* buffers. The message buffers are stored in a mempool, using the
* RTE mempool library.
*
- * This library provide an API to allocate/free packet mbufs, which are
+ * The preferred way to create a mbuf pool is to use
+ * rte_pktmbuf_pool_create(). However, in some situations, an
+ * application may want to have more control (ex: populate the pool with
+ * specific memory), in this case it is possible to use functions from
+ * rte_mempool. See how rte_pktmbuf_pool_create() is implemented for
+ * details.
+ *
+ * This library provides an API to allocate/free packet mbufs, which are
* used to carry network packets.
*
* To understand the concepts of packet buffers or mbufs, you
#include <stdint.h>
#include <rte_common.h>
+#include <rte_config.h>
#include <rte_mempool.h>
#include <rte_memory.h>
#include <rte_atomic.h>
#include <rte_prefetch.h>
#include <rte_branch_prediction.h>
+#include <rte_mbuf_ptype.h>
#ifdef __cplusplus
extern "C" {
*/
/**
- * RX packet is a 802.1q VLAN packet. This flag was set by PMDs when
- * the packet is recognized as a VLAN, but the behavior between PMDs
- * was not the same. This flag is kept for some time to avoid breaking
- * applications and should be replaced by PKT_RX_VLAN_STRIPPED.
+ * The RX packet is a 802.1q VLAN packet, and the tci has been
+ * saved in in mbuf->vlan_tci.
+ * If the flag PKT_RX_VLAN_STRIPPED is also present, the VLAN
+ * header has been stripped from mbuf data, else it is still
+ * present.
*/
-#define PKT_RX_VLAN_PKT (1ULL << 0)
+#define PKT_RX_VLAN (1ULL << 0)
#define PKT_RX_RSS_HASH (1ULL << 1) /**< RX packet with RSS hash result. */
#define PKT_RX_FDIR (1ULL << 2) /**< RX packet with FDIR match indicate. */
-#define PKT_RX_L4_CKSUM_BAD (1ULL << 3) /**< L4 cksum of RX pkt. is not OK. */
-#define PKT_RX_IP_CKSUM_BAD (1ULL << 4) /**< IP cksum of RX pkt. is not OK. */
+
+/**
+ * Deprecated.
+ * Checking this flag alone is deprecated: check the 2 bits of
+ * PKT_RX_L4_CKSUM_MASK.
+ * This flag was set when the L4 checksum of a packet was detected as
+ * wrong by the hardware.
+ */
+#define PKT_RX_L4_CKSUM_BAD (1ULL << 3)
+
+/**
+ * Deprecated.
+ * Checking this flag alone is deprecated: check the 2 bits of
+ * PKT_RX_IP_CKSUM_MASK.
+ * This flag was set when the IP checksum of a packet was detected as
+ * wrong by the hardware.
+ */
+#define PKT_RX_IP_CKSUM_BAD (1ULL << 4)
+
#define PKT_RX_EIP_CKSUM_BAD (1ULL << 5) /**< External IP header checksum error. */
/**
* A vlan has been stripped by the hardware and its tci is saved in
* mbuf->vlan_tci. This can only happen if vlan stripping is enabled
* in the RX configuration of the PMD.
+ * When PKT_RX_VLAN_STRIPPED is set, PKT_RX_VLAN must also be set.
*/
#define PKT_RX_VLAN_STRIPPED (1ULL << 6)
-/* hole, some bits can be reused here */
+/**
+ * Mask of bits used to determine the status of RX IP checksum.
+ * - PKT_RX_IP_CKSUM_UNKNOWN: no information about the RX IP checksum
+ * - PKT_RX_IP_CKSUM_BAD: the IP checksum in the packet is wrong
+ * - PKT_RX_IP_CKSUM_GOOD: the IP checksum in the packet is valid
+ * - PKT_RX_IP_CKSUM_NONE: the IP checksum is not correct in the packet
+ * data, but the integrity of the IP header is verified.
+ */
+#define PKT_RX_IP_CKSUM_MASK ((1ULL << 4) | (1ULL << 7))
+
+#define PKT_RX_IP_CKSUM_UNKNOWN 0
+#define PKT_RX_IP_CKSUM_BAD (1ULL << 4)
+#define PKT_RX_IP_CKSUM_GOOD (1ULL << 7)
+#define PKT_RX_IP_CKSUM_NONE ((1ULL << 4) | (1ULL << 7))
+
+/**
+ * Mask of bits used to determine the status of RX L4 checksum.
+ * - PKT_RX_L4_CKSUM_UNKNOWN: no information about the RX L4 checksum
+ * - PKT_RX_L4_CKSUM_BAD: the L4 checksum in the packet is wrong
+ * - PKT_RX_L4_CKSUM_GOOD: the L4 checksum in the packet is valid
+ * - PKT_RX_L4_CKSUM_NONE: the L4 checksum is not correct in the packet
+ * data, but the integrity of the L4 data is verified.
+ */
+#define PKT_RX_L4_CKSUM_MASK ((1ULL << 3) | (1ULL << 8))
+
+#define PKT_RX_L4_CKSUM_UNKNOWN 0
+#define PKT_RX_L4_CKSUM_BAD (1ULL << 3)
+#define PKT_RX_L4_CKSUM_GOOD (1ULL << 8)
+#define PKT_RX_L4_CKSUM_NONE ((1ULL << 3) | (1ULL << 8))
#define PKT_RX_IEEE1588_PTP (1ULL << 9) /**< RX IEEE1588 L2 Ethernet PT Packet. */
#define PKT_RX_IEEE1588_TMST (1ULL << 10) /**< RX IEEE1588 L2/L4 timestamped packet.*/
* The 2 vlans have been stripped by the hardware and their tci are
* saved in mbuf->vlan_tci (inner) and mbuf->vlan_tci_outer (outer).
* This can only happen if vlan stripping is enabled in the RX
- * configuration of the PMD. If this flag is set, PKT_RX_VLAN_STRIPPED
- * must also be set.
+ * configuration of the PMD. If this flag is set,
+ * When PKT_RX_QINQ_STRIPPED is set, the flags (PKT_RX_VLAN |
+ * PKT_RX_VLAN_STRIPPED | PKT_RX_QINQ) must also be set.
*/
#define PKT_RX_QINQ_STRIPPED (1ULL << 15)
/**
- * Deprecated.
- * RX packet with double VLAN stripped.
- * This flag is replaced by PKT_RX_QINQ_STRIPPED.
+ * When packets are coalesced by a hardware or virtual driver, this flag
+ * can be set in the RX mbuf, meaning that the m->tso_segsz field is
+ * valid and is set to the segment size of original packets.
+ */
+#define PKT_RX_LRO (1ULL << 16)
+
+/**
+ * Indicate that the timestamp field in the mbuf is valid.
+ */
+#define PKT_RX_TIMESTAMP (1ULL << 17)
+
+/**
+ * Indicate that security offload processing was applied on the RX packet.
*/
-#define PKT_RX_QINQ_PKT PKT_RX_QINQ_STRIPPED
+#define PKT_RX_SEC_OFFLOAD (1ULL << 18)
+
+/**
+ * Indicate that security offload processing failed on the RX packet.
+ */
+#define PKT_RX_SEC_OFFLOAD_FAILED (1ULL << 19)
+
+/**
+ * The RX packet is a double VLAN, and the outer tci has been
+ * saved in in mbuf->vlan_tci_outer.
+ * If the flag PKT_RX_QINQ_STRIPPED is also present, both VLANs
+ * headers have been stripped from mbuf data, else they are still
+ * present.
