * | 'version'=6, 'next header'=[0x0|0x2B|0x2C|0x32|0x33|0x3C|0x87],
- * 'extension headers'>
- */
-#define RTE_PTYPE_L3_IPV6_EXT 0x000000c0
-/**
- * IP (Internet Protocol) version 6 packet type.
- * It is used for outer packet for tunneling cases, and may or maynot contain
- * extension headers.
- *
- * Packet format:
- * <'ether type'=0x86DD
- * | 'version'=6, 'next header'=[0x3B|0x0|0x2B|0x2C|0x32|0x33|0x3C|0x87],
- * <'extension headers'>>
- */
-#define RTE_PTYPE_L3_IPV6_EXT_UNKNOWN 0x000000e0
-/**
- * Mask of layer 3 packet types.
- * It is used for outer packet for tunneling cases.
- */
-#define RTE_PTYPE_L3_MASK 0x000000f0
-/**
- * TCP (Transmission Control Protocol) packet type.
- * It is used for outer packet for tunneling cases.
- *
- * Packet format:
- * <'ether type'=0x0800
- * | 'version'=4, 'protocol'=6, 'MF'=0>
- * or,
- * <'ether type'=0x86DD
- * | 'version'=6, 'next header'=6>
- */
-#define RTE_PTYPE_L4_TCP 0x00000100
-/**
- * UDP (User Datagram Protocol) packet type.
- * It is used for outer packet for tunneling cases.
- *
- * Packet format:
- * <'ether type'=0x0800
- * | 'version'=4, 'protocol'=17, 'MF'=0>
- * or,
- * <'ether type'=0x86DD
- * | 'version'=6, 'next header'=17>
- */
-#define RTE_PTYPE_L4_UDP 0x00000200
-/**
- * Fragmented IP (Internet Protocol) packet type.
- * It is used for outer packet for tunneling cases.
- *
- * It refers to those packets of any IP types, which can be recognized as
- * fragmented. A fragmented packet cannot be recognized as any other L4 types
- * (RTE_PTYPE_L4_TCP, RTE_PTYPE_L4_UDP, RTE_PTYPE_L4_SCTP, RTE_PTYPE_L4_ICMP,
- * RTE_PTYPE_L4_NONFRAG).
- *
- * Packet format:
- * <'ether type'=0x0800
- * | 'version'=4, 'MF'=1>
- * or,
- * <'ether type'=0x86DD
- * | 'version'=6, 'next header'=44>
- */
-#define RTE_PTYPE_L4_FRAG 0x00000300
-/**
- * SCTP (Stream Control Transmission Protocol) packet type.
- * It is used for outer packet for tunneling cases.
- *
- * Packet format:
- * <'ether type'=0x0800
- * | 'version'=4, 'protocol'=132, 'MF'=0>
- * or,
- * <'ether type'=0x86DD
- * | 'version'=6, 'next header'=132>
- */
-#define RTE_PTYPE_L4_SCTP 0x00000400
-/**
- * ICMP (Internet Control Message Protocol) packet type.
- * It is used for outer packet for tunneling cases.
- *
- * Packet format:
- * <'ether type'=0x0800
- * | 'version'=4, 'protocol'=1, 'MF'=0>
- * or,
- * <'ether type'=0x86DD
- * | 'version'=6, 'next header'=1>
- */
-#define RTE_PTYPE_L4_ICMP 0x00000500
-/**
- * Non-fragmented IP (Internet Protocol) packet type.
- * It is used for outer packet for tunneling cases.
- *
- * It refers to those packets of any IP types, while cannot be recognized as
- * any of above L4 types (RTE_PTYPE_L4_TCP, RTE_PTYPE_L4_UDP,
- * RTE_PTYPE_L4_FRAG, RTE_PTYPE_L4_SCTP, RTE_PTYPE_L4_ICMP).
- *
- * Packet format:
- * <'ether type'=0x0800
- * | 'version'=4, 'protocol'!=[6|17|132|1], 'MF'=0>
- * or,
- * <'ether type'=0x86DD
- * | 'version'=6, 'next header'!=[6|17|44|132|1]>
- */
-#define RTE_PTYPE_L4_NONFRAG 0x00000600
-/**
- * Mask of layer 4 packet types.
- * It is used for outer packet for tunneling cases.
- */
-#define RTE_PTYPE_L4_MASK 0x00000f00
-/**
- * IP (Internet Protocol) in IP (Internet Protocol) tunneling packet type.
- *
- * Packet format:
- * <'ether type'=0x0800
- * | 'version'=4, 'protocol'=[4|41]>
- * or,
- * <'ether type'=0x86DD
- * | 'version'=6, 'next header'=[4|41]>
- */
-#define RTE_PTYPE_TUNNEL_IP 0x00001000
-/**
- * GRE (Generic Routing Encapsulation) tunneling packet type.
