*/
#include <stdint.h>
+#include <rte_common.h>
#include <rte_mempool.h>
#include <rte_memory.h>
#include <rte_atomic.h>
*
* - RX flags start at bit position zero, and get added to the left of previous
* flags.
- * - The most-significant 8 bits are reserved for generic mbuf flags
- * - TX flags therefore start at bit position 55 (i.e. 63-8), and new flags get
- * added to the right of the previously defined flags
+ * - The most-significant 3 bits are reserved for generic mbuf flags
+ * - TX flags therefore start at bit position 60 (i.e. 63-3), and new flags get
+ * added to the right of the previously defined flags i.e. they should count
+ * downwards, not upwards.
*
* Keep these flags synchronized with rte_get_rx_ol_flag_name() and
* rte_get_tx_ol_flag_name().
#define PKT_RX_HBUF_OVERFLOW (0ULL << 0) /**< Header buffer overflow. */
#define PKT_RX_RECIP_ERR (0ULL << 0) /**< Hardware processing error. */
#define PKT_RX_MAC_ERR (0ULL << 0) /**< MAC error. */
-#define PKT_RX_IPV4_HDR (1ULL << 5) /**< RX packet with IPv4 header. */
-#define PKT_RX_IPV4_HDR_EXT (1ULL << 6) /**< RX packet with extended IPv4 header. */
-#define PKT_RX_IPV6_HDR (1ULL << 7) /**< RX packet with IPv6 header. */
-#define PKT_RX_IPV6_HDR_EXT (1ULL << 8) /**< RX packet with extended IPv6 header. */
#define PKT_RX_IEEE1588_PTP (1ULL << 9) /**< RX IEEE1588 L2 Ethernet PT Packet. */
#define PKT_RX_IEEE1588_TMST (1ULL << 10) /**< RX IEEE1588 L2/L4 timestamped packet.*/
-#define PKT_RX_TUNNEL_IPV4_HDR (1ULL << 11) /**< RX tunnel packet with IPv4 header.*/
-#define PKT_RX_TUNNEL_IPV6_HDR (1ULL << 12) /**< RX tunnel packet with IPv6 header. */
#define PKT_RX_FDIR_ID (1ULL << 13) /**< FD id reported if FDIR match. */
#define PKT_RX_FDIR_FLX (1ULL << 14) /**< Flexible bytes reported if FDIR match. */
+#define PKT_RX_QINQ_PKT (1ULL << 15) /**< RX packet with double VLAN stripped. */
/* add new RX flags here */
/* add new TX flags here */
+/**
+ * Second VLAN insertion (QinQ) flag.
+ */
+#define PKT_TX_QINQ_PKT (1ULL << 49) /**< TX packet with double VLAN inserted. */
+
/**
* TCP segmentation offload. To enable this offload feature for a
* packet to be transmitted on hardware supporting TSO:
*/
#define PKT_TX_OUTER_IPV6 (1ULL << 60)
+#define __RESERVED (1ULL << 61) /**< reserved for future mbuf use */
+
#define IND_ATTACHED_MBUF (1ULL << 62) /**< Indirect attached mbuf */
/* Use final bit of flags to indicate a control mbuf */
#define CTRL_MBUF_FLAG (1ULL << 63) /**< Mbuf contains control data */
+/*
+ * 32 bits are divided into several fields to mark packet types. Note that
+ * each field is indexical.
+ * - Bit 3:0 is for L2 types.
+ * - Bit 7:4 is for L3 or outer L3 (for tunneling case) types.
+ * - Bit 11:8 is for L4 or outer L4 (for tunneling case) types.
+ * - Bit 15:12 is for tunnel types.
+ * - Bit 19:16 is for inner L2 types.
+ * - Bit 23:20 is for inner L3 types.
+ * - Bit 27:24 is for inner L4 types.
+ * - Bit 31:28 is reserved.
+ *
+ * To be compatible with Vector PMD, RTE_PTYPE_L3_IPV4, RTE_PTYPE_L3_IPV4_EXT,
+ * RTE_PTYPE_L3_IPV6, RTE_PTYPE_L3_IPV6_EXT, RTE_PTYPE_L4_TCP, RTE_PTYPE_L4_UDP
+ * and RTE_PTYPE_L4_SCTP should be kept as below in a contiguous 7 bits.
