* buffers. The message buffers are stored in a mempool, using the
* RTE mempool library.
*
- * This library provide an API to allocate/free packet mbufs, which are
+ * The preferred way to create a mbuf pool is to use
+ * rte_pktmbuf_pool_create(). However, in some situations, an
+ * application may want to have more control (ex: populate the pool with
+ * specific memory), in this case it is possible to use functions from
+ * rte_mempool. See how rte_pktmbuf_pool_create() is implemented for
+ * details.
+ *
+ * This library provides an API to allocate/free packet mbufs, which are
* used to carry network packets.
*
* To understand the concepts of packet buffers or mbufs, you
*/
#include <stdint.h>
+#include <rte_common.h>
+#include <rte_config.h>
#include <rte_mempool.h>
#include <rte_memory.h>
#include <rte_atomic.h>
#include <rte_prefetch.h>
#include <rte_branch_prediction.h>
+#include <rte_mbuf_ptype.h>
#ifdef __cplusplus
extern "C" {
#endif
-/* deprecated options */
-#pragma GCC poison RTE_MBUF_SCATTER_GATHER
-#pragma GCC poison RTE_MBUF_REFCNT
-
/*
* Packet Offload Features Flags. It also carry packet type information.
* Critical resources. Both rx/tx shared these bits. Be cautious on any change
*
* - RX flags start at bit position zero, and get added to the left of previous
* flags.
- * - The most-significant 8 bits are reserved for generic mbuf flags
- * - TX flags therefore start at bit position 55 (i.e. 63-8), and new flags get
- * added to the right of the previously defined flags
+ * - The most-significant 3 bits are reserved for generic mbuf flags
+ * - TX flags therefore start at bit position 60 (i.e. 63-3), and new flags get
+ * added to the right of the previously defined flags i.e. they should count
+ * downwards, not upwards.
*
* Keep these flags synchronized with rte_get_rx_ol_flag_name() and
* rte_get_tx_ol_flag_name().
*/
-#define PKT_RX_VLAN_PKT (1ULL << 0) /**< RX packet is a 802.1q VLAN packet. */
+
+/**
+ * The RX packet is a 802.1q VLAN packet, and the tci has been
+ * saved in in mbuf->vlan_tci.
+ * If the flag PKT_RX_VLAN_STRIPPED is also present, the VLAN
+ * header has been stripped from mbuf data, else it is still
+ * present.
+ */
+#define PKT_RX_VLAN (1ULL << 0)
+
#define PKT_RX_RSS_HASH (1ULL << 1) /**< RX packet with RSS hash result. */
#define PKT_RX_FDIR (1ULL << 2) /**< RX packet with FDIR match indicate. */
-#define PKT_RX_L4_CKSUM_BAD (1ULL << 3) /**< L4 cksum of RX pkt. is not OK. */
-#define PKT_RX_IP_CKSUM_BAD (1ULL << 4) /**< IP cksum of RX pkt. is not OK. */
-#define PKT_RX_EIP_CKSUM_BAD (0ULL << 0) /**< External IP header checksum error. */
-#define PKT_RX_OVERSIZE (0ULL << 0) /**< Num of desc of an RX pkt oversize. */
-#define PKT_RX_HBUF_OVERFLOW (0ULL << 0) /**< Header buffer overflow. */
-#define PKT_RX_RECIP_ERR (0ULL << 0) /**< Hardware processing error. */
-#define PKT_RX_MAC_ERR (0ULL << 0) /**< MAC error. */
-#define PKT_RX_IPV4_HDR (1ULL << 5) /**< RX packet with IPv4 header. */
-#define PKT_RX_IPV4_HDR_EXT (1ULL << 6) /**< RX packet with extended IPv4 header. */
-#define PKT_RX_IPV6_HDR (1ULL << 7) /**< RX packet with IPv6 header. */
-#define PKT_RX_IPV6_HDR_EXT (1ULL << 8) /**< RX packet with extended IPv6 header. */
+
+/**
+ * Deprecated.
+ * Checking this flag alone is deprecated: check the 2 bits of
+ * PKT_RX_L4_CKSUM_MASK.
+ * This flag was set when the L4 checksum of a packet was detected as
+ * wrong by the hardware.
+ */
+#define PKT_RX_L4_CKSUM_BAD (1ULL << 3)
+
+/**
+ * Deprecated.
+ * Checking this flag alone is deprecated: check the 2 bits of
+ * PKT_RX_IP_CKSUM_MASK.
+ * This flag was set when the IP checksum of a packet was detected as
+ * wrong by the hardware.
+ */
+#define PKT_RX_IP_CKSUM_BAD (1ULL << 4)
+
+#define PKT_RX_EIP_CKSUM_BAD (1ULL << 5) /**< External IP header checksum error. */
+
+/**
+ * A vlan has been stripped by the hardware and its tci is saved in
+ * mbuf->vlan_tci. This can only happen if vlan stripping is enabled
+ * in the RX configuration of the PMD.
+ * When PKT_RX_VLAN_STRIPPED is set, PKT_RX_VLAN must also be set.
+ */
+#define PKT_RX_VLAN_STRIPPED (1ULL << 6)
+
+/**
+ * Mask of bits used to determine the status of RX IP checksum.
+ * - PKT_RX_IP_CKSUM_UNKNOWN: no information about the RX IP checksum
+ * - PKT_RX_IP_CKSUM_BAD: the IP checksum in the packet is wrong
+ * - PKT_RX_IP_CKSUM_GOOD: the IP checksum in the packet is valid
+ * - PKT_RX_IP_CKSUM_NONE: the IP checksum is not correct in the packet
+ * data, but the integrity of the IP header is verified.
+ */
+#define PKT_RX_IP_CKSUM_MASK ((1ULL << 4) | (1ULL << 7))
+
+#define PKT_RX_IP_CKSUM_UNKNOWN 0
+#define PKT_RX_IP_CKSUM_BAD (1ULL << 4)
+#define PKT_RX_IP_CKSUM_GOOD (1ULL << 7)
+#define PKT_RX_IP_CKSUM_NONE ((1ULL << 4) | (1ULL << 7))
+
+/**
+ * Mask of bits used to determine the status of RX L4 checksum.
+ * - PKT_RX_L4_CKSUM_UNKNOWN: no information about the RX L4 checksum
+ * - PKT_RX_L4_CKSUM_BAD: the L4 checksum in the packet is wrong
+ * - PKT_RX_L4_CKSUM_GOOD: the L4 checksum in the packet is valid
+ * - PKT_RX_L4_CKSUM_NONE: the L4 checksum is not correct in the packet
+ * data, but the integrity of the L4 data is verified.