- *
- * Packet format:
- * <'ether type'=0x0800
- * | 'version'=4, 'protocol'=47>
- * or,
- * <'ether type'=0x86DD
- * | 'version'=6, 'next header'=47>
- */
-#define RTE_PTYPE_TUNNEL_GRE 0x00002000
-/**
- * VXLAN (Virtual eXtensible Local Area Network) tunneling packet type.
- *
- * Packet format:
- * <'ether type'=0x0800
- * | 'version'=4, 'protocol'=17
- * | 'destination port'=4798>
- * or,
- * <'ether type'=0x86DD
- * | 'version'=6, 'next header'=17
- * | 'destination port'=4798>
- */
-#define RTE_PTYPE_TUNNEL_VXLAN 0x00003000
-/**
- * NVGRE (Network Virtualization using Generic Routing Encapsulation) tunneling
- * packet type.
- *
- * Packet format:
- * <'ether type'=0x0800
- * | 'version'=4, 'protocol'=47
- * | 'protocol type'=0x6558>
- * or,
- * <'ether type'=0x86DD
- * | 'version'=6, 'next header'=47
- * | 'protocol type'=0x6558'>
- */
-#define RTE_PTYPE_TUNNEL_NVGRE 0x00004000
-/**
- * GENEVE (Generic Network Virtualization Encapsulation) tunneling packet type.
- *
- * Packet format:
- * <'ether type'=0x0800
- * | 'version'=4, 'protocol'=17
- * | 'destination port'=6081>
- * or,
- * <'ether type'=0x86DD
- * | 'version'=6, 'next header'=17
- * | 'destination port'=6081>
- */
-#define RTE_PTYPE_TUNNEL_GENEVE 0x00005000
-/**
- * Tunneling packet type of Teredo, VXLAN (Virtual eXtensible Local Area
- * Network) or GRE (Generic Routing Encapsulation) could be recognized as this
- * packet type, if they can not be recognized independently as of hardware
- * capability.
- */
-#define RTE_PTYPE_TUNNEL_GRENAT 0x00006000
-/**
- * Mask of tunneling packet types.
- */
-#define RTE_PTYPE_TUNNEL_MASK 0x0000f000
-/**
- * Ethernet packet type.
- * It is used for inner packet type only.
- *
- * Packet format (inner only):
- * <'ether type'=[0x800|0x86DD]>
- */
-#define RTE_PTYPE_INNER_L2_ETHER 0x00010000
-/**
- * Ethernet packet type with VLAN (Virtual Local Area Network) tag.
- *
- * Packet format (inner only):
- * <'ether type'=[0x800|0x86DD], vlan=[1-4095]>
- */
-#define RTE_PTYPE_INNER_L2_ETHER_VLAN 0x00020000
-/**
- * Mask of inner layer 2 packet types.
- */
-#define RTE_PTYPE_INNER_L2_MASK 0x000f0000
-/**
- * IP (Internet Protocol) version 4 packet type.
- * It is used for inner packet only, and does not contain any header option.
- *
- * Packet format (inner only):
- * <'ether type'=0x0800
- * | 'version'=4, 'ihl'=5>
- */
-#define RTE_PTYPE_INNER_L3_IPV4 0x00100000
-/**
- * IP (Internet Protocol) version 4 packet type.
- * It is used for inner packet only, and contains header options.
- *
- * Packet format (inner only):
- * <'ether type'=0x0800
- * | 'version'=4, 'ihl'=[6-15], 'options'>
- */
-#define RTE_PTYPE_INNER_L3_IPV4_EXT 0x00200000
-/**
- * IP (Internet Protocol) version 6 packet type.
- * It is used for inner packet only, and does not contain any extension header.
- *
- * Packet format (inner only):
- * <'ether type'=0x86DD
- * | 'version'=6, 'next header'=0x3B>
- */
-#define RTE_PTYPE_INNER_L3_IPV6 0x00300000
-/**
- * IP (Internet Protocol) version 4 packet type.
- * It is used for inner packet only, and may or maynot contain header options.
- *
- * Packet format (inner only):
- * <'ether type'=0x0800
- * | 'version'=4, 'ihl'=[5-15], <'options'>>
- */
-#define RTE_PTYPE_INNER_L3_IPV4_EXT_UNKNOWN 0x00400000
-/**
- * IP (Internet Protocol) version 6 packet type.
- * It is used for inner packet only, and contains extension headers.