+ *
+ * Note that L3 types values are selected for checking IPV4/IPV6 header from
+ * performance point of view. Reading annotations of RTE_ETH_IS_IPV4_HDR and
+ * RTE_ETH_IS_IPV6_HDR is needed for any future changes of L3 type values.
+ *
+ * Note that the packet types of the same packet recognized by different
+ * hardware may be different, as different hardware may have different
+ * capability of packet type recognition.
+ *
+ * examples:
+ * <'ether type'=0x0800
+ * | 'version'=4, 'protocol'=0x29
+ * | 'version'=6, 'next header'=0x3A
+ * | 'ICMPv6 header'>
+ * will be recognized on i40e hardware as packet type combination of,
+ * RTE_PTYPE_L2_ETHER |
+ * RTE_PTYPE_L3_IPV4_EXT_UNKNOWN |
+ * RTE_PTYPE_TUNNEL_IP |
+ * RTE_PTYPE_INNER_L3_IPV6_EXT_UNKNOWN |
+ * RTE_PTYPE_INNER_L4_ICMP.
+ *
+ * <'ether type'=0x86DD
+ * | 'version'=6, 'next header'=0x2F
+ * | 'GRE header'
+ * | 'version'=6, 'next header'=0x11
+ * | 'UDP header'>
+ * will be recognized on i40e hardware as packet type combination of,
+ * RTE_PTYPE_L2_ETHER |
+ * RTE_PTYPE_L3_IPV6_EXT_UNKNOWN |
+ * RTE_PTYPE_TUNNEL_GRENAT |
+ * RTE_PTYPE_INNER_L3_IPV6_EXT_UNKNOWN |
+ * RTE_PTYPE_INNER_L4_UDP.
+ */
+#define RTE_PTYPE_UNKNOWN 0x00000000
+/**
+ * Ethernet packet type.
+ * It is used for outer packet for tunneling cases.
+ *
+ * Packet format:
+ * <'ether type'=[0x0800|0x86DD]>
+ */
+#define RTE_PTYPE_L2_ETHER 0x00000001
+/**
+ * Ethernet packet type for time sync.
+ *
+ * Packet format:
+ * <'ether type'=0x88F7>
+ */
+#define RTE_PTYPE_L2_ETHER_TIMESYNC 0x00000002
+/**
+ * ARP (Address Resolution Protocol) packet type.
+ *
+ * Packet format:
+ * <'ether type'=0x0806>
+ */
+#define RTE_PTYPE_L2_ETHER_ARP 0x00000003
+/**
+ * LLDP (Link Layer Discovery Protocol) packet type.
+ *
+ * Packet format:
+ * <'ether type'=0x88CC>
+ */
+#define RTE_PTYPE_L2_ETHER_LLDP 0x00000004
+/**
+ * Mask of layer 2 packet types.
+ * It is used for outer packet for tunneling cases.
+ */
+#define RTE_PTYPE_L2_MASK 0x0000000f
+/**
+ * IP (Internet Protocol) version 4 packet type.
+ * It is used for outer packet for tunneling cases, and does not contain any
+ * header option.
+ *
+ * Packet format:
+ * <'ether type'=0x0800
+ * | 'version'=4, 'ihl'=5>
+ */
+#define RTE_PTYPE_L3_IPV4 0x00000010
+/**
+ * IP (Internet Protocol) version 4 packet type.
+ * It is used for outer packet for tunneling cases, and contains header
+ * options.
+ *
+ * Packet format:
+ * <'ether type'=0x0800
+ * | 'version'=4, 'ihl'=[6-15], 'options'>
+ */
+#define RTE_PTYPE_L3_IPV4_EXT 0x00000030
+/**
+ * IP (Internet Protocol) version 6 packet type.
+ * It is used for outer packet for tunneling cases, and does not contain any
+ * extension header.
+ *
+ * Packet format:
+ * <'ether type'=0x86DD
+ * | 'version'=6, 'next header'=0x3B>
+ */
+#define RTE_PTYPE_L3_IPV6 0x00000040
+/**
+ * IP (Internet Protocol) version 4 packet type.
+ * It is used for outer packet for tunneling cases, and may or maynot contain
+ * header options.
+ *
+ * Packet format:
+ * <'ether type'=0x0800
+ * | 'version'=4, 'ihl'=[5-15], <'options'>>
+ */
+#define RTE_PTYPE_L3_IPV4_EXT_UNKNOWN 0x00000090
+/**
+ * IP (Internet Protocol) version 6 packet type.
+ * It is used for outer packet for tunneling cases, and contains extension
+ * headers.