+ */
+#define PKT_RX_L4_CKSUM_MASK ((1ULL << 3) | (1ULL << 8))
+
+#define PKT_RX_L4_CKSUM_UNKNOWN 0
+#define PKT_RX_L4_CKSUM_BAD (1ULL << 3)
+#define PKT_RX_L4_CKSUM_GOOD (1ULL << 8)
+#define PKT_RX_L4_CKSUM_NONE ((1ULL << 3) | (1ULL << 8))
+
#define PKT_RX_IEEE1588_PTP (1ULL << 9) /**< RX IEEE1588 L2 Ethernet PT Packet. */
#define PKT_RX_IEEE1588_TMST (1ULL << 10) /**< RX IEEE1588 L2/L4 timestamped packet.*/
-#define PKT_RX_TUNNEL_IPV4_HDR (1ULL << 11) /**< RX tunnel packet with IPv4 header.*/
-#define PKT_RX_TUNNEL_IPV6_HDR (1ULL << 12) /**< RX tunnel packet with IPv6 header. */
#define PKT_RX_FDIR_ID (1ULL << 13) /**< FD id reported if FDIR match. */
#define PKT_RX_FDIR_FLX (1ULL << 14) /**< Flexible bytes reported if FDIR match. */
+
+/**
+ * The 2 vlans have been stripped by the hardware and their tci are
+ * saved in mbuf->vlan_tci (inner) and mbuf->vlan_tci_outer (outer).
+ * This can only happen if vlan stripping is enabled in the RX
+ * configuration of the PMD. If this flag is set,
+ * When PKT_RX_QINQ_STRIPPED is set, the flags (PKT_RX_VLAN |
+ * PKT_RX_VLAN_STRIPPED | PKT_RX_QINQ) must also be set.
+ */
+#define PKT_RX_QINQ_STRIPPED (1ULL << 15)
+
+/**
+ * When packets are coalesced by a hardware or virtual driver, this flag
+ * can be set in the RX mbuf, meaning that the m->tso_segsz field is
+ * valid and is set to the segment size of original packets.
+ */
+#define PKT_RX_LRO (1ULL << 16)
+
+/**
+ * Indicate that the timestamp field in the mbuf is valid.
+ */
+#define PKT_RX_TIMESTAMP (1ULL << 17)
+
+/**
+ * Indicate that security offload processing was applied on the RX packet.
+ */
+#define PKT_RX_SEC_OFFLOAD (1ULL << 18)
+
+/**
+ * Indicate that security offload processing failed on the RX packet.
+ */
+#define PKT_RX_SEC_OFFLOAD_FAILED (1ULL << 19)
+
+/**
+ * The RX packet is a double VLAN, and the outer tci has been
+ * saved in in mbuf->vlan_tci_outer.
+ * If the flag PKT_RX_QINQ_STRIPPED is also present, both VLANs
+ * headers have been stripped from mbuf data, else they are still
+ * present.
+ */
+#define PKT_RX_QINQ (1ULL << 20)
+
/* add new RX flags here */
/* add new TX flags here */
+/**
+ * UDP Fragmentation Offload flag. This flag is used for enabling UDP
+ * fragmentation in SW or in HW. When use UFO, mbuf->tso_segsz is used
+ * to store the MSS of UDP fragments.
+ */
+#define PKT_TX_UDP_SEG (1ULL << 42)
+
+/**
+ * Request security offload processing on the TX packet.
+ */
+#define PKT_TX_SEC_OFFLOAD (1ULL << 43)
+
+/**
+ * Offload the MACsec. This flag must be set by the application to enable
+ * this offload feature for a packet to be transmitted.
+ */
+#define PKT_TX_MACSEC (1ULL << 44)
+
+/**
+ * Bits 45:48 used for the tunnel type.
+ * When doing Tx offload like TSO or checksum, the HW needs to configure the
+ * tunnel type into the HW descriptors.
+ */
+#define PKT_TX_TUNNEL_VXLAN (0x1ULL << 45)
+#define PKT_TX_TUNNEL_GRE (0x2ULL << 45)
+#define PKT_TX_TUNNEL_IPIP (0x3ULL << 45)
+#define PKT_TX_TUNNEL_GENEVE (0x4ULL << 45)
+/**< TX packet with MPLS-in-UDP RFC 7510 header. */
+#define PKT_TX_TUNNEL_MPLSINUDP (0x5ULL << 45)
+/* add new TX TUNNEL type here */
+#define PKT_TX_TUNNEL_MASK (0xFULL << 45)
+
+/**
+ * Second VLAN insertion (QinQ) flag.
+ */
+#define PKT_TX_QINQ_PKT (1ULL << 49) /**< TX packet with double VLAN inserted. */
+
/**
* TCP segmentation offload. To enable this offload feature for a
* packet to be transmitted on hardware supporting TSO:
*/
#define PKT_TX_OUTER_IPV6 (1ULL << 60)
+/**
+ * Bitmask of all supported packet Tx offload features flags,
+ * which can be set for packet.
+ */
+#define PKT_TX_OFFLOAD_MASK ( \
+ PKT_TX_IP_CKSUM | \
+ PKT_TX_L4_MASK | \
+ PKT_TX_OUTER_IP_CKSUM | \
+ PKT_TX_TCP_SEG | \
+ PKT_TX_IEEE1588_TMST | \
+ PKT_TX_QINQ_PKT | \
+ PKT_TX_VLAN_PKT | \
+ PKT_TX_TUNNEL_MASK | \
+ PKT_TX_MACSEC | \
+ PKT_TX_SEC_OFFLOAD)
+
+#define __RESERVED (1ULL << 61) /**< reserved for future mbuf use */
+
#define IND_ATTACHED_MBUF (1ULL << 62) /**< Indirect attached mbuf */
/* Use final bit of flags to indicate a control mbuf */
#define CTRL_MBUF_FLAG (1ULL << 63) /**< Mbuf contains control data */
+/** Alignment constraint of mbuf private area. */
+#define RTE_MBUF_PRIV_ALIGN 8
+
/**
* Get the name of a RX offload flag
*
*/
const char *rte_get_rx_ol_flag_name(uint64_t mask);
+/**
+ * Dump the list of RX offload flags in a buffer
+ *
+ * @param mask
+ * The mask describing the RX flags.
+ * @param buf
+ * The output buffer.
+ * @param buflen
+ * The length of the buffer.
+ * @return
+ * 0 on success, (-1) on error.
+ */
+int rte_get_rx_ol_flag_list(uint64_t mask, char *buf, size_t buflen);
+
/**
* Get the name of a TX offload flag
*
*/
const char *rte_get_tx_ol_flag_name(uint64_t mask);
+/**
+ * Dump the list of TX offload flags in a buffer
+ *
+ * @param mask
+ * The mask describing the TX flags.
