-/*-
- * BSD LICENSE
- *
- * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
- * Copyright(c) 2016 6WIND S.A.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of Intel Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2010-2014 Intel Corporation.
+ * Copyright(c) 2016 6WIND S.A.
*/
#ifndef _RTE_MEMPOOL_H_
#include <inttypes.h>
#include <sys/queue.h>
+#include <rte_config.h>
#include <rte_spinlock.h>
#include <rte_log.h>
#include <rte_debug.h>
#define MEMPOOL_F_SP_PUT 0x0004 /**< Default put is "single-producer".*/
#define MEMPOOL_F_SC_GET 0x0008 /**< Default get is "single-consumer".*/
#define MEMPOOL_F_POOL_CREATED 0x0010 /**< Internal: pool is created. */
-#define MEMPOOL_F_NO_PHYS_CONTIG 0x0020 /**< Don't need physically contiguous objs. */
-/**
- * This capability flag is advertised by a mempool handler, if the whole
- * memory area containing the objects must be physically contiguous.
- * Note: This flag should not be passed by application.
- */
-#define MEMPOOL_F_CAPA_PHYS_CONTIG 0x0040
-/**
- * This capability flag is advertised by a mempool handler. Used for a case
- * where mempool driver wants object start address(vaddr) aligned to block
- * size(/ total element size).
- *
- * Note:
- * - This flag should not be passed by application.
- * Flag used for mempool driver only.
- * - Mempool driver must also set MEMPOOL_F_CAPA_PHYS_CONTIG flag along with
- * MEMPOOL_F_CAPA_BLK_ALIGNED_OBJECTS.
- */
-#define MEMPOOL_F_CAPA_BLK_ALIGNED_OBJECTS 0x0080
+#define MEMPOOL_F_NO_IOVA_CONTIG 0x0020 /**< Don't need IOVA contiguous objs. */
+#define MEMPOOL_F_NO_PHYS_CONTIG MEMPOOL_F_NO_IOVA_CONTIG /* deprecated */
/**
* @internal When debug is enabled, store some statistics.
*/
typedef unsigned (*rte_mempool_get_count)(const struct rte_mempool *mp);
-/**
- * Get the mempool capabilities.
- */
-typedef int (*rte_mempool_get_capabilities_t)(const struct rte_mempool *mp,
- unsigned int *flags);
-
/**
* Notify new memory area to mempool.
*/
typedef int (*rte_mempool_ops_register_memory_area_t)
(const struct rte_mempool *mp, char *vaddr, rte_iova_t iova, size_t len);
+/**
+ * Calculate memory size required to store given number of objects.
+ *
+ * If mempool objects are not required to be IOVA-contiguous
+ * (the flag MEMPOOL_F_NO_IOVA_CONTIG is set), min_chunk_size defines
+ * virtually contiguous chunk size. Otherwise, if mempool objects must
+ * be IOVA-contiguous (the flag MEMPOOL_F_NO_IOVA_CONTIG is clear),
+ * min_chunk_size defines IOVA-contiguous chunk size.
+ *
+ * @param[in] mp
+ * Pointer to the memory pool.
+ * @param[in] obj_num
+ * Number of objects.
+ * @param[in] pg_shift
+ * LOG2 of the physical pages size. If set to 0, ignore page boundaries.
+ * @param[out] min_chunk_size
+ * Location for minimum size of the memory chunk which may be used to
+ * store memory pool objects.
+ * @param[out] align
+ * Location for required memory chunk alignment.
+ * @return
+ * Required memory size aligned at page boundary.
+ */
+typedef ssize_t (*rte_mempool_calc_mem_size_t)(const struct rte_mempool *mp,
+ uint32_t obj_num, uint32_t pg_shift,
+ size_t *min_chunk_size, size_t *align);
+
+/**
+ * Default way to calculate memory size required to store given number of
+ * objects.
+ *
+ * If page boundaries may be ignored, it is just a product of total
+ * object size including header and trailer and number of objects.