+ */
+#define PKT_RX_QINQ (1ULL << 20)
/* add new RX flags here */
/* add new TX flags here */
+/**
+ * UDP Fragmentation Offload flag. This flag is used for enabling UDP
+ * fragmentation in SW or in HW. When use UFO, mbuf->tso_segsz is used
+ * to store the MSS of UDP fragments.
+ */
+#define PKT_TX_UDP_SEG (1ULL << 42)
+
+/**
+ * Request security offload processing on the TX packet.
+ */
+#define PKT_TX_SEC_OFFLOAD (1ULL << 43)
+
+/**
+ * Offload the MACsec. This flag must be set by the application to enable
+ * this offload feature for a packet to be transmitted.
+ */
+#define PKT_TX_MACSEC (1ULL << 44)
+
+/**
+ * Bits 45:48 used for the tunnel type.
+ * When doing Tx offload like TSO or checksum, the HW needs to configure the
+ * tunnel type into the HW descriptors.
+ */
+#define PKT_TX_TUNNEL_VXLAN (0x1ULL << 45)
+#define PKT_TX_TUNNEL_GRE (0x2ULL << 45)
+#define PKT_TX_TUNNEL_IPIP (0x3ULL << 45)
+#define PKT_TX_TUNNEL_GENEVE (0x4ULL << 45)
+/**< TX packet with MPLS-in-UDP RFC 7510 header. */
+#define PKT_TX_TUNNEL_MPLSINUDP (0x5ULL << 45)
+/* add new TX TUNNEL type here */
+#define PKT_TX_TUNNEL_MASK (0xFULL << 45)
+
/**
* Second VLAN insertion (QinQ) flag.
*/
*/
#define PKT_TX_OUTER_IPV6 (1ULL << 60)
+/**
+ * Bitmask of all supported packet Tx offload features flags,
+ * which can be set for packet.
+ */
+#define PKT_TX_OFFLOAD_MASK ( \
+ PKT_TX_IP_CKSUM | \
+ PKT_TX_L4_MASK | \
+ PKT_TX_OUTER_IP_CKSUM | \
+ PKT_TX_TCP_SEG | \
+ PKT_TX_IEEE1588_TMST | \
+ PKT_TX_QINQ_PKT | \
+ PKT_TX_VLAN_PKT | \
+ PKT_TX_TUNNEL_MASK | \
+ PKT_TX_MACSEC | \
+ PKT_TX_SEC_OFFLOAD)
+
#define __RESERVED (1ULL << 61) /**< reserved for future mbuf use */
#define IND_ATTACHED_MBUF (1ULL << 62) /**< Indirect attached mbuf */
/* Use final bit of flags to indicate a control mbuf */
#define CTRL_MBUF_FLAG (1ULL << 63) /**< Mbuf contains control data */
-/*
- * 32 bits are divided into several fields to mark packet types. Note that
- * each field is indexical.
- * - Bit 3:0 is for L2 types.
- * - Bit 7:4 is for L3 or outer L3 (for tunneling case) types.
- * - Bit 11:8 is for L4 or outer L4 (for tunneling case) types.
- * - Bit 15:12 is for tunnel types.
- * - Bit 19:16 is for inner L2 types.
- * - Bit 23:20 is for inner L3 types.
- * - Bit 27:24 is for inner L4 types.
- * - Bit 31:28 is reserved.
- *
- * To be compatible with Vector PMD, RTE_PTYPE_L3_IPV4, RTE_PTYPE_L3_IPV4_EXT,
- * RTE_PTYPE_L3_IPV6, RTE_PTYPE_L3_IPV6_EXT, RTE_PTYPE_L4_TCP, RTE_PTYPE_L4_UDP
- * and RTE_PTYPE_L4_SCTP should be kept as below in a contiguous 7 bits.
- *
- * Note that L3 types values are selected for checking IPV4/IPV6 header from
- * performance point of view. Reading annotations of RTE_ETH_IS_IPV4_HDR and
- * RTE_ETH_IS_IPV6_HDR is needed for any future changes of L3 type values.
- *
- * Note that the packet types of the same packet recognized by different
- * hardware may be different, as different hardware may have different
- * capability of packet type recognition.
- *
- * examples:
- * <'ether type'=0x0800
- * | 'version'=4, 'protocol'=0x29
- * | 'version'=6, 'next header'=0x3A
- * | 'ICMPv6 header'>
- * will be recognized on i40e hardware as packet type combination of,
- * RTE_PTYPE_L2_ETHER |
- * RTE_PTYPE_L3_IPV4_EXT_UNKNOWN |
- * RTE_PTYPE_TUNNEL_IP |
- * RTE_PTYPE_INNER_L3_IPV6_EXT_UNKNOWN |
- * RTE_PTYPE_INNER_L4_ICMP.
- *
- * <'ether type'=0x86DD
- * | 'version'=6, 'next header'=0x2F
- * | 'GRE header'
- * | 'version'=6, 'next header'=0x11
- * | 'UDP header'>
- * will be recognized on i40e hardware as packet type combination of,
- * RTE_PTYPE_L2_ETHER |
- * RTE_PTYPE_L3_IPV6_EXT_UNKNOWN |
- * RTE_PTYPE_TUNNEL_GRENAT |
- * RTE_PTYPE_INNER_L3_IPV6_EXT_UNKNOWN |
- * RTE_PTYPE_INNER_L4_UDP.
- */
-#define RTE_PTYPE_UNKNOWN 0x00000000
-/**
- * Ethernet packet type.
- * It is used for outer packet for tunneling cases.
- *
- * Packet format:
- * <'ether type'=[0x0800|0x86DD]>
- */
-#define RTE_PTYPE_L2_ETHER 0x00000001
-/**
- * Ethernet packet type for time sync.
- *
- * Packet format:
- * <'ether type'=0x88F7>
- */
-#define RTE_PTYPE_L2_ETHER_TIMESYNC 0x00000002
-/**
- * ARP (Address Resolution Protocol) packet type.
- *
- * Packet format:
- * <'ether type'=0x0806>
- */
-#define RTE_PTYPE_L2_ETHER_ARP 0x00000003
-/**
- * LLDP (Link Layer Discovery Protocol) packet type.
- *
- * Packet format:
- * <'ether type'=0x88CC>
- */
-#define RTE_PTYPE_L2_ETHER_LLDP 0x00000004
-/**
- * NSH (Network Service Header) packet type.
- *
- * Packet format:
- * <'ether type'=0x894F>
- */
-#define RTE_PTYPE_L2_ETHER_NSH 0x00000005
-/**
- * Mask of layer 2 packet types.
- * It is used for outer packet for tunneling cases.
- */
-#define RTE_PTYPE_L2_MASK 0x0000000f
-/**
- * IP (Internet Protocol) version 4 packet type.
- * It is used for outer packet for tunneling cases, and does not contain any
- * header option.
- *
- * Packet format:
- * <'ether type'=0x0800
- * | 'version'=4, 'ihl'=5>
- */
-#define RTE_PTYPE_L3_IPV4 0x00000010
-/**
- * IP (Internet Protocol) version 4 packet type.
- * It is used for outer packet for tunneling cases, and contains header
- * options.
- *
- * Packet format:
- * <'ether type'=0x0800
- * | 'version'=4, 'ihl'=[6-15], 'options'>
- */
-#define RTE_PTYPE_L3_IPV4_EXT 0x00000030
-/**
- * IP (Internet Protocol) version 6 packet type.
- * It is used for outer packet for tunneling cases, and does not contain any
- * extension header.
- *
- * Packet format:
- * <'ether type'=0x86DD
- * | 'version'=6, 'next header'=0x3B>
- */
-#define RTE_PTYPE_L3_IPV6 0x00000040
-/**
- * IP (Internet Protocol) version 4 packet type.
