/*-
* BSD LICENSE
- *
- * Copyright(c) 2010-2013 Intel Corporation. All rights reserved.
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * Copyright 2014 6WIND S.A.
* All rights reserved.
- *
+ *
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
- *
+ *
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* * Neither the name of Intel Corporation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
- *
+ *
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* buffers. The message buffers are stored in a mempool, using the
* RTE mempool library.
*
- * This library provide an API to allocate/free mbufs, manipulate
- * control message buffer (ctrlmbuf), which are generic message
- * buffers, and packet buffers (pktmbuf), which are used to carry
- * network packets.
+ * This library provide an API to allocate/free packet mbufs, which are
+ * used to carry network packets.
*
* To understand the concepts of packet buffers or mbufs, you
* should read "TCP/IP Illustrated, Volume 2: The Implementation,
* Addison-Wesley, 1995, ISBN 0-201-63354-X from Richard Stevens"
* http://www.kohala.com/start/tcpipiv2.html
- *
- * The main modification of this implementation is the use of mbuf for
- * transports other than packets. mbufs can have other types.
*/
#include <stdint.h>
+#include <rte_common.h>
#include <rte_mempool.h>
+#include <rte_memory.h>
#include <rte_atomic.h>
#include <rte_prefetch.h>
#include <rte_branch_prediction.h>
extern "C" {
#endif
-/**
- * A control message buffer.
- */
-struct rte_ctrlmbuf {
- void *data; /**< Pointer to data. */
- uint32_t data_len; /**< Length of data. */
-};
-
+/* deprecated options */
+#pragma GCC poison RTE_MBUF_SCATTER_GATHER
+#pragma GCC poison RTE_MBUF_REFCNT
/*
* Packet Offload Features Flags. It also carry packet type information.
* Critical resources. Both rx/tx shared these bits. Be cautious on any change
+ *
+ * - RX flags start at bit position zero, and get added to the left of previous
+ * flags.
+ * - The most-significant 8 bits are reserved for generic mbuf flags
+ * - TX flags therefore start at bit position 55 (i.e. 63-8), and new flags get
+ * added to the right of the previously defined flags
+ *
+ * Keep these flags synchronized with rte_get_rx_ol_flag_name() and
+ * rte_get_tx_ol_flag_name().
*/
-#define PKT_RX_VLAN_PKT 0x0001 /**< RX packet is a 802.1q VLAN packet. */
-#define PKT_RX_RSS_HASH 0x0002 /**< RX packet with RSS hash result. */
-#define PKT_RX_FDIR 0x0004 /**< RX packet with FDIR infos. */
-#define PKT_RX_L4_CKSUM_BAD 0x0008 /**< L4 cksum of RX pkt. is not OK. */
-#define PKT_RX_IP_CKSUM_BAD 0x0010 /**< IP cksum of RX pkt. is not OK. */
-#define PKT_RX_IPV4_HDR 0x0020 /**< RX packet with IPv4 header. */
-#define PKT_RX_IPV4_HDR_EXT 0x0040 /**< RX packet with extended IPv4 header. */
-#define PKT_RX_IPV6_HDR 0x0080 /**< RX packet with IPv6 header. */
-#define PKT_RX_IPV6_HDR_EXT 0x0100 /**< RX packet with extended IPv6 header. */
-#define PKT_RX_IEEE1588_PTP 0x0200 /**< RX IEEE1588 L2 Ethernet PT Packet. */
-#define PKT_RX_IEEE1588_TMST 0x0400 /**< RX IEEE1588 L2/L4 timestamped packet.*/
-
-#define PKT_TX_VLAN_PKT 0x0800 /**< TX packet is a 802.1q VLAN packet. */
-#define PKT_TX_IP_CKSUM 0x1000 /**< IP cksum of TX pkt. computed by NIC. */
-/*
- * Bit 14~13 used for L4 packet type with checksum enabled.
- * 00: Reserved
- * 01: TCP checksum
- * 10: SCTP checksum
- * 11: UDP checksum
+#define PKT_RX_VLAN_PKT (1ULL << 0) /**< RX packet is a 802.1q VLAN packet. */
+#define PKT_RX_RSS_HASH (1ULL << 1) /**< RX packet with RSS hash result. */
+#define PKT_RX_FDIR (1ULL << 2) /**< RX packet with FDIR match indicate. */
+#define PKT_RX_L4_CKSUM_BAD (1ULL << 3) /**< L4 cksum of RX pkt. is not OK. */
+#define PKT_RX_IP_CKSUM_BAD (1ULL << 4) /**< IP cksum of RX pkt. is not OK. */
+#define PKT_RX_EIP_CKSUM_BAD (0ULL << 0) /**< External IP header checksum error. */
+#define PKT_RX_OVERSIZE (0ULL << 0) /**< Num of desc of an RX pkt oversize. */
+#define PKT_RX_HBUF_OVERFLOW (0ULL << 0) /**< Header buffer overflow. */
+#define PKT_RX_RECIP_ERR (0ULL << 0) /**< Hardware processing error. */
+#define PKT_RX_MAC_ERR (0ULL << 0) /**< MAC error. */
+#define PKT_RX_IPV4_HDR (1ULL << 5) /**< RX packet with IPv4 header. */
+#define PKT_RX_IPV4_HDR_EXT (1ULL << 6) /**< RX packet with extended IPv4 header. */
+#define PKT_RX_IPV6_HDR (1ULL << 7) /**< RX packet with IPv6 header. */
+#define PKT_RX_IPV6_HDR_EXT (1ULL << 8) /**< RX packet with extended IPv6 header. */
+#define PKT_RX_IEEE1588_PTP (1ULL << 9) /**< RX IEEE1588 L2 Ethernet PT Packet. */
+#define PKT_RX_IEEE1588_TMST (1ULL << 10) /**< RX IEEE1588 L2/L4 timestamped packet.*/
+#define PKT_RX_TUNNEL_IPV4_HDR (1ULL << 11) /**< RX tunnel packet with IPv4 header.*/
+#define PKT_RX_TUNNEL_IPV6_HDR (1ULL << 12) /**< RX tunnel packet with IPv6 header. */
+#define PKT_RX_FDIR_ID (1ULL << 13) /**< FD id reported if FDIR match. */
+#define PKT_RX_FDIR_FLX (1ULL << 14) /**< Flexible bytes reported if FDIR match. */
+#define PKT_RX_QINQ_PKT (1ULL << 15) /**< RX packet with double VLAN stripped. */
+/* add new RX flags here */
+
+/* add new TX flags here */
+
+/**
+ * Second VLAN insertion (QinQ) flag.
