*/
/**
- * RX packet is a 802.1q VLAN packet. This flag was set by PMDs when
- * the packet is recognized as a VLAN, but the behavior between PMDs
- * was not the same. This flag is kept for some time to avoid breaking
- * applications and should be replaced by PKT_RX_VLAN_STRIPPED.
+ * The RX packet is a 802.1q VLAN packet, and the tci has been
+ * saved in in mbuf->vlan_tci.
+ * If the flag PKT_RX_VLAN_STRIPPED is also present, the VLAN
+ * header has been stripped from mbuf data, else it is still
+ * present.
*/
-#define PKT_RX_VLAN_PKT (1ULL << 0)
+#define PKT_RX_VLAN (1ULL << 0)
#define PKT_RX_RSS_HASH (1ULL << 1) /**< RX packet with RSS hash result. */
#define PKT_RX_FDIR (1ULL << 2) /**< RX packet with FDIR match indicate. */
* A vlan has been stripped by the hardware and its tci is saved in
* mbuf->vlan_tci. This can only happen if vlan stripping is enabled
* in the RX configuration of the PMD.
+ * When PKT_RX_VLAN_STRIPPED is set, PKT_RX_VLAN must also be set.
*/
#define PKT_RX_VLAN_STRIPPED (1ULL << 6)
* The 2 vlans have been stripped by the hardware and their tci are
* saved in mbuf->vlan_tci (inner) and mbuf->vlan_tci_outer (outer).
* This can only happen if vlan stripping is enabled in the RX
- * configuration of the PMD. If this flag is set, PKT_RX_VLAN_STRIPPED
- * must also be set.
+ * configuration of the PMD. If this flag is set,
+ * When PKT_RX_QINQ_STRIPPED is set, the flags (PKT_RX_VLAN |
+ * PKT_RX_VLAN_STRIPPED | PKT_RX_QINQ) must also be set.
*/
#define PKT_RX_QINQ_STRIPPED (1ULL << 15)
-/**
- * Deprecated.
- * RX packet with double VLAN stripped.
- * This flag is replaced by PKT_RX_QINQ_STRIPPED.
- */
-#define PKT_RX_QINQ_PKT PKT_RX_QINQ_STRIPPED
-
/**
* When packets are coalesced by a hardware or virtual driver, this flag
* can be set in the RX mbuf, meaning that the m->tso_segsz field is
*/
#define PKT_RX_TIMESTAMP (1ULL << 17)
+/**
+ * Indicate that security offload processing was applied on the RX packet.
+ */
+#define PKT_RX_SEC_OFFLOAD (1ULL << 18)
+
+/**
+ * Indicate that security offload processing failed on the RX packet.
+ */
+#define PKT_RX_SEC_OFFLOAD_FAILED (1ULL << 19)
+
+/**
+ * The RX packet is a double VLAN, and the outer tci has been
+ * saved in in mbuf->vlan_tci_outer.
+ * If the flag PKT_RX_QINQ_STRIPPED is also present, both VLANs
+ * headers have been stripped from mbuf data, else they are still
+ * present.
+ */
+#define PKT_RX_QINQ (1ULL << 20)
+
/* add new RX flags here */
/* add new TX flags here */
+/**
+ * Request security offload processing on the TX packet.
+ */
+#define PKT_TX_SEC_OFFLOAD (1ULL << 43)
+
/**
* Offload the MACsec. This flag must be set by the application to enable
* this offload feature for a packet to be transmitted.
PKT_TX_QINQ_PKT | \
PKT_TX_VLAN_PKT | \
PKT_TX_TUNNEL_MASK | \
- PKT_TX_MACSEC)
+ PKT_TX_MACSEC | \
+ PKT_TX_SEC_OFFLOAD)
#define __RESERVED (1ULL << 61) /**< reserved for future mbuf use */
uint32_t l3_type:4; /**< (Outer) L3 type. */
uint32_t l4_type:4; /**< (Outer) L4 type. */
uint32_t tun_type:4; /**< Tunnel type. */
- uint32_t inner_l2_type:4; /**< Inner L2 type. */
- uint32_t inner_l3_type:4; /**< Inner L3 type. */
+ RTE_STD_C11
+ union {
+ uint8_t inner_esp_next_proto;
+ /**< ESP next protocol type, valid if
+ * RTE_PTYPE_TUNNEL_ESP tunnel type is set
+ * on both Tx and Rx.
+ */
+ __extension__
+ struct {
+ uint8_t inner_l2_type:4;
+ /**< Inner L2 type. */
+ uint8_t inner_l3_type:4;
+ /**< Inner L3 type. */
+ };
+ };
uint32_t inner_l4_type:4; /**< Inner L4 type. */
};
};
* @param m
* The packet mbuf to be resetted.
*/
+#define MBUF_INVALID_PORT UINT16_MAX
+
static inline void rte_pktmbuf_reset(struct rte_mbuf *m)
{
m->next = NULL;
m->vlan_tci = 0;
m->vlan_tci_outer = 0;
m->nb_segs = 1;
- m->port = 0xff;
+ m->port = MBUF_INVALID_PORT;
m->ol_flags = 0;
m->packet_type = 0;
* Array size
* @return
* - 0: Success
+ * - -ENOENT: Not enough entries in the mempool; no mbufs are retrieved.
*/
static inline int rte_pktmbuf_alloc_bulk(struct rte_mempool *pool,
struct rte_mbuf **mbufs, unsigned count)