- * It is used for outer packet for tunneling cases, and may or maynot contain
- * header options.
- *
- * Packet format:
- * <'ether type'=0x0800
- * | 'version'=4, 'ihl'=[5-15], <'options'>>
- */
-#define RTE_PTYPE_L3_IPV4_EXT_UNKNOWN 0x00000090
-/**
- * IP (Internet Protocol) version 6 packet type.
- * It is used for outer packet for tunneling cases, and contains extension
- * headers.
- *
- * Packet format:
- * <'ether type'=0x86DD
- * | 'version'=6, 'next header'=[0x0|0x2B|0x2C|0x32|0x33|0x3C|0x87],
- * 'extension headers'>
- */
-#define RTE_PTYPE_L3_IPV6_EXT 0x000000c0
-/**
- * IP (Internet Protocol) version 6 packet type.
- * It is used for outer packet for tunneling cases, and may or maynot contain
- * extension headers.
- *
- * Packet format:
- * <'ether type'=0x86DD
- * | 'version'=6, 'next header'=[0x3B|0x0|0x2B|0x2C|0x32|0x33|0x3C|0x87],
- * <'extension headers'>>
- */
-#define RTE_PTYPE_L3_IPV6_EXT_UNKNOWN 0x000000e0
-/**
- * Mask of layer 3 packet types.
- * It is used for outer packet for tunneling cases.
- */
-#define RTE_PTYPE_L3_MASK 0x000000f0
-/**
- * TCP (Transmission Control Protocol) packet type.
- * It is used for outer packet for tunneling cases.
- *
- * Packet format:
- * <'ether type'=0x0800
- * | 'version'=4, 'protocol'=6, 'MF'=0>
- * or,
- * <'ether type'=0x86DD
- * | 'version'=6, 'next header'=6>
- */
-#define RTE_PTYPE_L4_TCP 0x00000100
-/**
- * UDP (User Datagram Protocol) packet type.
- * It is used for outer packet for tunneling cases.
- *
- * Packet format:
- * <'ether type'=0x0800
- * | 'version'=4, 'protocol'=17, 'MF'=0>
- * or,
- * <'ether type'=0x86DD
- * | 'version'=6, 'next header'=17>
- */
-#define RTE_PTYPE_L4_UDP 0x00000200
-/**
- * Fragmented IP (Internet Protocol) packet type.
- * It is used for outer packet for tunneling cases.
- *
- * It refers to those packets of any IP types, which can be recognized as
- * fragmented. A fragmented packet cannot be recognized as any other L4 types
- * (RTE_PTYPE_L4_TCP, RTE_PTYPE_L4_UDP, RTE_PTYPE_L4_SCTP, RTE_PTYPE_L4_ICMP,
- * RTE_PTYPE_L4_NONFRAG).
- *
- * Packet format:
- * <'ether type'=0x0800
- * | 'version'=4, 'MF'=1>
- * or,
- * <'ether type'=0x86DD
- * | 'version'=6, 'next header'=44>
- */
-#define RTE_PTYPE_L4_FRAG 0x00000300
-/**
- * SCTP (Stream Control Transmission Protocol) packet type.
- * It is used for outer packet for tunneling cases.
- *
- * Packet format:
- * <'ether type'=0x0800
- * | 'version'=4, 'protocol'=132, 'MF'=0>
- * or,
- * <'ether type'=0x86DD
- * | 'version'=6, 'next header'=132>
- */
-#define RTE_PTYPE_L4_SCTP 0x00000400
-/**
- * ICMP (Internet Control Message Protocol) packet type.
- * It is used for outer packet for tunneling cases.
- *
- * Packet format:
- * <'ether type'=0x0800
- * | 'version'=4, 'protocol'=1, 'MF'=0>
- * or,
- * <'ether type'=0x86DD
- * | 'version'=6, 'next header'=1>
- */
-#define RTE_PTYPE_L4_ICMP 0x00000500
-/**
- * Non-fragmented IP (Internet Protocol) packet type.
- * It is used for outer packet for tunneling cases.
- *
- * It refers to those packets of any IP types, while cannot be recognized as
- * any of above L4 types (RTE_PTYPE_L4_TCP, RTE_PTYPE_L4_UDP,
- * RTE_PTYPE_L4_FRAG, RTE_PTYPE_L4_SCTP, RTE_PTYPE_L4_ICMP).
- *
- * Packet format:
- * <'ether type'=0x0800
- * | 'version'=4, 'protocol'!=[6|17|132|1], 'MF'=0>
- * or,
- * <'ether type'=0x86DD
- * | 'version'=6, 'next header'!=[6|17|44|132|1]>
- */
-#define RTE_PTYPE_L4_NONFRAG 0x00000600
-/**
- * Mask of layer 4 packet types.
- * It is used for outer packet for tunneling cases.
- */
-#define RTE_PTYPE_L4_MASK 0x00000f00
-/**
- * IP (Internet Protocol) in IP (Internet Protocol) tunneling packet type.
- *
- * Packet format:
- * <'ether type'=0x0800
- * | 'version'=4, 'protocol'=[4|41]>
- * or,
- * <'ether type'=0x86DD
- * | 'version'=6, 'next header'=[4|41]>
- */
-#define RTE_PTYPE_TUNNEL_IP 0x00001000
-/**
- * GRE (Generic Routing Encapsulation) tunneling packet type.
- *
- * Packet format:
- * <'ether type'=0x0800
- * | 'version'=4, 'protocol'=47>
- * or,
- * <'ether type'=0x86DD
- * | 'version'=6, 'next header'=47>
- */
-#define RTE_PTYPE_TUNNEL_GRE 0x00002000
-/**
- * VXLAN (Virtual eXtensible Local Area Network) tunneling packet type.
- *
- * Packet format:
- * <'ether type'=0x0800
- * | 'version'=4, 'protocol'=17
- * | 'destination port'=4798>
- * or,
- * <'ether type'=0x86DD
- * | 'version'=6, 'next header'=17
- * | 'destination port'=4798>
- */
-#define RTE_PTYPE_TUNNEL_VXLAN 0x00003000
-/**
- * NVGRE (Network Virtualization using Generic Routing Encapsulation) tunneling
- * packet type.
- *
- * Packet format:
- * <'ether type'=0x0800
- * | 'version'=4, 'protocol'=47
- * | 'protocol type'=0x6558>
- * or,
- * <'ether type'=0x86DD
- * | 'version'=6, 'next header'=47
- * | 'protocol type'=0x6558'>
- */
-#define RTE_PTYPE_TUNNEL_NVGRE 0x00004000
-/**
- * GENEVE (Generic Network Virtualization Encapsulation) tunneling packet type.
- *
- * Packet format:
- * <'ether type'=0x0800
- * | 'version'=4, 'protocol'=17
- * | 'destination port'=6081>
- * or,
- * <'ether type'=0x86DD
- * | 'version'=6, 'next header'=17
- * | 'destination port'=6081>
- */
-#define RTE_PTYPE_TUNNEL_GENEVE 0x00005000
-/**
- * Tunneling packet type of Teredo, VXLAN (Virtual eXtensible Local Area
- * Network) or GRE (Generic Routing Encapsulation) could be recognized as this
- * packet type, if they can not be recognized independently as of hardware
- * capability.
- */
-#define RTE_PTYPE_TUNNEL_GRENAT 0x00006000
-/**
- * Mask of tunneling packet types.
- */
-#define RTE_PTYPE_TUNNEL_MASK 0x0000f000
-/**
- * Ethernet packet type.
- * It is used for inner packet type only.