*/
-#define PKT_TX_L4_MASK 0x6000 /**< Mask bits for L4 checksum offload request. */
-#define PKT_TX_L4_NO_CKSUM 0x0000 /**< Disable L4 cksum of TX pkt. */
-#define PKT_TX_TCP_CKSUM 0x2000 /**< TCP cksum of TX pkt. computed by NIC. */
-#define PKT_TX_SCTP_CKSUM 0x4000 /**< SCTP cksum of TX pkt. computed by NIC. */
-#define PKT_TX_UDP_CKSUM 0x6000 /**< UDP cksum of TX pkt. computed by NIC. */
-/* Bit 15 */
-#define PKT_TX_IEEE1588_TMST 0x8000 /**< TX IEEE1588 packet to timestamp. */
+#define PKT_TX_QINQ_PKT (1ULL << 49) /**< TX packet with double VLAN inserted. */
/**
- * Bit Mask to indicate what bits required for building TX context
+ * TCP segmentation offload. To enable this offload feature for a
+ * packet to be transmitted on hardware supporting TSO:
+ * - set the PKT_TX_TCP_SEG flag in mbuf->ol_flags (this flag implies
+ * PKT_TX_TCP_CKSUM)
+ * - set the flag PKT_TX_IPV4 or PKT_TX_IPV6
+ * - if it's IPv4, set the PKT_TX_IP_CKSUM flag and write the IP checksum
+ * to 0 in the packet
+ * - fill the mbuf offload information: l2_len, l3_len, l4_len, tso_segsz
+ * - calculate the pseudo header checksum without taking ip_len in account,
+ * and set it in the TCP header. Refer to rte_ipv4_phdr_cksum() and
+ * rte_ipv6_phdr_cksum() that can be used as helpers.
*/
-#define PKT_TX_OFFLOAD_MASK (PKT_TX_VLAN_PKT | PKT_TX_IP_CKSUM | PKT_TX_L4_MASK)
-
-/** Offload features */
-union rte_vlan_macip {
- uint32_t data;
- struct {
- uint16_t l3_len:9; /**< L3 (IP) Header Length. */
- uint16_t l2_len:7; /**< L2 (MAC) Header Length. */
- uint16_t vlan_tci;
- /**< VLAN Tag Control Identifier (CPU order). */
- } f;
-};
+#define PKT_TX_TCP_SEG (1ULL << 50)
-/*
- * Compare mask for vlan_macip_len.data,
- * should be in sync with rte_vlan_macip.f layout.
- * */
-#define TX_VLAN_CMP_MASK 0xFFFF0000 /**< VLAN length - 16-bits. */
-#define TX_MAC_LEN_CMP_MASK 0x0000FE00 /**< MAC length - 7-bits. */
-#define TX_IP_LEN_CMP_MASK 0x000001FF /**< IP length - 9-bits. */
-/**< MAC+IP length. */
-#define TX_MACIP_LEN_CMP_MASK (TX_MAC_LEN_CMP_MASK | TX_IP_LEN_CMP_MASK)
+#define PKT_TX_IEEE1588_TMST (1ULL << 51) /**< TX IEEE1588 packet to timestamp. */
/**
- * A packet message buffer.
+ * Bits 52+53 used for L4 packet type with checksum enabled: 00: Reserved,
+ * 01: TCP checksum, 10: SCTP checksum, 11: UDP checksum. To use hardware
+ * L4 checksum offload, the user needs to:
+ * - fill l2_len and l3_len in mbuf
+ * - set the flags PKT_TX_TCP_CKSUM, PKT_TX_SCTP_CKSUM or PKT_TX_UDP_CKSUM
+ * - set the flag PKT_TX_IPV4 or PKT_TX_IPV6
+ * - calculate the pseudo header checksum and set it in the L4 header (only
+ * for TCP or UDP). See rte_ipv4_phdr_cksum() and rte_ipv6_phdr_cksum().
+ * For SCTP, set the crc field to 0.
*/
-struct rte_pktmbuf {
- /* valid for any segment */
- struct rte_mbuf *next; /**< Next segment of scattered packet. */
- void* data; /**< Start address of data in segment buffer. */
- uint16_t data_len; /**< Amount of data in segment buffer. */
-
- /* these fields are valid for first segment only */
- uint8_t nb_segs; /**< Number of segments. */
- uint8_t in_port; /**< Input port. */
- uint32_t pkt_len; /**< Total pkt len: sum of all segment data_len. */
-
- /* offload features */
- union rte_vlan_macip vlan_macip;
- union {
- uint32_t rss; /**< RSS hash result if RSS enabled */
- struct {
- uint16_t hash;
- uint16_t id;
- } fdir; /**< Filter identifier if FDIR enabled */
- uint32_t sched; /**< Hierarchical scheduler */
- } hash; /**< hash information */
-};
+#define PKT_TX_L4_NO_CKSUM (0ULL << 52) /**< Disable L4 cksum of TX pkt. */
+#define PKT_TX_TCP_CKSUM (1ULL << 52) /**< TCP cksum of TX pkt. computed by NIC. */
+#define PKT_TX_SCTP_CKSUM (2ULL << 52) /**< SCTP cksum of TX pkt. computed by NIC. */
+#define PKT_TX_UDP_CKSUM (3ULL << 52) /**< UDP cksum of TX pkt. computed by NIC. */
+#define PKT_TX_L4_MASK (3ULL << 52) /**< Mask for L4 cksum offload request. */
/**
- * This enum indicates the mbuf type.
+ * Offload the IP checksum in the hardware. The flag PKT_TX_IPV4 should
+ * also be set by the application, although a PMD will only check
+ * PKT_TX_IP_CKSUM.
+ * - set the IP checksum field in the packet to 0
+ * - fill the mbuf offload information: l2_len, l3_len
*/
-enum rte_mbuf_type {
- RTE_MBUF_CTRL, /**< Control mbuf. */
- RTE_MBUF_PKT, /**< Packet mbuf. */
-};
+#define PKT_TX_IP_CKSUM (1ULL << 54)
+
+/**
+ * Packet is IPv4. This flag must be set when using any offload feature
+ * (TSO, L3 or L4 checksum) to tell the NIC that the packet is an IPv4
+ * packet. If the packet is a tunneled packet, this flag is related to
+ * the inner headers.
+ */
+#define PKT_TX_IPV4 (1ULL << 55)
/**
- * The generic rte_mbuf, containing a packet mbuf or a control mbuf.
+ * Packet is IPv6. This flag must be set when using an offload feature
+ * (TSO or L4 checksum) to tell the NIC that the packet is an IPv6
+ * packet. If the packet is a tunneled packet, this flag is related to
+ * the inner headers.