- *
- * Packet format (inner only):
- * <'ether type'=0x86DD
- * | 'version'=6, 'next header'=[0x0|0x2B|0x2C|0x32|0x33|0x3C|0x87],
- * 'extension headers'>
- */
-#define RTE_PTYPE_INNER_L3_IPV6_EXT 0x00500000
-/**
- * IP (Internet Protocol) version 6 packet type.
- * It is used for inner packet only, and may or maynot contain extension
- * headers.
- *
- * Packet format (inner only):
- * <'ether type'=0x86DD
- * | 'version'=6, 'next header'=[0x3B|0x0|0x2B|0x2C|0x32|0x33|0x3C|0x87],
- * <'extension headers'>>
- */
-#define RTE_PTYPE_INNER_L3_IPV6_EXT_UNKNOWN 0x00600000
-/**
- * Mask of inner layer 3 packet types.
- */
-#define RTE_PTYPE_INNER_L3_MASK 0x00f00000
-/**
- * TCP (Transmission Control Protocol) packet type.
- * It is used for inner packet only.
- *
- * Packet format (inner only):
- * <'ether type'=0x0800
- * | 'version'=4, 'protocol'=6, 'MF'=0>
- * or,
- * <'ether type'=0x86DD
- * | 'version'=6, 'next header'=6>
- */
-#define RTE_PTYPE_INNER_L4_TCP 0x01000000
-/**
- * UDP (User Datagram Protocol) packet type.
- * It is used for inner packet only.
- *
- * Packet format (inner only):
- * <'ether type'=0x0800
- * | 'version'=4, 'protocol'=17, 'MF'=0>
- * or,
- * <'ether type'=0x86DD
- * | 'version'=6, 'next header'=17>
- */
-#define RTE_PTYPE_INNER_L4_UDP 0x02000000
-/**
- * Fragmented IP (Internet Protocol) packet type.
- * It is used for inner packet only, and may or maynot have layer 4 packet.
- *
- * Packet format (inner only):
- * <'ether type'=0x0800
- * | 'version'=4, 'MF'=1>
- * or,
- * <'ether type'=0x86DD
- * | 'version'=6, 'next header'=44>
- */
-#define RTE_PTYPE_INNER_L4_FRAG 0x03000000
-/**
- * SCTP (Stream Control Transmission Protocol) packet type.
- * It is used for inner packet only.
- *
- * Packet format (inner only):
- * <'ether type'=0x0800
- * | 'version'=4, 'protocol'=132, 'MF'=0>
- * or,
- * <'ether type'=0x86DD
- * | 'version'=6, 'next header'=132>
- */
-#define RTE_PTYPE_INNER_L4_SCTP 0x04000000
-/**
- * ICMP (Internet Control Message Protocol) packet type.
- * It is used for inner packet only.
- *
- * Packet format (inner only):
- * <'ether type'=0x0800
- * | 'version'=4, 'protocol'=1, 'MF'=0>
- * or,
- * <'ether type'=0x86DD
- * | 'version'=6, 'next header'=1>
- */
-#define RTE_PTYPE_INNER_L4_ICMP 0x05000000
-/**
- * Non-fragmented IP (Internet Protocol) packet type.
- * It is used for inner packet only, and may or maynot have other unknown layer
- * 4 packet types.
- *
- * Packet format (inner only):
- * <'ether type'=0x0800
- * | 'version'=4, 'protocol'!=[6|17|132|1], 'MF'=0>
- * or,
- * <'ether type'=0x86DD
- * | 'version'=6, 'next header'!=[6|17|44|132|1]>
- */
-#define RTE_PTYPE_INNER_L4_NONFRAG 0x06000000
-/**
- * Mask of inner layer 4 packet types.
- */
-#define RTE_PTYPE_INNER_L4_MASK 0x0f000000
-
-/**
- * Check if the (outer) L3 header is IPv4. To avoid comparing IPv4 types one by
- * one, bit 4 is selected to be used for IPv4 only. Then checking bit 4 can
- * determine if it is an IPV4 packet.
- */
-#define RTE_ETH_IS_IPV4_HDR(ptype) ((ptype) & RTE_PTYPE_L3_IPV4)
-
-/**
- * Check if the (outer) L3 header is IPv4. To avoid comparing IPv4 types one by
- * one, bit 6 is selected to be used for IPv4 only. Then checking bit 6 can
- * determine if it is an IPV4 packet.
- */
-#define RTE_ETH_IS_IPV6_HDR(ptype) ((ptype) & RTE_PTYPE_L3_IPV6)
-
-/* Check if it is a tunneling packet */
-#define RTE_ETH_IS_TUNNEL_PKT(ptype) ((ptype) & (RTE_PTYPE_TUNNEL_MASK | \
- RTE_PTYPE_INNER_L2_MASK | \
- RTE_PTYPE_INNER_L3_MASK | \
- RTE_PTYPE_INNER_L4_MASK))
-
/** Alignment constraint of mbuf private area. */
#define RTE_MBUF_PRIV_ALIGN 8
* or non-atomic) is controlled by the CONFIG_RTE_MBUF_REFCNT_ATOMIC
* config option.