- *
- * Packet format (inner only):
- * <'ether type'=[0x800|0x86DD]>
- */
-#define RTE_PTYPE_INNER_L2_ETHER 0x00010000
-/**
- * Ethernet packet type with VLAN (Virtual Local Area Network) tag.
- *
- * Packet format (inner only):
- * <'ether type'=[0x800|0x86DD], vlan=[1-4095]>
- */
-#define RTE_PTYPE_INNER_L2_ETHER_VLAN 0x00020000
-/**
- * Mask of inner layer 2 packet types.
- */
-#define RTE_PTYPE_INNER_L2_MASK 0x000f0000
-/**
- * IP (Internet Protocol) version 4 packet type.
- * It is used for inner packet only, and does not contain any header option.
- *
- * Packet format (inner only):
- * <'ether type'=0x0800
- * | 'version'=4, 'ihl'=5>
- */
-#define RTE_PTYPE_INNER_L3_IPV4 0x00100000
-/**
- * IP (Internet Protocol) version 4 packet type.
- * It is used for inner packet only, and contains header options.
- *
- * Packet format (inner only):
- * <'ether type'=0x0800
- * | 'version'=4, 'ihl'=[6-15], 'options'>
- */
-#define RTE_PTYPE_INNER_L3_IPV4_EXT 0x00200000
-/**
- * IP (Internet Protocol) version 6 packet type.
- * It is used for inner packet only, and does not contain any extension header.
- *
- * Packet format (inner only):
- * <'ether type'=0x86DD
- * | 'version'=6, 'next header'=0x3B>
- */
-#define RTE_PTYPE_INNER_L3_IPV6 0x00300000
-/**
- * IP (Internet Protocol) version 4 packet type.
- * It is used for inner packet only, and may or maynot contain header options.
- *
- * Packet format (inner only):
- * <'ether type'=0x0800
- * | 'version'=4, 'ihl'=[5-15], <'options'>>
- */
-#define RTE_PTYPE_INNER_L3_IPV4_EXT_UNKNOWN 0x00400000
-/**
- * IP (Internet Protocol) version 6 packet type.
- * It is used for inner packet only, and contains extension headers.
- *
- * Packet format (inner only):
- * <'ether type'=0x86DD
- * | 'version'=6, 'next header'=[0x0|0x2B|0x2C|0x32|0x33|0x3C|0x87],
- * 'extension headers'>
- */
-#define RTE_PTYPE_INNER_L3_IPV6_EXT 0x00500000
-/**
- * IP (Internet Protocol) version 6 packet type.
- * It is used for inner packet only, and may or maynot contain extension
- * headers.
- *
- * Packet format (inner only):
- * <'ether type'=0x86DD
- * | 'version'=6, 'next header'=[0x3B|0x0|0x2B|0x2C|0x32|0x33|0x3C|0x87],
- * <'extension headers'>>
- */
-#define RTE_PTYPE_INNER_L3_IPV6_EXT_UNKNOWN 0x00600000
-/**
- * Mask of inner layer 3 packet types.
- */
-#define RTE_PTYPE_INNER_L3_MASK 0x00f00000
-/**
- * TCP (Transmission Control Protocol) packet type.
- * It is used for inner packet only.
- *
- * Packet format (inner only):
- * <'ether type'=0x0800
- * | 'version'=4, 'protocol'=6, 'MF'=0>
- * or,
- * <'ether type'=0x86DD
- * | 'version'=6, 'next header'=6>
- */
-#define RTE_PTYPE_INNER_L4_TCP 0x01000000
-/**
- * UDP (User Datagram Protocol) packet type.
- * It is used for inner packet only.
- *
- * Packet format (inner only):
- * <'ether type'=0x0800
- * | 'version'=4, 'protocol'=17, 'MF'=0>
- * or,
- * <'ether type'=0x86DD
- * | 'version'=6, 'next header'=17>
- */
-#define RTE_PTYPE_INNER_L4_UDP 0x02000000
-/**
- * Fragmented IP (Internet Protocol) packet type.
- * It is used for inner packet only, and may or maynot have layer 4 packet.
- *
- * Packet format (inner only):
- * <'ether type'=0x0800
- * | 'version'=4, 'MF'=1>
- * or,
- * <'ether type'=0x86DD
- * | 'version'=6, 'next header'=44>
- */
-#define RTE_PTYPE_INNER_L4_FRAG 0x03000000
-/**
- * SCTP (Stream Control Transmission Protocol) packet type.
- * It is used for inner packet only.
- *
- * Packet format (inner only):
- * <'ether type'=0x0800
- * | 'version'=4, 'protocol'=132, 'MF'=0>
- * or,
- * <'ether type'=0x86DD
- * | 'version'=6, 'next header'=132>
- */
-#define RTE_PTYPE_INNER_L4_SCTP 0x04000000
-/**
- * ICMP (Internet Control Message Protocol) packet type.
- * It is used for inner packet only.
- *
- * Packet format (inner only):
- * <'ether type'=0x0800
- * | 'version'=4, 'protocol'=1, 'MF'=0>
- * or,
- * <'ether type'=0x86DD
- * | 'version'=6, 'next header'=1>
- */
-#define RTE_PTYPE_INNER_L4_ICMP 0x05000000
-/**
- * Non-fragmented IP (Internet Protocol) packet type.
- * It is used for inner packet only, and may or maynot have other unknown layer
- * 4 packet types.
- *
- * Packet format (inner only):
- * <'ether type'=0x0800
- * | 'version'=4, 'protocol'!=[6|17|132|1], 'MF'=0>
- * or,
- * <'ether type'=0x86DD
- * | 'version'=6, 'next header'!=[6|17|44|132|1]>
- */
-#define RTE_PTYPE_INNER_L4_NONFRAG 0x06000000
-/**
- * Mask of inner layer 4 packet types.
- */
-#define RTE_PTYPE_INNER_L4_MASK 0x0f000000
-
-/**
- * Check if the (outer) L3 header is IPv4. To avoid comparing IPv4 types one by
- * one, bit 4 is selected to be used for IPv4 only. Then checking bit 4 can
- * determine if it is an IPV4 packet.
- */
-#define RTE_ETH_IS_IPV4_HDR(ptype) ((ptype) & RTE_PTYPE_L3_IPV4)
-
-/**
- * Check if the (outer) L3 header is IPv4. To avoid comparing IPv4 types one by
- * one, bit 6 is selected to be used for IPv4 only. Then checking bit 6 can
- * determine if it is an IPV4 packet.
- */
-#define RTE_ETH_IS_IPV6_HDR(ptype) ((ptype) & RTE_PTYPE_L3_IPV6)
-
-/* Check if it is a tunneling packet */
-#define RTE_ETH_IS_TUNNEL_PKT(ptype) ((ptype) & (RTE_PTYPE_TUNNEL_MASK | \
- RTE_PTYPE_INNER_L2_MASK | \
- RTE_PTYPE_INNER_L3_MASK | \
- RTE_PTYPE_INNER_L4_MASK))
-
/** Alignment constraint of mbuf private area. */
#define RTE_MBUF_PRIV_ALIGN 8
*/
const char *rte_get_rx_ol_flag_name(uint64_t mask);
+/**
+ * Dump the list of RX offload flags in a buffer
+ *
+ * @param mask
+ * The mask describing the RX flags.
+ * @param buf
+ * The output buffer.
+ * @param buflen
+ * The length of the buffer.
+ * @return
+ * 0 on success, (-1) on error.
+ */
+int rte_get_rx_ol_flag_list(uint64_t mask, char *buf, size_t buflen);
+
/**
* Get the name of a TX offload flag
*
*/
const char *rte_get_tx_ol_flag_name(uint64_t mask);
+/**
+ * Dump the list of TX offload flags in a buffer
+ *
+ * @param mask
+ * The mask describing the TX flags.