+ */
+#define PKT_TX_IPV6 (1ULL << 56)
+
+#define PKT_TX_VLAN_PKT (1ULL << 57) /**< TX packet is a 802.1q VLAN packet. */
+
+/**
+ * Offload the IP checksum of an external header in the hardware. The
+ * flag PKT_TX_OUTER_IPV4 should also be set by the application, alto ugh
+ * a PMD will only check PKT_TX_IP_CKSUM. The IP checksum field in the
+ * packet must be set to 0.
+ * - set the outer IP checksum field in the packet to 0
+ * - fill the mbuf offload information: outer_l2_len, outer_l3_len
+ */
+#define PKT_TX_OUTER_IP_CKSUM (1ULL << 58)
+
+/**
+ * Packet outer header is IPv4. This flag must be set when using any
+ * outer offload feature (L3 or L4 checksum) to tell the NIC that the
+ * outer header of the tunneled packet is an IPv4 packet.
+ */
+#define PKT_TX_OUTER_IPV4 (1ULL << 59)
+
+/**
+ * Packet outer header is IPv6. This flag must be set when using any
+ * outer offload feature (L4 checksum) to tell the NIC that the outer
+ * header of the tunneled packet is an IPv6 packet.
+ */
+#define PKT_TX_OUTER_IPV6 (1ULL << 60)
+
+#define IND_ATTACHED_MBUF (1ULL << 62) /**< Indirect attached mbuf */
+
+/* Use final bit of flags to indicate a control mbuf */
+#define CTRL_MBUF_FLAG (1ULL << 63) /**< Mbuf contains control data */
+
+/**
+ * Get the name of a RX offload flag
+ *
+ * @param mask
+ * The mask describing the flag.
+ * @return
+ * The name of this flag, or NULL if it's not a valid RX flag.
+ */
+const char *rte_get_rx_ol_flag_name(uint64_t mask);
+
+/**
+ * Get the name of a TX offload flag
+ *
+ * @param mask
+ * The mask describing the flag. Usually only one bit must be set.
+ * Several bits can be given if they belong to the same mask.
+ * Ex: PKT_TX_L4_MASK.
+ * @return
+ * The name of this flag, or NULL if it's not a valid TX flag.
+ */
+const char *rte_get_tx_ol_flag_name(uint64_t mask);
+
+/**
+ * Some NICs need at least 2KB buffer to RX standard Ethernet frame without
+ * splitting it into multiple segments.
+ * So, for mbufs that planned to be involved into RX/TX, the recommended
+ * minimal buffer length is 2KB + RTE_PKTMBUF_HEADROOM.
+ */
+#define RTE_MBUF_DEFAULT_DATAROOM 2048
+#define RTE_MBUF_DEFAULT_BUF_SIZE \
+ (RTE_MBUF_DEFAULT_DATAROOM + RTE_PKTMBUF_HEADROOM)
+
+/* define a set of marker types that can be used to refer to set points in the
+ * mbuf */
+typedef void *MARKER[0]; /**< generic marker for a point in a structure */
+typedef uint8_t MARKER8[0]; /**< generic marker with 1B alignment */
+typedef uint64_t MARKER64[0]; /**< marker that allows us to overwrite 8 bytes
+ * with a single assignment */
+
+/**
+ * The generic rte_mbuf, containing a packet mbuf.
*/
struct rte_mbuf {
- struct rte_mempool *pool; /**< Pool from which mbuf was allocated. */
+ MARKER cacheline0;
+
void *buf_addr; /**< Virtual address of segment buffer. */
phys_addr_t buf_physaddr; /**< Physical address of segment buffer. */
+
uint16_t buf_len; /**< Length of segment buffer. */
-#ifdef RTE_MBUF_SCATTER_GATHER
+
+ /* next 6 bytes are initialised on RX descriptor rearm */
+ MARKER8 rearm_data;
+ uint16_t data_off;
+
/**
* 16-bit Reference counter.
* It should only be accessed using the following functions:
* config option.
*/
union {
- rte_atomic16_t refcnt_atomic; /**< Atomically accessed refcnt */
- uint16_t refcnt; /**< Non-atomically accessed refcnt */
+ rte_atomic16_t refcnt_atomic; /**< Atomically accessed refcnt */
+ uint16_t refcnt; /**< Non-atomically accessed refcnt */
};
-#else
- uint16_t refcnt_reserved; /**< Do not use this field */
-#endif
- uint8_t type; /**< Type of mbuf. */
- uint8_t reserved; /**< Unused field. Required for padding. */
- uint16_t ol_flags; /**< Offload features. */
+ uint8_t nb_segs; /**< Number of segments. */
+ uint8_t port; /**< Input port. */
+
+ uint64_t ol_flags; /**< Offload features. */
+
+ /* remaining bytes are set on RX when pulling packet from descriptor */
+ MARKER rx_descriptor_fields1;
+
+ /**
+ * The packet type, which is used to indicate ordinary packet and also
+ * tunneled packet format, i.e. each number is represented a type of
+ * packet.
+ */
+ uint16_t packet_type;
+
+ uint16_t data_len; /**< Amount of data in segment buffer. */
+ uint32_t pkt_len; /**< Total pkt len: sum of all segments. */
+ uint16_t vlan_tci; /**< VLAN Tag Control Identifier (CPU order) */
+ uint16_t vlan_tci_outer; /**< Outer VLAN Tag Control Identifier (CPU order) */
+ union {
+ uint32_t rss; /**< RSS hash result if RSS enabled */
+ struct {
+ union {
+ struct {
+ uint16_t hash;
+ uint16_t id;
+ };
+ uint32_t lo;
+ /**< Second 4 flexible bytes */
+ };
+ uint32_t hi;
+ /**< First 4 flexible bytes or FD ID, dependent on
+ PKT_RX_FDIR_* flag in ol_flags. */
+ } fdir; /**< Filter identifier if FDIR enabled */
+ uint32_t sched; /**< Hierarchical scheduler */
+ uint32_t usr; /**< User defined tags. See rte_distributor_process() */
+ } hash; /**< hash information */
+
+ uint32_t seqn; /**< Sequence number. See also rte_reorder_insert() */
+
+ /* second cache line - fields only used in slow path or on TX */
+ MARKER cacheline1 __rte_cache_aligned;
+
+ union {
+ void *userdata; /**< Can be used for external metadata */
+ uint64_t udata64; /**< Allow 8-byte userdata on 32-bit */
+ };
+
+ struct rte_mempool *pool; /**< Pool from which mbuf was allocated. */
+ struct rte_mbuf *next; /**< Next segment of scattered packet. */
+ /* fields to support TX offloads */
union {
- struct rte_ctrlmbuf ctrl;
- struct rte_pktmbuf pkt;
+ uint64_t tx_offload; /**< combined for easy fetch */
+ struct {
+ uint64_t l2_len:7; /**< L2 (MAC) Header Length. */
+ uint64_t l3_len:9; /**< L3 (IP) Header Length. */
+ uint64_t l4_len:8; /**< L4 (TCP/UDP) Header Length. */
+ uint64_t tso_segsz:16; /**< TCP TSO segment size */
+
+ /* fields for TX offloading of tunnels */
+ uint64_t outer_l3_len:9; /**< Outer L3 (IP) Hdr Length. */
+ uint64_t outer_l2_len:7; /**< Outer L2 (MAC) Hdr Length. */
+
+ /* uint64_t unused:8; */
+ };
};
+
+ /** Size of the application private data. In case of an indirect
+ * mbuf, it stores the direct mbuf private data size. */
+ uint16_t priv_size;
} __rte_cache_aligned;
+static inline uint16_t rte_pktmbuf_priv_size(struct rte_mempool *mp);
+
/**
- * Given the buf_addr returns the pointer to corresponding mbuf.