+ * @param buf
+ * The output buffer.
+ * @param buflen
+ * The length of the buffer.
+ * @return
+ * 0 on success, (-1) on error.
+ */
+int rte_get_tx_ol_flag_list(uint64_t mask, char *buf, size_t buflen);
+
/**
* Some NICs need at least 2KB buffer to RX standard Ethernet frame without
* splitting it into multiple segments.
/* define a set of marker types that can be used to refer to set points in the
* mbuf */
+__extension__
typedef void *MARKER[0]; /**< generic marker for a point in a structure */
+__extension__
typedef uint8_t MARKER8[0]; /**< generic marker with 1B alignment */
+__extension__
typedef uint64_t MARKER64[0]; /**< marker that allows us to overwrite 8 bytes
* with a single assignment */
MARKER cacheline0;
void *buf_addr; /**< Virtual address of segment buffer. */
- phys_addr_t buf_physaddr; /**< Physical address of segment buffer. */
-
- uint16_t buf_len; /**< Length of segment buffer. */
+ /**
+ * Physical address of segment buffer.
+ * Force alignment to 8-bytes, so as to ensure we have the exact
+ * same mbuf cacheline0 layout for 32-bit and 64-bit. This makes
+ * working on vector drivers easier.
+ */
+ RTE_STD_C11
+ union {
+ rte_iova_t buf_iova;
+ rte_iova_t buf_physaddr; /**< deprecated */
+ } __rte_aligned(sizeof(rte_iova_t));
- /* next 6 bytes are initialised on RX descriptor rearm */
- MARKER8 rearm_data;
+ /* next 8 bytes are initialised on RX descriptor rearm */
+ MARKER64 rearm_data;
uint16_t data_off;
/**
- * 16-bit Reference counter.
+ * Reference counter. Its size should at least equal to the size
+ * of port field (16 bits), to support zero-copy broadcast.
* It should only be accessed using the following functions:
* rte_mbuf_refcnt_update(), rte_mbuf_refcnt_read(), and
* rte_mbuf_refcnt_set(). The functionality of these functions (atomic,
* or non-atomic) is controlled by the CONFIG_RTE_MBUF_REFCNT_ATOMIC
* config option.
*/
+ RTE_STD_C11
union {
rte_atomic16_t refcnt_atomic; /**< Atomically accessed refcnt */
uint16_t refcnt; /**< Non-atomically accessed refcnt */
};
- uint8_t nb_segs; /**< Number of segments. */
- uint8_t port; /**< Input port. */
+ uint16_t nb_segs; /**< Number of segments. */
+
+ /** Input port (16 bits to support more than 256 virtual ports). */
+ uint16_t port;
uint64_t ol_flags; /**< Offload features. */
/* remaining bytes are set on RX when pulling packet from descriptor */
MARKER rx_descriptor_fields1;
- /**
- * The packet type, which is used to indicate ordinary packet and also
- * tunneled packet format, i.e. each number is represented a type of
- * packet.
+ /*
+ * The packet type, which is the combination of outer/inner L2, L3, L4
+ * and tunnel types. The packet_type is about data really present in the
+ * mbuf. Example: if vlan stripping is enabled, a received vlan packet
+ * would have RTE_PTYPE_L2_ETHER and not RTE_PTYPE_L2_VLAN because the
+ * vlan is stripped from the data.
*/
- uint16_t packet_type;
+ RTE_STD_C11
+ union {
+ uint32_t packet_type; /**< L2/L3/L4 and tunnel information. */
+ struct {
+ uint32_t l2_type:4; /**< (Outer) L2 type. */
+ uint32_t l3_type:4; /**< (Outer) L3 type. */
+ uint32_t l4_type:4; /**< (Outer) L4 type. */
+ uint32_t tun_type:4; /**< Tunnel type. */
+ RTE_STD_C11
+ union {
+ uint8_t inner_esp_next_proto;
+ /**< ESP next protocol type, valid if
+ * RTE_PTYPE_TUNNEL_ESP tunnel type is set
+ * on both Tx and Rx.
+ */
+ __extension__
+ struct {
+ uint8_t inner_l2_type:4;
+ /**< Inner L2 type. */
+ uint8_t inner_l3_type:4;
+ /**< Inner L3 type. */
+ };
+ };
+ uint32_t inner_l4_type:4; /**< Inner L4 type. */
+ };
+ };
- uint16_t data_len; /**< Amount of data in segment buffer. */
uint32_t pkt_len; /**< Total pkt len: sum of all segments. */
- uint16_t vlan_tci; /**< VLAN Tag Control Identifier (CPU order) */
- uint16_t reserved;
+ uint16_t data_len; /**< Amount of data in segment buffer. */
+ /** VLAN TCI (CPU order), valid if PKT_RX_VLAN_STRIPPED is set. */
+ uint16_t vlan_tci;
+
union {
uint32_t rss; /**< RSS hash result if RSS enabled */
struct {
+ RTE_STD_C11
union {
struct {
uint16_t hash;
/**< First 4 flexible bytes or FD ID, dependent on
PKT_RX_FDIR_* flag in ol_flags. */
} fdir; /**< Filter identifier if FDIR enabled */
- uint32_t sched; /**< Hierarchical scheduler */
+ struct {
+ uint32_t lo;
+ uint32_t hi;
+ } sched; /**< Hierarchical scheduler */
uint32_t usr; /**< User defined tags. See rte_distributor_process() */
} hash; /**< hash information */
- uint32_t seqn; /**< Sequence number. See also rte_reorder_insert() */
+ /** Outer VLAN TCI (CPU order), valid if PKT_RX_QINQ_STRIPPED is set. */
+ uint16_t vlan_tci_outer;
+
+ uint16_t buf_len; /**< Length of segment buffer. */
+
+ /** Valid if PKT_RX_TIMESTAMP is set. The unit and time reference
+ * are not normalized but are always the same for a given port.
+ */
+ uint64_t timestamp;
/* second cache line - fields only used in slow path or on TX */
- MARKER cacheline1 __rte_cache_aligned;
+ MARKER cacheline1 __rte_cache_min_aligned;
+ RTE_STD_C11
union {
void *userdata; /**< Can be used for external metadata */
uint64_t udata64; /**< Allow 8-byte userdata on 32-bit */
struct rte_mbuf *next; /**< Next segment of scattered packet. */
/* fields to support TX offloads */
+ RTE_STD_C11
union {
uint64_t tx_offload; /**< combined for easy fetch */
+ __extension__
struct {
- uint64_t l2_len:7; /**< L2 (MAC) Header Length. */
+ uint64_t l2_len:7;
+ /**< L2 (MAC) Header Length for non-tunneling pkt.