+ * @param buf
+ * The output buffer.
+ * @param buflen
+ * The length of the buffer.
+ * @return
+ * 0 on success, (-1) on error.
+ */
+int rte_get_tx_ol_flag_list(uint64_t mask, char *buf, size_t buflen);
+
/**
* Some NICs need at least 2KB buffer to RX standard Ethernet frame without
* splitting it into multiple segments.
/* define a set of marker types that can be used to refer to set points in the
* mbuf */
+__extension__
typedef void *MARKER[0]; /**< generic marker for a point in a structure */
+__extension__
typedef uint8_t MARKER8[0]; /**< generic marker with 1B alignment */
+__extension__
typedef uint64_t MARKER64[0]; /**< marker that allows us to overwrite 8 bytes
* with a single assignment */
MARKER cacheline0;
void *buf_addr; /**< Virtual address of segment buffer. */
- phys_addr_t buf_physaddr; /**< Physical address of segment buffer. */
-
- uint16_t buf_len; /**< Length of segment buffer. */
+ /**
+ * Physical address of segment buffer.
+ * Force alignment to 8-bytes, so as to ensure we have the exact
+ * same mbuf cacheline0 layout for 32-bit and 64-bit. This makes
+ * working on vector drivers easier.
+ */
+ RTE_STD_C11
+ union {
+ rte_iova_t buf_iova;
+ rte_iova_t buf_physaddr; /**< deprecated */
+ } __rte_aligned(sizeof(rte_iova_t));
- /* next 6 bytes are initialised on RX descriptor rearm */
- MARKER8 rearm_data;
+ /* next 8 bytes are initialised on RX descriptor rearm */
+ MARKER64 rearm_data;
uint16_t data_off;
/**
- * 16-bit Reference counter.
+ * Reference counter. Its size should at least equal to the size
+ * of port field (16 bits), to support zero-copy broadcast.
* It should only be accessed using the following functions:
* rte_mbuf_refcnt_update(), rte_mbuf_refcnt_read(), and
* rte_mbuf_refcnt_set(). The functionality of these functions (atomic,
* or non-atomic) is controlled by the CONFIG_RTE_MBUF_REFCNT_ATOMIC
* config option.
*/
+ RTE_STD_C11
union {
rte_atomic16_t refcnt_atomic; /**< Atomically accessed refcnt */
uint16_t refcnt; /**< Non-atomically accessed refcnt */
};
- uint8_t nb_segs; /**< Number of segments. */
- uint8_t port; /**< Input port. */
+ uint16_t nb_segs; /**< Number of segments. */
+
+ /** Input port (16 bits to support more than 256 virtual ports). */
+ uint16_t port;
uint64_t ol_flags; /**< Offload features. */
* would have RTE_PTYPE_L2_ETHER and not RTE_PTYPE_L2_VLAN because the
* vlan is stripped from the data.
*/
+ RTE_STD_C11
union {
uint32_t packet_type; /**< L2/L3/L4 and tunnel information. */
struct {
uint32_t l3_type:4; /**< (Outer) L3 type. */
uint32_t l4_type:4; /**< (Outer) L4 type. */
uint32_t tun_type:4; /**< Tunnel type. */
- uint32_t inner_l2_type:4; /**< Inner L2 type. */
- uint32_t inner_l3_type:4; /**< Inner L3 type. */
+ RTE_STD_C11
+ union {
+ uint8_t inner_esp_next_proto;
+ /**< ESP next protocol type, valid if
+ * RTE_PTYPE_TUNNEL_ESP tunnel type is set
+ * on both Tx and Rx.
+ */
+ __extension__
+ struct {
+ uint8_t inner_l2_type:4;
+ /**< Inner L2 type. */
+ uint8_t inner_l3_type:4;
+ /**< Inner L3 type. */
+ };
+ };
uint32_t inner_l4_type:4; /**< Inner L4 type. */
};
};
union {
uint32_t rss; /**< RSS hash result if RSS enabled */
struct {
+ RTE_STD_C11
union {
struct {
uint16_t hash;
uint32_t usr; /**< User defined tags. See rte_distributor_process() */
} hash; /**< hash information */
- uint32_t seqn; /**< Sequence number. See also rte_reorder_insert() */
-
/** Outer VLAN TCI (CPU order), valid if PKT_RX_QINQ_STRIPPED is set. */
uint16_t vlan_tci_outer;
+ uint16_t buf_len; /**< Length of segment buffer. */
+
+ /** Valid if PKT_RX_TIMESTAMP is set. The unit and time reference
+ * are not normalized but are always the same for a given port.
+ */
+ uint64_t timestamp;
+
/* second cache line - fields only used in slow path or on TX */
MARKER cacheline1 __rte_cache_min_aligned;
+ RTE_STD_C11
union {
void *userdata; /**< Can be used for external metadata */
uint64_t udata64; /**< Allow 8-byte userdata on 32-bit */
struct rte_mbuf *next; /**< Next segment of scattered packet. */
/* fields to support TX offloads */
+ RTE_STD_C11
union {
uint64_t tx_offload; /**< combined for easy fetch */
+ __extension__
struct {
- uint64_t l2_len:7; /**< L2 (MAC) Header Length. */
+ uint64_t l2_len:7;
+ /**< L2 (MAC) Header Length for non-tunneling pkt.
+ * Outer_L4_len + ... + Inner_L2_len for tunneling pkt.
+ */
uint64_t l3_len:9; /**< L3 (IP) Header Length. */
uint64_t l4_len:8; /**< L4 (TCP/UDP) Header Length. */
uint64_t tso_segsz:16; /**< TCP TSO segment size */
/** Timesync flags for use with IEEE1588. */
uint16_t timesync;
+
+ /** Sequence number. See also rte_reorder_insert(). */
+ uint32_t seqn;
+
} __rte_cache_aligned;
+/**< Maximum number of nb_segs allowed. */
+#define RTE_MBUF_MAX_NB_SEGS UINT16_MAX
+
/**
* Prefetch the first part of the mbuf
*
static inline uint16_t rte_pktmbuf_priv_size(struct rte_mempool *mp);
/**
- * Return the DMA address of the beginning of the mbuf data
+ * Return the IO address of the beginning of the mbuf data
*
* @param mb
* The pointer to the mbuf.
* @return
- * The physical address of the beginning of the mbuf data
+ * The IO address of the beginning of the mbuf data
*/
+static inline rte_iova_t
+rte_mbuf_data_iova(const struct rte_mbuf *mb)
+{
+ return mb->buf_iova + mb->data_off;
+}
+
+__rte_deprecated
static inline phys_addr_t
rte_mbuf_data_dma_addr(const struct rte_mbuf *mb)
{
- return mb->buf_physaddr + mb->data_off;
+ return rte_mbuf_data_iova(mb);
}
/**
- * Return the default DMA address of the beginning of the mbuf data
+ * Return the default IO address of the beginning of the mbuf data
*
* This function is used by drivers in their receive function, as it
* returns the location where data should be written by the NIC, taking
* @param mb
* The pointer to the mbuf.
* @return
- * The physical address of the beginning of the mbuf data
+ * The IO address of the beginning of the mbuf data
*/
+static inline rte_iova_t
+rte_mbuf_data_iova_default(const struct rte_mbuf *mb)
+{
+ return mb->buf_iova + RTE_PKTMBUF_HEADROOM;
+}
+
+__rte_deprecated
static inline phys_addr_t
rte_mbuf_data_dma_addr_default(const struct rte_mbuf *mb)
{
- return mb->buf_physaddr + RTE_PKTMBUF_HEADROOM;
+ return rte_mbuf_data_iova_default(mb);
}
/**
rte_atomic16_set(&m->refcnt_atomic, new_value);
}
+/* internal */
+static inline uint16_t
+__rte_mbuf_refcnt_update(struct rte_mbuf *m, int16_t value)
+{
+ return (uint16_t)(rte_atomic16_add_return(&m->refcnt_atomic, value));
+}
+
/**
* Adds given value to an mbuf's refcnt and returns its new value.