+ * Return the mbuf owning the data buffer address of an indirect mbuf.
+ *
+ * @param mi
+ * The pointer to the indirect mbuf.
+ * @return
+ * The address of the direct mbuf corresponding to buffer_addr.
*/
-#define RTE_MBUF_FROM_BADDR(ba) (((struct rte_mbuf *)(ba)) - 1)
+static inline struct rte_mbuf *
+rte_mbuf_from_indirect(struct rte_mbuf *mi)
+{
+ return RTE_PTR_SUB(mi->buf_addr, sizeof(*mi) + mi->priv_size);
+}
/**
- * Given the pointer to mbuf returns an address where it's buf_addr
- * should point to.
+ * Return the buffer address embedded in the given mbuf.
+ *
+ * @param md
+ * The pointer to the mbuf.
+ * @return
+ * The address of the data buffer owned by the mbuf.
*/
-#define RTE_MBUF_TO_BADDR(mb) (((struct rte_mbuf *)(mb)) + 1)
+static inline char *
+rte_mbuf_to_baddr(struct rte_mbuf *md)
+{
+ char *buffer_addr;
+ buffer_addr = (char *)md + sizeof(*md) + rte_pktmbuf_priv_size(md->pool);
+ return buffer_addr;
+}
/**
* Returns TRUE if given mbuf is indirect, or FALSE otherwise.
*/
-#define RTE_MBUF_INDIRECT(mb) (RTE_MBUF_FROM_BADDR((mb)->buf_addr) != (mb))
+#define RTE_MBUF_INDIRECT(mb) ((mb)->ol_flags & IND_ATTACHED_MBUF)
/**
* Returns TRUE if given mbuf is direct, or FALSE otherwise.
*/
-#define RTE_MBUF_DIRECT(mb) (RTE_MBUF_FROM_BADDR((mb)->buf_addr) == (mb))
-
+#define RTE_MBUF_DIRECT(mb) (!RTE_MBUF_INDIRECT(mb))
/**
* Private data in case of pktmbuf pool.
* appended after the mempool structure (in private data).
*/
struct rte_pktmbuf_pool_private {
- uint16_t mbuf_data_room_size; /**< Size of data space in each mbuf.*/
+ uint16_t mbuf_data_room_size; /**< Size of data space in each mbuf. */
+ uint16_t mbuf_priv_size; /**< Size of private area in each mbuf. */
};
#ifdef RTE_LIBRTE_MBUF_DEBUG
/** check mbuf type in debug mode */
-#define __rte_mbuf_sanity_check(m, t, is_h) rte_mbuf_sanity_check(m, t, is_h)
+#define __rte_mbuf_sanity_check(m, is_h) rte_mbuf_sanity_check(m, is_h)
/** check mbuf type in debug mode if mbuf pointer is not null */
-#define __rte_mbuf_sanity_check_raw(m, t, is_h) do { \
+#define __rte_mbuf_sanity_check_raw(m, is_h) do { \
if ((m) != NULL) \
- rte_mbuf_sanity_check(m, t, is_h); \
+ rte_mbuf_sanity_check(m, is_h); \
} while (0)
/** MBUF asserts in debug mode */
#else /* RTE_LIBRTE_MBUF_DEBUG */
/** check mbuf type in debug mode */
-#define __rte_mbuf_sanity_check(m, t, is_h) do { } while(0)
+#define __rte_mbuf_sanity_check(m, is_h) do { } while (0)
/** check mbuf type in debug mode if mbuf pointer is not null */
-#define __rte_mbuf_sanity_check_raw(m, t, is_h) do { } while(0)
+#define __rte_mbuf_sanity_check_raw(m, is_h) do { } while (0)
/** MBUF asserts in debug mode */
-#define RTE_MBUF_ASSERT(exp) do { } while(0)
+#define RTE_MBUF_ASSERT(exp) do { } while (0)
#endif /* RTE_LIBRTE_MBUF_DEBUG */
-#ifdef RTE_MBUF_SCATTER_GATHER
#ifdef RTE_MBUF_REFCNT_ATOMIC
-/**
- * Adds given value to an mbuf's refcnt and returns its new value.
- * @param m
- * Mbuf to update
- * @param value
- * Value to add/subtract
- * @return
- * Updated value
- */
-static inline uint16_t
-rte_mbuf_refcnt_update(struct rte_mbuf *m, int16_t value)
-{
- return (uint16_t)(rte_atomic16_add_return(&m->refcnt_atomic, value));
-}
-
/**
* Reads the value of an mbuf's refcnt.
* @param m
rte_atomic16_set(&m->refcnt_atomic, new_value);
}
+/**
+ * Adds given value to an mbuf's refcnt and returns its new value.
+ * @param m
+ * Mbuf to update
+ * @param value
+ * Value to add/subtract
+ * @return
+ * Updated value
+ */
+static inline uint16_t
+rte_mbuf_refcnt_update(struct rte_mbuf *m, int16_t value)
+{
+ /*
+ * The atomic_add is an expensive operation, so we don't want to
+ * call it in the case where we know we are the uniq holder of
+ * this mbuf (i.e. ref_cnt == 1). Otherwise, an atomic
+ * operation has to be used because concurrent accesses on the
+ * reference counter can occur.