*/
+ RTE_STD_C11
union {
rte_atomic16_t refcnt_atomic; /**< Atomically accessed refcnt */
uint16_t refcnt; /**< Non-atomically accessed refcnt */
* would have RTE_PTYPE_L2_ETHER and not RTE_PTYPE_L2_VLAN because the
* vlan is stripped from the data.
*/
+ RTE_STD_C11
union {
uint32_t packet_type; /**< L2/L3/L4 and tunnel information. */
struct {
union {
uint32_t rss; /**< RSS hash result if RSS enabled */
struct {
+ RTE_STD_C11
union {
struct {
uint16_t hash;
/* second cache line - fields only used in slow path or on TX */
MARKER cacheline1 __rte_cache_min_aligned;
+ RTE_STD_C11
union {
void *userdata; /**< Can be used for external metadata */
uint64_t udata64; /**< Allow 8-byte userdata on 32-bit */
struct rte_mbuf *next; /**< Next segment of scattered packet. */
/* fields to support TX offloads */
+ RTE_STD_C11
union {
uint64_t tx_offload; /**< combined for easy fetch */
__extension__
struct {
- uint64_t l2_len:7; /**< L2 (MAC) Header Length. */
+ uint64_t l2_len:7;
+ /**< L2 (MAC) Header Length for non-tunneling pkt.
+ * Outer_L4_len + ... + Inner_L2_len for tunneling pkt.
+ */
uint64_t l3_len:9; /**< L3 (IP) Header Length. */
uint64_t l4_len:8; /**< L4 (TCP/UDP) Header Length. */
uint64_t tso_segsz:16; /**< TCP TSO segment size */
return mbp_priv->mbuf_priv_size;
}
+/**
+ * Reset the data_off field of a packet mbuf to its default value.
+ *
+ * The given mbuf must have only one segment, which should be empty.
+ *
+ * @param m
+ * The packet mbuf's data_off field has to be reset.
+ */
+static inline void rte_pktmbuf_reset_headroom(struct rte_mbuf *m)
+{
+ m->data_off = RTE_MIN(RTE_PKTMBUF_HEADROOM, (uint16_t)m->buf_len);
+}
+
/**
* Reset the fields of a packet mbuf to their default values.
*
m->ol_flags = 0;
m->packet_type = 0;
- m->data_off = (RTE_PKTMBUF_HEADROOM <= m->buf_len) ?
- RTE_PKTMBUF_HEADROOM : m->buf_len;
+ rte_pktmbuf_reset_headroom(m);
m->data_len = 0;
__rte_mbuf_sanity_check(m, 1);
m->buf_addr = (char *)m + mbuf_size;
m->buf_physaddr = rte_mempool_virt2phy(mp, m) + mbuf_size;
m->buf_len = (uint16_t)buf_len;
- m->data_off = RTE_MIN(RTE_PKTMBUF_HEADROOM, (uint16_t)m->buf_len);
+ rte_pktmbuf_reset_headroom(m);
m->data_len = 0;
m->ol_flags = 0;
return !!(m->nb_segs == 1);
}
+/**
+ * @internal used by rte_pktmbuf_read().
+ */
+const void *__rte_pktmbuf_read(const struct rte_mbuf *m, uint32_t off,
+ uint32_t len, void *buf);
+
+/**
+ * Read len data bytes in a mbuf at specified offset.
+ *
+ * If the data is contiguous, return the pointer in the mbuf data, else
+ * copy the data in the buffer provided by the user and return its
+ * pointer.
+ *
+ * @param m
+ * The pointer to the mbuf.
+ * @param off
+ * The offset of the data in the mbuf.
+ * @param len
+ * The amount of bytes to read.
+ * @param buf
+ * The buffer where data is copied if it is not contigous in mbuf
+ * data. Its length should be at least equal to the len parameter.
+ * @return
+ * The pointer to the data, either in the mbuf if it is contiguous,
+ * or in the user buffer. If mbuf is too small, NULL is returned.
+ */
+static inline const void *rte_pktmbuf_read(const struct rte_mbuf *m,
+ uint32_t off, uint32_t len, void *buf)
+{
+ if (likely(off + len <= rte_pktmbuf_data_len(m)))
+ return rte_pktmbuf_mtod_offset(m, char *, off);
+ else
+ return __rte_pktmbuf_read(m, off, len, buf);
+}
+
/**
* Chain an mbuf to another, thereby creating a segmented packet.
*
git.droids-corp.org / dpdk.git / blobdiff