* @param m
return 1 + value;
}
- return (uint16_t)(rte_atomic16_add_return(&m->refcnt_atomic, value));
+ return __rte_mbuf_refcnt_update(m, value);
}
#else /* ! RTE_MBUF_REFCNT_ATOMIC */
+/* internal */
+static inline uint16_t
+__rte_mbuf_refcnt_update(struct rte_mbuf *m, int16_t value)
+{
+ m->refcnt = (uint16_t)(m->refcnt + value);
+ return m->refcnt;
+}
+
/**
* Adds given value to an mbuf's refcnt and returns its new value.
*/
static inline uint16_t
rte_mbuf_refcnt_update(struct rte_mbuf *m, int16_t value)
{
- m->refcnt = (uint16_t)(m->refcnt + value);
- return m->refcnt;
+ return __rte_mbuf_refcnt_update(m, value);
}
/**
void
rte_mbuf_sanity_check(const struct rte_mbuf *m, int is_header);
+#define MBUF_RAW_ALLOC_CHECK(m) do { \
+ RTE_ASSERT(rte_mbuf_refcnt_read(m) == 1); \
+ RTE_ASSERT((m)->next == NULL); \
+ RTE_ASSERT((m)->nb_segs == 1); \
+ __rte_mbuf_sanity_check(m, 0); \
+} while (0)
+
/**
- * Allocate an unitialized mbuf from mempool *mp*.
+ * Allocate an uninitialized mbuf from mempool *mp*.
*
* This function can be used by PMDs (especially in RX functions) to
- * allocate an unitialized mbuf. The driver is responsible of
+ * allocate an uninitialized mbuf. The driver is responsible of
* initializing all the required fields. See rte_pktmbuf_reset().
* For standard needs, prefer rte_pktmbuf_alloc().
*
+ * The caller can expect that the following fields of the mbuf structure
+ * are initialized: buf_addr, buf_iova, buf_len, refcnt=1, nb_segs=1,
+ * next=NULL, pool, priv_size. The other fields must be initialized
+ * by the caller.
+ *
* @param mp
* The mempool from which mbuf is allocated.
* @return
if (rte_mempool_get(mp, &mb) < 0)
return NULL;
m = (struct rte_mbuf *)mb;
- RTE_ASSERT(rte_mbuf_refcnt_read(m) == 0);
- rte_mbuf_refcnt_set(m, 1);
- __rte_mbuf_sanity_check(m, 0);
-
+ MBUF_RAW_ALLOC_CHECK(m);
return m;
}
/**
- * @internal Put mbuf back into its original mempool.
- * The use of that function is reserved for RTE internal needs.
- * Please use rte_pktmbuf_free().
+ * Put mbuf back into its original mempool.
+ *
+ * The caller must ensure that the mbuf is direct and properly
+ * reinitialized (refcnt=1, next=NULL, nb_segs=1), as done by
+ * rte_pktmbuf_prefree_seg().
+ *
+ * This function should be used with care, when optimization is
+ * required. For standard needs, prefer rte_pktmbuf_free() or
+ * rte_pktmbuf_free_seg().
*
* @param m
* The mbuf to be freed.
*/
-static inline void __attribute__((always_inline))
-__rte_mbuf_raw_free(struct rte_mbuf *m)
+static __rte_always_inline void
+rte_mbuf_raw_free(struct rte_mbuf *m)
{
- RTE_ASSERT(rte_mbuf_refcnt_read(m) == 0);
+ RTE_ASSERT(RTE_MBUF_DIRECT(m));
+ RTE_ASSERT(rte_mbuf_refcnt_read(m) == 1);
+ RTE_ASSERT(m->next == NULL);
+ RTE_ASSERT(m->nb_segs == 1);
+ __rte_mbuf_sanity_check(m, 0);
rte_mempool_put(m->pool, m);
}
+/* compat with older versions */
+__rte_deprecated
+static inline void
+__rte_mbuf_raw_free(struct rte_mbuf *m)
+{
+ rte_mbuf_raw_free(m);
+}
+
/* Operations on ctrl mbuf */
/**
* This function initializes some fields in an mbuf structure that are
* not modified by the user once created (mbuf type, origin pool, buffer
* start address, and so on). This function is given as a callback function
- * to rte_mempool_create() at pool creation time.
+ * to rte_mempool_obj_iter() or rte_mempool_create() at pool creation time.
*
* @param mp
* The mempool from which the mbuf is allocated.
* @param opaque_arg
* A pointer that can be used by the user to retrieve useful information
- * for mbuf initialization. This pointer comes from the ``init_arg``
- * parameter of rte_mempool_create().
+ * for mbuf initialization. This pointer is the opaque argument passed to
+ * rte_mempool_obj_iter() or rte_mempool_create().
* @param m
* The mbuf to initialize.
* @param i
* This function initializes some fields in the mbuf structure that are
* not modified by the user once created (origin pool, buffer start
* address, and so on). This function is given as a callback function to
- * rte_mempool_create() at pool creation time.
+ * rte_mempool_obj_iter() or rte_mempool_create() at pool creation time.
*
* @param mp
* The mempool from which mbufs originate.
* @param opaque_arg
* A pointer that can be used by the user to retrieve useful information
- * for mbuf initialization. This pointer comes from the ``init_arg``
- * parameter of rte_mempool_create().
+ * for mbuf initialization. This pointer is the opaque argument passed to
+ * rte_mempool_obj_iter() or rte_mempool_create().
* @param m
* The mbuf to initialize.
* @param i
*
* This function initializes the mempool private data in the case of a
* pktmbuf pool. This private data is needed by the driver. The
- * function is given as a callback function to rte_mempool_create() at
+ * function must be called on the mempool before it is used, or it
+ * can be given as a callback function to rte_mempool_create() at
* pool creation. It can be extended by the user, for example, to
* provide another packet size.
*
* The mempool from which mbufs originate.
* @param opaque_arg
* A pointer that can be used by the user to retrieve useful information
- * for mbuf initialization. This pointer comes from the ``init_arg``
- * parameter of rte_mempool_create().
+ * for mbuf initialization. This pointer is the opaque argument passed to
+ * rte_mempool_create().
*/
void rte_pktmbuf_pool_init(struct rte_mempool *mp, void *opaque_arg);
* Create a mbuf pool.
*
* This function creates and initializes a packet mbuf pool. It is
- * a wrapper to rte_mempool_create() with the proper packet constructor
- * and mempool constructor.
+ * a wrapper to rte_mempool functions.
*
* @param name
* The name of the mbuf pool.
return mbp_priv->mbuf_priv_size;
}
+/**
+ * Reset the data_off field of a packet mbuf to its default value.
+ *
+ * The given mbuf must have only one segment, which should be empty.
+ *
+ * @param m
+ * The packet mbuf's data_off field has to be reset.
+ */
+static inline void rte_pktmbuf_reset_headroom(struct rte_mbuf *m)
+{
+ m->data_off = RTE_MIN(RTE_PKTMBUF_HEADROOM, (uint16_t)m->buf_len);
+}
+
/**
* Reset the fields of a packet mbuf to their default values.
*
* @param m
* The packet mbuf to be resetted.