+ */
+ if (likely(rte_mbuf_refcnt_read(m) == 1)) {
+ rte_mbuf_refcnt_set(m, 1 + value);
+ return 1 + value;
+ }
+
+ return (uint16_t)(rte_atomic16_add_return(&m->refcnt_atomic, value));
+}
+
#else /* ! RTE_MBUF_REFCNT_ATOMIC */
/**
rte_prefetch0(m); \
} while (0)
-#else /* ! RTE_MBUF_SCATTER_GATHER */
-
-/** Mbuf prefetch */
-#define RTE_MBUF_PREFETCH_TO_FREE(m) do { } while(0)
-
-#define rte_mbuf_refcnt_set(m,v) do { } while(0)
-
-#endif /* RTE_MBUF_SCATTER_GATHER */
-
/**
* Sanity checks on an mbuf.
*
* @param m
* The mbuf to be checked.
- * @param t
- * The expected type of the mbuf.
* @param is_header
* True if the mbuf is a packet header, false if it is a sub-segment
* of a packet (in this case, some fields like nb_segs are not checked)
*/
void
-rte_mbuf_sanity_check(const struct rte_mbuf *m, enum rte_mbuf_type t,
- int is_header);
+rte_mbuf_sanity_check(const struct rte_mbuf *m, int is_header);
/**
* @internal Allocate a new mbuf from mempool *mp*.
* The use of that function is reserved for RTE internal needs.
- * Please use either rte_ctrlmbuf_alloc() or rte_pktmbuf_alloc().
+ * Please use rte_pktmbuf_alloc().
*
* @param mp
* The mempool from which mbuf is allocated.
if (rte_mempool_get(mp, &mb) < 0)
return NULL;
m = (struct rte_mbuf *)mb;
-#ifdef RTE_MBUF_SCATTER_GATHER
RTE_MBUF_ASSERT(rte_mbuf_refcnt_read(m) == 0);
rte_mbuf_refcnt_set(m, 1);
-#endif /* RTE_MBUF_SCATTER_GATHER */
- return (m);
+ return m;
}
/**
* @internal Put mbuf back into its original mempool.
* The use of that function is reserved for RTE internal needs.
- * Please use either rte_ctrlmbuf_free() or rte_pktmbuf_free().
+ * Please use rte_pktmbuf_free().
*
* @param m
* The mbuf to be freed.
static inline void __attribute__((always_inline))
__rte_mbuf_raw_free(struct rte_mbuf *m)
{
-#ifdef RTE_MBUF_SCATTER_GATHER
RTE_MBUF_ASSERT(rte_mbuf_refcnt_read(m) == 0);
-#endif /* RTE_MBUF_SCATTER_GATHER */
rte_mempool_put(m->pool, m);
}
* The index of the mbuf in the pool table.
*/
void rte_ctrlmbuf_init(struct rte_mempool *mp, void *opaque_arg,
- void *m, unsigned i);
+ void *m, unsigned i);
/**
* Allocate a new mbuf (type is ctrl) from mempool *mp*.
* - The pointer to the new mbuf on success.
* - NULL if allocation failed.
*/
-static inline struct rte_mbuf *rte_ctrlmbuf_alloc(struct rte_mempool *mp)
-{
- struct rte_mbuf *m;
- if ((m = __rte_mbuf_raw_alloc(mp)) != NULL) {
- m->ctrl.data = m->buf_addr;
- m->ctrl.data_len = 0;
- __rte_mbuf_sanity_check(m, RTE_MBUF_CTRL, 0);
- }
- return (m);
-}
+#define rte_ctrlmbuf_alloc(mp) rte_pktmbuf_alloc(mp)
/**
* Free a control mbuf back into its original mempool.
* @param m
* The control mbuf to be freed.
*/
-static inline void rte_ctrlmbuf_free(struct rte_mbuf *m)
-{
- __rte_mbuf_sanity_check(m, RTE_MBUF_CTRL, 0);
-#ifdef RTE_MBUF_SCATTER_GATHER
- if (rte_mbuf_refcnt_update(m, -1) == 0)
-#endif /* RTE_MBUF_SCATTER_GATHER */
- __rte_mbuf_raw_free(m);
-}
+#define rte_ctrlmbuf_free(m) rte_pktmbuf_free(m)
/**
* A macro that returns the pointer to the carried data.
* @param m
* The control mbuf.
*/
-#define rte_ctrlmbuf_data(m) ((m)->ctrl.data)
+#define rte_ctrlmbuf_data(m) ((char *)((m)->buf_addr) + (m)->data_off)
/**
* A macro that returns the length of the carried data.
* @param m
* The control mbuf.
*/
-#define rte_ctrlmbuf_len(m) ((m)->ctrl.data_len)
+#define rte_ctrlmbuf_len(m) rte_pktmbuf_data_len(m)
+
+/**
+ * Tests if an mbuf is a control mbuf
+ *
+ * @param m
+ * The mbuf to be tested
+ * @return
+ * - True (1) if the mbuf is a control mbuf
+ * - False(0) otherwise
+ */
+static inline int
+rte_is_ctrlmbuf(struct rte_mbuf *m)
+{
+ return !!(m->ol_flags & CTRL_MBUF_FLAG);
+}
/* Operations on pkt mbuf */
/**
* The packet mbuf constructor.
*
- * This function initializes some fields in the mbuf structure that are not
- * modified by the user once created (mbuf type, origin pool, buffer start
+ * This function initializes some fields in the mbuf structure that are
+ * not modified by the user once created (origin pool, buffer start
* address, and so on). This function is given as a callback function to
* rte_mempool_create() at pool creation time.
*
*/
void rte_pktmbuf_pool_init(struct rte_mempool *mp, void *opaque_arg);
+/**
+ * Create a mbuf pool.
+ *
+ * This function creates and initializes a packet mbuf pool. It is
+ * a wrapper to rte_mempool_create() with the proper packet constructor
+ * and mempool constructor.
+ *
+ * @param name
+ * The name of the mbuf pool.
+ * @param n
+ * The number of elements in the mbuf pool. The optimum size (in terms
+ * of memory usage) for a mempool is when n is a power of two minus one:
+ * n = (2^q - 1).
+ * @param cache_size
+ * Size of the per-core object cache. See rte_mempool_create() for
+ * details.
+ * @param priv_size
+ * Size of application private are between the rte_mbuf structure
+ * and the data buffer.
+ * @param data_room_size
+ * Size of data buffer in each mbuf, including RTE_PKTMBUF_HEADROOM.
+ * @param socket_id
+ * The socket identifier where the memory should be allocated. The
+ * value can be *SOCKET_ID_ANY* if there is no NUMA constraint for the
+ * reserved zone.