+ *
+ * Packet format:
+ * <'ether type'=0x86DD
+ * | 'version'=6, 'next header'=[0x0|0x2B|0x2C|0x32|0x33|0x3C|0x87],
+ * 'extension headers'>
+ */
+#define RTE_PTYPE_L3_IPV6_EXT 0x000000c0
+/**
+ * IP (Internet Protocol) version 6 packet type.
+ * It is used for outer packet for tunneling cases, and may or maynot contain
+ * extension headers.
+ *
+ * Packet format:
+ * <'ether type'=0x86DD
+ * | 'version'=6, 'next header'=[0x3B|0x0|0x2B|0x2C|0x32|0x33|0x3C|0x87],
+ * <'extension headers'>>
+ */
+#define RTE_PTYPE_L3_IPV6_EXT_UNKNOWN 0x000000e0
+/**
+ * Mask of layer 3 packet types.
+ * It is used for outer packet for tunneling cases.
+ */
+#define RTE_PTYPE_L3_MASK 0x000000f0
+/**
+ * TCP (Transmission Control Protocol) packet type.
+ * It is used for outer packet for tunneling cases.
+ *
+ * Packet format:
+ * <'ether type'=0x0800
+ * | 'version'=4, 'protocol'=6, 'MF'=0>
+ * or,
+ * <'ether type'=0x86DD
+ * | 'version'=6, 'next header'=6>
+ */
+#define RTE_PTYPE_L4_TCP 0x00000100
+/**
+ * UDP (User Datagram Protocol) packet type.
+ * It is used for outer packet for tunneling cases.
+ *
+ * Packet format:
+ * <'ether type'=0x0800
+ * | 'version'=4, 'protocol'=17, 'MF'=0>
+ * or,
+ * <'ether type'=0x86DD
+ * | 'version'=6, 'next header'=17>
+ */
+#define RTE_PTYPE_L4_UDP 0x00000200
+/**
+ * Fragmented IP (Internet Protocol) packet type.
+ * It is used for outer packet for tunneling cases.
+ *
+ * It refers to those packets of any IP types, which can be recognized as
+ * fragmented. A fragmented packet cannot be recognized as any other L4 types
+ * (RTE_PTYPE_L4_TCP, RTE_PTYPE_L4_UDP, RTE_PTYPE_L4_SCTP, RTE_PTYPE_L4_ICMP,
+ * RTE_PTYPE_L4_NONFRAG).
+ *
+ * Packet format:
+ * <'ether type'=0x0800
+ * | 'version'=4, 'MF'=1>
+ * or,
+ * <'ether type'=0x86DD
+ * | 'version'=6, 'next header'=44>
+ */
+#define RTE_PTYPE_L4_FRAG 0x00000300
+/**
+ * SCTP (Stream Control Transmission Protocol) packet type.
+ * It is used for outer packet for tunneling cases.
+ *
+ * Packet format:
+ * <'ether type'=0x0800
+ * | 'version'=4, 'protocol'=132, 'MF'=0>
+ * or,
+ * <'ether type'=0x86DD
+ * | 'version'=6, 'next header'=132>
+ */
+#define RTE_PTYPE_L4_SCTP 0x00000400
+/**
+ * ICMP (Internet Control Message Protocol) packet type.
+ * It is used for outer packet for tunneling cases.
+ *
+ * Packet format:
+ * <'ether type'=0x0800
+ * | 'version'=4, 'protocol'=1, 'MF'=0>
+ * or,
+ * <'ether type'=0x86DD
+ * | 'version'=6, 'next header'=1>
+ */
+#define RTE_PTYPE_L4_ICMP 0x00000500
+/**
+ * Non-fragmented IP (Internet Protocol) packet type.
+ * It is used for outer packet for tunneling cases.
+ *
+ * It refers to those packets of any IP types, while cannot be recognized as
+ * any of above L4 types (RTE_PTYPE_L4_TCP, RTE_PTYPE_L4_UDP,
+ * RTE_PTYPE_L4_FRAG, RTE_PTYPE_L4_SCTP, RTE_PTYPE_L4_ICMP).
+ *
+ * Packet format:
+ * <'ether type'=0x0800
+ * | 'version'=4, 'protocol'!=[6|17|132|1], 'MF'=0>
+ * or,
+ * <'ether type'=0x86DD
+ * | 'version'=6, 'next header'!=[6|17|44|132|1]>
+ */
+#define RTE_PTYPE_L4_NONFRAG 0x00000600
+/**
+ * Mask of layer 4 packet types.