+ * Otherwise, it is a number of pages required to store given number of
+ * objects without crossing page boundary.
+ *
+ * Note that if object size is bigger than page size, then it assumes
+ * that pages are grouped in subsets of physically continuous pages big
+ * enough to store at least one object.
+ *
+ * Minimum size of memory chunk is a maximum of the page size and total
+ * element size.
+ *
+ * Required memory chunk alignment is a maximum of page size and cache
+ * line size.
+ */
+ssize_t rte_mempool_op_calc_mem_size_default(const struct rte_mempool *mp,
+ uint32_t obj_num, uint32_t pg_shift,
+ size_t *min_chunk_size, size_t *align);
+
+/**
+ * Function to be called for each populated object.
+ *
+ * @param[in] mp
+ * A pointer to the mempool structure.
+ * @param[in] opaque
+ * An opaque pointer passed to iterator.
+ * @param[in] vaddr
+ * Object virtual address.
+ * @param[in] iova
+ * Input/output virtual address of the object or RTE_BAD_IOVA.
+ */
+typedef void (rte_mempool_populate_obj_cb_t)(struct rte_mempool *mp,
+ void *opaque, void *vaddr, rte_iova_t iova);
+
+/**
+ * Populate memory pool objects using provided memory chunk.
+ *
+ * Populated objects should be enqueued to the pool, e.g. using
+ * rte_mempool_ops_enqueue_bulk().
+ *
+ * If the given IO address is unknown (iova = RTE_BAD_IOVA),
+ * the chunk doesn't need to be physically contiguous (only virtually),
+ * and allocated objects may span two pages.
+ *
+ * @param[in] mp
+ * A pointer to the mempool structure.
+ * @param[in] max_objs
+ * Maximum number of objects to be populated.
+ * @param[in] vaddr
+ * The virtual address of memory that should be used to store objects.
+ * @param[in] iova
+ * The IO address
+ * @param[in] len
+ * The length of memory in bytes.
+ * @param[in] obj_cb
+ * Callback function to be executed for each populated object.
+ * @param[in] obj_cb_arg
+ * An opaque pointer passed to the callback function.
+ * @return
+ * The number of objects added on success.
+ * On error, no objects are populated and a negative errno is returned.
+ */
+typedef int (*rte_mempool_populate_t)(struct rte_mempool *mp,
+ unsigned int max_objs,
+ void *vaddr, rte_iova_t iova, size_t len,
+ rte_mempool_populate_obj_cb_t *obj_cb, void *obj_cb_arg);
+
+/**
+ * Default way to populate memory pool object using provided memory
+ * chunk: just slice objects one by one.
+ */
+int rte_mempool_op_populate_default(struct rte_mempool *mp,
+ unsigned int max_objs,
+ void *vaddr, rte_iova_t iova, size_t len,
+ rte_mempool_populate_obj_cb_t *obj_cb, void *obj_cb_arg);
+
/** Structure defining mempool operations structure */
struct rte_mempool_ops {
char name[RTE_MEMPOOL_OPS_NAMESIZE]; /**< Name of mempool ops struct. */
rte_mempool_enqueue_t enqueue; /**< Enqueue an object. */
rte_mempool_dequeue_t dequeue; /**< Dequeue an object. */
rte_mempool_get_count get_count; /**< Get qty of available objs. */
- /**
- * Get the mempool capabilities
- */
- rte_mempool_get_capabilities_t get_capabilities;
/**
* Notify new memory area to mempool
*/
rte_mempool_ops_register_memory_area_t register_memory_area;
+ /**
+ * Optional callback to calculate memory size required to
+ * store specified number of objects.
+ */
+ rte_mempool_calc_mem_size_t calc_mem_size;
+ /**
+ * Optional callback to populate mempool objects using
+ * provided memory chunk.