+ * @return
+ * The pointer to the new allocated mempool, on success. NULL on error
+ * with rte_errno set appropriately. Possible rte_errno values include:
+ * - E_RTE_NO_CONFIG - function could not get pointer to rte_config structure
+ * - E_RTE_SECONDARY - function was called from a secondary process instance
+ * - EINVAL - cache size provided is too large
+ * - ENOSPC - the maximum number of memzones has already been allocated
+ * - EEXIST - a memzone with the same name already exists
+ * - ENOMEM - no appropriate memory area found in which to create memzone
+ */
+struct rte_mempool *
+rte_pktmbuf_pool_create(const char *name, unsigned n,
+ unsigned cache_size, uint16_t priv_size, uint16_t data_room_size,
+ int socket_id);
+
+/**
+ * Get the data room size of mbufs stored in a pktmbuf_pool
+ *
+ * The data room size is the amount of data that can be stored in a
+ * mbuf including the headroom (RTE_PKTMBUF_HEADROOM).
+ *
+ * @param mp
+ * The packet mbuf pool.
+ * @return
+ * The data room size of mbufs stored in this mempool.
+ */
+static inline uint16_t
+rte_pktmbuf_data_room_size(struct rte_mempool *mp)
+{
+ struct rte_pktmbuf_pool_private *mbp_priv;
+
+ mbp_priv = (struct rte_pktmbuf_pool_private *)rte_mempool_get_priv(mp);
+ return mbp_priv->mbuf_data_room_size;
+}
+
+/**
+ * Get the application private size of mbufs stored in a pktmbuf_pool
+ *
+ * The private size of mbuf is a zone located between the rte_mbuf
+ * structure and the data buffer where an application can store data
+ * associated to a packet.
+ *
+ * @param mp
+ * The packet mbuf pool.
+ * @return
+ * The private size of mbufs stored in this mempool.
+ */
+static inline uint16_t
+rte_pktmbuf_priv_size(struct rte_mempool *mp)
+{
+ struct rte_pktmbuf_pool_private *mbp_priv;
+
+ mbp_priv = (struct rte_pktmbuf_pool_private *)rte_mempool_get_priv(mp);
+ return mbp_priv->mbuf_priv_size;
+}
+
/**
* Reset the fields of a packet mbuf to their default values.
*
*/
static inline void rte_pktmbuf_reset(struct rte_mbuf *m)
{
- uint32_t buf_ofs;
-
- m->pkt.next = NULL;
- m->pkt.pkt_len = 0;
- m->pkt.vlan_macip.data = 0;
- m->pkt.nb_segs = 1;
- m->pkt.in_port = 0xff;
+ m->next = NULL;
+ m->pkt_len = 0;
+ m->tx_offload = 0;
+ m->vlan_tci = 0;
+ m->vlan_tci_outer = 0;
+ m->nb_segs = 1;
+ m->port = 0xff;
m->ol_flags = 0;
- buf_ofs = (RTE_PKTMBUF_HEADROOM <= m->buf_len) ?
+ m->packet_type = 0;
+ m->data_off = (RTE_PKTMBUF_HEADROOM <= m->buf_len) ?
RTE_PKTMBUF_HEADROOM : m->buf_len;
- m->pkt.data = (char*) m->buf_addr + buf_ofs;
- m->pkt.data_len = 0;
- __rte_mbuf_sanity_check(m, RTE_MBUF_PKT, 1);
+ m->data_len = 0;
+ __rte_mbuf_sanity_check(m, 1);
}
/**
- * Allocate a new mbuf (type is pkt) from a mempool.
+ * Allocate a new mbuf from a mempool.
*
* This new mbuf contains one segment, which has a length of 0. The pointer
* to data is initialized to have some bytes of headroom in the buffer
struct rte_mbuf *m;
if ((m = __rte_mbuf_raw_alloc(mp)) != NULL)
rte_pktmbuf_reset(m);
- return (m);
+ return m;
}
-#ifdef RTE_MBUF_SCATTER_GATHER
-
/**
* Attach packet mbuf to another packet mbuf.
+ *
* After attachment we refer the mbuf we attached as 'indirect',
* while mbuf we attached to as 'direct'.
* Right now, not supported:
- * - attachment to indirect mbuf (e.g. - md has to be direct).
* - attachment for already indirect mbuf (e.g. - mi has to be direct).
* - mbuf we trying to attach (mi) is used by someone else
* e.g. it's reference counter is greater then 1.
*
* @param mi
* The indirect packet mbuf.
- * @param md
- * The direct packet mbuf.
+ * @param m
+ * The packet mbuf we're attaching to.
*/
-
-static inline void rte_pktmbuf_attach(struct rte_mbuf *mi, struct rte_mbuf *md)
+static inline void rte_pktmbuf_attach(struct rte_mbuf *mi, struct rte_mbuf *m)
{
- RTE_MBUF_ASSERT(RTE_MBUF_DIRECT(md) &&
- RTE_MBUF_DIRECT(mi) &&
- rte_mbuf_refcnt_read(mi) == 1);
+ struct rte_mbuf *md;
- rte_mbuf_refcnt_update(md, 1);
- mi->buf_physaddr = md->buf_physaddr;
- mi->buf_addr = md->buf_addr;
- mi->buf_len = md->buf_len;
-
- mi->pkt = md->pkt;
+ RTE_MBUF_ASSERT(RTE_MBUF_DIRECT(mi) &&
+ rte_mbuf_refcnt_read(mi) == 1);
- mi->pkt.next = NULL;
- mi->pkt.pkt_len = mi->pkt.data_len;
- mi->pkt.nb_segs = 1;
+ /* if m is not direct, get the mbuf that embeds the data */
+ if (RTE_MBUF_DIRECT(m))
+ md = m;
+ else
+ md = rte_mbuf_from_indirect(m);
- __rte_mbuf_sanity_check(mi, RTE_MBUF_PKT, 1);
- __rte_mbuf_sanity_check(md, RTE_MBUF_PKT, 0);
+ rte_mbuf_refcnt_update(md, 1);
+ mi->priv_size = m->priv_size;
+ mi->buf_physaddr = m->buf_physaddr;
+ mi->buf_addr = m->buf_addr;
+ mi->buf_len = m->buf_len;
+
+ mi->next = m->next;
+ mi->data_off = m->data_off;
+ mi->data_len = m->data_len;
+ mi->port = m->port;
+ mi->vlan_tci = m->vlan_tci;
+ mi->vlan_tci_outer = m->vlan_tci_outer;
+ mi->tx_offload = m->tx_offload;
+ mi->hash = m->hash;
+
+ mi->next = NULL;
+ mi->pkt_len = mi->data_len;
+ mi->nb_segs = 1;
+ mi->ol_flags = m->ol_flags | IND_ATTACHED_MBUF;
+ mi->packet_type = m->packet_type;
+
+ __rte_mbuf_sanity_check(mi, 1);
+ __rte_mbuf_sanity_check(m, 0);
}
/**
- * Detach an indirect packet mbuf -
+ * Detach an indirect packet mbuf.