+ * It is used for outer packet for tunneling cases.
+ */
+#define RTE_PTYPE_L4_MASK 0x00000f00
+/**
+ * IP (Internet Protocol) in IP (Internet Protocol) tunneling packet type.
+ *
+ * Packet format:
+ * <'ether type'=0x0800
+ * | 'version'=4, 'protocol'=[4|41]>
+ * or,
+ * <'ether type'=0x86DD
+ * | 'version'=6, 'next header'=[4|41]>
+ */
+#define RTE_PTYPE_TUNNEL_IP 0x00001000
+/**
+ * GRE (Generic Routing Encapsulation) tunneling packet type.
+ *
+ * Packet format:
+ * <'ether type'=0x0800
+ * | 'version'=4, 'protocol'=47>
+ * or,
+ * <'ether type'=0x86DD
+ * | 'version'=6, 'next header'=47>
+ */
+#define RTE_PTYPE_TUNNEL_GRE 0x00002000
+/**
+ * VXLAN (Virtual eXtensible Local Area Network) tunneling packet type.
+ *
+ * Packet format:
+ * <'ether type'=0x0800
+ * | 'version'=4, 'protocol'=17
+ * | 'destination port'=4798>
+ * or,
+ * <'ether type'=0x86DD
+ * | 'version'=6, 'next header'=17
+ * | 'destination port'=4798>
+ */
+#define RTE_PTYPE_TUNNEL_VXLAN 0x00003000
+/**
+ * NVGRE (Network Virtualization using Generic Routing Encapsulation) tunneling
+ * packet type.
+ *
+ * Packet format:
+ * <'ether type'=0x0800
+ * | 'version'=4, 'protocol'=47
+ * | 'protocol type'=0x6558>
+ * or,
+ * <'ether type'=0x86DD
+ * | 'version'=6, 'next header'=47
+ * | 'protocol type'=0x6558'>
+ */
+#define RTE_PTYPE_TUNNEL_NVGRE 0x00004000
+/**
+ * GENEVE (Generic Network Virtualization Encapsulation) tunneling packet type.
+ *
+ * Packet format:
+ * <'ether type'=0x0800
+ * | 'version'=4, 'protocol'=17
+ * | 'destination port'=6081>
+ * or,
+ * <'ether type'=0x86DD
+ * | 'version'=6, 'next header'=17
+ * | 'destination port'=6081>
+ */
+#define RTE_PTYPE_TUNNEL_GENEVE 0x00005000
+/**
+ * Tunneling packet type of Teredo, VXLAN (Virtual eXtensible Local Area
+ * Network) or GRE (Generic Routing Encapsulation) could be recognized as this
+ * packet type, if they can not be recognized independently as of hardware
+ * capability.
+ */
+#define RTE_PTYPE_TUNNEL_GRENAT 0x00006000
+/**
+ * Mask of tunneling packet types.
+ */
+#define RTE_PTYPE_TUNNEL_MASK 0x0000f000
+/**
+ * Ethernet packet type.
+ * It is used for inner packet type only.
+ *
+ * Packet format (inner only):
+ * <'ether type'=[0x800|0x86DD]>
+ */
+#define RTE_PTYPE_INNER_L2_ETHER 0x00010000
+/**
+ * Ethernet packet type with VLAN (Virtual Local Area Network) tag.
+ *
+ * Packet format (inner only):
+ * <'ether type'=[0x800|0x86DD], vlan=[1-4095]>
+ */
+#define RTE_PTYPE_INNER_L2_ETHER_VLAN 0x00020000
+/**
+ * Mask of inner layer 2 packet types.
+ */
+#define RTE_PTYPE_INNER_L2_MASK 0x000f0000
+/**
+ * IP (Internet Protocol) version 4 packet type.
+ * It is used for inner packet only, and does not contain any header option.
+ *
+ * Packet format (inner only):
+ * <'ether type'=0x0800
+ * | 'version'=4, 'ihl'=5>
+ */
+#define RTE_PTYPE_INNER_L3_IPV4 0x00100000
+/**
+ * IP (Internet Protocol) version 4 packet type.
+ * It is used for inner packet only, and contains header options.
+ *
+ * Packet format (inner only):
+ * <'ether type'=0x0800
+ * | 'version'=4, 'ihl'=[6-15], 'options'>
+ */
+#define RTE_PTYPE_INNER_L3_IPV4_EXT 0x00200000
+/**
+ * IP (Internet Protocol) version 6 packet type.
