-/*-
- * BSD LICENSE
- *
- * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
- * Copyright(c) 2016 6WIND S.A.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of Intel Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2010-2014 Intel Corporation.
+ * Copyright(c) 2016 6WIND S.A.
*/
#ifndef _RTE_MEMPOOL_H_
#define MEMPOOL_F_SP_PUT 0x0004 /**< Default put is "single-producer".*/
#define MEMPOOL_F_SC_GET 0x0008 /**< Default get is "single-consumer".*/
#define MEMPOOL_F_POOL_CREATED 0x0010 /**< Internal: pool is created. */
-#define MEMPOOL_F_NO_PHYS_CONTIG 0x0020 /**< Don't need physically contiguous objs. */
+#define MEMPOOL_F_NO_IOVA_CONTIG 0x0020 /**< Don't need IOVA contiguous objs. */
+#define MEMPOOL_F_NO_PHYS_CONTIG MEMPOOL_F_NO_IOVA_CONTIG /* deprecated */
/**
* This capability flag is advertised by a mempool handler, if the whole
* memory area containing the objects must be physically contiguous.
typedef int (*rte_mempool_ops_register_memory_area_t)
(const struct rte_mempool *mp, char *vaddr, rte_iova_t iova, size_t len);
+/**
+ * Calculate memory size required to store given number of objects.
+ *
+ * If mempool objects are not required to be IOVA-contiguous
+ * (the flag MEMPOOL_F_NO_IOVA_CONTIG is set), min_chunk_size defines
+ * virtually contiguous chunk size. Otherwise, if mempool objects must
+ * be IOVA-contiguous (the flag MEMPOOL_F_NO_IOVA_CONTIG is clear),
+ * min_chunk_size defines IOVA-contiguous chunk size.
+ *
+ * @param[in] mp
+ * Pointer to the memory pool.
+ * @param[in] obj_num
+ * Number of objects.
+ * @param[in] pg_shift
+ * LOG2 of the physical pages size. If set to 0, ignore page boundaries.
+ * @param[out] min_chunk_size
+ * Location for minimum size of the memory chunk which may be used to
+ * store memory pool objects.
+ * @param[out] align
+ * Location for required memory chunk alignment.
+ * @return
+ * Required memory size aligned at page boundary.
+ */
+typedef ssize_t (*rte_mempool_calc_mem_size_t)(const struct rte_mempool *mp,
+ uint32_t obj_num, uint32_t pg_shift,
+ size_t *min_chunk_size, size_t *align);
+
+/**
+ * Default way to calculate memory size required to store given number of
+ * objects.
+ *
+ * If page boundaries may be ignored, it is just a product of total
+ * object size including header and trailer and number of objects.
+ * Otherwise, it is a number of pages required to store given number of
+ * objects without crossing page boundary.
+ *
+ * Note that if object size is bigger than page size, then it assumes
+ * that pages are grouped in subsets of physically continuous pages big
+ * enough to store at least one object.
+ *
+ * If mempool driver requires object addresses to be block size aligned
+ * (MEMPOOL_F_CAPA_BLK_ALIGNED_OBJECTS), space for one extra element is
+ * reserved to be able to meet the requirement.
+ *
+ * Minimum size of memory chunk is either all required space, if
+ * capabilities say that whole memory area must be physically contiguous
+ * (MEMPOOL_F_CAPA_PHYS_CONTIG), or a maximum of the page size and total
+ * element size.
+ *
+ * Required memory chunk alignment is a maximum of page size and cache
+ * line size.
+ */
+ssize_t rte_mempool_op_calc_mem_size_default(const struct rte_mempool *mp,
+ uint32_t obj_num, uint32_t pg_shift,
+ size_t *min_chunk_size, size_t *align);
+
/** Structure defining mempool operations structure */
struct rte_mempool_ops {
char name[RTE_MEMPOOL_OPS_NAMESIZE]; /**< Name of mempool ops struct. */
* Notify new memory area to mempool
*/
rte_mempool_ops_register_memory_area_t register_memory_area;
+ /**
+ * Optional callback to calculate memory size required to
+ * store specified number of objects.
+ */
+ rte_mempool_calc_mem_size_t calc_mem_size;
} __rte_cache_aligned;
#define RTE_MEMPOOL_MAX_OPS_IDX 16 /**< Max registered ops structs */
rte_mempool_ops_register_memory_area(const struct rte_mempool *mp,
char *vaddr, rte_iova_t iova, size_t len);
+/**
+ * @internal wrapper for mempool_ops calc_mem_size callback.
+ * API to calculate size of memory required to store specified number of
+ * object.
+ *
+ * @param[in] mp
+ * Pointer to the memory pool.
+ * @param[in] obj_num
+ * Number of objects.
+ * @param[in] pg_shift
+ * LOG2 of the physical pages size. If set to 0, ignore page boundaries.
+ * @param[out] min_chunk_size
+ * Location for minimum size of the memory chunk which may be used to
+ * store memory pool objects.
+ * @param[out] align
+ * Location for required memory chunk alignment.
+ * @return
+ * Required memory size aligned at page boundary.
+ */
+ssize_t rte_mempool_ops_calc_mem_size(const struct rte_mempool *mp,
+ uint32_t obj_num, uint32_t pg_shift,
+ size_t *min_chunk_size, size_t *align);
+
/**
* @internal wrapper for mempool_ops free callback.
*
* - MEMPOOL_F_SC_GET: If this flag is set, the default behavior
* when using rte_mempool_get() or rte_mempool_get_bulk() is
* "single-consumer". Otherwise, it is "multi-consumers".
- * - MEMPOOL_F_NO_PHYS_CONTIG: If set, allocated objects won't
- * necessarily be contiguous in physical memory.
+ * - MEMPOOL_F_NO_IOVA_CONTIG: If set, allocated objects won't
+ * necessarily be contiguous in IO memory.
* @return
* The pointer to the new allocated mempool, on success. NULL on error
* with rte_errno set appropriately. Possible rte_errno values include:
* A pointer (virtual address) to the element of the pool.
* @return
* The IO address of the elt element.
- * If the mempool was created with MEMPOOL_F_NO_PHYS_CONTIG, the
+ * If the mempool was created with MEMPOOL_F_NO_IOVA_CONTIG, the
* returned value is RTE_BAD_IOVA.
*/
static inline rte_iova_t
* of objects. Assume that the memory buffer will be aligned at page
* boundary.
*
- * Note that if object size is bigger then page size, then it assumes
+ * Note that if object size is bigger than page size, then it assumes
* that pages are grouped in subsets of physically continuous pages big
* enough to store at least one object.
*
git.droids-corp.org / dpdk.git / blobdiff