+ *
* - restore original mbuf address and length values.
* - reset pktmbuf data and data_len to their default values.
* All other fields of the given packet mbuf will be left intact.
* @param m
* The indirect attached packet mbuf.
*/
-
static inline void rte_pktmbuf_detach(struct rte_mbuf *m)
{
- const struct rte_mempool *mp = m->pool;
- void *buf = RTE_MBUF_TO_BADDR(m);
- uint32_t buf_ofs;
- uint32_t buf_len = mp->elt_size - sizeof(*m);
- m->buf_physaddr = rte_mempool_virt2phy(mp, m) + sizeof (*m);
+ struct rte_mempool *mp = m->pool;
+ uint32_t mbuf_size, buf_len, priv_size;
+
+ priv_size = rte_pktmbuf_priv_size(mp);
+ mbuf_size = sizeof(struct rte_mbuf) + priv_size;
+ buf_len = rte_pktmbuf_data_room_size(mp);
- m->buf_addr = buf;
+ m->priv_size = priv_size;
+ m->buf_addr = (char *)m + mbuf_size;
+ m->buf_physaddr = rte_mempool_virt2phy(mp, m) + mbuf_size;
m->buf_len = (uint16_t)buf_len;
+ m->data_off = RTE_MIN(RTE_PKTMBUF_HEADROOM, (uint16_t)m->buf_len);
+ m->data_len = 0;
+ m->ol_flags = 0;
+}
- buf_ofs = (RTE_PKTMBUF_HEADROOM <= m->buf_len) ?
- RTE_PKTMBUF_HEADROOM : m->buf_len;
- m->pkt.data = (char*) m->buf_addr + buf_ofs;
+static inline struct rte_mbuf* __attribute__((always_inline))
+__rte_pktmbuf_prefree_seg(struct rte_mbuf *m)
+{
+ __rte_mbuf_sanity_check(m, 0);
- m->pkt.data_len = 0;
-}
+ if (likely(rte_mbuf_refcnt_update(m, -1) == 0)) {
-#endif /* RTE_MBUF_SCATTER_GATHER */
+ /* if this is an indirect mbuf, then
+ * - detach mbuf
+ * - free attached mbuf segment
+ */
+ if (RTE_MBUF_INDIRECT(m)) {
+ struct rte_mbuf *md = rte_mbuf_from_indirect(m);
+ rte_pktmbuf_detach(m);
+ if (rte_mbuf_refcnt_update(md, -1) == 0)
+ __rte_mbuf_raw_free(md);
+ }
+ return m;
+ }
+ return NULL;
+}
/**
* Free a segment of a packet mbuf into its original mempool.
static inline void __attribute__((always_inline))
rte_pktmbuf_free_seg(struct rte_mbuf *m)
{
- __rte_mbuf_sanity_check(m, RTE_MBUF_PKT, 0);
-
-#ifdef RTE_MBUF_SCATTER_GATHER
- if (likely (rte_mbuf_refcnt_read(m) == 1) ||
- likely (rte_mbuf_refcnt_update(m, -1) == 0)) {
- struct rte_mbuf *md = RTE_MBUF_FROM_BADDR(m->buf_addr);
-
- rte_mbuf_refcnt_set(m, 0);
-
- /* if this is an indirect mbuf, then
- * - detach mbuf
- * - free attached mbuf segment
- */
- if (unlikely (md != m)) {
- rte_pktmbuf_detach(m);
- if (rte_mbuf_refcnt_update(md, -1) == 0)
- __rte_mbuf_raw_free(md);
- }
-#endif
+ if (likely(NULL != (m = __rte_pktmbuf_prefree_seg(m)))) {
+ m->next = NULL;
__rte_mbuf_raw_free(m);
-#ifdef RTE_MBUF_SCATTER_GATHER
}
-#endif
}
/**
{
struct rte_mbuf *m_next;
- __rte_mbuf_sanity_check(m, RTE_MBUF_PKT, 1);
+ __rte_mbuf_sanity_check(m, 1);
while (m != NULL) {
- m_next = m->pkt.next;
+ m_next = m->next;
rte_pktmbuf_free_seg(m);
m = m_next;
}
}
-#ifdef RTE_MBUF_SCATTER_GATHER
-
/**
* Creates a "clone" of the given packet mbuf.
*
uint8_t nseg;
if (unlikely ((mc = rte_pktmbuf_alloc(mp)) == NULL))
- return (NULL);
+ return NULL;
mi = mc;
- prev = &mi->pkt.next;
- pktlen = md->pkt.pkt_len;
+ prev = &mi->next;
+ pktlen = md->pkt_len;
nseg = 0;
do {
nseg++;
rte_pktmbuf_attach(mi, md);
*prev = mi;
- prev = &mi->pkt.next;
- } while ((md = md->pkt.next) != NULL &&
+ prev = &mi->next;
+ } while ((md = md->next) != NULL &&
(mi = rte_pktmbuf_alloc(mp)) != NULL);
*prev = NULL;
- mc->pkt.nb_segs = nseg;
- mc->pkt.pkt_len = pktlen;
+ mc->nb_segs = nseg;
+ mc->pkt_len = pktlen;
/* Allocation of new indirect segment failed */
if (unlikely (mi == NULL)) {
rte_pktmbuf_free(mc);
- return (NULL);
+ return NULL;
}
- __rte_mbuf_sanity_check(mc, RTE_MBUF_PKT, 1);
- return (mc);
+ __rte_mbuf_sanity_check(mc, 1);
+ return mc;
}
/**
*/
static inline void rte_pktmbuf_refcnt_update(struct rte_mbuf *m, int16_t v)
{
- __rte_mbuf_sanity_check(m, RTE_MBUF_PKT, 1);
+ __rte_mbuf_sanity_check(m, 1);
do {
rte_mbuf_refcnt_update(m, v);
- } while ((m = m->pkt.next) != NULL);
+ } while ((m = m->next) != NULL);
}
-#endif /* RTE_MBUF_SCATTER_GATHER */
-
/**
* Get the headroom in a packet mbuf.