+ * It is used for inner packet only, and does not contain any extension header.
+ *
+ * Packet format (inner only):
+ * <'ether type'=0x86DD
+ * | 'version'=6, 'next header'=0x3B>
+ */
+#define RTE_PTYPE_INNER_L3_IPV6 0x00300000
+/**
+ * IP (Internet Protocol) version 4 packet type.
+ * It is used for inner packet only, and may or maynot contain header options.
+ *
+ * Packet format (inner only):
+ * <'ether type'=0x0800
+ * | 'version'=4, 'ihl'=[5-15], <'options'>>
+ */
+#define RTE_PTYPE_INNER_L3_IPV4_EXT_UNKNOWN 0x00400000
+/**
+ * IP (Internet Protocol) version 6 packet type.
+ * It is used for inner packet only, and contains extension headers.
+ *
+ * Packet format (inner only):
+ * <'ether type'=0x86DD
+ * | 'version'=6, 'next header'=[0x0|0x2B|0x2C|0x32|0x33|0x3C|0x87],
+ * 'extension headers'>
+ */
+#define RTE_PTYPE_INNER_L3_IPV6_EXT 0x00500000
+/**
+ * IP (Internet Protocol) version 6 packet type.
+ * It is used for inner packet only, and may or maynot contain extension
+ * headers.
+ *
+ * Packet format (inner only):
+ * <'ether type'=0x86DD
+ * | 'version'=6, 'next header'=[0x3B|0x0|0x2B|0x2C|0x32|0x33|0x3C|0x87],
+ * <'extension headers'>>
+ */
+#define RTE_PTYPE_INNER_L3_IPV6_EXT_UNKNOWN 0x00600000
+/**
+ * Mask of inner layer 3 packet types.
+ */
+#define RTE_PTYPE_INNER_L3_MASK 0x00f00000
+/**
+ * TCP (Transmission Control Protocol) packet type.
+ * It is used for inner packet only.
+ *
+ * Packet format (inner only):
+ * <'ether type'=0x0800
+ * | 'version'=4, 'protocol'=6, 'MF'=0>
+ * or,
+ * <'ether type'=0x86DD
+ * | 'version'=6, 'next header'=6>
+ */
+#define RTE_PTYPE_INNER_L4_TCP 0x01000000
+/**
+ * UDP (User Datagram Protocol) packet type.
+ * It is used for inner packet only.
+ *
+ * Packet format (inner only):
+ * <'ether type'=0x0800
+ * | 'version'=4, 'protocol'=17, 'MF'=0>
+ * or,
+ * <'ether type'=0x86DD
+ * | 'version'=6, 'next header'=17>
+ */
+#define RTE_PTYPE_INNER_L4_UDP 0x02000000
+/**
+ * Fragmented IP (Internet Protocol) packet type.
+ * It is used for inner packet only, and may or maynot have layer 4 packet.
+ *
+ * Packet format (inner only):
+ * <'ether type'=0x0800
+ * | 'version'=4, 'MF'=1>
+ * or,
+ * <'ether type'=0x86DD
+ * | 'version'=6, 'next header'=44>
+ */
+#define RTE_PTYPE_INNER_L4_FRAG 0x03000000
+/**
+ * SCTP (Stream Control Transmission Protocol) packet type.
+ * It is used for inner packet only.
+ *
+ * Packet format (inner only):
+ * <'ether type'=0x0800
+ * | 'version'=4, 'protocol'=132, 'MF'=0>
+ * or,
+ * <'ether type'=0x86DD
+ * | 'version'=6, 'next header'=132>
+ */
+#define RTE_PTYPE_INNER_L4_SCTP 0x04000000
+/**
+ * ICMP (Internet Control Message Protocol) packet type.
+ * It is used for inner packet only.
+ *
+ * Packet format (inner only):
+ * <'ether type'=0x0800
+ * | 'version'=4, 'protocol'=1, 'MF'=0>
+ * or,
+ * <'ether type'=0x86DD
+ * | 'version'=6, 'next header'=1>
+ */
+#define RTE_PTYPE_INNER_L4_ICMP 0x05000000
+/**
+ * Non-fragmented IP (Internet Protocol) packet type.
+ * It is used for inner packet only, and may or maynot have other unknown layer
+ * 4 packet types.