+ * Outer_L4_len + ... + Inner_L2_len for tunneling pkt.
+ */
uint64_t l3_len:9; /**< L3 (IP) Header Length. */
uint64_t l4_len:8; /**< L4 (TCP/UDP) Header Length. */
uint64_t tso_segsz:16; /**< TCP TSO segment size */
/** Size of the application private data. In case of an indirect
* mbuf, it stores the direct mbuf private data size. */
uint16_t priv_size;
+
+ /** Timesync flags for use with IEEE1588. */
+ uint16_t timesync;
+
+ /** Sequence number. See also rte_reorder_insert(). */
+ uint32_t seqn;
+
} __rte_cache_aligned;
+/**< Maximum number of nb_segs allowed. */
+#define RTE_MBUF_MAX_NB_SEGS UINT16_MAX
+
+/**
+ * Prefetch the first part of the mbuf
+ *
+ * The first 64 bytes of the mbuf corresponds to fields that are used early
+ * in the receive path. If the cache line of the architecture is higher than
+ * 64B, the second part will also be prefetched.
+ *
+ * @param m
+ * The pointer to the mbuf.
+ */
+static inline void
+rte_mbuf_prefetch_part1(struct rte_mbuf *m)
+{
+ rte_prefetch0(&m->cacheline0);
+}
+
+/**
+ * Prefetch the second part of the mbuf
+ *
+ * The next 64 bytes of the mbuf corresponds to fields that are used in the
+ * transmit path. If the cache line of the architecture is higher than 64B,
+ * this function does nothing as it is expected that the full mbuf is
+ * already in cache.
+ *
+ * @param m
+ * The pointer to the mbuf.
+ */
+static inline void
+rte_mbuf_prefetch_part2(struct rte_mbuf *m)
+{
+#if RTE_CACHE_LINE_SIZE == 64
+ rte_prefetch0(&m->cacheline1);
+#else
+ RTE_SET_USED(m);
+#endif
+}
+
+
static inline uint16_t rte_pktmbuf_priv_size(struct rte_mempool *mp);
+/**
+ * Return the IO address of the beginning of the mbuf data
+ *
+ * @param mb
+ * The pointer to the mbuf.
+ * @return
+ * The IO address of the beginning of the mbuf data
+ */
+static inline rte_iova_t
+rte_mbuf_data_iova(const struct rte_mbuf *mb)
+{
+ return mb->buf_iova + mb->data_off;
+}
+
+__rte_deprecated
+static inline phys_addr_t
+rte_mbuf_data_dma_addr(const struct rte_mbuf *mb)
+{
+ return rte_mbuf_data_iova(mb);
+}
+
+/**
+ * Return the default IO address of the beginning of the mbuf data
+ *
+ * This function is used by drivers in their receive function, as it
+ * returns the location where data should be written by the NIC, taking
+ * the default headroom in account.
+ *
+ * @param mb
+ * The pointer to the mbuf.
+ * @return
+ * The IO address of the beginning of the mbuf data
+ */
+static inline rte_iova_t
+rte_mbuf_data_iova_default(const struct rte_mbuf *mb)
+{
+ return mb->buf_iova + RTE_PKTMBUF_HEADROOM;
+}
+
+__rte_deprecated
+static inline phys_addr_t
+rte_mbuf_data_dma_addr_default(const struct rte_mbuf *mb)
+{
+ return rte_mbuf_data_iova_default(mb);
+}
+
/**
* Return the mbuf owning the data buffer address of an indirect mbuf.
*
static inline struct rte_mbuf *
rte_mbuf_from_indirect(struct rte_mbuf *mi)
{
- struct rte_mbuf *md;
-
- /* mi->buf_addr and mi->priv_size correspond to buffer and
- * private size of the direct mbuf */
- md = (struct rte_mbuf *)((char *)mi->buf_addr - sizeof(*mi) -
- mi->priv_size);
- return md;
+ return (struct rte_mbuf *)RTE_PTR_SUB(mi->buf_addr, sizeof(*mi) + mi->priv_size);
}
/**
/** check mbuf type in debug mode */
#define __rte_mbuf_sanity_check(m, is_h) rte_mbuf_sanity_check(m, is_h)
-/** check mbuf type in debug mode if mbuf pointer is not null */
-#define __rte_mbuf_sanity_check_raw(m, is_h) do { \
- if ((m) != NULL) \
- rte_mbuf_sanity_check(m, is_h); \
-} while (0)
-
-/** MBUF asserts in debug mode */
-#define RTE_MBUF_ASSERT(exp) \
-if (!(exp)) { \
- rte_panic("line%d\tassert \"" #exp "\" failed\n", __LINE__); \
-}
-
#else /* RTE_LIBRTE_MBUF_DEBUG */
/** check mbuf type in debug mode */
#define __rte_mbuf_sanity_check(m, is_h) do { } while (0)
-/** check mbuf type in debug mode if mbuf pointer is not null */
-#define __rte_mbuf_sanity_check_raw(m, is_h) do { } while (0)
-
-/** MBUF asserts in debug mode */
-#define RTE_MBUF_ASSERT(exp) do { } while (0)
-
#endif /* RTE_LIBRTE_MBUF_DEBUG */
#ifdef RTE_MBUF_REFCNT_ATOMIC
rte_atomic16_set(&m->refcnt_atomic, new_value);
}
+/* internal */
+static inline uint16_t
+__rte_mbuf_refcnt_update(struct rte_mbuf *m, int16_t value)
+{
+ return (uint16_t)(rte_atomic16_add_return(&m->refcnt_atomic, value));
+}
+
/**
* Adds given value to an mbuf's refcnt and returns its new value.
* @param m
return 1 + value;
}
- return (uint16_t)(rte_atomic16_add_return(&m->refcnt_atomic, value));
+ return __rte_mbuf_refcnt_update(m, value);
}
#else /* ! RTE_MBUF_REFCNT_ATOMIC */
+/* internal */
+static inline uint16_t
+__rte_mbuf_refcnt_update(struct rte_mbuf *m, int16_t value)
+{
+ m->refcnt = (uint16_t)(m->refcnt + value);
+ return m->refcnt;
+}
+
/**
* Adds given value to an mbuf's refcnt and returns its new value.
*/
static inline uint16_t
rte_mbuf_refcnt_update(struct rte_mbuf *m, int16_t value)
{
- m->refcnt = (uint16_t)(m->refcnt + value);
- return m->refcnt;
+ return __rte_mbuf_refcnt_update(m, value);
}
/**
void
rte_mbuf_sanity_check(const struct rte_mbuf *m, int is_header);
+#define MBUF_RAW_ALLOC_CHECK(m) do { \
+ RTE_ASSERT(rte_mbuf_refcnt_read(m) == 1); \
+ RTE_ASSERT((m)->next == NULL); \
+ RTE_ASSERT((m)->nb_segs == 1); \
+ __rte_mbuf_sanity_check(m, 0); \
+} while (0)
+
/**
- * @internal Allocate a new mbuf from mempool *mp*.