*/
+#define MBUF_INVALID_PORT UINT16_MAX
+
static inline void rte_pktmbuf_reset(struct rte_mbuf *m)
{
m->next = NULL;
m->vlan_tci = 0;
m->vlan_tci_outer = 0;
m->nb_segs = 1;
- m->port = 0xff;
+ m->port = MBUF_INVALID_PORT;
m->ol_flags = 0;
m->packet_type = 0;
- m->data_off = (RTE_PKTMBUF_HEADROOM <= m->buf_len) ?
- RTE_PKTMBUF_HEADROOM : m->buf_len;
+ rte_pktmbuf_reset_headroom(m);
m->data_len = 0;
__rte_mbuf_sanity_check(m, 1);
* Array size
* @return
* - 0: Success
+ * - -ENOENT: Not enough entries in the mempool; no mbufs are retrieved.
*/
static inline int rte_pktmbuf_alloc_bulk(struct rte_mempool *pool,
struct rte_mbuf **mbufs, unsigned count)
switch (count % 4) {
case 0:
while (idx != count) {
- RTE_ASSERT(rte_mbuf_refcnt_read(mbufs[idx]) == 0);
- rte_mbuf_refcnt_set(mbufs[idx], 1);
+ MBUF_RAW_ALLOC_CHECK(mbufs[idx]);
rte_pktmbuf_reset(mbufs[idx]);
idx++;
+ /* fall-through */
case 3:
- RTE_ASSERT(rte_mbuf_refcnt_read(mbufs[idx]) == 0);
- rte_mbuf_refcnt_set(mbufs[idx], 1);
+ MBUF_RAW_ALLOC_CHECK(mbufs[idx]);
rte_pktmbuf_reset(mbufs[idx]);
idx++;
+ /* fall-through */
case 2:
- RTE_ASSERT(rte_mbuf_refcnt_read(mbufs[idx]) == 0);
- rte_mbuf_refcnt_set(mbufs[idx], 1);
+ MBUF_RAW_ALLOC_CHECK(mbufs[idx]);
rte_pktmbuf_reset(mbufs[idx]);
idx++;
+ /* fall-through */
case 1:
- RTE_ASSERT(rte_mbuf_refcnt_read(mbufs[idx]) == 0);
- rte_mbuf_refcnt_set(mbufs[idx], 1);
+ MBUF_RAW_ALLOC_CHECK(mbufs[idx]);
rte_pktmbuf_reset(mbufs[idx]);
idx++;
+ /* fall-through */
}
}
return 0;
rte_mbuf_refcnt_update(md, 1);
mi->priv_size = m->priv_size;
- mi->buf_physaddr = m->buf_physaddr;
+ mi->buf_iova = m->buf_iova;
mi->buf_addr = m->buf_addr;
mi->buf_len = m->buf_len;
- mi->next = m->next;
mi->data_off = m->data_off;
mi->data_len = m->data_len;
mi->port = m->port;
mi->nb_segs = 1;
mi->ol_flags = m->ol_flags | IND_ATTACHED_MBUF;
mi->packet_type = m->packet_type;
+ mi->timestamp = m->timestamp;
__rte_mbuf_sanity_check(mi, 1);
__rte_mbuf_sanity_check(m, 0);
m->priv_size = priv_size;
m->buf_addr = (char *)m + mbuf_size;
- m->buf_physaddr = rte_mempool_virt2phy(mp, m) + mbuf_size;
+ m->buf_iova = rte_mempool_virt2iova(m) + mbuf_size;
m->buf_len = (uint16_t)buf_len;
- m->data_off = RTE_MIN(RTE_PKTMBUF_HEADROOM, (uint16_t)m->buf_len);
+ rte_pktmbuf_reset_headroom(m);
m->data_len = 0;
m->ol_flags = 0;
- if (rte_mbuf_refcnt_update(md, -1) == 0)
- __rte_mbuf_raw_free(md);
+ if (rte_mbuf_refcnt_update(md, -1) == 0) {
+ md->next = NULL;
+ md->nb_segs = 1;
+ rte_mbuf_refcnt_set(md, 1);
+ rte_mbuf_raw_free(md);
+ }
}
-static inline struct rte_mbuf* __attribute__((always_inline))
-__rte_pktmbuf_prefree_seg(struct rte_mbuf *m)
+/**
+ * Decrease reference counter and unlink a mbuf segment
+ *
+ * This function does the same than a free, except that it does not
+ * return the segment to its pool.
+ * It decreases the reference counter, and if it reaches 0, it is
+ * detached from its parent for an indirect mbuf.
+ *
+ * @param m
+ * The mbuf to be unlinked
+ * @return
+ * - (m) if it is the last reference. It can be recycled or freed.
+ * - (NULL) if the mbuf still has remaining references on it.
+ */
+static __rte_always_inline struct rte_mbuf *
+rte_pktmbuf_prefree_seg(struct rte_mbuf *m)
{
__rte_mbuf_sanity_check(m, 0);
- if (likely(rte_mbuf_refcnt_update(m, -1) == 0)) {
- /* if this is an indirect mbuf, it is detached. */
+ if (likely(rte_mbuf_refcnt_read(m) == 1)) {
+
if (RTE_MBUF_INDIRECT(m))
rte_pktmbuf_detach(m);
+
+ if (m->next != NULL) {
+ m->next = NULL;
+ m->nb_segs = 1;
+ }
+
+ return m;
+
+ } else if (__rte_mbuf_refcnt_update(m, -1) == 0) {
+
+ if (RTE_MBUF_INDIRECT(m))
+ rte_pktmbuf_detach(m);
+
+ if (m->next != NULL) {
+ m->next = NULL;
+ m->nb_segs = 1;
+ }
+ rte_mbuf_refcnt_set(m, 1);
+
return m;
}
return NULL;
}
+/* deprecated, replaced by rte_pktmbuf_prefree_seg() */
+__rte_deprecated
+static inline struct rte_mbuf *
+__rte_pktmbuf_prefree_seg(struct rte_mbuf *m)
+{
+ return rte_pktmbuf_prefree_seg(m);
+}
+
/**
* Free a segment of a packet mbuf into its original mempool.
*
* @param m
* The packet mbuf segment to be freed.
*/
-static inline void __attribute__((always_inline))
+static __rte_always_inline void
rte_pktmbuf_free_seg(struct rte_mbuf *m)
{
- if (likely(NULL != (m = __rte_pktmbuf_prefree_seg(m)))) {
- m->next = NULL;
- __rte_mbuf_raw_free(m);
- }
+ m = rte_pktmbuf_prefree_seg(m);
+ if (likely(m != NULL))
+ rte_mbuf_raw_free(m);
}
/**
{
struct rte_mbuf *mc, *mi, **prev;
uint32_t pktlen;
- uint8_t nseg;
+ uint16_t nseg;
if (unlikely ((mc = rte_pktmbuf_alloc(mp)) == NULL))
return NULL;
*/
static inline uint16_t rte_pktmbuf_headroom(const struct rte_mbuf *m)
{
- __rte_mbuf_sanity_check(m, 1);
+ __rte_mbuf_sanity_check(m, 0);
return m->data_off;
}
*/
static inline uint16_t rte_pktmbuf_tailroom(const struct rte_mbuf *m)
{
- __rte_mbuf_sanity_check(m, 1);
+ __rte_mbuf_sanity_check(m, 0);
return (uint16_t)(m->buf_len - rte_pktmbuf_headroom(m) -
m->data_len);
}
*/
static inline struct rte_mbuf *rte_pktmbuf_lastseg(struct rte_mbuf *m)
{
- struct rte_mbuf *m2 = (struct rte_mbuf *)m;
-
__rte_mbuf_sanity_check(m, 1);
- while (m2->next != NULL)
- m2 = m2->next;
- return m2;
+ while (m->next != NULL)
+ m = m->next;
+ return m;
}
/**
#define rte_pktmbuf_mtod(m, t) rte_pktmbuf_mtod_offset(m, t, 0)
/**
- * A macro that returns the physical address that points to an offset of the
+ * A macro that returns the IO address that points to an offset of the
* start of the data in the mbuf
*
* @param m
* @param o
* The offset into the data to calculate address from.