+ *
+ * Packet format (inner only):
+ * <'ether type'=0x0800
+ * | 'version'=4, 'protocol'!=[6|17|132|1], 'MF'=0>
+ * or,
+ * <'ether type'=0x86DD
+ * | 'version'=6, 'next header'!=[6|17|44|132|1]>
+ */
+#define RTE_PTYPE_INNER_L4_NONFRAG 0x06000000
+/**
+ * Mask of inner layer 4 packet types.
+ */
+#define RTE_PTYPE_INNER_L4_MASK 0x0f000000
+
+/**
+ * Check if the (outer) L3 header is IPv4. To avoid comparing IPv4 types one by
+ * one, bit 4 is selected to be used for IPv4 only. Then checking bit 4 can
+ * determine if it is an IPV4 packet.
+ */
+#define RTE_ETH_IS_IPV4_HDR(ptype) ((ptype) & RTE_PTYPE_L3_IPV4)
+
+/**
+ * Check if the (outer) L3 header is IPv4. To avoid comparing IPv4 types one by
+ * one, bit 6 is selected to be used for IPv4 only. Then checking bit 6 can
+ * determine if it is an IPV4 packet.
+ */
+#define RTE_ETH_IS_IPV6_HDR(ptype) ((ptype) & RTE_PTYPE_L3_IPV6)
+
+/* Check if it is a tunneling packet */
+#define RTE_ETH_IS_TUNNEL_PKT(ptype) ((ptype) & (RTE_PTYPE_TUNNEL_MASK | \
+ RTE_PTYPE_INNER_L2_MASK | \
+ RTE_PTYPE_INNER_L3_MASK | \
+ RTE_PTYPE_INNER_L4_MASK))
+
+/** Alignment constraint of mbuf private area. */
+#define RTE_MBUF_PRIV_ALIGN 8
+
/**
* Get the name of a RX offload flag
*
typedef uint64_t MARKER64[0]; /**< marker that allows us to overwrite 8 bytes
* with a single assignment */
+/** Opaque rte_mbuf_offload structure declarations */
+struct rte_mbuf_offload;
+
/**
* The generic rte_mbuf, containing a packet mbuf.
*/
/* remaining bytes are set on RX when pulling packet from descriptor */
MARKER rx_descriptor_fields1;
- /**
- * The packet type, which is used to indicate ordinary packet and also
- * tunneled packet format, i.e. each number is represented a type of
- * packet.
+ /*
+ * The packet type, which is the combination of outer/inner L2, L3, L4
+ * and tunnel types.
*/
- uint16_t packet_type;
+ union {
+ uint32_t packet_type; /**< L2/L3/L4 and tunnel information. */
+ struct {
+ uint32_t l2_type:4; /**< (Outer) L2 type. */
+ uint32_t l3_type:4; /**< (Outer) L3 type. */
+ uint32_t l4_type:4; /**< (Outer) L4 type. */
+ uint32_t tun_type:4; /**< Tunnel type. */
+ uint32_t inner_l2_type:4; /**< Inner L2 type. */
+ uint32_t inner_l3_type:4; /**< Inner L3 type. */
+ uint32_t inner_l4_type:4; /**< Inner L4 type. */
+ };
+ };
- uint16_t data_len; /**< Amount of data in segment buffer. */
uint32_t pkt_len; /**< Total pkt len: sum of all segments. */
+ uint16_t data_len; /**< Amount of data in segment buffer. */
uint16_t vlan_tci; /**< VLAN Tag Control Identifier (CPU order) */
- uint16_t reserved;
+
union {
uint32_t rss; /**< RSS hash result if RSS enabled */
struct {
/**< First 4 flexible bytes or FD ID, dependent on
PKT_RX_FDIR_* flag in ol_flags. */
} fdir; /**< Filter identifier if FDIR enabled */
- uint32_t sched; /**< Hierarchical scheduler */
+ struct {
+ uint32_t lo;
+ uint32_t hi;
+ } sched; /**< Hierarchical scheduler */
uint32_t usr; /**< User defined tags. See rte_distributor_process() */
} hash; /**< hash information */
uint32_t seqn; /**< Sequence number. See also rte_reorder_insert() */
+ uint16_t vlan_tci_outer; /**< Outer VLAN Tag Control Identifier (CPU order) */
+
/* second cache line - fields only used in slow path or on TX */
- MARKER cacheline1 __rte_cache_aligned;
+ MARKER cacheline1 __rte_cache_min_aligned;
union {
void *userdata; /**< Can be used for external metadata */
/** Size of the application private data. In case of an indirect
* mbuf, it stores the direct mbuf private data size. */
uint16_t priv_size;
+
+ /** Timesync flags for use with IEEE1588. */
+ uint16_t timesync;
+
+ /* Chain of off-load operations to perform on mbuf */
+ struct rte_mbuf_offload *offload_ops;
} __rte_cache_aligned;
static inline uint16_t rte_pktmbuf_priv_size(struct rte_mempool *mp);
+/**
+ * Return the DMA address of the beginning of the mbuf data
+ *
+ * @param mb
+ * The pointer to the mbuf.