- * The use of that function is reserved for RTE internal needs.
- * Please use rte_pktmbuf_alloc().
+ * Allocate an uninitialized mbuf from mempool *mp*.
+ *
+ * This function can be used by PMDs (especially in RX functions) to
+ * allocate an uninitialized mbuf. The driver is responsible of
+ * initializing all the required fields. See rte_pktmbuf_reset().
+ * For standard needs, prefer rte_pktmbuf_alloc().
+ *
+ * The caller can expect that the following fields of the mbuf structure
+ * are initialized: buf_addr, buf_iova, buf_len, refcnt=1, nb_segs=1,
+ * next=NULL, pool, priv_size. The other fields must be initialized
+ * by the caller.
*
* @param mp
* The mempool from which mbuf is allocated.
* - The pointer to the new mbuf on success.
* - NULL if allocation failed.
*/
-static inline struct rte_mbuf *__rte_mbuf_raw_alloc(struct rte_mempool *mp)
+static inline struct rte_mbuf *rte_mbuf_raw_alloc(struct rte_mempool *mp)
{
struct rte_mbuf *m;
void *mb = NULL;
+
if (rte_mempool_get(mp, &mb) < 0)
return NULL;
m = (struct rte_mbuf *)mb;
- RTE_MBUF_ASSERT(rte_mbuf_refcnt_read(m) == 0);
- rte_mbuf_refcnt_set(m, 1);
- return (m);
+ MBUF_RAW_ALLOC_CHECK(m);
+ return m;
}
/**
- * @internal Put mbuf back into its original mempool.
- * The use of that function is reserved for RTE internal needs.
- * Please use rte_pktmbuf_free().
+ * Put mbuf back into its original mempool.
+ *
+ * The caller must ensure that the mbuf is direct and properly
+ * reinitialized (refcnt=1, next=NULL, nb_segs=1), as done by
+ * rte_pktmbuf_prefree_seg().
+ *
+ * This function should be used with care, when optimization is
+ * required. For standard needs, prefer rte_pktmbuf_free() or
+ * rte_pktmbuf_free_seg().
*
* @param m
* The mbuf to be freed.
*/
-static inline void __attribute__((always_inline))
-__rte_mbuf_raw_free(struct rte_mbuf *m)
+static __rte_always_inline void
+rte_mbuf_raw_free(struct rte_mbuf *m)
{
- RTE_MBUF_ASSERT(rte_mbuf_refcnt_read(m) == 0);
+ RTE_ASSERT(RTE_MBUF_DIRECT(m));
+ RTE_ASSERT(rte_mbuf_refcnt_read(m) == 1);
+ RTE_ASSERT(m->next == NULL);
+ RTE_ASSERT(m->nb_segs == 1);
+ __rte_mbuf_sanity_check(m, 0);
rte_mempool_put(m->pool, m);
}
+/* compat with older versions */
+__rte_deprecated
+static inline void
+__rte_mbuf_raw_free(struct rte_mbuf *m)
+{
+ rte_mbuf_raw_free(m);
+}
+
/* Operations on ctrl mbuf */
/**
* This function initializes some fields in an mbuf structure that are
* not modified by the user once created (mbuf type, origin pool, buffer
* start address, and so on). This function is given as a callback function
- * to rte_mempool_create() at pool creation time.
+ * to rte_mempool_obj_iter() or rte_mempool_create() at pool creation time.
*
* @param mp
* The mempool from which the mbuf is allocated.
* @param opaque_arg
* A pointer that can be used by the user to retrieve useful information
- * for mbuf initialization. This pointer comes from the ``init_arg``
- * parameter of rte_mempool_create().
+ * for mbuf initialization. This pointer is the opaque argument passed to
+ * rte_mempool_obj_iter() or rte_mempool_create().
* @param m
* The mbuf to initialize.
* @param i
static inline int
rte_is_ctrlmbuf(struct rte_mbuf *m)
{
- return (!!(m->ol_flags & CTRL_MBUF_FLAG));
+ return !!(m->ol_flags & CTRL_MBUF_FLAG);
}
/* Operations on pkt mbuf */
* This function initializes some fields in the mbuf structure that are
* not modified by the user once created (origin pool, buffer start
* address, and so on). This function is given as a callback function to
- * rte_mempool_create() at pool creation time.
+ * rte_mempool_obj_iter() or rte_mempool_create() at pool creation time.
*
* @param mp
* The mempool from which mbufs originate.
* @param opaque_arg
* A pointer that can be used by the user to retrieve useful information
- * for mbuf initialization. This pointer comes from the ``init_arg``
- * parameter of rte_mempool_create().
+ * for mbuf initialization. This pointer is the opaque argument passed to
+ * rte_mempool_obj_iter() or rte_mempool_create().
* @param m
* The mbuf to initialize.
* @param i
*
* This function initializes the mempool private data in the case of a
* pktmbuf pool. This private data is needed by the driver. The
- * function is given as a callback function to rte_mempool_create() at
+ * function must be called on the mempool before it is used, or it
+ * can be given as a callback function to rte_mempool_create() at
* pool creation. It can be extended by the user, for example, to
* provide another packet size.
*
* The mempool from which mbufs originate.
* @param opaque_arg
* A pointer that can be used by the user to retrieve useful information
- * for mbuf initialization. This pointer comes from the ``init_arg``
- * parameter of rte_mempool_create().
+ * for mbuf initialization. This pointer is the opaque argument passed to
+ * rte_mempool_create().
*/
void rte_pktmbuf_pool_init(struct rte_mempool *mp, void *opaque_arg);
* Create a mbuf pool.
*
* This function creates and initializes a packet mbuf pool. It is
- * a wrapper to rte_mempool_create() with the proper packet constructor
- * and mempool constructor.
+ * a wrapper to rte_mempool functions.
*
* @param name
* The name of the mbuf pool.
* details.
* @param priv_size
* Size of application private are between the rte_mbuf structure
- * and the data buffer.
+ * and the data buffer. This value must be aligned to RTE_MBUF_PRIV_ALIGN.
* @param data_room_size
* Size of data buffer in each mbuf, including RTE_PKTMBUF_HEADROOM.
* @param socket_id
* with rte_errno set appropriately. Possible rte_errno values include:
* - E_RTE_NO_CONFIG - function could not get pointer to rte_config structure
* - E_RTE_SECONDARY - function was called from a secondary process instance
- * - EINVAL - cache size provided is too large
+ * - EINVAL - cache size provided is too large, or priv_size is not aligned.