+ */
+ rte_mempool_populate_t populate;
} __rte_cache_aligned;
#define RTE_MEMPOOL_MAX_OPS_IDX 16 /**< Max registered ops structs */
unsigned
rte_mempool_ops_get_count(const struct rte_mempool *mp);
-/**
- * @internal wrapper for mempool_ops get_capabilities callback.
- *
- * @param mp [in]
- * Pointer to the memory pool.
- * @param flags [out]
- * Pointer to the mempool flags.
- * @return
- * - 0: Success; The mempool driver has advertised his pool capabilities in
- * flags param.
- * - -ENOTSUP - doesn't support get_capabilities ops (valid case).
- * - Otherwise, pool create fails.
- */
-int
-rte_mempool_ops_get_capabilities(const struct rte_mempool *mp,
- unsigned int *flags);
/**
* @internal wrapper for mempool_ops register_memory_area callback.
* API to notify the mempool handler when a new memory area is added to pool.
rte_mempool_ops_register_memory_area(const struct rte_mempool *mp,
char *vaddr, rte_iova_t iova, size_t len);
+/**
+ * @internal wrapper for mempool_ops calc_mem_size callback.
+ * API to calculate size of memory required to store specified number of
+ * object.
+ *
+ * @param[in] mp
+ * Pointer to the memory pool.
+ * @param[in] obj_num
+ * Number of objects.
+ * @param[in] pg_shift
+ * LOG2 of the physical pages size. If set to 0, ignore page boundaries.
+ * @param[out] min_chunk_size
+ * Location for minimum size of the memory chunk which may be used to
+ * store memory pool objects.
+ * @param[out] align
+ * Location for required memory chunk alignment.
+ * @return
+ * Required memory size aligned at page boundary.
+ */
+ssize_t rte_mempool_ops_calc_mem_size(const struct rte_mempool *mp,
+ uint32_t obj_num, uint32_t pg_shift,
+ size_t *min_chunk_size, size_t *align);
+
+/**
+ * @internal wrapper for mempool_ops populate callback.
+ *
+ * Populate memory pool objects using provided memory chunk.
+ *
+ * @param[in] mp
+ * A pointer to the mempool structure.
+ * @param[in] max_objs
+ * Maximum number of objects to be populated.
+ * @param[in] vaddr
+ * The virtual address of memory that should be used to store objects.
+ * @param[in] iova
+ * The IO address
+ * @param[in] len
+ * The length of memory in bytes.
+ * @param[in] obj_cb
+ * Callback function to be executed for each populated object.
+ * @param[in] obj_cb_arg
+ * An opaque pointer passed to the callback function.
+ * @return
+ * The number of objects added on success.
+ * On error, no objects are populated and a negative errno is returned.
+ */
+int rte_mempool_ops_populate(struct rte_mempool *mp, unsigned int max_objs,
+ void *vaddr, rte_iova_t iova, size_t len,
+ rte_mempool_populate_obj_cb_t *obj_cb,
+ void *obj_cb_arg);
+
/**
* @internal wrapper for mempool_ops free callback.
*
* - MEMPOOL_F_SC_GET: If this flag is set, the default behavior
* when using rte_mempool_get() or rte_mempool_get_bulk() is
* "single-consumer". Otherwise, it is "multi-consumers".
- * - MEMPOOL_F_NO_PHYS_CONTIG: If set, allocated objects won't
- * necessarily be contiguous in physical memory.
+ * - MEMPOOL_F_NO_IOVA_CONTIG: If set, allocated objects won't
+ * necessarily be contiguous in IO memory.
* @return
* The pointer to the new allocated mempool, on success. NULL on error
* with rte_errno set appropriately. Possible rte_errno values include:
* Add a virtually and physically contiguous memory chunk in the pool
* where objects can be instantiated.
*
- * If the given physical address is unknown (paddr = RTE_BAD_PHYS_ADDR),
+ * If the given IO address is unknown (iova = RTE_BAD_IOVA),
* the chunk doesn't need to be physically contiguous (only virtually),
* and allocated objects may span two pages.