+ * @return
+ * The physical address of the beginning of the mbuf data
+ */
+static inline phys_addr_t
+rte_mbuf_data_dma_addr(const struct rte_mbuf *mb)
+{
+ return mb->buf_physaddr + mb->data_off;
+}
+
+/**
+ * Return the default DMA address of the beginning of the mbuf data
+ *
+ * This function is used by drivers in their receive function, as it
+ * returns the location where data should be written by the NIC, taking
+ * the default headroom in account.
+ *
+ * @param mb
+ * The pointer to the mbuf.
+ * @return
+ * The physical address of the beginning of the mbuf data
+ */
+static inline phys_addr_t
+rte_mbuf_data_dma_addr_default(const struct rte_mbuf *mb)
+{
+ return mb->buf_physaddr + RTE_PKTMBUF_HEADROOM;
+}
+
/**
* Return the mbuf owning the data buffer address of an indirect mbuf.
*
static inline struct rte_mbuf *
rte_mbuf_from_indirect(struct rte_mbuf *mi)
{
- return RTE_PTR_SUB(mi->buf_addr, sizeof(*mi) + mi->priv_size);
+ return (struct rte_mbuf *)RTE_PTR_SUB(mi->buf_addr, sizeof(*mi) + mi->priv_size);
}
/**
* details.
* @param priv_size
* Size of application private are between the rte_mbuf structure
- * and the data buffer.
+ * and the data buffer. This value must be aligned to RTE_MBUF_PRIV_ALIGN.
* @param data_room_size
* Size of data buffer in each mbuf, including RTE_PKTMBUF_HEADROOM.
* @param socket_id
* with rte_errno set appropriately. Possible rte_errno values include:
* - E_RTE_NO_CONFIG - function could not get pointer to rte_config structure
* - E_RTE_SECONDARY - function was called from a secondary process instance
- * - EINVAL - cache size provided is too large
+ * - EINVAL - cache size provided is too large, or priv_size is not aligned.
* - ENOSPC - the maximum number of memzones has already been allocated
* - EEXIST - a memzone with the same name already exists
* - ENOMEM - no appropriate memory area found in which to create memzone
m->pkt_len = 0;
m->tx_offload = 0;
m->vlan_tci = 0;
+ m->vlan_tci_outer = 0;
m->nb_segs = 1;
m->port = 0xff;
return m;
}
+/**
+ * Allocate a bulk of mbufs, initialize refcnt and reset the fields to default
+ * values.
+ *
+ * @param pool
+ * The mempool from which mbufs are allocated.
+ * @param mbufs
+ * Array of pointers to mbufs
+ * @param count
+ * Array size
+ * @return
+ * - 0: Success
+ */
+static inline int rte_pktmbuf_alloc_bulk(struct rte_mempool *pool,
+ struct rte_mbuf **mbufs, unsigned count)
+{
+ unsigned idx = 0;
+ int rc;
+
+ rc = rte_mempool_get_bulk(pool, (void **)mbufs, count);
+ if (unlikely(rc))
+ return rc;
+
+ /* To understand duff's device on loop unwinding optimization, see
+ * https://en.wikipedia.org/wiki/Duff's_device.
+ * Here while() loop is used rather than do() while{} to avoid extra
+ * check if count is zero.