* - ENOSPC - the maximum number of memzones has already been allocated
* - EEXIST - a memzone with the same name already exists
* - ENOMEM - no appropriate memory area found in which to create memzone
return mbp_priv->mbuf_priv_size;
}
+/**
+ * Reset the data_off field of a packet mbuf to its default value.
+ *
+ * The given mbuf must have only one segment, which should be empty.
+ *
+ * @param m
+ * The packet mbuf's data_off field has to be reset.
+ */
+static inline void rte_pktmbuf_reset_headroom(struct rte_mbuf *m)
+{
+ m->data_off = RTE_MIN(RTE_PKTMBUF_HEADROOM, (uint16_t)m->buf_len);
+}
+
/**
* Reset the fields of a packet mbuf to their default values.
*
* @param m
* The packet mbuf to be resetted.
*/
+#define MBUF_INVALID_PORT UINT16_MAX
+
static inline void rte_pktmbuf_reset(struct rte_mbuf *m)
{
m->next = NULL;
m->pkt_len = 0;
m->tx_offload = 0;
m->vlan_tci = 0;
+ m->vlan_tci_outer = 0;
m->nb_segs = 1;
- m->port = 0xff;
+ m->port = MBUF_INVALID_PORT;
m->ol_flags = 0;
m->packet_type = 0;
- m->data_off = (RTE_PKTMBUF_HEADROOM <= m->buf_len) ?
- RTE_PKTMBUF_HEADROOM : m->buf_len;
+ rte_pktmbuf_reset_headroom(m);
m->data_len = 0;
__rte_mbuf_sanity_check(m, 1);
static inline struct rte_mbuf *rte_pktmbuf_alloc(struct rte_mempool *mp)
{
struct rte_mbuf *m;
- if ((m = __rte_mbuf_raw_alloc(mp)) != NULL)
+ if ((m = rte_mbuf_raw_alloc(mp)) != NULL)
rte_pktmbuf_reset(m);
- return (m);
+ return m;
+}
+
+/**
+ * Allocate a bulk of mbufs, initialize refcnt and reset the fields to default
+ * values.
+ *
+ * @param pool
+ * The mempool from which mbufs are allocated.
+ * @param mbufs
+ * Array of pointers to mbufs
+ * @param count
+ * Array size
+ * @return
+ * - 0: Success
+ * - -ENOENT: Not enough entries in the mempool; no mbufs are retrieved.
+ */
+static inline int rte_pktmbuf_alloc_bulk(struct rte_mempool *pool,
+ struct rte_mbuf **mbufs, unsigned count)
+{
+ unsigned idx = 0;
+ int rc;
+
+ rc = rte_mempool_get_bulk(pool, (void **)mbufs, count);
+ if (unlikely(rc))
+ return rc;
+
+ /* To understand duff's device on loop unwinding optimization, see
+ * https://en.wikipedia.org/wiki/Duff's_device.
+ * Here while() loop is used rather than do() while{} to avoid extra
+ * check if count is zero.
+ */
+ switch (count % 4) {
+ case 0:
+ while (idx != count) {
+ MBUF_RAW_ALLOC_CHECK(mbufs[idx]);
+ rte_pktmbuf_reset(mbufs[idx]);
+ idx++;
+ /* fall-through */
+ case 3:
+ MBUF_RAW_ALLOC_CHECK(mbufs[idx]);
+ rte_pktmbuf_reset(mbufs[idx]);
+ idx++;
+ /* fall-through */
+ case 2:
+ MBUF_RAW_ALLOC_CHECK(mbufs[idx]);
+ rte_pktmbuf_reset(mbufs[idx]);
+ idx++;
+ /* fall-through */
+ case 1:
+ MBUF_RAW_ALLOC_CHECK(mbufs[idx]);
+ rte_pktmbuf_reset(mbufs[idx]);
+ idx++;
+ /* fall-through */
+ }
+ }
+ return 0;
}
/**
*
* After attachment we refer the mbuf we attached as 'indirect',
* while mbuf we attached to as 'direct'.
+ * The direct mbuf's reference counter is incremented.
+ *
* Right now, not supported:
* - attachment for already indirect mbuf (e.g. - mi has to be direct).
* - mbuf we trying to attach (mi) is used by someone else
{
struct rte_mbuf *md;
- RTE_MBUF_ASSERT(RTE_MBUF_DIRECT(mi) &&
+ RTE_ASSERT(RTE_MBUF_DIRECT(mi) &&
rte_mbuf_refcnt_read(mi) == 1);
/* if m is not direct, get the mbuf that embeds the data */
rte_mbuf_refcnt_update(md, 1);
mi->priv_size = m->priv_size;
- mi->buf_physaddr = m->buf_physaddr;
+ mi->buf_iova = m->buf_iova;
mi->buf_addr = m->buf_addr;
mi->buf_len = m->buf_len;
- mi->next = m->next;
mi->data_off = m->data_off;
mi->data_len = m->data_len;
mi->port = m->port;
mi->vlan_tci = m->vlan_tci;
+ mi->vlan_tci_outer = m->vlan_tci_outer;
mi->tx_offload = m->tx_offload;
mi->hash = m->hash;
mi->nb_segs = 1;
mi->ol_flags = m->ol_flags | IND_ATTACHED_MBUF;
mi->packet_type = m->packet_type;
+ mi->timestamp = m->timestamp;
__rte_mbuf_sanity_check(mi, 1);
__rte_mbuf_sanity_check(m, 0);
*
* - restore original mbuf address and length values.
* - reset pktmbuf data and data_len to their default values.
- * All other fields of the given packet mbuf will be left intact.
+ * - decrement the direct mbuf's reference counter. When the
+ * reference counter becomes 0, the direct mbuf is freed.
+ *
+ * All other fields of the given packet mbuf will be left intact.
*
* @param m
* The indirect attached packet mbuf.