*
* A pointer to the mempool structure.
* @param vaddr
* The virtual address of memory that should be used to store objects.
- * @param paddr
- * The physical address
+ * @param iova
+ * The IO address
* @param len
* The length of memory in bytes.
* @param free_cb
* On error, the chunk is not added in the memory list of the
* mempool and a negative errno is returned.
*/
+int rte_mempool_populate_iova(struct rte_mempool *mp, char *vaddr,
+ rte_iova_t iova, size_t len, rte_mempool_memchunk_free_cb_t *free_cb,
+ void *opaque);
+
+__rte_deprecated
int rte_mempool_populate_phys(struct rte_mempool *mp, char *vaddr,
phys_addr_t paddr, size_t len, rte_mempool_memchunk_free_cb_t *free_cb,
void *opaque);
* Add physical memory for objects in the pool at init
*
* Add a virtually contiguous memory chunk in the pool where objects can
- * be instantiated. The physical addresses corresponding to the virtual
- * area are described in paddr[], pg_num, pg_shift.
+ * be instantiated. The IO addresses corresponding to the virtual
+ * area are described in iova[], pg_num, pg_shift.
*
* @param mp
* A pointer to the mempool structure.
* @param vaddr
* The virtual address of memory that should be used to store objects.
- * @param paddr
- * An array of physical addresses of each page composing the virtual
- * area.
+ * @param iova
+ * An array of IO addresses of each page composing the virtual area.
* @param pg_num
- * Number of elements in the paddr array.
+ * Number of elements in the iova array.
* @param pg_shift
* LOG2 of the physical pages size.
* @param free_cb
* On error, the chunks are not added in the memory list of the
* mempool and a negative errno is returned.
*/
+int rte_mempool_populate_iova_tab(struct rte_mempool *mp, char *vaddr,
+ const rte_iova_t iova[], uint32_t pg_num, uint32_t pg_shift,
+ rte_mempool_memchunk_free_cb_t *free_cb, void *opaque);
+
+__rte_deprecated
int rte_mempool_populate_phys_tab(struct rte_mempool *mp, char *vaddr,
const phys_addr_t paddr[], uint32_t pg_num, uint32_t pg_shift,
rte_mempool_memchunk_free_cb_t *free_cb, void *opaque);
}
/**
- * Return the physical address of elt, which is an element of the pool mp.
+ * Return the IO address of elt, which is an element of the pool mp.
*
- * @param mp
- * A pointer to the mempool structure.
* @param elt
* A pointer (virtual address) to the element of the pool.
* @return
- * The physical address of the elt element.
- * If the mempool was created with MEMPOOL_F_NO_PHYS_CONTIG, the
- * returned value is RTE_BAD_PHYS_ADDR.
+ * The IO address of the elt element.
+ * If the mempool was created with MEMPOOL_F_NO_IOVA_CONTIG, the
+ * returned value is RTE_BAD_IOVA.
*/
-static inline phys_addr_t
-rte_mempool_virt2phy(__rte_unused const struct rte_mempool *mp, const void *elt)
+static inline rte_iova_t
+rte_mempool_virt2iova(const void *elt)
{
const struct rte_mempool_objhdr *hdr;
hdr = (const struct rte_mempool_objhdr *)RTE_PTR_SUB(elt,
return hdr->iova;
}
+__rte_deprecated
+static inline phys_addr_t
+rte_mempool_virt2phy(__rte_unused const struct rte_mempool *mp, const void *elt)
+{
+ return rte_mempool_virt2iova(elt);
+}
+
/**
* Check the consistency of mempool objects.
*
* of objects. Assume that the memory buffer will be aligned at page
* boundary.
*
- * Note that if object size is bigger then page size, then it assumes
+ * Note that if object size is bigger than page size, then it assumes
* that pages are grouped in subsets of physically continuous pages big
* enough to store at least one object.
*
git.droids-corp.org / dpdk.git / blobdiff