*
*/
static inline uint16_t rte_pktmbuf_headroom(const struct rte_mbuf *m)
{
- __rte_mbuf_sanity_check(m, RTE_MBUF_PKT, 1);
- return (uint16_t) ((char*) m->pkt.data - (char*) m->buf_addr);
+ __rte_mbuf_sanity_check(m, 1);
+ return m->data_off;
}
/**
*/
static inline uint16_t rte_pktmbuf_tailroom(const struct rte_mbuf *m)
{
- __rte_mbuf_sanity_check(m, RTE_MBUF_PKT, 1);
+ __rte_mbuf_sanity_check(m, 1);
return (uint16_t)(m->buf_len - rte_pktmbuf_headroom(m) -
- m->pkt.data_len);
+ m->data_len);
}
/**
{
struct rte_mbuf *m2 = (struct rte_mbuf *)m;
- __rte_mbuf_sanity_check(m, RTE_MBUF_PKT, 1);
- while (m2->pkt.next != NULL)
- m2 = m2->pkt.next;
+ __rte_mbuf_sanity_check(m, 1);
+ while (m2->next != NULL)
+ m2 = m2->next;
return m2;
}
+/**
+ * A macro that points to an offset into the data in the mbuf.
+ *
+ * The returned pointer is cast to type t. Before using this
+ * function, the user must ensure that the first segment is large
+ * enough to accommodate its data.
+ *
+ * @param m
+ * The packet mbuf.
+ * @param o
+ * The offset into the mbuf data.
+ * @param t
+ * The type to cast the result into.
+ */
+#define rte_pktmbuf_mtod_offset(m, t, o) \
+ ((t)((char *)(m)->buf_addr + (m)->data_off + (o)))
+
/**
* A macro that points to the start of the data in the mbuf.
*
* The returned pointer is cast to type t. Before using this
- * function, the user must ensure that m_headlen(m) is large enough to
- * read its data.
+ * function, the user must ensure that the first segment is large
+ * enough to accommodate its data.
*
* @param m
* The packet mbuf.
* @param t
* The type to cast the result into.
*/
-#define rte_pktmbuf_mtod(m, t) ((t)((m)->pkt.data))
+#define rte_pktmbuf_mtod(m, t) rte_pktmbuf_mtod_offset(m, t, 0)
/**
* A macro that returns the length of the packet.
* @param m
* The packet mbuf.
*/
-#define rte_pktmbuf_pkt_len(m) ((m)->pkt.pkt_len)
+#define rte_pktmbuf_pkt_len(m) ((m)->pkt_len)
/**
* A macro that returns the length of the segment.
* @param m
* The packet mbuf.
*/
-#define rte_pktmbuf_data_len(m) ((m)->pkt.data_len)
+#define rte_pktmbuf_data_len(m) ((m)->data_len)
/**
* Prepend len bytes to an mbuf data area.
static inline char *rte_pktmbuf_prepend(struct rte_mbuf *m,
uint16_t len)
{
- __rte_mbuf_sanity_check(m, RTE_MBUF_PKT, 1);
+ __rte_mbuf_sanity_check(m, 1);
if (unlikely(len > rte_pktmbuf_headroom(m)))
return NULL;
- m->pkt.data = (char*) m->pkt.data - len;
- m->pkt.data_len = (uint16_t)(m->pkt.data_len + len);
- m->pkt.pkt_len = (m->pkt.pkt_len + len);
+ m->data_off -= len;
+ m->data_len = (uint16_t)(m->data_len + len);
+ m->pkt_len = (m->pkt_len + len);
- return (char*) m->pkt.data;
+ return (char *)m->buf_addr + m->data_off;
}
/**
void *tail;
struct rte_mbuf *m_last;
- __rte_mbuf_sanity_check(m, RTE_MBUF_PKT, 1);
+ __rte_mbuf_sanity_check(m, 1);
m_last = rte_pktmbuf_lastseg(m);
if (unlikely(len > rte_pktmbuf_tailroom(m_last)))
return NULL;
- tail = (char*) m_last->pkt.data + m_last->pkt.data_len;
- m_last->pkt.data_len = (uint16_t)(m_last->pkt.data_len + len);
- m->pkt.pkt_len = (m->pkt.pkt_len + len);
+ tail = (char *)m_last->buf_addr + m_last->data_off + m_last->data_len;
+ m_last->data_len = (uint16_t)(m_last->data_len + len);
+ m->pkt_len = (m->pkt_len + len);
return (char*) tail;
}
*/
static inline char *rte_pktmbuf_adj(struct rte_mbuf *m, uint16_t len)
{
- __rte_mbuf_sanity_check(m, RTE_MBUF_PKT, 1);
+ __rte_mbuf_sanity_check(m, 1);
- if (unlikely(len > m->pkt.data_len))
+ if (unlikely(len > m->data_len))
return NULL;
- m->pkt.data_len = (uint16_t)(m->pkt.data_len - len);
- m->pkt.data = ((char*) m->pkt.data + len);
- m->pkt.pkt_len = (m->pkt.pkt_len - len);
- return (char*) m->pkt.data;
+ m->data_len = (uint16_t)(m->data_len - len);
+ m->data_off += len;
+ m->pkt_len = (m->pkt_len - len);
+ return (char *)m->buf_addr + m->data_off;
}
/**
{
struct rte_mbuf *m_last;
- __rte_mbuf_sanity_check(m, RTE_MBUF_PKT, 1);
+ __rte_mbuf_sanity_check(m, 1);
m_last = rte_pktmbuf_lastseg(m);
- if (unlikely(len > m_last->pkt.data_len))
+ if (unlikely(len > m_last->data_len))
return -1;
- m_last->pkt.data_len = (uint16_t)(m_last->pkt.data_len - len);
- m->pkt.pkt_len = (m->pkt.pkt_len - len);
+ m_last->data_len = (uint16_t)(m_last->data_len - len);
+ m->pkt_len = (m->pkt_len - len);
return 0;
}
*/
static inline int rte_pktmbuf_is_contiguous(const struct rte_mbuf *m)
{
- __rte_mbuf_sanity_check(m, RTE_MBUF_PKT, 1);
- return !!(m->pkt.nb_segs == 1);
+ __rte_mbuf_sanity_check(m, 1);
+ return !!(m->nb_segs == 1);
}
/**
* Dump all fields for the given packet mbuf and all its associated
* segments (in the case of a chained buffer).
*
+ * @param f
+ * A pointer to a file for output
* @param m
* The packet mbuf.
* @param dump_len
* If dump_len != 0, also dump the "dump_len" first data bytes of
* the packet.
*/
-void rte_pktmbuf_dump(const struct rte_mbuf *m, unsigned dump_len);
+void rte_pktmbuf_dump(FILE *f, const struct rte_mbuf *m, unsigned dump_len);
#ifdef __cplusplus
}