*/
static inline void rte_pktmbuf_detach(struct rte_mbuf *m)
{
+ struct rte_mbuf *md = rte_mbuf_from_indirect(m);
struct rte_mempool *mp = m->pool;
uint32_t mbuf_size, buf_len, priv_size;
m->priv_size = priv_size;
m->buf_addr = (char *)m + mbuf_size;
- m->buf_physaddr = rte_mempool_virt2phy(mp, m) + mbuf_size;
+ m->buf_iova = rte_mempool_virt2iova(m) + mbuf_size;
m->buf_len = (uint16_t)buf_len;
- m->data_off = RTE_MIN(RTE_PKTMBUF_HEADROOM, (uint16_t)m->buf_len);
+ rte_pktmbuf_reset_headroom(m);
m->data_len = 0;
m->ol_flags = 0;
+
+ if (rte_mbuf_refcnt_update(md, -1) == 0) {
+ md->next = NULL;
+ md->nb_segs = 1;
+ rte_mbuf_refcnt_set(md, 1);
+ rte_mbuf_raw_free(md);
+ }
}
-static inline struct rte_mbuf* __attribute__((always_inline))
-__rte_pktmbuf_prefree_seg(struct rte_mbuf *m)
+/**
+ * Decrease reference counter and unlink a mbuf segment
+ *
+ * This function does the same than a free, except that it does not
+ * return the segment to its pool.
+ * It decreases the reference counter, and if it reaches 0, it is
+ * detached from its parent for an indirect mbuf.
+ *
+ * @param m
+ * The mbuf to be unlinked
+ * @return
+ * - (m) if it is the last reference. It can be recycled or freed.
+ * - (NULL) if the mbuf still has remaining references on it.
+ */
+static __rte_always_inline struct rte_mbuf *
+rte_pktmbuf_prefree_seg(struct rte_mbuf *m)
{
__rte_mbuf_sanity_check(m, 0);
- if (likely(rte_mbuf_refcnt_update(m, -1) == 0)) {
+ if (likely(rte_mbuf_refcnt_read(m) == 1)) {
- /* if this is an indirect mbuf, then
- * - detach mbuf
- * - free attached mbuf segment
- */
- if (RTE_MBUF_INDIRECT(m)) {
- struct rte_mbuf *md = rte_mbuf_from_indirect(m);
+ if (RTE_MBUF_INDIRECT(m))
rte_pktmbuf_detach(m);
- if (rte_mbuf_refcnt_update(md, -1) == 0)
- __rte_mbuf_raw_free(md);
+
+ if (m->next != NULL) {
+ m->next = NULL;
+ m->nb_segs = 1;
}
- return(m);
+
+ return m;
+
+ } else if (__rte_mbuf_refcnt_update(m, -1) == 0) {
+
+ if (RTE_MBUF_INDIRECT(m))
+ rte_pktmbuf_detach(m);
+
+ if (m->next != NULL) {
+ m->next = NULL;
+ m->nb_segs = 1;
+ }
+ rte_mbuf_refcnt_set(m, 1);
+
+ return m;
}
- return (NULL);
+ return NULL;
+}
+
+/* deprecated, replaced by rte_pktmbuf_prefree_seg() */
+__rte_deprecated
+static inline struct rte_mbuf *
+__rte_pktmbuf_prefree_seg(struct rte_mbuf *m)
+{
+ return rte_pktmbuf_prefree_seg(m);
}
/**
* @param m
* The packet mbuf segment to be freed.
*/
-static inline void __attribute__((always_inline))
+static __rte_always_inline void
rte_pktmbuf_free_seg(struct rte_mbuf *m)
{
- if (likely(NULL != (m = __rte_pktmbuf_prefree_seg(m)))) {
- m->next = NULL;
- __rte_mbuf_raw_free(m);
- }
+ m = rte_pktmbuf_prefree_seg(m);
+ if (likely(m != NULL))
+ rte_mbuf_raw_free(m);
}
/**
{
struct rte_mbuf *mc, *mi, **prev;
uint32_t pktlen;
- uint8_t nseg;
+ uint16_t nseg;
if (unlikely ((mc = rte_pktmbuf_alloc(mp)) == NULL))
- return (NULL);
+ return NULL;
mi = mc;
prev = &mi->next;
/* Allocation of new indirect segment failed */
if (unlikely (mi == NULL)) {
rte_pktmbuf_free(mc);
- return (NULL);
+ return NULL;
}
__rte_mbuf_sanity_check(mc, 1);
- return (mc);
+ return mc;
}
/**
*/
static inline uint16_t rte_pktmbuf_headroom(const struct rte_mbuf *m)
{
- __rte_mbuf_sanity_check(m, 1);
+ __rte_mbuf_sanity_check(m, 0);
return m->data_off;
}
*/
static inline uint16_t rte_pktmbuf_tailroom(const struct rte_mbuf *m)
{
- __rte_mbuf_sanity_check(m, 1);
+ __rte_mbuf_sanity_check(m, 0);
return (uint16_t)(m->buf_len - rte_pktmbuf_headroom(m) -
m->data_len);
}
*/
static inline struct rte_mbuf *rte_pktmbuf_lastseg(struct rte_mbuf *m)
{
- struct rte_mbuf *m2 = (struct rte_mbuf *)m;
-
__rte_mbuf_sanity_check(m, 1);
- while (m2->next != NULL)
- m2 = m2->next;
- return m2;
+ while (m->next != NULL)
+ m = m->next;
+ return m;
}
+/**
+ * A macro that points to an offset into the data in the mbuf.
+ *
+ * The returned pointer is cast to type t. Before using this
+ * function, the user must ensure that the first segment is large
+ * enough to accommodate its data.
+ *
+ * @param m
+ * The packet mbuf.
+ * @param o
+ * The offset into the mbuf data.
+ * @param t
+ * The type to cast the result into.
+ */
+#define rte_pktmbuf_mtod_offset(m, t, o) \
+ ((t)((char *)(m)->buf_addr + (m)->data_off + (o)))
+
/**
* A macro that points to the start of the data in the mbuf.
*
* The returned pointer is cast to type t. Before using this
- * function, the user must ensure that m_headlen(m) is large enough to
- * read its data.
+ * function, the user must ensure that the first segment is large
+ * enough to accommodate its data.
*
* @param m
* The packet mbuf.
* @param t
* The type to cast the result into.
*/
-#define rte_pktmbuf_mtod(m, t) ((t)((char *)(m)->buf_addr + (m)->data_off))
+#define rte_pktmbuf_mtod(m, t) rte_pktmbuf_mtod_offset(m, t, 0)
+
+/**
+ * A macro that returns the IO address that points to an offset of the
+ * start of the data in the mbuf
+ *
+ * @param m
+ * The packet mbuf.
+ * @param o
+ * The offset into the data to calculate address from.
+ */
+#define rte_pktmbuf_iova_offset(m, o) \
+ (rte_iova_t)((m)->buf_iova + (m)->data_off + (o))
+
+/* deprecated */
+#define rte_pktmbuf_mtophys_offset(m, o) \
+ rte_pktmbuf_iova_offset(m, o)
+
+/**
+ * A macro that returns the IO address that points to the start of the
+ * data in the mbuf
+ *
+ * @param m
+ * The packet mbuf.