*/
+#define rte_pktmbuf_iova_offset(m, o) \
+ (rte_iova_t)((m)->buf_iova + (m)->data_off + (o))
+
+/* deprecated */
#define rte_pktmbuf_mtophys_offset(m, o) \
- (phys_addr_t)((m)->buf_physaddr + (m)->data_off + (o))
+ rte_pktmbuf_iova_offset(m, o)
/**
- * A macro that returns the physical address that points to the start of the
+ * A macro that returns the IO address that points to the start of the
* data in the mbuf
*
* @param m
* The packet mbuf.
*/
-#define rte_pktmbuf_mtophys(m) rte_pktmbuf_mtophys_offset(m, 0)
+#define rte_pktmbuf_iova(m) rte_pktmbuf_iova_offset(m, 0)
+
+/* deprecated */
+#define rte_pktmbuf_mtophys(m) rte_pktmbuf_iova(m)
/**
* A macro that returns the length of the packet.
return !!(m->nb_segs == 1);
}
+/**
+ * @internal used by rte_pktmbuf_read().
+ */
+const void *__rte_pktmbuf_read(const struct rte_mbuf *m, uint32_t off,
+ uint32_t len, void *buf);
+
+/**
+ * Read len data bytes in a mbuf at specified offset.
+ *
+ * If the data is contiguous, return the pointer in the mbuf data, else
+ * copy the data in the buffer provided by the user and return its
+ * pointer.
+ *
+ * @param m
+ * The pointer to the mbuf.
+ * @param off
+ * The offset of the data in the mbuf.
+ * @param len
+ * The amount of bytes to read.
+ * @param buf
+ * The buffer where data is copied if it is not contiguous in mbuf
+ * data. Its length should be at least equal to the len parameter.
+ * @return
+ * The pointer to the data, either in the mbuf if it is contiguous,
+ * or in the user buffer. If mbuf is too small, NULL is returned.
+ */
+static inline const void *rte_pktmbuf_read(const struct rte_mbuf *m,
+ uint32_t off, uint32_t len, void *buf)
+{
+ if (likely(off + len <= rte_pktmbuf_data_len(m)))
+ return rte_pktmbuf_mtod_offset(m, char *, off);
+ else
+ return __rte_pktmbuf_read(m, off, len, buf);
+}
+
/**
* Chain an mbuf to another, thereby creating a segmented packet.
*
*
* @return
* - 0, on success.
- * - -EOVERFLOW, if the chain is full (256 entries)
+ * - -EOVERFLOW, if the chain segment limit exceeded
*/
static inline int rte_pktmbuf_chain(struct rte_mbuf *head, struct rte_mbuf *tail)
{
struct rte_mbuf *cur_tail;
/* Check for number-of-segments-overflow */
- if (head->nb_segs + tail->nb_segs >= 1 << (sizeof(head->nb_segs) * 8))
+ if (head->nb_segs + tail->nb_segs > RTE_MBUF_MAX_NB_SEGS)
return -EOVERFLOW;
/* Chain 'tail' onto the old tail */
cur_tail->next = tail;
/* accumulate number of segments and total length. */
- head->nb_segs = (uint8_t)(head->nb_segs + tail->nb_segs);
+ head->nb_segs += tail->nb_segs;
head->pkt_len += tail->pkt_len;
/* pkt_len is only set in the head */
}
/**
- * Dump an mbuf structure to the console.
+ * Validate general requirements for Tx offload in mbuf.
+ *
+ * This function checks correctness and completeness of Tx offload settings.
+ *
+ * @param m
+ * The packet mbuf to be validated.
+ * @return
+ * 0 if packet is valid
+ */
+static inline int
+rte_validate_tx_offload(const struct rte_mbuf *m)
+{
+ uint64_t ol_flags = m->ol_flags;
+ uint64_t inner_l3_offset = m->l2_len;
+
+ /* Does packet set any of available offloads? */
+ if (!(ol_flags & PKT_TX_OFFLOAD_MASK))
+ return 0;
+
+ if (ol_flags & PKT_TX_OUTER_IP_CKSUM)
+ inner_l3_offset += m->outer_l2_len + m->outer_l3_len;
+
+ /* Headers are fragmented */
+ if (rte_pktmbuf_data_len(m) < inner_l3_offset + m->l3_len + m->l4_len)
+ return -ENOTSUP;
+
+ /* IP checksum can be counted only for IPv4 packet */
+ if ((ol_flags & PKT_TX_IP_CKSUM) && (ol_flags & PKT_TX_IPV6))
+ return -EINVAL;
+
+ /* IP type not set when required */
+ if (ol_flags & (PKT_TX_L4_MASK | PKT_TX_TCP_SEG))
+ if (!(ol_flags & (PKT_TX_IPV4 | PKT_TX_IPV6)))
+ return -EINVAL;
+
+ /* Check requirements for TSO packet */
+ if (ol_flags & PKT_TX_TCP_SEG)
+ if ((m->tso_segsz == 0) ||
+ ((ol_flags & PKT_TX_IPV4) &&
+ !(ol_flags & PKT_TX_IP_CKSUM)))
+ return -EINVAL;
+
+ /* PKT_TX_OUTER_IP_CKSUM set for non outer IPv4 packet. */
+ if ((ol_flags & PKT_TX_OUTER_IP_CKSUM) &&
+ !(ol_flags & PKT_TX_OUTER_IPV4))
+ return -EINVAL;
+
+ return 0;
+}
+
+/**
+ * Linearize data in mbuf.
+ *
+ * This function moves the mbuf data in the first segment if there is enough
+ * tailroom. The subsequent segments are unchained and freed.
+ *
+ * @param mbuf
+ * mbuf to linearize
+ * @return
+ * - 0, on success
+ * - -1, on error
+ */
+static inline int
+rte_pktmbuf_linearize(struct rte_mbuf *mbuf)
+{
+ int seg_len, copy_len;
+ struct rte_mbuf *m;
+ struct rte_mbuf *m_next;
+ char *buffer;
+
+ if (rte_pktmbuf_is_contiguous(mbuf))
+ return 0;
+
+ /* Extend first segment to the total packet length */
+ copy_len = rte_pktmbuf_pkt_len(mbuf) - rte_pktmbuf_data_len(mbuf);
+
+ if (unlikely(copy_len > rte_pktmbuf_tailroom(mbuf)))
+ return -1;
+
+ buffer = rte_pktmbuf_mtod_offset(mbuf, char *, mbuf->data_len);
+ mbuf->data_len = (uint16_t)(mbuf->pkt_len);
+
+ /* Append data from next segments to the first one */
+ m = mbuf->next;
+ while (m != NULL) {
+ m_next = m->next;
+
+ seg_len = rte_pktmbuf_data_len(m);
+ rte_memcpy(buffer, rte_pktmbuf_mtod(m, char *), seg_len);
+ buffer += seg_len;
+
+ rte_pktmbuf_free_seg(m);
+ m = m_next;
+ }
+
+ mbuf->next = NULL;
+ mbuf->nb_segs = 1;
+
+ return 0;
+}
+
+/**
+ * Dump an mbuf structure to a file.
*
* Dump all fields for the given packet mbuf and all its associated
* segments (in the case of a chained buffer).