+ */
+ switch (count % 4) {
+ case 0:
+ while (idx != count) {
+ RTE_MBUF_ASSERT(rte_mbuf_refcnt_read(mbufs[idx]) == 0);
+ rte_mbuf_refcnt_set(mbufs[idx], 1);
+ rte_pktmbuf_reset(mbufs[idx]);
+ idx++;
+ case 3:
+ RTE_MBUF_ASSERT(rte_mbuf_refcnt_read(mbufs[idx]) == 0);
+ rte_mbuf_refcnt_set(mbufs[idx], 1);
+ rte_pktmbuf_reset(mbufs[idx]);
+ idx++;
+ case 2:
+ RTE_MBUF_ASSERT(rte_mbuf_refcnt_read(mbufs[idx]) == 0);
+ rte_mbuf_refcnt_set(mbufs[idx], 1);
+ rte_pktmbuf_reset(mbufs[idx]);
+ idx++;
+ case 1:
+ RTE_MBUF_ASSERT(rte_mbuf_refcnt_read(mbufs[idx]) == 0);
+ rte_mbuf_refcnt_set(mbufs[idx], 1);
+ rte_pktmbuf_reset(mbufs[idx]);
+ idx++;
+ }
+ }
+ return 0;
+}
+
/**
* Attach packet mbuf to another packet mbuf.
*
mi->data_len = m->data_len;
mi->port = m->port;
mi->vlan_tci = m->vlan_tci;
+ mi->vlan_tci_outer = m->vlan_tci_outer;
mi->tx_offload = m->tx_offload;
mi->hash = m->hash;
return m2;
}
+/**
+ * A macro that points to an offset into the data in the mbuf.
+ *
+ * The returned pointer is cast to type t. Before using this
+ * function, the user must ensure that the first segment is large
+ * enough to accommodate its data.
+ *
+ * @param m
+ * The packet mbuf.
+ * @param o
+ * The offset into the mbuf data.
+ * @param t
+ * The type to cast the result into.
+ */
+#define rte_pktmbuf_mtod_offset(m, t, o) \
+ ((t)((char *)(m)->buf_addr + (m)->data_off + (o)))
+
/**
* A macro that points to the start of the data in the mbuf.
*
* The returned pointer is cast to type t. Before using this
- * function, the user must ensure that m_headlen(m) is large enough to
- * read its data.
+ * function, the user must ensure that the first segment is large
+ * enough to accommodate its data.
*
* @param m
* The packet mbuf.
* @param t
* The type to cast the result into.
*/
-#define rte_pktmbuf_mtod(m, t) ((t)((char *)(m)->buf_addr + (m)->data_off))
+#define rte_pktmbuf_mtod(m, t) rte_pktmbuf_mtod_offset(m, t, 0)
+
+/**
+ * A macro that returns the physical address that points to an offset of the
+ * start of the data in the mbuf
+ *
+ * @param m
+ * The packet mbuf.
+ * @param o
+ * The offset into the data to calculate address from.
+ */
+#define rte_pktmbuf_mtophys_offset(m, o) \
+ (phys_addr_t)((m)->buf_physaddr + (m)->data_off + (o))
+
+/**
+ * A macro that returns the physical address that points to the start of the
+ * data in the mbuf
+ *
+ * @param m
+ * The packet mbuf.
+ */
+#define rte_pktmbuf_mtophys(m) rte_pktmbuf_mtophys_offset(m, 0)
/**
* A macro that returns the length of the packet.
return !!(m->nb_segs == 1);
}
+/**
+ * Chain an mbuf to another, thereby creating a segmented packet.
+ *
+ * Note: The implementation will do a linear walk over the segments to find
+ * the tail entry. For cases when there are many segments, it's better to
+ * chain the entries manually.
+ *
+ * @param head
+ * The head of the mbuf chain (the first packet)
+ * @param tail
+ * The mbuf to put last in the chain
+ *
+ * @return
+ * - 0, on success.
+ * - -EOVERFLOW, if the chain is full (256 entries)
+ */
+static inline int rte_pktmbuf_chain(struct rte_mbuf *head, struct rte_mbuf *tail)
+{
+ struct rte_mbuf *cur_tail;
+
+ /* Check for number-of-segments-overflow */
+ if (head->nb_segs + tail->nb_segs >= 1 << (sizeof(head->nb_segs) * 8))
+ return -EOVERFLOW;
+
+ /* Chain 'tail' onto the old tail */
+ cur_tail = rte_pktmbuf_lastseg(head);
+ cur_tail->next = tail;
+
+ /* accumulate number of segments and total length. */
+ head->nb_segs = (uint8_t)(head->nb_segs + tail->nb_segs);
+ head->pkt_len += tail->pkt_len;
+
+ /* pkt_len is only set in the head */
+ tail->pkt_len = tail->data_len;
+
+ return 0;
+}
+
/**
* Dump an mbuf structure to the console.
*