+ */
+#define rte_pktmbuf_iova(m) rte_pktmbuf_iova_offset(m, 0)
+
+/* deprecated */
+#define rte_pktmbuf_mtophys(m) rte_pktmbuf_iova(m)
/**
* A macro that returns the length of the packet.
}
/**
- * Dump an mbuf structure to the console.
+ * @internal used by rte_pktmbuf_read().
+ */
+const void *__rte_pktmbuf_read(const struct rte_mbuf *m, uint32_t off,
+ uint32_t len, void *buf);
+
+/**
+ * Read len data bytes in a mbuf at specified offset.
+ *
+ * If the data is contiguous, return the pointer in the mbuf data, else
+ * copy the data in the buffer provided by the user and return its
+ * pointer.
+ *
+ * @param m
+ * The pointer to the mbuf.
+ * @param off
+ * The offset of the data in the mbuf.
+ * @param len
+ * The amount of bytes to read.
+ * @param buf
+ * The buffer where data is copied if it is not contiguous in mbuf
+ * data. Its length should be at least equal to the len parameter.
+ * @return
+ * The pointer to the data, either in the mbuf if it is contiguous,
+ * or in the user buffer. If mbuf is too small, NULL is returned.
+ */
+static inline const void *rte_pktmbuf_read(const struct rte_mbuf *m,
+ uint32_t off, uint32_t len, void *buf)
+{
+ if (likely(off + len <= rte_pktmbuf_data_len(m)))
+ return rte_pktmbuf_mtod_offset(m, char *, off);
+ else
+ return __rte_pktmbuf_read(m, off, len, buf);
+}
+
+/**
+ * Chain an mbuf to another, thereby creating a segmented packet.
+ *
+ * Note: The implementation will do a linear walk over the segments to find
+ * the tail entry. For cases when there are many segments, it's better to
+ * chain the entries manually.
+ *
+ * @param head
+ * The head of the mbuf chain (the first packet)
+ * @param tail
+ * The mbuf to put last in the chain
+ *
+ * @return
+ * - 0, on success.
+ * - -EOVERFLOW, if the chain segment limit exceeded
+ */
+static inline int rte_pktmbuf_chain(struct rte_mbuf *head, struct rte_mbuf *tail)
+{
+ struct rte_mbuf *cur_tail;
+
+ /* Check for number-of-segments-overflow */
+ if (head->nb_segs + tail->nb_segs > RTE_MBUF_MAX_NB_SEGS)
+ return -EOVERFLOW;
+
+ /* Chain 'tail' onto the old tail */
+ cur_tail = rte_pktmbuf_lastseg(head);
+ cur_tail->next = tail;
+
+ /* accumulate number of segments and total length. */
+ head->nb_segs += tail->nb_segs;
+ head->pkt_len += tail->pkt_len;
+
+ /* pkt_len is only set in the head */
+ tail->pkt_len = tail->data_len;
+
+ return 0;
+}
+
+/**
+ * Validate general requirements for Tx offload in mbuf.
+ *
+ * This function checks correctness and completeness of Tx offload settings.
+ *
+ * @param m
+ * The packet mbuf to be validated.
+ * @return
+ * 0 if packet is valid
+ */
+static inline int
+rte_validate_tx_offload(const struct rte_mbuf *m)
+{
+ uint64_t ol_flags = m->ol_flags;
+ uint64_t inner_l3_offset = m->l2_len;
+
+ /* Does packet set any of available offloads? */
+ if (!(ol_flags & PKT_TX_OFFLOAD_MASK))
+ return 0;
+
+ if (ol_flags & PKT_TX_OUTER_IP_CKSUM)
+ inner_l3_offset += m->outer_l2_len + m->outer_l3_len;
+
+ /* Headers are fragmented */
+ if (rte_pktmbuf_data_len(m) < inner_l3_offset + m->l3_len + m->l4_len)
+ return -ENOTSUP;
+
+ /* IP checksum can be counted only for IPv4 packet */
+ if ((ol_flags & PKT_TX_IP_CKSUM) && (ol_flags & PKT_TX_IPV6))
+ return -EINVAL;
+
+ /* IP type not set when required */
+ if (ol_flags & (PKT_TX_L4_MASK | PKT_TX_TCP_SEG))
+ if (!(ol_flags & (PKT_TX_IPV4 | PKT_TX_IPV6)))
+ return -EINVAL;
+
+ /* Check requirements for TSO packet */
+ if (ol_flags & PKT_TX_TCP_SEG)
+ if ((m->tso_segsz == 0) ||
+ ((ol_flags & PKT_TX_IPV4) &&
+ !(ol_flags & PKT_TX_IP_CKSUM)))
+ return -EINVAL;
+
+ /* PKT_TX_OUTER_IP_CKSUM set for non outer IPv4 packet. */
+ if ((ol_flags & PKT_TX_OUTER_IP_CKSUM) &&
+ !(ol_flags & PKT_TX_OUTER_IPV4))
+ return -EINVAL;
+
+ return 0;
+}
+
+/**
+ * Linearize data in mbuf.
+ *
+ * This function moves the mbuf data in the first segment if there is enough
+ * tailroom. The subsequent segments are unchained and freed.
+ *
+ * @param mbuf
+ * mbuf to linearize
+ * @return
+ * - 0, on success
+ * - -1, on error
+ */
+static inline int
+rte_pktmbuf_linearize(struct rte_mbuf *mbuf)
+{
+ int seg_len, copy_len;
+ struct rte_mbuf *m;
+ struct rte_mbuf *m_next;
+ char *buffer;
+
+ if (rte_pktmbuf_is_contiguous(mbuf))
+ return 0;
+
+ /* Extend first segment to the total packet length */
+ copy_len = rte_pktmbuf_pkt_len(mbuf) - rte_pktmbuf_data_len(mbuf);
+
+ if (unlikely(copy_len > rte_pktmbuf_tailroom(mbuf)))
+ return -1;
+
+ buffer = rte_pktmbuf_mtod_offset(mbuf, char *, mbuf->data_len);
+ mbuf->data_len = (uint16_t)(mbuf->pkt_len);
+
+ /* Append data from next segments to the first one */
+ m = mbuf->next;
+ while (m != NULL) {
+ m_next = m->next;
+
+ seg_len = rte_pktmbuf_data_len(m);
+ rte_memcpy(buffer, rte_pktmbuf_mtod(m, char *), seg_len);
+ buffer += seg_len;
+
+ rte_pktmbuf_free_seg(m);
+ m = m_next;
+ }
+
+ mbuf->next = NULL;
+ mbuf->nb_segs = 1;
+
+ return 0;
+}
+
+/**
+ * Dump an mbuf structure to a file.
*
* Dump all fields for the given packet mbuf and all its associated
* segments (in the case of a chained buffer).